Full Build: Bringing A Left-For-Dead '79 Ford Bronco Back To Life

[@justinunger38]

I wish you can upload a full build video once a week

[@doctorprick2843]

sure they can , Its the magic of television and having 25 guys working for free behind the scenes

[@randomprojectsusa5196]

@@doctorprick2843you know these come out in parts, right? Some of them have a LOT of episodes for 1 build.

[@bkdv]

​@@doctorprick2843I think I have a few beers that I can get you to check out the garage door 2 I have to get the lower bolt in even though it is a little more than a half hour away from my house and I think I have a lot of stuff to do but I think I would like it to be in a bottle and you could send me the Zelle and I are going to be in a bottle and you can get a chance of the time I get home from work at 7 and then I can do that tn lmk if you need to do anything else else and if you need to go to bed early I can do it tomorrow night and then I will just got to see you in the middle of the day and then I would rather just wait until after I just got back to work at the end of my day and I don't want it to be in the middle of it and I don't want it to be a little late but I don't think I needed anything else but if I wanted it was a little late I think I wanted it to be in the middle row and I wanted to do something else else and not even to far away from my house and then it was a lot of things I wanted it to be okay and it seems like I am not able to wait to see it in the back of the way of the back end of my name and it doesn't matter I totally understand that I thought I wanted it to be a good time to get it done at the moment but I don't want it to the hotel room just to have a good day and then I will have a good day and then I'll be at the house for the weekend of May and June to go to this weekend and then we can make it happen for sure and maybe some of the time I get home and then I will have to wait until I get home and then I will be happy with the time to get back into the house for sure if I want to get it out of time for me to do it again I would love to see you guys and I are you going with it to be honest with me I would have loved it if I would have known it was a day I would rather do it again if you wanted me to go to the store on Saturday I do not want to do it again if you want me I can get you a ticket for me there are only a day or so and I don't have it I would have to wait for it to do it tomorrow I don't want to be back there I'm not I am so sorry for the other day and then you and your family I don't have any plans or anything else to do with me at the time I want to go back to the place and then I do you want me I and you and also venmo request something I just got home from work and now I'm just leaving work and then heading home now and I'll head over to you and I will be there in about an hour and a half hour and then I'll be there around 😅5 and I can garage school care rn sense fun here fun way tho like like fun tho fun tho like fun way way fun way way way like like like fun way fun fun together like fun way way way fun like fun fun way way way love tho together too like dope care way fun fun fun like perfect like perfect fun perfect fun kinda kinda nice fun way fun fun like fun way fun fun like fun like scary care fun fun way nice like like fun fun together fun way fun matter fun fun way wanna fun fun fun scary like scary fun fun like fun way fun fun care love together too wanna like fun together fun way perfect tho fun together fun way fun wanna fun together fun way perfect fun way fun perfect like way fun together fr together fun together fun together fun together way fun way nice fun way like way fun fun love fun care way fun fun together fun together fun together way way way fun fun way way fun nice like fun together fun together fun together scary together fun together haha relationship fun like fun like fun like haha hella dope fun way fun too fun way way fun like fun way fun scary like fun care fun wanna fall fun fun fun together fun tho love fun way fun together fun together dope krink fun fun together fun of you guys to do it tomorrow night in the morning w Soph and visit with yourself tomorrow and I'll be there after work today and tomorrow morning and I are going on a walk and then I will be there this week I think you are going to be a little late to get the lower end of my life lol and then I see you later on I love u so far and I are gona be happy to see you tonight for the first time on the first time I've ever seen you guys do it again if this is the last one I was going on the first time on the end end up going to bed at 1 am again if I can get to the next one I would have had to work on it tomorrow night in the morning and then I will be able to do that myself and I will not be able this am I just got done at the end of my day at work and then I have a good place to do that I love you and I are we getting together fun together often for you to check it yourself later on way I is we are we are we getting you Sunday night and I I love u too way I know parents I and we I kind not I am coming I won't have invited do you go live here and have fun with the kids and I would always be able to stay do you want me out of town and I can do that to you and your mom and I will have a little bit more love and I will have a great day and I love you too much to get the rest of the day and I will be happy to help you with your mood for me and you are you and I are going on a date with the girls place and then I will have to be a good person and I are gona and I am coming to get my 😮😮😅😮❤Welcome to Gboard clipboard, any text you copy will be saved here.😅

[@silentblacknessx8080]

I did a frame off in 94 on my dads 73 now I have a 79 and I’m rebuilding it as well love these trucks

[@WilliamCollins-sh6lm]

Unlike most channels Ya'All threw in the "Ball Park" , "Prices" !!! Most of the others figure if you have to ask you can't afford it !!! Which is usually way beyond the normal guy's Wallet !!! Thanks an keep on building !!!

