Powerplant Control Panel Tour - Part 1 Authorized Personnel Only S4E1

Need a laugh? My books are even better than my videos! amzn.to/331JrxP
If you like what you see and want to help or get more involved, please consider helping support these videos.
ko-fi.com/captainboden
and if you made it this far, you're invited to the private Discord! :)
/ discord

[@asdasd-di6lx]

Black start rabbithole! Yes please

[@justjoe7313]

Seconded! :)

[@markhodgson2348]

I will join you lol 😆

[@tweak5255]

Yes

[@Whatsinanameanyway13]

Abso-lutely!

[@HamiltonMechanical]

MOST DEFINITELY!

[@40jwthomas]

This is incredible. I feel like I’m watching PBS kids, but I’m 30, and this is the greatest thing ever.

[@Physicsduck]

Thank you SO MUCH! :) I appreciate you! There's more episodes coming!

[@JCarey1988]

@@Physicsduck He stole my comment, I literally feel like an excited little kid watching Newton's Apple all over again. I'm an IT nerd but I wish so bad I could work with stuff like this.

[@atonduke7612]

Not gonna lie, there's just something sexy and exciting about old school meters, gauges, buttons, switches and knobs that no GUI on a computer screen can ever truly replicate.

[@Physicsduck]

This person gets it. :) We call it "Old School Cool".

[@fredinit]

I prefer analog to digital... With analog, after using the panel for a while, you can just glance at it to see if everything is were it's supposed to be at. That pointer should be pointing that way, this other one next to that line, etc. With digital, you have to mentally decode the values and some of them can trip you up in a scary way... It is supposed to be a 9 or a 6? Or 8 versus 0. There is a place for digital - when you have to know what the value is, not where the pointer should be. My iWatch has an analog face.

[@kindlin]

@@fredinit I was entirely confused by your post until you started comparing individual digits. Just because something is digital, does not mean it needs to show numerical digits. You can put a dial gauge on a screen just as easy as a value read-out. And then, if you ever need a more precise value for whatever reason, the digital information, in precise digital representation, will be displayed below/next to/inside of the dial. Or, at least, it should be this way. I recognize it's often not, but that's a design decision, not a limitation of digital information.

[@Idrinklight44]

I have to agree!!! Flew on old S-58 helos, to myself the cockpits are sexy

[@michaelknight4041]

​@@kindlinthere are places where each one has its advantages. For instance sometimes its still nice to have the needle movement of an analog meter like when troubleshooting an oscillator. Its much more intuitive to see a meter sweeping back and forth than a bunch of digits flashing. But like I said each one has its merits

[@polarvortex6496]

“Comprehensive and incomprehensible” Put that shit on a pillow.

[@ComfyWombat]

My old man (RIP) was a Navy Electrician in the Royal Australian Navy, and I have heard fun tales of ship generators being dropped 180Deg out of phase when hooking up to shore power. Shore power wins, and a generator spinning clockwise becomes a motor going ANTI clockwise... for about a microsecond, before the generator drive shaft snaps, the mounts rip and the generator is launched through three decks, and onto pier next to the ship.

[@Physicsduck]

That had to be one hell of a show.

[@steviebboy69]

Shit that is the stuff of nightmares, now I see why Chris talks about syncing to the National Grid properly. RIP to the old man by the way, just like the old boy a few doors away he was a live liney.

[@yuglesstube]

Interesting!

[@greywolf271]

I would wonder how accurate those tales are. RAN boats at least from the early '60s had load-shed protection in the power supply circuits. They would also have been the best engineered power units at the time. Synchroscopes have existed for decades and were present in the '60s. I have worked in power generation plant rooms with late '50s equipment and load shedding was present even then. You cannot physically connect an incoming source to a mismatched alternator.

[@CATech1138]

@@greywolf271sure ya can, never under estimate the power of human stupidity....i can't tell you the number of times i have been the better idiot....metaphorically , pull the wrong levers in the exactly wrong order at exactly the wrong time and boom lights and sirens....

[@vincentguttmann2231]

This is the content my ADHD brain desires. From the constant jumps back and forth, to the constant trivia, this is perfect. Also I'd absolutely love a deep dive on black starts!

