Post Base | Upgrade with THIS High-Strength Concrete Screw Anchor

[@alborzdmavandi8190]

I live in Canada and it is my pleasure to support the Canadian channel.

[@DaruDhillon]

Hello, I appreciate the support thanks! Grateful

[@alborzdmavandi8190]

@@DaruDhillon Anytime.

[@robertcochran7103]

It is really interesting to see the post base bracket being used. Thank you for this excellent video.

[@DaruDhillon]

Glad you liked it! Thanks

[@mrbreeze5556]

Great informational video Daru! I would caution you against using a chrome plated socket on an impact driver. If the chrome plating fractures during impact, the results could be severe lacerations from the sharp edges. Always use a non plated socket when using an impact!

[@DaruDhillon]

@@mrbreeze5556 appreciate you sharing your knowledge on the chrome plated socket. Good to know going forward. Thanks!

[@billj5645]

Where is all of this coming from. My father owned a garage for over 60 years and almost always used chrome plated sockets even with large impact wrenches. I've never seen a socket of any type shatter, maybe the Chinesium ones can do that but we didn't use those.

[@keletienne7947]

You should also beware of using chrome plated sockets in city environments as drive by shootings are more frequent.

[@nameless-og]

​@shannonwilliams6623 as someone who has been cut by chrome plating on sockets not even using an impact, no. It is very wise advice... and to further comment regarding the auto shop. My family had a garage too, and this was forbidden for the same reason. My FIL even told my (now BIL) that he would not be allowed to work with an impact if he will not invest in the regular uncoated impact sockets... the only exception was a set of special wheel nut sockets they had.

[@robertcochran7103]

I have real trouble believing this one. In many decades I've never once seen a chrome plated socket shatter -- or any socket, for that matter. My parents and their siblings were all blue collar. None of these folks or their friends had trouble with sockets (save for picking the right size.)

[@b5maddog]

Awesome instructions ❤

[@DaruDhillon]

@@b5maddog thank-you, glad you enjoyed it!

[@ironmartysharpe8293]

Hello Daru , Recently I installed a railing for my brother's wife going out to the patio and the patio is made with bricks and cemented in , The mounting holes were about 3/8 of an inch diameter which didn't have much play for the anchor bolts that came with it So what I did for more accuracy , After marking the holes I used a center punch and the first thing I did when I started drilling is I drilled an 1/8 inch pilot hole because the brick was rather hard material and to keep the drill bit from wandering and of course vacuumed out the holes , Then drilled the required diameter holes ,By using a center punch and drilling a pilot hole That made it alot easier to drill the holes , Especially when drilling into brick which can be really tough material , and because of the pilot holes , I didn't have to put near as much pressure on the drill , After drilling the pilot holes , The masonry bit drilled into the brick like a hot knife going through butter , I used to hate drilling masonry because the drill bit would wander and having to put alot of pressure on the drill , But using a center punch and drilling a pilot hole made a huge difference and no more problems with holes not lining up So to prevent drilling holes that won't line up and straining yourself from having to put alot of pressure on the drill , The center punch and pilot hole works wonders , Ever since I tried it I always use that method when drilling masonry , Anytime I drill into masonry or metal , I always start with a pilot hole which makes it alot easier I definitely agree with you 100% on using screws instead of nails for wood because of the much greater holding power you get with screws , There are some people that don't realize that a nail displaces wood to achieve it's holding power but over time as the wood gets old , The nail loses it's holding power But when I pick out a drill bit for the pilot hole for the screw , I drill the holes so that the screw displaces the wood a little bit which gives the screw a much better bite and keeps it from backing off , You want screws to displace wood so they have a moderately tight fit going in without splitting to achieve the best holding power

[@thivierr]

I'm curious why it seems to be the norm to drill into a new solid concrete (that you poured yourself), as opposed to installing something into it at the time it's poured, so it's embedded when the concrete dries.

[@DaruDhillon]

Wet set is standard and a good way to go. It requires more skill and isn’t adjustable.

[@huejanus5505]

Embedded anchors are arguably better, not as strong in shear, but also much harder to get them exactly where you want it, as you’re usually pouring multiple footings at once. Embedded anchors are superior for uplift and are needed on a house, not really needed on a deck.

[@joewoodchuck3824]

I agree.

[@concertgems]

You make excellent instructional videos Daru. Easy to understand and fun to watch. So keep posting please. 😍

[@DaruDhillon]

Thank you so much 🙂 More to come!

[@howtodoitdude1662]

You are the real deal! Thanks for sharing!

[@DaruDhillon]

I appreciate that! Thanks.

[@SandlGetIt]

Good job chick. The only thing i would add is that shiney chrome socket isnt impact rated. If you hammer on it, it will definitely break. Especially being that big of a size.

[@TucAdventures]

That's an awesome looking post! 🙌😅 Great video!

[@DaruDhillon]

Thanks! Glad to know I’m not alone. I do love the warmth of wood.

[@phillyfathead]

Excellent, thank you!

