Does the heat required to cure the clear coat not affect the vinyl below or is that a special vinyl ie foil ?
@hahnrossman11723 жыл бұрын
Do you find that the vinyl shrinks at all?
@MegaCountach3 жыл бұрын
Great channel! Just joined, been p/c for @ 8 years, home gamer using a dual voltage Eastwood gun for my bikes & trucks. Cheers, Doug
@UnknownCoatings3 жыл бұрын
Nice! I appreciate the kind words
@oneoffour638 ай бұрын
Liked the demo, great powder coating tips indeed!
@KevinsKorner872 ай бұрын
So I just started powder coating. I used some of the yellow tape and like you said it was extremely difficult to get off. The line that I wanted crisp wasn’t at all crisp. You mentioned not letting it get cold so do I need to remove the tape as soon as the part comes out of the oven? I did the color and then clear, so I left the tape on for both processes. But I did let it cool before I pulled the tape. Do I need to pull and re-tape between layers or just make sure it comes off when I’m done curing the last step? Also, had some of the pinholes you had. You said “just make a quick adjustment to the gun and they’ll disappear.” What adjustments do you make to fix it?
@UnknownCoatings2 ай бұрын
not so much right when it comes out of the oven with the yellow tape, but definitely will its still warm/hot
@Pistonstrokes3 жыл бұрын
Out of the main 30 questions about powdercoating decals, I was the one who asked 27 of them. The other 3 was from my other account
@UnknownCoatings3 жыл бұрын
haha I appreciate it either way!
@cjburgh75803 жыл бұрын
Always look forward to new videos! All notifications are on!
@UnknownCoatings3 жыл бұрын
I truly appreciate it, vids every day this week!
@bduffy3332 жыл бұрын
You haven’t had any problems with the film curling up? Just wondering
@woodlanddiy84353 жыл бұрын
Can you do a video that goes over types of powders via what works well for heat, strength, look ect.? Thanks for you content its inspiring.
@UnknownCoatings3 жыл бұрын
yeah I can probably do that!
@666DAMONIC2 жыл бұрын
Wanting to get into Powder coating. Learning alot great video thanks for sharing
@UnknownCoatings2 жыл бұрын
Thanks for watching!
@garykirkby2130 Жыл бұрын
Hi great powder coating you do for a few years... I am looking to do some VINYL covers like you here...Question is there are different types of VINYL make... Which one is best to powder coat over ie make and thicknes levels Cheers Gary
@royalcoatspowdercoating3 жыл бұрын
Turned out good!
@UnknownCoatings3 жыл бұрын
I appreciate it !
@stefind5703 жыл бұрын
Great Video! Helpful info even though I'm having someone else powder coat my calipers. Subscribed. Well Done.
@wsu8568 Жыл бұрын
Thanks. This seems much more weekend DIYer friendly 😂
@asmith80883 жыл бұрын
Great vid, normal powder cure temp or lower but longer with the logos👍👍
@UnknownCoatings3 жыл бұрын
I just do normal cure cycle
@asmith80883 жыл бұрын
@@UnknownCoatings Thx.
@Nicola11793 жыл бұрын
Very nice and useful content! I'll definetely try this on my calipers 💪🏼
@UnknownCoatings3 жыл бұрын
AWesome! let me know how it goes!
@Scott46Lee3 жыл бұрын
I’ve been waiting for one of these videos! I’ve been trying this for stincels with cups (have a couple videos on my channel)
@UnknownCoatings3 жыл бұрын
nice!
@JoshTolbertUrbana3 жыл бұрын
Good stuff. Thanks for the video. Of course, I have a ton of white Oracal 651, so I guess I'll just use it for masks. I'll have to give some of the black or silver stuff a go sometime.
@UnknownCoatings3 жыл бұрын
nice!
@floridaliferich3 жыл бұрын
Have learned a lot from your videos. One question. You recommend Green Diamond 30/60 however no one will ship to Orlando, FL. Is there other blast media that can be used that's similar to the Green Diamond?
@UnknownCoatings3 жыл бұрын
maybe try 10x?
@bluehatch113 жыл бұрын
Great channel!! Really enjoying the content. Quick question, what Kv setting do you normally spray the powder at?
@UnknownCoatings3 жыл бұрын
I use the settings as recommended by the supplier. Most first coats are 40-50kv
@bluehatch113 жыл бұрын
@@UnknownCoatings thanks for the response!!
@JoshTolbertUrbana3 жыл бұрын
The tape is Kapton or polyamide tape.
@UnknownCoatings3 жыл бұрын
thats the one
@storm47103 жыл бұрын
How about using a decal as a stencil? Let's say i wanna powder coat my calipers in Oxblood Hues with Transparent Copper lettering over a Super chrome II base, the idea is Spray super chrome II Cure, add Decal, Spray Oxblood Hues, partial cure, Remove decal, Spray Transparent Copper and wipe(so that TC is only in the letters) full cure, does it sound right?
@Louie882 жыл бұрын
He has a video on this. kzbin.info/www/bejne/n6jEc5SpoLiAgsk
@4.19fishinandpowdercoating2 жыл бұрын
What vinyl do you use?
@UnknownCoatings2 жыл бұрын
oracal 651
@chriswilliamson12583 жыл бұрын
Do you cure it at a lower temp and longer duration because of the vinyl?
@UnknownCoatings3 жыл бұрын
Nope, I follow the standard cure schedule
@GIBro-mm5dj3 жыл бұрын
I just tried this last night, unfortunately there was air bubbles over the letters. Doesnt look bad, but I was able to scratch the clear right off. I used illusion shocker then clear vision.
@UnknownCoatings3 жыл бұрын
interesting, what was the vinyl type?