[@Physicsduck]

Thank you! I'm thrilled you like the new editing style! It's a ton of work and I was worried that people would hate it. It seems everyone actually likes it. :) There's MORE COMING SOON! Thanks for being the most important part of all this! I appreciate you! :)

[@phillyphakename1255]

​@@Physicsduck New viewer here, I could use slightly longer time between jump cuts, maybe with a bit more natural transitions. The cuts feel abrupt and needless sometimes. That said, if you are just now experimenting with a new format, you'll settle into a good rhythm and figure out what works best for you. Keep it up!

[@Graham_Wideman]

@@phillyphakename1255 I concur.

[@humbleevidenceaccepter7712]

I would pay good money to have this guy give a 1 hour tour of a power plant.

[@Physicsduck]

Any support is sincerely appreciated (check the link in the description to my ko-fi to help me make more videos). I'll give you a full tour of LOTS of power plants, in great detail, one video at a time. I'm already working on exactly that. Check out my recent longform video on it to get started. :) Thank you!

[@aboreddev]

As a someone who builds industrial control panels and also does audiovisual work, I can confirm there is indeed something sexy about control panels.

[@Physicsduck]

Thank you! :) I'm going to do a video about exactly that very soon. :)

[@radimkolar2270]

Fun fact, we used your videos in class of electrical engineering all the way in the Czech Republic in Europe. Really good stuff!

[@Physicsduck]

WHAT! That's AWESOME! I'm sincerely honoured, thank you! And hi to all the cool kids in your class! :) Děkuji!

[@janisvaskevics93]

About the amperage - 3 phase power formula is P=√3*U*I*PF which in this case would make it P=√3*2440*46*1=194405W=194.405kW That is, if I see the meters in video right. Still, I took readings from different times in video, so it cannot be considered exact result.

[@Physicsduck]

Now THAT is an excellent comment :) Thank you! There's a shot in there that shows the entire panel all at once so that all the readings match up in relation to time. That way people can check their math and be sure they got it right. :)

[@janisvaskevics93]

Also, there is a phase voltage vs line voltage argument and so on.

[@eh42]

@@Physicsduck which now causes this armchair idiot to ask: Would there be benefit to taking Vegas Mode to level 3: A, V, kWh for each phase? (how critical is it that the 3 phases be somewhat balanced?)

[@AugustusTitus]

Another fun one is delta-wye connections and wye-delta motor starters. It's amazing they figured that out and it can all be done with contactors!

[@janisvaskevics93]

@@Physicsduck thank you! Good thing that electricity works the same in America and Latvia. Just some parameters change.

[@BKD70]

I read your entire disclaimer, and I think you forgot one: Your call will be ignored in the order it was received. Subbed.

[@Storyideas81]

I would love to see more about a black start condition. There is a black start power plant about a mile and a half from my house.

[@stillthakoolest]

Black start video please! These kinds of explanations are rare on KZbin. Keep it up, looking forward to part 2!

[@Physicsduck]

Thank you! :) It's coming soon!

[@DJSubAir]

​@@PhysicsduckThank You!

[@fixmehanicar]

Hell yeah ive been waiting for this. Good to see you back.

[@Physicsduck]

Hey! So YOU'RE my subscriber! Thanks for watching! It's good to be back!

[@coreybabcock2023]

​@@Physicsduck You was gone for a hot minute

[@SeanBZA]

@@Physicsduck Hey, there are at least 2 of us.......

[@Physicsduck]

I assure you, the past two years were the longest decade of my life. It's good to be back and I'm so very thrilled that you're here! :) Thank you!

[@coreybabcock2023]

@@Physicsduck sometimes it's good to take time off though to recoup

[@FuncleChuck]

Hearing you scream about kilowatt-hours is fantastic. What an absolutely cursed unit. Our new electric car rates its efficiency in MPGe, or "Miles per gallon equivalent", with is based on miles per kilowatt-hour... and my brain nearly malfunctions any time I try to determine what that actually means.

[@theWONDERFULwiz]

Honest question - why is it bad? I'm no EE or anything but I have actually always been irritated by some of the other alternatives like Amp-hours for battery packs. In that context I think watt-hours is much more useful than amp-hours, right? What am I missing?