[@DaruDhillon]

You're very welcome!

[@inspiringbuilds]

Great tips just use an impact socket. 👍

[@louisevad6091]

Great video. I only use spax lag screws for attaching posts.

[@no_handle_required]

a KZbinr that actually works and doesn't just look good. How the hell are there only 60k subs?

[@DaruDhillon]

I’m grateful for everyone who watches and supports the channel. It’s a great joy to be able to do what I love. Thanks!

[@taoyen1579]

Is pre drilling required for the structural screw at the end of the video?

[@DaruDhillon]

@@taoyen1579 the screws at the end of the video don’t require pre-drilling. Good question, thanks!

[@bugmanmech]

Strong-Drive® SD CONNECTOR and SD CONNECTOR SS Screws booklet gives the okay to use SD fasteners on certain adjustable post bases.

[@DaruDhillon]

Thanks for the advice! Appreciate your suggestion.

[@Deepbluesky805]

Thank you!

[@DaruDhillon]

My pleasure, thanks for watching!

[@alborzdmavandi8190]

perfect work.

[@DaruDhillon]

Good to hear, thanks!

[@chrismcalister4428]

Why wouldn't you put an anchor in when pouring the concrete?

[@DaruDhillon]

@@chrismcalister4428 absolutely you can do that. This gives people the ability to adjust the base if needed.

[@yt66228]

An adorable contractor that knows what she is doing. Refreshing!

[@DaruDhillon]

Thank-you. Every day there is something to learn and I learn from these comments too. 🙏🏽

[@thenexthobby]

If for some reason you can't find an impact-rated socket, your next best option is a regular 6-pt socket. But here's the deal: Go to the store and buy an impact set so that you also reduce the chance of damaging the screw head.

[@DaruDhillon]

Thank-you for the tips on sockets. I need to this.

[@waynewatson7970]

hello and thanks for sharing the info, question for you - bought the 5/8 titen hd 6 inch bolt (THDB62600H6SS) and am going to put it into a concrete base. I also bought a 5/8 concrete bit SDS Plus.(5/8 Inch x 12 Inch SDS Plus Rotary Hammer Drill Bit). My first question is did I get the right size drill bit(5/8s) for the 5/8 titen bolt. And if so, what size socket do I need and can I use a standard dewalt (with hammer accessory) drill to drive it in. Lots of questions, be great if you could supply some info, thanks.

[@shockingguy]

Just doubled on your channel, I love your explanation of everything, spot on, and I’m laughing but I can’t tell you why cause I might get banned ha ha ha ha ha anyway keep up the good work

[@DaruDhillon]

Awesome, thank you!

[@leesmith5419]

Excellent video good instructions but I would caution against not using a impact socket

[@DaruDhillon]

@@leesmith5419 good to hear your thoughts on this topic, thanks!

[@dalebabbitt6185]

Nice video, thank you. Why do the side structural screws have such an odd looking pattern? Thanks again!!! You get a sub from me.

[@SYLB2016]

Use the bracket that goes inside of the concrete u just poured and it has straps that go up each side of your post n u bolt tge side straps to the post.😉

[@DaruDhillon]

@@SYLB2016 thanks for the tip!

[@overcome8628]

How did you do the concreate base, by the way you're really good looking.

[@DaruDhillon]

Here’s the link to mix and pour your own footings: Concrete Deck Footings | Hand Mixed Strengths Most Don’t Know kzbin.info/www/bejne/roGzf39taZp7a9E Thanks!

[@Moondoggy1941]

This looks like a great way to update my 30 year wooden patio cover I built, the mistake I made was resting the 4 x 4 post on the concrete, the straps I used come up about 10" from the ground, they are sitting on a patio cover and a 5 gallon size hole in the ground beneath it, all approved my the county. Since you are in Canada and I am near Palm Springs you can come down and do a video on up grading during your white out winter, LOL. I am just trying to be helpful.

[@DaruDhillon]

Hi to you in Florida! Would love to be in that part of the country on holiday. Good point you make about not resting the post on concrete. We have a 1" standoff requirement here. Thanks for sharing that important tip! Good to hear from you.

[@powerwagon3731]

Nice job , but I think cast in anchors are better especially in tension.

[@DaruDhillon]

Excellent choice.

[@retiredforlife63]

Should the cardboard come off the cement at some point?

[@DaruDhillon]

@@retiredforlife63 I remove the exposed cardboard with a a utility knife so it looks nice and finished.

[@gregmgm06]

Nice job on the post! It's not going anywhere.

[@DaruDhillon]

@@gregmgm06 you said it! A secure support post is a big improvement.

[@billj5645]

Simpson uses seemingly odd letter combinations for their various components although they do have some comparison with real words. There are a number of different companies that make concrete screws and each one may have different recommendations for drill bit diameter so be sure to follow those instructions.

[@DaruDhillon]

Absolutely. Important to keep in mind always!

[@jkunz27]

I LOVE my M18 Surge! P.S. why don't you use an SDS Rotary Hammer to drill the holes?

