Power Jack 5000W Pure Sine Inverter Review - part3/3

[@unit042]

I was just about to buy one of these Powerjack "5000W" inverters when I decided to check for reviews to see if it really was what it was hyped up to be on its ebay page, and ended up on this review series. Thank you so much Knurlknar24, you have saved me a wad of cash, time, and a great deal of heartbreak on this piece of junk. There's no way I would bet my life on one of these units for operating my well water pump during a power outage. Keep up the good work!

[@claythomas7982]

I want to thank you for the service you provide. I don't like to read books about electricity, it goes right over my head. With this approach I get a picture and a voice. Your knowledge is up there and has helped me obtain what I need to boondock in my bounder. Right now I'm trying to find a remote on/off switch for my 5000 watt potek inverter.

[@mikechristensen9744]

Your video reviews were extremely helpful. I had purchased a pure sine wave xantrex 2000 watt inverter a while back and found that it could not fully utilize the batteries power as it would turn off at about 11 volts. After watching your videos I now know that I can most likely remedy this with a potentiometer it has internally.(once I fix the blown capacitors and mosfets!). So much for purchasing a well known and respectable brand name!! I decided to buy a larger modified sine inverter and would never have thought to buy a PowerBright brand...just sounded like another cheap and over rated inverter to me. This 6000 Watt inverter is great! I can run everything I want on it at the same time...several lights, small fridge, small freezer, Keurig coffee maker, and then start up my 1/2 HP well pump and washing machine without issue although the lights will dim ever so slightly when the pump starts. The inverter stays completely cool to the touch. The fans are large and fairly quiet when running...and there are two of them - one at each end which I have never seen before. The price currently is about $500.00 now and well worth it. So far none of my electronics have an issue with the modified sine wave so it must be of decent quality as well...this includes all of my variable speed power tools which have had issues with other modified sine wave inverters I have had. Thanks again for your time in creating these videos.

[@mikechristensen9744]

I just realized I should have posted this comment on the prior video.

[@Coolkeys2009]

Not that it would have made much difference. Some of those cheap noisy fans are noisy because there very high flow fans. I recently found this out when I tried to swap the noisy fan in my power supply with a better quality one. Also I'm not a fan of reversing the air flow of fans, on my experiments with PC's I always found the exhaust fans were the only one's that really mattered(reversing the air flow was disastrous). So if the designers had the fan exhausting from the case I would have left it that way. Anyway interesting fix tour and review. POWER Jack!

[@threeredstars]

I think maybe they marketed the product wrong. Instead of it being just an Inverter they should give it a dual purpose Inverter / Space heater designation. That would really up the efficiency rating!!! What do you think? HAHAHA

[@1981therealfury]

So basically its an 800 watt inverter with a high surge rating... what a load of old rubbish, not even worth it at the knock off price.

[@pomonabill220]

When you started the saw, my ears blew out!!! OUCH!!! So much for headphones!

[@hotdogandahayride9823]

Just like every flashlight, bike light or switchmode power supply I've tried from an unknown Chinese company, the advertised numbers are arbitrary. It's good to see people like knurlgnar exposing these products for what truly are.

[@urgentcareguy3]

Love the videos. Maybe you can help me. I noticed that Powerjack inverters are shown in pictures being used in beach water. It would appear that they can be used for surf boards and attract young Chinese girls. Have you tried the high surf 10kw hand ten option yet and do you find yourself surrounded by young Chinese girls ?

[@adlerweb]

The 3000w inverter advertised for motors was a LF design

[@glennrwright]

I was about to buy one of these in a 8000w version but now I will be looking a little more carefully at other makes. Thank you for a very interesting series.

[@BobsEVGarage]

Keep in mind that the LF inverter that Powerjack sells contains mains-frequency transformers. They are far more capable when dealing with inductive surges. It would be quite interesting to see inside one of those inverters.