[@bragesb]

I don't really get it either, but it may have to do with the fact that the Watt is defined as 1 Joule per second? So 1kWh is just one thousand Joules per second times 3600 seconds, and the units cancel out and leave you with 3.6 million Joules. Which is all fine and good, but the Joule is a very small unit for measuring the energy consumption of an average household, whereas a kWh is about the energy an average household uses in an hour according to this video, so it makes sense to me that that would be the more popular unit here

[@deelowe3]

​@@theWONDERFULwizbecause we already have a unit to measure power over time. It's called the joule.

[@drheaddamage]

No, there's one worse: the kWh/year unit. used to indicate power consumption over an average year. Now you're mixing three time magnitudes!!!

[@CKidder80]

I too hate the kWh unit. It's truly cursed. My biggest beef with it is using it in reference to electric cars and charging. You see, your car might have a 70kWh battery in it. Your charger might be 10kW. So, How fast does it charge? 10kWh per.... hour... um... So it returns 10kWh of battery capacity per hour. Yeah... having "hour" as part of your actual unit is terrible. I think joules would be the better unit, as others have said. Or, maybe megajoules for battery packs. Alas, we are standardized with kWh for both batteries and the grid. I hate it.

[@Daerux2]

From a "knowledge per unit of time" perspective, that was the best damn description of power factor I have ever heard. I don't watch KZbin shorts because of reasons, but I think that part would make a very educational short.

[@Physicsduck]

Thank you! I really appreciate that! I tried to make it a short, but couldn't fit enough of it into the 1-minute timeframe for it to still make sense like I wanted it to. There's just too much setup required. I could do it with animation, but I'm not that good an animator. Perhaps I'll take another crack at this when my skills have improved a bit. Thank you for GETTING it though! I appreciate you! :)

[@John_L]

Agreed. Another rabbit hole would be to discuss exactly why capacitance and inductance affect PF but in opposite directions.

[@ThePoxun]

In the UK is becuase our grid completely covers the country in a single synchronous AC system and the frequency is constantly monitored and recorded you can, with a bit of analysis, use the variations in background mains hum on an audio recording of sufficient length to timestamp that recording to the second.

[@SeanBZA]

Only problem with that is that this is almost completely obliterated by the variation in timing of the recorder itself, from things like battery voltage drift affecting the crystal oscillator that provides a sample clock, to temperaure drift as well that make it vary. You get more of a graph of oscillator drift with time, and with analogue tape, with wow and flutter, it is even worse. Digital the hum is hard to recover, mostly because most recorders will absolutely actively remove 50/60/100/120Hz noise with narrowband filters in the DSP engine that does the pre encoding processing, simply to reduce data use recording hum, and then your typical Frauenhof encvoding to MP3, FLAC or even AAC, will strip out all the bass noise to a great extent, unless not masked by other sound energy, so the recording will have very little data to begin with. Even if you were recording using WAV or other lossless CODEC, the data stream would have very little hum imposed on it, and if recorded off a phone line, with all the equipment along the way adding in hum, and the SPEEX codec doing serious decimation to get all this data into a single 8kbs data packet system, you will be hard pressed to get anything. You can do it in theory, but need both a good recording, no digital to analogue conversions until the final ADC to record, a log recording using a very well disciplined ADC clock, preferably a Rubidium disciplined one, though an ovenised crystal that has been running for 1000 hours continuously is a close second, and really good dynamic range to be able to use DSP to do the narrow band filtering needed to remove all the rest. Yes there is a paper, but it is idealised, and real life is hard to actually implement.

[@stongeification]

Thats just like... Marco Reps levels of zeros right there

[@ThePoxun]

I didn't say it was easy 😀 I did kind of gloss over that with "a bit of analysis" which should have been a "complex piece of analysis requiring looking for a best fit taking into account variances in the recording fidelity". It doesn't always work and yes modern digital recording filters can make it harder but still often record harmonics that are usable with the right analysis. Tom Scott did a video a few years ago.

[@steviebboy69]

@@ThePoxun Yes I remember seeing a video from somewhere on this exact subject and it was to do with law enforcement from memory and Tom Scott rings a bell.