[@DaruDhillon]

That would be awesome. I’m using what I have and I I love my M18s too!

[@jkunz27]

@@DaruDhillon I bought a Rotary Hammer to install a doorbell in brick, and it was a game changer!

[@daviddrakey1686]

Great job Daru. Goodness, I don't trust that screw and cement. I'm thinking earthquake, concrete fail, the post being hit which breaks the anchor. I personally would feel better about putting the post in ground and use a dry pour or mixed cement to anchor the post. But that must be recommended. No worries!

[@DaruDhillon]

Good to hear from you David. Those all are good concerns to have. The way you do it is great too and the most cost effective. Excellent way to go.

[@billj5645]

Those anchors are extremely strong. It's a wood post- it will shatter to toothpicks before it could damage that anchor. If it was a big steel post you might want to put in more than one anchor but a wood post doesn't really need it.

[@daviddrakey1686]

@@billj5645 I thought I remembered seeing an application like that for a deck, but I thought they added the bracket before the cement set up.

[@LetTheTruthBeTold8324]

you drilled in cncrete with that?

[@DaruDhillon]

Yes, the hammer drill setting has been great. If you have a lot of drilling you can always upsize or rent.

[@LetTheTruthBeTold8324]

@@DaruDhillon your tough :)

[@joewoodchuck3824]

Is that base rust proof?

[@DaruDhillon]

It’s galvanized for exterior use. You’d get a long lifespan with it.

[@DaruDhillon]

Have you tried High-Strength Screw Anchors instead of wedge anchors for concrete? Easiest anchor to install and the base takes the pressure off it your a first timer who doesn't want wet-set.

[@_JimmyBeGood]

Just so you know my marriage proposal is still out there.

[@mlhm5]

"slide it over top" got to be Southern

[@robertjames-life4768]

I just sink in 1/2” or 5/8” galvanized L anchors when to concrete is wet. They never come loose.

[@DaruDhillon]

You’ve got skills Robert that’s a great way to go!

[@jamessickmore236]

i usually use drywall screws

[@DaruDhillon]

@@jamessickmore236 that’s my go-to after duct tape

[@jamessickmore236]

@@DaruDhillon 😁

[@5400bowen]

Thanx for showing us the latest, most expensive, least practical post base available on the market!

[@fergferguson7370]

Works ok for new concrete….not so much for 20-30 yr old stuff.

[@DaruDhillon]

Appreciate you sharing your experience. I have tested it out on old concrete and it worked well but quality of concrete varies. It needs to be solid. Good to keep in mind thanks!

[@SRCardow1]

👍

[@JoeHernandez-hw3mu]

😍

[@jamieschurr476]

I had 7 of these base plates and single bolts on my porch cover. Over the year the posts twisted and because of only one bolt it aloud the base to twist. It was very ugly and was so noticeable. Built metal posts with welded on base plates. Four anchors on each post. Forget these base plates waste of time and money. Do it once with better materials

[@DaruDhillon]

Thank-you for sharing your experience and what worked for you. It is important that the screw is well secured.

[@jerrycho9869]

how many marriage proposals have you turned down?

[@deanle604]

she could not drill the hole by the regular screws driver

[@IGOTYOBACKVR]

It’s bad when a women knows more then men these days 😂😂😂

[@emotionalintelligence776]

Yes yes for safety, but mostly durability always use proper impact sockets. The chrome version made in America can break or shatter, but exploding with a force to cause bodily injury is not only rare, but virtually unheard of. That same caution can be applied to the impact gun breaking and somehow exploding lke a grenade, its possible right, Lol. Do accidents happpen yes so wear your proper safety protection and things will go the way they go. But getting carried away with your personal life experience as fact when there 8 BILLION people around you just screams entitlement, dont be like that guy.

[@abdelmalek122]

hey Daru, I sent you an email about video editing and made a sample for you to show you my work. I was wondering if you've seen it. Any feedback is appreciated! Thanks in advance

[@wayneguy6043]

What I need is, you cutie pie❤❤❤❤❤❤❤😊

[@sonnymylovesosweat]

Y use the level 😂2mins

[@DaruDhillon]

I show people how to build, mix and pour their own concrete deck footings in the previous video. I levelled the footing when the concrete was wet. It makes installation a lot easier. I love levels. I renovate old houses where nothing is plumb, square or level. I celebrate level as a career goal!

[@GigoloBrace]

Your so cute🌹

[@deanle604]

I will not used this kind of base support specially for this woman instructor

[@brian2100]

i feel like crap

[@byever1]

Just pl the post to the footer. Nobody using a torque wrench on the job.

[@DaruDhillon]

I appreciate your feedback on the torque wrench, thanks.

[@paulmcgeoch2603]

Easy way to kill a drill/driver as the hammer function isn’t a true hammer function like an sds

[@DaruDhillon]

If you’re doing a lot of these you can always rent or buy another tool. I often drill holes for lights etc into masonry and my drill has been amazing. Good to keep in mind.