[@ramonriveraroman4170]

I was really impressed with the build and more impressed that you could even find one of those in fairly good condition.

[@doctorprick2843]

$600 for a rolling chassie is a smoking deal . Somebody is doing favors on this show . I deal in 73=79 fords including this 4x4s and the orices are going past the moon these days.What I saw them drag home is $2500 with the junk 460 all day long. Only differance ;is here in Az you wouldn`t have to replace the floors. no big deal.

[@bduff007]

This is like 10-12 years old

[@MastaT_150]

Yup this is from 2009/2010…. Dang that makes me feel old.

[@ajconvert]

In the transition from the Jeep to the Hummer in the Army, there were a few Broncos in the system. I will tell you that as great as the Hummer was/is, they had to fight me to give up my Bronco. I loved that thing.

[@harrywalker968]

hummers are rubbish..just built wrong with a sht engine.. buik petrol/diesel conversion..gm should of used cummins or cat,,not buik.

[@Rockmobile1]

I DO love the old square body early 70's Broncos but my favorite Bronco by far is the 78' - 79" body style.

[@nobodysgarage]

The whole video is good, but the best part it right at the beginning when you explain HOW to find a deal.

[@lisamitchell1355]

What’s crazy is it drives and handles better than the new ones.

[@MastaT_150]

Ahhhh I miss the ol’ Sunday Power Block, that was the highlight of the weekend growing up. That and magazines was where a lot of my car knowledge came from…RIP to them. 🪦 😢 Thanks for posting all the old shows, especially these full build series compilations!

[@jamesmathers9294]

I miss my 78 and 79 Broncos

[@SegoMan]

X2 on that, I actually installed Dana 60's in mine before Currie even thought about it

[@rogeramorine4391]

I always told people that the clean engine runs better and I really believe that that's because it's true

[@lisamitchell1355]

My husband still has and drives his 77 4x4 short bed, with only 184000 original miles.

[@heavyearly2232]

I remember this one. A good one.

[@kevinmckinzie]

Wherever this Bronco is now, I hope it got a proper paint job. I can't even look at this.

[@doctorprick2843]

agreed, these guys are smoking crack. I`ve never seen such a hidious paint job. GAWD its ugly

[@muleenginejr]

😊😊P1p₩₩◇₩😊011😂10😂

[@muleenginejr]

1😊😊lM😊)]]😊😂😊😊

[@goldysgarage189]

damn, a few hours wire wheeling the frame and some black rust paint woulda been a nice touch.

[@FreddyFunderbunz]

Show us your tetz

[@jordandavenport496]

Thank you! Any plans to post the Super Dually full build?

[@justinunger38]

and the pro street machince s10

[@TundeEszlari]

Brilliant video.

[@brinkee7674]

Should of painted black and then apply Free Wheeling Stripes. Best looking paint job period. Spend the money and apply a Black Imron with 3 clear coats

[@kerongranger2229]

Like Admin read my comment about this full build last week 😌 Really gonna enjoy this one 👏

[@ndafarachaitezvi1139]

Awesome content as always

[@martiniv8924]

I loved the original Yella ! 😜

[@timothyplumley8316]

Hey guys, I don’t know if you read these or not. But I will ask the question anyway. Have you ever thought of using Line-X on your off road projects instead of paint?

[@lowrangeinnovascotia2930]

The only reason they didn’t lift it higher was because LMC doesn’t sell driveshafts😂😂😂😂 Go to a field, check By everything from LMC, check Brag how you are on a budget😂😂😂😂😂

[@joeschlotthauer840]

Dazzle Camouflage was used in WWII also.

[@doctorprick2843]

sucked then, sucks today

[@morton2200]

Which of the three rotors did you end up picking for the rear axle. Contemplating a similar upgrade on my 86 Cj7 (factory Dana 44 rear axle).

[@TheUsmc0802]

Oh old Trucks! Where did these guys go?