[@felixyasnopolski8571]

@@SeanBZA There's not such a big of the problem. What you need to measure from recording is the frequency fluctuations, and since they are relative - you can find the correlation between your fluctuations and grid fluctuations.

[@Ghauster]

Disciples of the Plastic God rejoice. Chris is back to bring us new content!

[@Physicsduck]

lol, thank you! LOTS more coming!

[@jfbeam]

Not entirely new, but we'll take it.

[@HBvD]

The disclaimer is a must read 😂😂😂

[@csmcca]

The disclaimer needs its own thumbs up button!

[@jasonbender2459]

Came here to say this. disclaimer is epic!

[@n1gak]

200 kW / 2400 volt / sqrt(3) (because the ammeter is measuring one leg); = "just over 48A" which is what the meter shows. There would be a further error (which will be difficult to read given the scale of the instruments) where POWER could be different than kV * A because of non-unity power-factor.

[@jfbeam]

Plus, the phases are never balanced. (the enduring problem of every power company. I pay attention to it in the data center, but there's not much I can do about it.)

[@BrightBlueJim]

In another life I was a radar technician at a remote station on the Alaskan Peninsula that was of course not on any grid. It was powered by five 300kW White-Worthington vapor-phase cooled diesels, which were also the heating plant for the site. I made friends with the power plant operators so I could watch from within the control room when they did fun things. Usually it took only two of the generators to power everything, but under some conditions they had three on line. This brings back memories.

[@salsapicante8931]

0:14 This editing is like hardcore drugs to me. Just ran into this goldmine of a channel and you’ve got me at the edge of my seat waiting for the “we’ll cover this topic in a future video” videos.

[@Physicsduck]

Excellent! I'm glad you're here! :) You might want to check out the Discord too, link in the description! :)

[@MyAvitech]

Welcome back, Chris! Glad to see you're back to posting vids again.

[@Physicsduck]

AVITECH! YOU'RE HERE! OMG! THANK YOU! It's so very good to be back, and I'm glad you stuck around! :) Thank you!

[@JMSobie]

Two panels that will keep you staring for hours are the old slate-backed panel in the Worthington generator shed at the Buckley Old Engine Show (now disconnected but AIP for your staring edification) and the DC knife switch panels for the old steam DC plant in the basement of the New Yorker hotel. Which I saw a video of ONCE and never found again. Skinner Una-Flow engines. Pretty sexy.

[@Physicsduck]

There's a couple of the old slate panels still in use out here in the wild. I'm trying very hard to be able to get some video of them, but the security guys have a problem with that. They DO exist though, and they're STILL IN SERVICE!

[@bennetfox]

More videos please! It is fascinating to see how an actual power plant works!!

[@Physicsduck]

Thank you! I'm glad you're enjoying them! More are coming as fast as I can make them, it takes a lot of time, energy, and money to make videos at this level. :) But I'm on it!

[@aaronatstate]

V x A = W is only for DC circuits. AC changes things

[@jeffl4810]

Still stands. It's just the simplified version of V * A * cos (theta) = P For DC, the trig function simplifies to 1, reducing to V*A=P Edit: Note: Power Factor, or PF is just the calculated term of cos(theta). As DC can/is considered, in engineering terms, AC with an infinite cycle period (0 hertz). So it can be considered the voltage waveform is perfectly in phase with the current waveform. Therefore, the current voltage phase relationship has a 0 deg phase shift. Cos 0 = 1, and why the equation simplifies to V × A = P for DC.

[@jfbeam]

Exactly. It's AC. And AC is "voodoo". (there are three phases, and differences in voltage vs. current vs. phase - thus "power factor")

[@Graham_Wideman]

@@jeffl4810 I think the formula you want is Active Power [W] = V * A * PF where PF is cos(phi), phi is the lead or lag angle between voltage and current. Taking the cos function of PF doesn't make sense as PF is not an angle, it's a ratio.