[@Cabmaker]

The Chinese to English conversions are hilarious I was laughing my butt off. Thanks for the great video and test

[@gunlover1955]

You have to love the chart!

[@spencoid1]

If you like that chart you would probably like the book on Chinglish that i recently got at Goodwill.

[@blmeflmm66]

Another good series. I think it'd be interesting to see how this unit performs with a high performance(high CFM) fan in exhaust mode. It's been my experience that quieter fans are quieter because they simply aren't pushing as much air. I learned that through experience by installing a top rated fan in a portable ice maker. The high quality fan was much quieter, but wasn't pushing/pulling enough air to cool the unit and it's performance suffered way more than I would have imagined. How about making a Knurlgnar24 buyer's guide/ratings index that lists the equipment you test so we can get a snapshot of the best, worst, and middling equipment capabilities vs. cost? And/or a Knurlgnar24 favorites/recommended list? Keep up the good work.

[@Migueldeservantes]

I'm extremely grateful for your videos you certainly have truly educated me about it, keeping in mind that I'm one of those stupid people that pay for two of the 10Kwatts! thank you very very much!

[@markjob6354]

I'm wondering if the rapid overheating is the result of something else malfunctioning on one of the circuit boards ? Perhaps a resistor or a capacitor, or even a transistor ?

[@lappieslabuschagne2428]

Than you for going through all the trouble and helping me not to waste my hard earned money on that piece of junk. Keep up the good work. Tnx again

[@asusreviews]

Have you done any tests with the air compressor on various when it is attempting to represurize air when it is already at a high PSI. E.g. Start the compressor at 100 PSI and have it charge the compressor to 120-150 or wahtever its rated for. I found that one of my inverters can start my compressor fine, but can't start it when the pressure of the compressor is above like 50 PSI.

[@smallenginedude71]

i am looking for a high quality inverter that will need to run pretty much 24/7. I am looking at samlex units. What other brands would you suggest?

[@HDXFH]

Giandel and edecoa are okay cheap inverters, they will deliver their advertised power and seem well built for the price

[@DCBpower]

If you get your inverter shipped, take the cover off and make sure it's not damaged or poorly constructed before powering up. I just got one where the FETs weren't mounted to the heat sink.

[@knurlgnar24]

I've seen that too. I usually open up inexpensive inverters to check for this sort of issue before powering up.

[@77appyi]

it not start the compressor up the second time as the compressor will not unload the pressure it made the 1st time if you pull the the plug

[@rich1051414]

+david appleton Well yeah, it could only borderline start it, the extra startup load put it over that limit.

[@knurlgnar24]

This air compressor has no pressure release - it always starts up into pressure. The only changes were that the motor was warmer and the pressure was a few PSI higher.

[@3D6Space]

Why are you picking on this manufacturer? I love the idea of a warning LAB - LEE! lol .... PS - your videos are awesome... I am learning a lot from your pain! Thank you!

[@NiHaoMike64]

The results seem in line with what you might expect out of a "5kW" consumer audio duty power converter. Which is indeed one possible niche - powering audio equipment. But keep in mind that generally only analog audio equipment actually need sine wave to avoid EMI. The digital stuff pretty much always run fine with modified sine.

[@knurlgnar24]

Despite its drawbacks I do think that this product would be good for certain applications. Powering audio equipment could be one of them.

[@ElectronPower]

Wouldn't adding one or two more batteries to keep the input voltage higher help to keep the output voltage a bit higher and thus increase the power output at least slightly? I know that the controller should maintain steady output voltage, regardless of the input voltage but since it clearly doesn't, maybe it would be worth giving it another shot with a more capable battery bank that can keep the voltage a bit higher. Nice review, btw.

[@ClearChannelNews]

I believe Power Jack has addressed burnout issues with the need to use a 48v set up for hard to start loads. The lower voltage designs, 12v and 24v don't provide the sustained voltage needed for heavy loads. I think you are right with your suggestion.

