My Power Station works great in my W/D/W rig. It allows me to control the volume of the amp, feed the D cab, and then with the effects send feed the input of a stereo parallel mixer where I have my stereo effects.
@rontaylor973625 күн бұрын
Great explanations! One question I still have on the line out of the power station is whether it is ok to run the line out to effects pedals such as a Boss SDE 3000 EVH. It appears to be a line level signal which may not be appropriate for pedals? Thank you!
Жыл бұрын
A good and easy way to understand how to set-up the signal chain to create the wet -dry-wet sound!
@JoshKotlar2 ай бұрын
Looks like I’m circling back to this almost a year later haha… question: if connecting the Power Station to use as a Wet/Dry/Wet rig - there anyway to mute the dry cab, but still allow the line out to still be active? I want the ability to switch between W/D/W to only using the wet amps in stereo. If possible… I understand if I want to go from W/D/W to only Dry, I can put a stereo volume pedal in front of all my Wet pedals.
@andyracksthecams Жыл бұрын
Thank you. I use my PS2 as an attenuator and use the Line Output to feed timebased effects and the send from those go to a Rack Stereo Amp into two 1X12". The main amp powers a 2X12" centre Dry cab. I can switch the main amp. I had some earth loop issues but introduced an audio isolation transformer which helps. I am still working on this system as it is great but too many projects going at the same time (as always), it is work in progress.
@andyracksthecams9 ай бұрын
@@joshuasimonson7656 Line level into your return input device. I use a H90 at this point so similar. I have to add that you probably run into earth loop issues at this point. I got round that by using a car audio ground loop isolator and rewiring it for 1/4" jack plugs. Much less expensive than paying for an off the shelf Isolator.
@andyracksthecams9 ай бұрын
@@joshuasimonson7656 Sorry, didn't mean to confuse. Whatever device the line out from the Power Station connects to is your return. Line Level.
@athanasiusdicia1177 ай бұрын
Fryette power amps are arguably the best money can buy, and paramount for anyone who fancies the rack domain. Doing preproduction work for a guitarist using an LX II and this thing is gorgeous.
@chrisboller468 ай бұрын
In my setup, I have the FX send of the Powerstation going into one of those new Boss EVH sde3000 delays, and the dry center out from that going back to the Powerstation FX return, and then the left and right wet outputs of the delay going to the inputs of my wet amps (not attenuated).
@MaxGT2503 күн бұрын
I’m so confused. I want to run a wet dry wet. So do I need a power station for the dry, a 2/50/2 for the wet, a zmac for the Cabinets, and a Goodwood interfacer?
@FryetteAmps2 күн бұрын
Please join the new Fryette Support Forum. The community there will be happy to assist! support.fryette.com/
@theRodofwar Жыл бұрын
love all these vids !!!!!!!!!!!!!!!!!!!!!!!!!! Keep em' comin'
@steveyankees12 ай бұрын
Excellent explanations!!
@cjbillett Жыл бұрын
I never knew that’s what this is called. I have 2 Mesa 4x12s. I run a dry Diezel into the inner pair of speakers on the left cab, and a Mesa Dual Rectifier to the inner pair of speakers on the right cab. The Diezel effect send goes to a rack-mounted stereo effects unit, which pipes the effects back to a Mesa Simul-Class 2:90 stereo power amp. You “get it all” with only 2 cabs. As long as you don’t blow up your speakers, and let the power amp do some of the work of projecting the main tone. The Dual Rectifier is setup essentially be an “overdrive,” with the channel selector. You keep all the tight Diezel tone, but can add fizz and girth to flavour, without creating all kinds of side-effects in the stereo effects and power amp chain, ie the levels stay fairly consistent, but it grows hair. You always have the option to stomp a pedal as long as both amps are dialed in to receive an overdrive. It’s impossibly good. Anymore, in my new apartment, I can’t even use one half of a cab without getting a noise complaint inside 30 seconds of use, so I guess I need 4 Power Stations… Yes.
@JOOODYJOOODY Жыл бұрын
Why not create a marshall major type of amplifier with 811a tubes that can handle the high-voltage?
@theRodofwarАй бұрын
so is the LINE OUT on the PS-100, BALANCED or UNBALANCED ???????????
@FryetteAmpsАй бұрын
It has both.
@theRodofwarАй бұрын
@@FryetteAmps yes I know that the xls is balanced so I'm assuming that the 1/4 Line Out is UNBALANCED ?????
@FryetteAmpsАй бұрын
@@theRodofwar Yes, as described in the manual on our website.
@theRodofwarАй бұрын
@@FryetteAmps Thank You for Your Time
@ajmaxx1793 Жыл бұрын
These Fryette Power Stations are never in stock on the Fryette website. If it ever comes back to stock, is there an option to order 220V version?
@FryetteAmps Жыл бұрын
Please contact sales@fryette.com and include your location.
@deorai7710 ай бұрын
Hahahaha
@JoshKotlar Жыл бұрын
I really hope my Synergy 5050 doesn’t have a stereo separation problem… never really thought about it until watching this video. I would think a synergy 5050 would be a good candidate for two wet cabs?
@FryetteAmps Жыл бұрын
No worries .Steve designed that as well so you can be sure it's got good stereo separation.
@bruzzgravely347010 ай бұрын
@@FryetteAmpshow can I order one of these??
@FryetteAmps10 ай бұрын
@@bruzzgravely3470 Chuck Levin's has one in stock.