[@jeffl4810]

@Graham_Wideman the angle is the phase relationship of the voltage (hopefully) sine wave, vs the current sine wave. A lot of ratings simplify the phase relationship by denoting it PF, which is just a factor to multiply by, of the results from the original COS(theta) term If the current is ahead of the voltage waveform, it's called leading, (cos-90 for purely capacitive) and caused by capacitive loads. Lagging is behind, and is caused by inductive loading (cos90 for purely inductive). Purely resistive is perfectly "in phase", and has a cos0=1 relationship. In reality, the theta will be between -90 and 90. The further away from 0 it is, the more "appernt" or "imaginary" power is flowing vs "Real" power. There are many other things, like mechanical loading being one, that affects power factor. Pretty much every electrical device other than old skool light bulbs and resistive heating elements (and even those often have phase controlled output mucking with power factor) has an imperfect power factor. Many loads are now required to have power factor correction circuitry in their power supplies to make the load appear as if it's resistive!

[@jeffl4810]

@jfbeam Haha. No magic involved. But it can get weird. Complex numbers (ie sqrt (-1) ) have a practical use when calculating this stuff. It's actually kinda interesting

[@ghost9955]

Yes. Please. yes. A black start video would be wonderful. I keep coming across the topic, and can't get enough.

[@solomonable1679]

Love this channel. The guy has the perfect personality for the stuff. I'm a master electrician on the other side of the power grid servicing the buyer side of power distribution. Listening to these videos I get valued insight on issues that most people in my fields don't know. This makes my services more valuable. 👍🏻👍🏻👍🏻

[@seamusjohnson2621]

This video was very interesting Chris! I can tell that you worked very hard on this. Really good job, the editing and video was very well done too!

[@Physicsduck]

Thank you so very much! This one was HARD to make, and I'm glad you appreciate all the effort behind the scenes.

[@seamusjohnson2621]

@@Physicsduck Of course! I find things like this very interesting. Even though I don't know a ton about power, it's still very interesting to learn some stuff!

[@rleeAZ]

Hey Chris, welcome back. Looking forward to your vids on power factor and the stupidity of using kilowatt hours in measuring power plant output.... :)

[@Physicsduck]

Thank you! :) They're coming! Scripts are already in progress on both :)

[@scratchpad7954]

I looked up Vegas mode and I started purring at the thumbnails. I didn't even need to click on a single video.

[@shawnbuckendahl1968]

VARs are a fantastic thing. Former submarine electrician/electrical operator turned hydro plant electrical engineer turned power system apprentice trainer. Sometimes my ADD fights with my OCD.

[@Currawong]

As one of those audiophiles you mentioned, owning gear with a large amount of capacitance, I appreciate this. A fun thing now is that I own an amplifier with an old-school choke power supply.

[@JMSobie]

Used to work for a major audio lab. Our speaker test racks had massive 1:1 inrush transformers just to handle to jarring voltage drop that a dozen subwoofers barking off pink noise at high dB's would pull. Even comcert hall PA's drop into protection mode without them.

[@AugustusTitus]

Delta-wye connections (GET-3388B) and wye-delta motor starters. It's amazing they figured that out and it can all be done with contactors!

[@Physicsduck]

Oh THANK YOU! There's my bedtime reading tonight.

[@alitheretrokid]

Chris, I don't know if you remember me but way back in 2019 I believe when you were liquidating the geek group, I went with my dad to check it out. I was only 14 at the time and found an apple II that you let me keep for free with all the applesoft books on the condition that I would actually use it. We also had a conversation about the copper wire recorder I found that they would use in WW2. I spent a couple weeks learning basic applesoft with the books you gave me and make a couple simple programs. Since then I have learned to code in java and HTML, and I am studying mechanical engineering at GVSU. I wish I knew about the geek group before it dissolved and I am glad to see you are doing good.

[@joshjones3408]

If you put power in the shower....to get it clean....now hang on ..i was all ways told i couldn't cook toast in bathtub 😆😆👍👍👌👌 great video 👍👍

[@Zero-X6773]

What an awesome rabbit hole I’ve discovered.

[@Physicsduck]

Thank you! There's over a THOUSAND videos on this channel, and plenty for you to explore. :)

[@pennyjim5671]

Pretty good timing. I rediscovered your videos like a day or two ago and subscribed because I didn't know why I wasn't. It might've been your shorts that reminded me about watching a couple of knowledgeable dudes dicking around with repairing a generator, but all I know is I Immediately went and re-watched the last few episodes of S3

[@aqualek1945]

In South Africa, thousands of people are actively working to keep our lights off through loadshedding

[@electricandlspower]

I seen most of the shorts I'm happy to see them together. Thanks

[@-ScottyT-]

Wow! I've just found your channel, and you've got a fan! Your descriptions are easy (enough) to understand, and the humor makes it that much more enjoyable!