[@lancehuttsell3878]

I had one like this years ago and you had to ground the frame to ground to get it to work right and have the engine running, higher voltage...??? then it worked fine...?

[@JOHNDANIEL1]

Power Jack, Wagen tech, AIMS, and DURAFRIED make awesome learning tools. You learn how to repair or recycle!

[@SedatedByLife]

I'm glad I came across this particular series of videos. I was considering this model for an inverter but was very unsure as to its capabilities and quality. I know it's been a long time but how is the samlex performing?

[@monosurge]

I'm looking at the 3000w LF split phase so these videos have helped. I have a few observations, though. First, I wouldn't have reversed the air flow direction. The arrangement from the factory draws cool external air across the output filters first. This is important as they will run the hottest. Also, have you confirmed the supply line you modified for a higher dropout isn't part of the thermal regulation circuit? It could need recalibrated now. Do you recall the part number on the output MOSFET? I'd like to take a look at the data sheet. Thanks!

[@remaundostewart3193]

YEAH. THAT IS A GOOD POINT! ACTUALLY WOULD BE BEST TO HAVE 2 FANS.

[@aday1637]

@@remaundostewart3193 Would be better to test a new unaltered unit, too.

[@kd5inm]

Turn fan around and retest please

[@OffGridAussiePrepper]

wow... ur asking alot KD.... retest again?? anyway good show Mr Gnurlgnar, and what nationality r u??

[@knurlgnar24]

Off Grid Texas Homestead It is arguable whether turning the fan around would change the result and by how much, however as fast as this inverter overheated at a mere 1kw it is exceedingly clear that it would not make a substantial difference.

[@kd5inm]

I think its unfair to test it and make a judgement call on the product without putting it back as close to original design as possible. You may well be right, it might not make a difference but by turning the fan you have made a design change and its not operating under original design parameters. I say that pulling heat away from and out of the cabinet may make a difference. Its worth investigating. We could all learn from it, I appreciate your effort and the time it takes to make these videos. I enjoy them very much. Kd

[@smallenginedude71]

is this your inverter? no exactly so deal with it.

[@kd5inm]

All I asked was to turn the fan around, I learn from videos like this. I appreciate what knurlgnar24 does and I thought it was a simple and easy request, no it isn't my inverter, but who rattled your chain and asked for your snide remark smallenginedud?

[@herbertvonsauerkrautunterh2513]

I have s 3500w powerjack and it runs a 2400w 240v vacuum... Good enough for planned use running my home light circuit of led lights and possibly some powerpoints via a changeover switch for blackouts....

[@superbaron01]

I couldn't help but noticed that @14:18 when u started the saw u went into slasher mode and it seems all to convincing u might enjoyed it..lol keep these vids coming thanks for the entertainment

[@knurlgnar24]

superbaron01 Yea, I likes cuttin' stuff

[@ksafarian]

Great video and great job...keep up the good work mate, BTW I am retired electronics engineer from Sydney Australia, I received one of these units "Power Jack PSW-5000" Inverter 12V-240VAC, unfortunately someone has been into it and missing (Q9,Q10,Q11 & Q12) Mosfets. cannot fine schematics to identify the Mosfets labelling.

[@knurlgnar24]

Which are the Q9-12 FETs? Input or output stage, size, etc? I do not remember specific Q numbers on the circuit boards anymore.

[@ksafarian]

***** Thank you for your prompt response.

[@JulienDeon]

great thorough discussions and evaluations.. alot of things i had wondered before have been cleared up now!

[@trinamcdonald5686]

Hi, I just got a power jack 8000 watt LF split phase inverter. The Instructions are NOT good. I wish to use it as a UPS/ battery charger. Do I wire direct to my house panel using L1, L2, N and leave the grid mains on? Why are there AC in connections if this is correct? I am more than confused and I have seen alot of your vids, you seem to know the most about this.