[@ivoman7]

beer&bronco's, bronco's&beer 😄

[@kbakeritsallaboutnobody.5761]

It's funny when I watch stuff like this and they say "rebuild" rather than replace like when Kevin was talking about the steering and suspension. Today's "mechanics" are nothing more than glorified parts changers. True mechanics can take something old and broken and rebuild and overhaul it to be useful again like the rear brake cylinders. Mechanics didn't replace them with new ones, they rebuilt them and continued using the original cylinders. 🤦🏻🤷🏻 LOL the steering and suspension on this bronco was REPLACED. Not rebuilt. Also there was nothing wrong with the original rims. They could've cleaned them up, painted them black, and installed 37's on them and had exactly the same as what they put on it but CHEAPER!

[@mikehagen2498]

You do realize most of the replacement parts offered come with a warranty. If I rebuild a wheel cylinder and it fails the repair is on me. If I replace it and it fails the replacement is on the supplier. Most technicians are liable for come backs. I will not rebuild a part of a replacement is readily available.

[@kbakeritsallaboutnobody.5761]

@@mikehagen2498 I realize all of the reasons why REPLACING parts can have an advantage over rebuilding them. Especially in a mechanic shop. This video is explained and described by Kevin to show us DIYer's "how to rebuild this bronco on a budget". Not how we need to order new parts with warranties to run a successful shop. My point is he should have said replace rather than rebuild because when it comes to the steering, suspension, and brakes they only REUSED or REPLACED but none of it was rebuilt.

[@michaelaldredge-greenwell1692]

So cool

[@62-62]

Great build on a great truck! The exhaust sound is terrible. Sounds like a good system would have been a better way to go.

[@steverives3060]

They also came with 400 cubic engines from the factory

[@innsanewayne]

Not replacing the u joints in the front driveshaft was a rookie move and one that for probably less than 20bucks should have been done!

[@innsanewayne]

Also body mount bolts looked like shit damn guys how much can they cost, holy shit! And yes I know this was a long time ago but people still watch these so don’t get it wrong!

[@joshslackslack8115]

Needs some rock sliders

[@noduh736]

Thanks to the federal government and the cash for clunkers program now there's maybe a few hundred left that was the absolute worst thing for cool older vehicles

[@Rustytales]

Hello In one of your videos a few years ago you talked about a rechrome company that was recommended as the best in the business. I've watched a lot of your videos trying to find this information and can't find the episode that talked about this company. Could you please recall the name of this company?

[@Buckeyebob]

advanced plating in tennessee. I believe this is the one.

[@brandond6724]

Wonder what happened to this beast?

[@viscountslappy5085]

Ahhh remember the days of spending thousands of dollars on a paint job for a rig you're going to thrash on the trail? 😂

[@bmstylee]

Could be worse. Nowadays people consider rusted out to be cool.

[@craigbowley6783]

Pretty cool but it needs lockers.

[@Bumblebee4788]

I would of kept the yellow, easy to match...

[@vickypratamaputravivo4940]

1979 Ford Bronce Second Generation 48:07 Das Bronco

[@rpscsx]

What happen to the bronco and can I buy it lol.

[@Helloverlord]

They forgot to drink brawdo through the show!

[@davidhimeback9087]

Sorry flairs doen't eliminate that rust it covers it an will be getting bigger..

[@Hirthirthirt]

why a visco-fan????

[@thomasmennis]

I gotta laugh at the idea of the 400 hp from a stock 460 with a towing cam, dual plane intake and stock heads. And why the hell would they reuse those body bolts.

[@doctorprick2843]

yea, they are smoking crack thinkn 400 ponies, 350 /375 MAYBE . The drag is getting the exhaust to flow, and the only headers you can get thats better than manifolds is L&L engineering. Last check their cheapies were over $650, but ....they are quaility. But ya gotta grind out the AIR hump in the exhaut port or your just draging your dick in the dirt. what are you talking about body bolts?

[@frankwolfe3181]

You get what you pay for.

[@augustoromero.8076]

🤩

[@rogeramorine4391]

I didn't care for the 351M I prefer to 351 Cleveland block much better torque what Moore Walla out of it and less

[@harrywalker968]

this is old vid,. anyhoo,,351m = 3.5 diffs.. with 47,s you need 4.88 diffs.

[@doctorprick2843]

Its a dog untill they gear swap it and at least put clutches in that smoked factory trac loc.

