Underbody Rust Repair on a '71 Chevy C10 - Truck Tech S3, E16

[@saublesurfer8197]

I'm working on a 57 Dodge Fargo to a 2001 Dakota frame. I'm seeing a lot of products I can work into my build. I like the aftermarket ideas on this show.

[@otisreading7559]

I loved that he used the selftapping screws such a handy tip

[@kitestance]

Otis Reading so true, it’s one of those things you could’ve spent half an hour trying to jig up a solution to press up and a simple screw is more than enough!!! This is why I watch KZbin vids.

[@erichildreth7562]

This truck is going to look good when it is done!! Really enjoy your show and thanks for all of the tips that you share with us! I always learn something new!!

[@c0wb0yTV]

these two are a great pair on this show! love these guys

[@thehandlesticks66]

God Bless this content

[@mrtank1967]

I love your videos you guys do awesome work I love to learn thank you boys.

[@mrtank1967]

STREET RACER I don't really give a shit when this was done I learn and I enjoyed it and I ain't no kid. LoL this kind of remark sounds like you might be the kid lol. Never to old to learn.

[@mrtank1967]

STREET RACER what is your obsession with ageI'm 52. When this was on I was working making money for my old Harley so get over the age bullshit and find a stupid remark to bitch about. Who's being the kid. LoL

[@deanwharepapa8561]

Awesome rust repairs

[@PaganWizard]

2:45 If I had a big replacement floor pan like that, I'd just replace everything that the new floor pan had to offer. There was quite a bit of that reddish orange stuff under that cab, maybe not all the way through, but once it's there, it doesn't like to go away on it's own. 4:45 The same goes with that cab support, ESPECIALLY with it being a relatively small part, as well as a structural support. WOW!!!!!! 6:30 The floor pan and cab supports were in much worse condition than the core support. You're replacing the entire core support, but putting band-aids on the floor of the cab.

[@oldz70]

with a shop and equipment like that, it makes it easy for anyone to do this work. it's not that easy while lying on your back.

[@AdriansFix]

No excuses

[@workingmansrestorations7071]

Good stuff... There is 100s of ways to do it. I do it one way that works for me and another guy will call it a hack job...

[@alphazulu3555]

It's hilarious how everyone on this channel has the exact same voice. I guess voice coaching is a requirement to work for this channel.

[@chaoszombie9995]

Mehteh Oreamnos the guys at Engine Power don’t have this issue

[@bluegrassman3040]

They talk like robots.

[@tomnekuda3818]

Maybe all from Southern U.S.? That shouldn't do it, tho....

[@alphazulu3555]

Yeah. I don't talk like that. And I'm about as southern as it gets. That is speech coaching.

[@tomnekuda3818]

@@alphazulu3555 I'm from the American west and everyone says I speak with a drawl.....go figure. I like you southern boys...if you need a hot motor, nobody builds 'em like you guys....guess is came from outrunning the revenue boys with a load of 'shine....that's a compliment.

[@Pgcmoore]

outstanding!!!

[@tomnekuda3818]

Hope they don't go the fake patina route......who in hell ever thought that was cool? Ya gotta be jackin' my root.....ruin a good paint job!

[@hawkdsl]

Yep.. the "patina" look was hideous before it was "cool'.. It was hideous while it was "cool", and is STILL hideous now. Glad that "fad" is finally over.

[@miken.4693]

I hate the whole patina fad. So stupid.

[@tomnekuda3818]

@@hawkdsl Amen, brother......guess I'm just a different generation. Grew up driving "patina" because I was too damn poor for a paint job. Guess I was cool and didn't even know it!

[@jenseninterceptors]

Agreed, kindof disappointed to hear that too. The rat rod concept is getting old but this might turn out really sharp

[@bmstylee]

@@miken.4693 which trend will age worse?. Rat rods or 16' long choppers with 330 rear tires?

[@barnescycle]

When is this gonna be updated ? I’ve been on the website and everywhere looking for the final vid or any progress??

[@QuickRainDrop]

I wish they could help me build my c10😂

[@colbygentry9210]

Same, I have a Chevy c20 that is mechanically sound but needs some help with body work.

[@baddonkey6876]

Lt: now i coulda made a store bought radiator hose work, but I'm trying to sell the shit outta this tubing and bead roller....

[@dudeparistx]

OMG...replace those radiator clamps with some new ones on that new radiator!!!

[@hermyherm365]

Love it !

[@IILILJON209II]

For sure I thought he was guna say COPS😂😂

[@markchirillo5083]

rust...thought you were gonna say....wife.