[@MrRacinjason12345]

So would a modified sine wave inverter be better for a continuous load instead of a pure sine wave? Does a pure sine wave produce more heat?

[@kevinbeckenham3872]

Sensible load test for the inverter should be a main's powered 250 amp arc welder ?

[@luistoribio4788]

para que el inversor prenda la nevera,se puede hacer corto circuito de base con 7.5v culo(7.500w)

[@brettmaxfield2974]

Inductive loads (things with motors) you always need to spec double the wattage with the inverter, as the wattage quoted on those loads in an average value, they all draw double their rating (read much more) for a short time on startup, that is not shown on an average current draw figure. Thats true with any inverter and things with motors or heating elements, which require a large rush of current to start. You will either blow a fuse or destroy your inverter, as you are doubling the average rated power of the appliance for a very brief time at startup.

[@MrKenberk]

Dave you've talked me out of every inverter I see. what do you suggest. I'm trying to get one with direct connect also if possible.

[@John-gm8ty]

I'd say that given the tiny vent hols at the other end of the fan, it just can't push enough air through to cool the system. maybe it's time for some modding? take a big section of the rear out and replace it with mesh so it has much more air flow capacity. maybe even put another fan on that end? get some serious airflow going and run some more tests.

[@DMAN22yeah]

+John Douglas push pull fans are pointless

[@John-gm8ty]

pointless? how? how do you think heatsinks work exactly?

[@DMAN22yeah]

John Douglas a fan on the intake and a fan on the outtake will only blow as much air as 1 fan

[@John-gm8ty]

while this is true, it also creates greater air turbulence (at both ends) which increases cooling.

[@nyghtmyst5118]

what is a good inverter for a solar set up ?? is a low frequency inverter better for a solar application

[@dgholmz]

Could you do a review of a Cotek 1500 watt 24 volt ? They are affordable ($220 ish) now and look well built.

[@knurlgnar24]

Cotek makes good stuff. Unfortunately I do not anticipate reviewing one in the near future.

[@drsaif343]

As usual, a new hit, loved your critical approach, trials for improvement, and i wish you try to go a little deeper when it comes to improving performance, and tell us dose it really worth to boost this poorly made inverter t o be a really good quality 5000 Watt?

[@knurlgnar24]

It isn't often worth modifying inverters to improve their performance because the components they 'cheaped out' on are generally not easily obtainable or inexpensive.

[@shartne]

Great review good job. I always thought they were not any good from ebay feedbacks. I would not get one ever.

[@fbbmkiminawit7468]

Hi, do you have any recommendation what brand of inverter I should buy or do you assemble inverter that I can buy?

[@GTVAlfaMan]

Great review. Can you tell us the make of that power strip with the voltage display and where can we find it?

[@mreevimusq]

It’s called a kilo watt meter can be bought harbor freight and many other places. It is plugged into what looks like a standard surge protector strip

[@johnniebray6360]

Could you tell me if there is a difference in the amount of watts you draw from your battery set up is more with a larger, say 2ooowt invertor as opposed to using a smaller say 400wt inverter or would it be the same draw from the battery depending on what is pluged into the inverter sorry about spelling, in short would a smaller inverter use up less wattage from the battery if any additional wattage because of being a larger unit.

[@tonysorcinelli]

Thanks for the review! I have been using a power jack 1500 watt inverter infrequently for the past 6 years and it has worked great for me. That's why when I wanted to upgrade I was looking at power jack again. Are you sure the inverter was over heating and not low voltage cut off in your tests? Just 2 batteries run down quick even with a 45 amp charger. What type of inverter do you recommend?

[@DMAN22yeah]

+Tony S yes, it was overheating. that capacity of battery is adequate for that test

[@gsmgsa]

Hi! Do you know any sites that have schematics on power inverters? I want to know what modification to make to make a grid tie inverter function as off grid inverter, if possible. It's a Socomec sunsys home 3965 grid tie inverter. Any help appreciated.