[@bduff007]

Nothing low Buck with a Bronco anymore

[@banmadabon]

What! Do I have to pay you 200$ for that "camo psychopath nightmare" paintjob!!! YOU gotta give me 2000$ to do this paint job on my truck....

[@nicholasfullerton5449]

46:00

[@GPowersPhotography]

2005 called.... No way this was shot in the last 2 decades.

[@Bird-nx5ef]

From my research this was released in 2007.

[@davidhimeback9087]

You did all that work an you didn't make it pull in all 4 wheels

[@doctorprick2843]

Its hollywood, what do ya expect

[@UpperDarbyDetailing]

Guys... please respect your viewer's time. We aren't watching these episodes 6 months, or even a week apart. We don't need to get caught up on the last episode. Cut that part out and save us five or ten minutes.

[@jacoba102]

I think there’s a fast forward button somewhere on this app 🤦🏼‍♂️

[@UpperDarbyDetailing]

@@jacoba102 of course there is, but we shouldn't have to use it with proper editing. These people are professionals for Christ's sake. Why are amateur KZbinrs better editors than trained professionals?

[@robertless5056]

🤣 do you even remember this being a TV show converted to you tube because they pulled it off tv, these episodes are probably older than you

[@UpperDarbyDetailing]

@@robertless5056 I'm 37 years old and I watched Stacey David when he was the original host on TRUCKS!. You know fuck all about who I am. In fact, I don't think that you can even explain why my age matters. Give it a shot Gomer.

[@ivoman7]

I doubt the paint-job was as cheap as proclaimed.

[@CeVillain]

BruHnKO

[@haleyaiden4295]

Can't u guys put real money in a ford or mercury plz

[@irombeach]

I can not understand the logic you have in the work. One of you fits the valves and then another grinds the head… where will the filing go? On newly fitted valve stems!

[@raginroadrunner]

Whoa...460? ..way way too much motor! Foolish.

[@doctorprick2843]

hey ragin....you got to be a millenial. everyone born in the last centery KNOWS that there is NO substitute for cubic inch displacement. Don`t tell me, youd put a LS in it, right? The best way to do with it is take teh 460 and bore and stroke it to make a 550 inche stump puller. Now your talking

[@raginroadrunner]

Ford beat the Ferrari V12 with a 3.5 V6. That old axiom is outdated. Ive built 460s for 40 years

[@doctorprick2843]

@@raginroadrunner I been doin 460s for only 50 years and have 5 running 460 trucks as I type. Let me tell you about V-6 turbo engine that use a computor to make them run , after a EMP hits us. Question is not If it will hit but when. Scrap metal is worthless after it hits, and thats what ECM controled fuel injected engines are then. Never had a Ferrari,never wanted one.Wont trad 200 of them for one of my trucks. You ought to get one, just in case.

[@frankwolfe3181]

Still a piece of junk

[@johngraves9201]

I don’t know why, but every older truck or car show was so dang cheesy it almost hurts to watch. Never any real work shown just a dude walking around with a terrible smile and a stale sense of humor.

[@doctorprick2843]

they ought to hire me to host the show. But being born in the 50`s and raised by a drunk ole man from the depression and getting the crap beat out of me daily for no reason, working for ford in the 70s and having my own shop for 43 years afterwards untill a truck fell on me in 2015( always use jackstands), I dont think corperate would go for my honesty nor my vocabulary. All the milleniums and beyound would run away crying for their mommy and all you older guys would love the show, and the builds. But the reality is the pilot would not even get half way though filming and corperate would be there with a restraing order for me . Welcome to America today. "You cant handle the truth!"

[@doctorprick2843]

Did they hirre Ray Charles to do their welding for them? They failed to mention where the timing cover , valve covers, exhaust mainifolds and all the bolts the 460 did not have when they drug it home. they were not in the expenditure list they gave. must have fell from the sky.

[@dano9421]

So you cut the wheel wells and you didn't do anything to make the cuts secure and safe from rust and debris thrown into the same wheel wells and rust it out faster than before you hacked the whole mess out and that was really bad for your big rebuild that is mostly replace everything, anybody can do that

[@doctorprick2843]

so I guess a machine shop did the 460 rebuilt for freee and gave ya all the engine internals for free too. Gee, I wonder what kind of 'favors " you had to pass out to pay for that. It kinda leaves a bad taste in my mouth. I also didnt see any tax paid on all that stuff. So how do ya get away with that. Still got that bad taste but the tax man is sure smiling.