[@richardt6980]

should have epoxy primed the bottom of the cab before rubberizing it.

[@tomp3981]

LT looked like he was high. patina that truck. make it look like a farm truck. keep up the awesome work you guys do.

[@richardb4022]

For all this welding being done, does anyone think that Flux core would be good enough? Or is MIG welding needed? As I understand, my welder doesn't use gas, so is called wire feed Flux core.. the "gas" is in the wire. Since MIG stands for "metal inert gas" welding, and I don't technically have gas.

[@jamesanderton344]

These guys must be down south....in the northeast we wouldn’t call that truck rusty. I’m used to having nothing to weld to....

[@brappie8571]

👍👍👍👍

[@Ty-tie_FTW]

LT looks like his face should be on a grasshoppers body

[@WalterWhite-tw3zj]

Why can't you just weld a lap joint after plug welding the cab supports?

[@richardratley9873]

How does one contact y’all to rebuild my truck

[@toymaker-te8fq]

I was cringing watching you cut pipe on the band saw while wearing gloves. In the machinist trade, that is a major no no. The glove can get caught and drag your hand in! Love the C10, bad ass!

[@nyccollin]

Hands were a mile away from the blade either way though. If they were closer, I’d understand.

[@brianproffitt7263]

Patina look is stupid i don’t care what anyone thinks, if I’m already putting that kinda money in to the paint job it won’t be to make it look rusty, i would want it to look brand new

[@taylorh3930]

Your dam rights. I also hate black rims and that ugly murdered out look or them idiots that take white trucks and black out the grille bumpers and rims to make there truck look like it's bottom of the line.

[@brianproffitt7263]

Jesse James Curley yeah I like color match if the truck is black everything is black if it’s a white truck everything gone be white I just like color match an idk I like black rims

[@maxcuster3143]

I agree

[@jimmysapien9961]

They need too wear Dust Mask. !!! I would have used a lower cup Sprayer when applying the Rust inhibitor underneath Cab.

[@rustyjeep2469]

core support dude looks high AF 😂

[@robbiefrentz9427]

Im wondering how he knew i was sitting on the couch. Im closing the drapes

[@VegasRT500]

The firewall is more orange than red.

[@cbgreenbay]

Don't understand spending all that time and money and then just make it look old again . I will be glad when this derelict and patina fad is over . It's fine if it's legitimate and real and a real solid survivor . But faking it is like new Coke or a kit car on a VW chassis . There's nothing like the real thing . It's just a lame pretender .

[@c0wb0yTV]

it's just a style thing its whatever you're into i guess. I've seen some that come out awesome looking and some not so much

[@13christbane]

you think that rust barrier crap actually works. thats pretty funny.

[@bryan7821]

I would have NEVER ran the exhaust out the side,,,,EVER,,,,,,,AND,,,,,, paint the truck RED,,,,not patina........

[@connorbunch3577]

Someday I hope they can get the narrator to tone it down a little

[@marshdonald1134]

Why not show how yo make your own cab supports?? That's what I always do, with thicker metal so that it last longer than the vehicle ever will lol. Also I wanted to punch that guy when he said "rad" instead of radiator

[@mrlibowski493]

11:34 rather

[@rajrammbbs]

Why not use the entire section? Looks like a waste of money

[@bennetfox]

That four letter word that every car guy hates? Cancer.

[@nassirghulam4639]

Tomorrow

[@sawomirmessyasz1267]

czesc nowe a robota bez precyzji

[@What-ic6hp]

Can they speak without an inflection in their voice lol ?

[@Billybobaggins9]

STREET RACER 🤣😂🤣 no one fucking cares stop putting this on everyone’s comments 🤣😂🤣

[@chaoszombie9995]

Thrash It Till You Crash It someone is a little toxic

[@Billybobaggins9]

Matt oh si si

[@weekendtire4078]

absolutely and completely lost me at patina. Great build though.

[@nassirghulam4639]

Do a nother

[@jasonhunter6991]

Damn bro u look tired af 😴

[@ArturoSanchez-nu3mz]

En español latino porfa

[@mrlibowski493]

11:24 that hose isn't even on the rad

[@frankvitullo3735]

Mr Libowski yes it is. There’s a 45 bend on the radiator outlet

[@mrlibowski493]

@@frankvitullo3735 your truth and logic has no place here on the internet.

[@عبدالرحمن17-ص6ف]

Loool

[@nassirghulam4639]

Pls