[@phinok.m.628]

Well, the 5000 Watts are supposed to be continuously. Given that it can apparently power 1000 Watts continuously. I would say it's rather a 1000 Watt inverter with fairly high surge and short term power capabilities.

[@BentonL]

knurlgnar24 Do you know of a cheap inverter than can run a few lights, a skill saw, and an air compressor(heavy use) for several hours. My generator is an old Coleman 5500, but i would much rather just idle my truck and not lug it around. I am looking for a decent cheap inverter that can run as good as my generator. An answer would be greatly appreciated. Thx.

[@gabrielmartinez3171]

Quick uninformed question I have not seen the other videos but are the outputs in parallel or separate? Even with a pure sine wave inverter it should roughly handle 15 to 20 Amps per outlet saying it's a 5000 watt inverter means it can should handle 20 amps per outlet. Also it needs more batteries and a stronger power source providing the proper amperage to the batteries at 5000watts that inverter should be pulling over 450 amps from the batteries.

[@knurlgnar24]

Parallel

[@errolcain4071]

Hi Bro, Have you ever test a whisler xp2000i inverte, if so what is your finding,,,,thanks in advance

[@CraigMansfield]

I laughed every time you said "warning lablee" haha

[@bexler531]

I need to replace my Heart interface freedom 20 2000 watt inverter/ charger I have 50 amp power supply will this unit be the right one or do I need to buy another model?

[@BH4x0r]

if you still have this inverter, i have an idea: since you said most 3kW inverters can't start those big devices, make a switching circuit with a contactor, so it switches to one of your 3kW inverters, like using it to get devices that need a big surge running, and then keep em running with a higher quality inverter

[@jedics1]

I like your vidz but none of the better brands you talk about seem to be in Australia unfortunately. Going by your reviews, if the costs are good, would you recommend finding 2 lower wattage more efficient inverters and running them together rather than a single bigger one? I want to build a completely off grid system and looking into if I should go all 240v inverted which I like the idea of or some 12v for the fridge and lights, or perhaps 24v as ive heard inverters run much more efficiently this way.

[@harleyd500]

I haven't checked the Warning Lable on my Magnum 2800 Inverter/charger. Can I run a light bulb with it? They don't include a gold medal on the case declaring it "best". I'm scared...

[@MS-oz2wu]

24:52 Do you have some recommendations for inverters. I'd like one for a commercial truck, to run a small refrigerator, microwave, or over head ac? Not all at once though, unless its reasonably possible. I'd like to run the ac for 8 to 10 hrs or more if possible. Thanks for your vid.

[@knurlgnar24]

Running an overhead AC will require a MASSIVE battery bank or running the truck overnight to keep things charged. Other than that I'd recommend at least a 3000W pure sine inverter since the ratings on nearly all inverters are not honest. I wish I were more up to date with current models but beware that most 3000W inverters cannot provide even 1500W reliably. You'll have to do some research to know which ones are honest and which are not. A good 3KW inverter should run your AC plus other loads without issue assuming good batteries while less just isn't going to do it for you. I'd also recommend staying away from 'low frequency' inverters. They don't do well in mobile applications and have a higher no-load parasitic draw.

[@MS-oz2wu]

@@knurlgnar24 how can you tell if a unit is low frequency? Thanks a lot. That's helpful enough to get me started.

[@goofykl9]

Great vid, have you reviewed any xantrex sw series, I need some pointers on how it works so I can maybe repair mine.

[@knurlgnar24]

I am sorry to say that I have not yet attempted to repair a SW inverter.

[@neilross8860]

Dalton Simpson

[@THJCustomz]

I need a Good inverter for My work truck. 20 gallon Compressor. Power tools. Lights. Mini fridge. Small microwave. What do U recommend?