@MrRyannj43 жыл бұрын
Great video
@UnknownCoatings3 жыл бұрын
i appreciate it
@vickyys29663 жыл бұрын
great explanation
@UnknownCoatings3 жыл бұрын
thanks!
@DeepStageCoatings3 жыл бұрын
Two in one day? Oh and FIRST!
@UnknownCoatings3 жыл бұрын
I mean only cause I forgot to make one public the previous day lol
@ShaneWhitecloud3 жыл бұрын
Awesome!
@UnknownCoatings3 жыл бұрын
Thanks!
@78630803123 жыл бұрын
Do you rebuild the calipers and do you charge extra for piston removal ?
@UnknownCoatings3 жыл бұрын
yes each process has an associated cost.
@jeremyhaddix95613 жыл бұрын
So do you cure the clear normal temp or do you do lower temp for longer so the sticker doesn’t melt
@stlwrx3 жыл бұрын
This is what I'm wondering too....
@sabz9113 жыл бұрын
Was about to ask the same question. I get asked to do bike frames quite often but customers want custom decals on the frame. I didn’t think it’d be possible to do without it melting the decal
@UnknownCoatings3 жыл бұрын
nah, same cure schedule
@keithkristoff94192 жыл бұрын
I realize that I'm late to the game, but what was the specific clear used on these calipers
@earlcousins66353 жыл бұрын
Where do you get the "Plugs & Caps" you use for the holes? Thanks.
@UnknownCoatings3 жыл бұрын
in the video description, high temp masking supply is a sponsor, use the discount code UNKNOWN20
@flattopalpha53163 жыл бұрын
Would you advise using black iron sheets of 16 gauge 4’x8’ for $75 tax included each, to build a 4’x8’ oven? I could powder coat them. Would this work for on the cheap. Completely DELETED FBOOK. So I cannot ask questions to group any longer.
@UnknownCoatings3 жыл бұрын
you can do that for the inside, but you can run 20g on the outside just fine
@billh57013 жыл бұрын
I got some really rusty parts should I still outgas them first or sandblast them than outgas them?
@UnknownCoatings3 жыл бұрын
you can but make sure they are very clean before you do that. No grease or anything
@andrewkesler1522 Жыл бұрын
What torque do you set the 4 e-torx bolts to when reassembling the calipers?
@jhammer9293 жыл бұрын
I'm definitely trying this!! 🔥🔥👊😎
@UnknownCoatings3 жыл бұрын
let me know how it goes!
@jhammer9293 жыл бұрын
@@UnknownCoatings will do man!!👊😎
@isaacmac28233 жыл бұрын
I was in prismatics website looking at colors for my two piece style 5 wheels. Whats the easiest whit or grey to paint match since you cant powder coat the plastic center caps
@UnknownCoatings3 жыл бұрын
both should be fairly easy to match honestly.
@danielf.l13813 жыл бұрын
4K subs ??? Let’s go
@UnknownCoatings3 жыл бұрын
Oh yeah. Forgot about that lol. Well 5k here we come
@danielf.l13813 жыл бұрын
@@UnknownCoatings yessir , keep it up
@mehrshadvr42 ай бұрын
I did powder coat over decal and the decal bubbled up after curing.
@UnknownCoatings2 ай бұрын
maybe got too hot? or wrong vinyl?
@juanbrena2993 жыл бұрын
Does any vinyl work or does it have to be high temp vinyl?
@UnknownCoatings3 жыл бұрын
I dont know they make high temp vinyl, this is oracal 651. as mentioned in the video
@staticxmako3 жыл бұрын
what temp did you cure them in the end?
@UnknownCoatings3 жыл бұрын
the clear requires 375 for 12 minutes
@aldrinerwinsyah59823 жыл бұрын
Is that a vacuum of some sort in the intro of a video?
@aldrinerwinsyah59823 жыл бұрын
Minute 1:46 I mean..
@UnknownCoatings3 жыл бұрын
yes, just a small attachment that leads to a shop vac
@supremecoating3 жыл бұрын
More powder coating videos on my channel also going to make a video just for you Shawn 😂 to show you that green tape IS THE BEST TAPE
@UnknownCoatings3 жыл бұрын
lol never gonna happen cause green tape is trash lol
@supremecoating3 жыл бұрын
Lol why tho 😂 do you have a snap chat? I wanna send you quick vids of us using green tape! Love your motivation Monday’s!
@UnknownCoatings3 жыл бұрын
@@supremecoating the amber tape sticks better, comes off easier, goes around edges better, thinner so less edge. It's not even a comparison. My snap info I think is in all my video descriptions. But @unknowncoatings
@Louie882 жыл бұрын
I switched to amber. Green is to stiff and peels off in the oven sometimes.
@supremecoating2 жыл бұрын
@@Louie88 ? i never have an issue
@GGhxstyy6 ай бұрын
Are you in California?
@UnknownCoatings6 ай бұрын
Nah. Washington
@GGhxstyy6 ай бұрын
@@UnknownCoatings nooo lol
@UnknownCoatings6 ай бұрын
?
@GGhxstyy6 ай бұрын
@@UnknownCoatings it’s my reaction ? because I cant find somone in cali that does that near me
@UnknownCoatings6 ай бұрын
Oh I ship calipers a few times a week
@mikesfarmmikesfarm39773 жыл бұрын
Kapton
@jscoatings12073 жыл бұрын
#LMDB
@UnknownCoatings3 жыл бұрын
just let it
@Pistonstrokes3 жыл бұрын
The reason not a lot of viewers are subbing or liking is because you attract more haters & competition as you grow. Dont mind them, spend your energy on what you do!
@UnknownCoatings3 жыл бұрын
yeah not super concerned, just would like to see viewers click that subscribe button ultimately. the views are what matters lol