[@calito20000]

So what's the best mane brand please I will be relying on one or two maybe more for off grid living

[@JoseGarcia-px9xj]

today is almost the end of 2017, have you made another revision of this brand. They told me they improved

[@prentisswallace2890]

Hey my name is Prentiss and I have a question I am running 4075 Watts what size inverter do you think I need. The items that I am running are a water pump air pump + 2 element heaters please help me I really need your help

[@prentisswallace2890]

Hey my name is Prentiss and I have a question I am running 4075 Watts what size inverter do you think I need. The items that I am running are a water pump air pump + 2 element heaters please help me I really need your help? May you please respond to me.

[@stevezphone]

Very practical and informative tests. Thanks!

[@musclesmouse]

you trust the inverter alone in your home?

[@themathanalyst5900]

It obvious from the zoom at 1:43-1:50 that this is not the same inverter. Nowhere did I see it say "BEST" on the top :)

[@hotdogandahayride9823]

themathanalyst Get your eyes checked.

[@themathanalyst5900]

HotdogAnd aHayride sarcasm, meet hotdog. hotdog may I present sarcasm.

[@hotdogandahayride9823]

Now would be a great time to misuse the word ironic.

[@themathanalyst5900]

No, now is the time to use the meme "Fail troll is fail"

[@hotdogandahayride9823]

themathanalyst Coherent thought is not your bag, neither is originality. My work is done here.

[@FroilanWINDSOLAR]

sir, can you convert a modified sine inverter into pure sine?

[@turbosucks]

which is the most powerful 12 volt to 120 volt that I can get?

[@stevetipps5876]

you must be in Canada, here in the states we use farenheit

[@MrBrentles]

Far out I wish I had your brain. I had a Giandel inverter and threw it away because it stopped working. I'd love to be able to fix electronic stuff. I have an old Technics amplifier that sounded amazing and I want to get fixed.

[@Revoku]

I got a flash light that is over 250w, its using 4 100w LED chips, and requires a shoulder strap lol (also burnt out 3 of those cheap 150w dc-dc boost converter boards before I bothered to get a 600w board)

[@JamesLewis]

I'm curious, what is the multimeter you are using in these videos?

[@knurlgnar24]

Craftsman model 82289. It is long ago discontinued but you may be able to find it used.

[@JamesLewis]

***** Thanks... I bought a really nice meter before going to Uni and I realised that next year it will be 25 years old! I have been thinking of replacing it and I like the idea of a meter that is mainly a DMM with ancilary waveform display... but all I can find on sale now are hand held osciloscopes with ancilary DMM functions which is really not so practical.

[@monosurge]

+James Lewis I know it's been a year, but it's a WENS OEM'd scopemeter. WENS is a select OEM for EXTECH and EXTECH rebadged and supplied the majority of Craftsman meters. So you could look for the EXTECH 381270 or a WENS 33N or comparable model.

[@JamesLewis]

monosurge Thanks!

[@monosurge]

+James Lewis You're welcome. WENS UMM70 and subsequently the 700 series were the progressions. Don't let the different case, stickers, and button layout configurations fool ya. That's just part of the OEM game.

[@muhammadarif8158]

How much dc voltage want and how wattes battery required this 5000 WATS unit and how much price Pakistani rupees

[@davem5333]

Are you sure your problem is not on the other side? What kind of batteries and cables are you using? Most people underestimate the input power required.

[@knurlgnar24]

Yes, I am sure. I agree that most people blame the inverter when their battery setup and cabling are the real problem. That isn't the case here.

[@danielhorne6042]

i think it keeps cutting off is the input voltage dips to 11v ? too much current

[@MikeO-ss1cn]

Power Jack makes a 15KW/60KW 24V inverter. Can you do a review on that one?

[@ForViewingOnly]

Heh heh, I enjoyed the constant references to the 'Warning Lable' :-)

[@aToOoOoMboi]

Could anyone tell a Dodge Ram 350 Hi top camper van (V8 318 5.2L) running idle could continuously power its built in AC through this inverter?

[@ShortFlic]

Thanks for the very informative video without bias. Good job

[@spyder64]

Nice thorough testing. Love the dry humor. Were you able to return it and get your money back?

[@knurlgnar24]

I got what I paid for so I cannot really complain. It is still on my inverter shelf at as of today.

[@MrKenberk]

what does everyone suggest for a pure sine wave 1000-2000 watt 12V/110 power inverter? Been looking for three months and every time I find one I see bad reviews. I'm trying not to spend $1000

[@hildebertoalvarez6746]

io

[@spencoid1]

so far my Power Jack 3k (Chinese watts that is) low frequency 12 volt input machine is dong a good job but who knows how long it will last or when the Asian girls will show up.

[@immrnoidall]

how the hell can my 5000 watt powerjack LF PURE SINE inverter charger, have only a 25 amp fuse? i was told i need 00 gage cables , fur a 25 amp fuse. says 30,000 surge but fuse blows starting a 1400 watt AC.

[@goofykl9]

Any word on the LF version of this product

[@السفاحالصباحي]

ارغب بشرا جهاز 4000 وات او5000 وات وان يصلني للبحرين كيف الطريقه وكم يكلفني سعره

[@smallenginedude71]

not bad really for the cheap price. could add additional cooling on it somehow. would not be great for the Australian summer as it gets to 41 degrees Celsius here and thats nearly the meltdown point

[@knurlgnar24]

agreed. It's a terrible 5kw pure sine inverter overall, but considering the price point it may have some applications.

[@tomaszwojcikiewicz9379]

Do you understand the difference between power inverters HF or LF ??? From your movie it appears that you do not understand the difference at all.

[@FazluRaian]

Wow. How nice powerful apparatus it is!

[@esandquistSr]

There is a huge difference a Low Frequency inverter and a standard sine-wave inverter... I have a 6Kw Low frequency split wave that I use... It was NOT cheap. But the links you showed that were to low frequency inverters, which handle frequency sensitive loads much better... Like apples and oranges... Both are fruit, but completely different.

[@immrnoidall]

these issues must have been fixed because i see no bad reviews,within the last years or two.

[@evbobdemon6994]

Battery 11volts when load on under voltage cutout. I've been running my whole flat on a 3000w LF PSW SURGE 12000w power jack for the last 6 years and it will run everything in my flat only thing that cuts it out is the ev it don't like to charge the car

[@luistoribio6031]

en el negocio de la electrónica no se pierde,mientras pueda producir muchos millones.

[@luistoribio4788]

se puede hacer corto circuitos de base con 8,7.6.5.4,3,2,1(500uv)

[@njdj3760]

Hi sir Winder if you can hilp me , I have mobile car wash and I have ginretor and it is very noise I have that thought to use inverter but I don't know how to wire it is one buttrey is enough , I use vacum clener it is power 2.4kw max and steam machine it is 350 watt . So waht should I do if I go withe inverter ?!

[@DMAN22yeah]

+nj dj a samlex 3000 watt inverter, i would recommend 24 or 48 volts to make it a bit easier.

[@TheCumminsturbo2]

How many feet of extension do you have trying to start that stuff

[@knurlgnar24]

I don't remember, but probably 50 feet. The extension cords were not the limiting factor.

[@TheStevenhull]

Isn't the P3 Kill-a-Watt meter only rated for 1875VA?

[@knurlgnar24]

Steven Hull Yes, but it can handle a lot more for a short period of time and seems to be accurate when doing so. It is limited to 15A at 125V to comply to safety specs such as UL, etc.

[@KabindraShrestha]

I think not over in warning table/lable means the rated power of appliances won't be higher than that.

[@spencoid1]

that makes a lot of sense. good analysis.

[@TanvirKabir0461]

Thanks for your review and hard work!!