[@MrRoan00]

Yesss welcome back!! Nice to see full videos again 😍 +1 for black start rabbithole ;)

[@lecookie4396]

OH GOD YES !!! FINNALY AFTER 2 YEARS !! I've been waitin for agess so happy right now woot woooooot !! I hope we'll get more of your amazing content

[@Physicsduck]

Thank you! The past two years were the longest decade of my life. Now we're back in action and there's LOTS of new content headed your way. :)

[@phantomproductions3535]

Great to have you back Captain! Love the content!

[@explorerone3752]

great to see new episodes chris!

[@Physicsduck]

Thank you! :) How do you like the new style?

[@lukelane124]

Can’t speak for Steve but I like the new ones and the old ones almost equally. I think the new ones come off as more polished. Also Blackstart plz! I noticed in one of your earlier videos a series of 12V batteries and while not ideal could be used to blackstart site 2. Has your site ever practiced a blackstart??

[@generaleric567]

niceeeee, i was sad when i found your channel a year ago or so going through you r entire catalog of videos and sad it ended, glad to see your back! you get a sub from me!

[@Physicsduck]

THANK YOU FOR THE SUB! :) It was a rough ride, but now that I've been to the bottom I can teach people which way is up. :)

[@generaleric567]

@@Physicsduckim happy to tag along for the ride!

[@stevepaynter3419]

Much appreciated. Being a retired civil engineer, I find your program fun and entertaining. Yes, I'm also a nerd at heart. Cheers!😅

[@Blazer556]

This is my first comment on a KZbin video. Love the channel! I’m in the software engineering space now but at one point I was a maintenance electrician and had a little exposure to power generation. This answer may have already been proposed so forgive me if I’m duplicating it. I think the meter readings can be explained by real and reactive power. A large chunk of the loads on the grid are inductors and when your AC load is “too inductive” or “too capacitive” reactance starts to come in to play. The meters show real power. But the generator has to work hard enough for real + reactive power. I think utilities have large capacitor banks to account for this. A quick google shows the math for this. If you assume 60Hz AC the math is really simple but if you drop that assumption, time to bust out the calculus.

[@hartsfire5706]

this is all so over the top of my head and yet i find it supper interesting. welcome back Sir.

[@fireplaceninja]

what an excellent find your channel is! well done explaining such a cool, niche thing most people won’t get the chance to see otherwise. Kudos to you for welcoming someone teaching you about something! Helps everyone interested

[@nixxonnor]

It is good having Chris back to entertain our curiosity :D

[@sethgt1234]

I enjoy watching and learning from your videos! Keep up the amazing work. 👍

[@Physicsduck]

Thank you! I'm glad you're getting something out of this! :) Stay curious! and thank you for being here! You're the most important part of all of this!

[@vtforester1382]

Thanks Chris! Working on my second class power production worker rating as we speak, lots of Manuel starts, and more advanced learning about our units and plants. We have 6 hydros in 2 sites. 4x 2mw horizontal Francis runners from 100 years ago, 1x min flow unit which produces around 500kw and has a double runner incase of low flow we can drop it in half. Our other plant produces about 4mw and is a vertical Francis. We operate and maintain 4x 2mw catapiller diesel generators and a GE frame 5 gas turbine. Love what I do, and enjoy all your videos. Keep after it 💪

[@Physicsduck]

That's AWESOME! Thank you for being here! I love that you're getting into the industry and learning the trade! You're one of the COOL kids now! :) Thank you for being a part of this, and you're personally invited to the Discord! Check the link in the description for a place to come hang out with a ton of other people as weird as we are. :)

[@EricMBlog]

So happy you are back! I love your videos, lots of good information.

[@Physicsduck]

Thank you! :) I'm glad you're enjoying the new videos! MORE COMING SOON! :)

[@EzeeLinux]

Too muc fun! I am looking forward to part 2. :)

[@Spike-sk7ql]

Dude, I'm a freaking auto mechanic, and for some reason I find myself fascinated by this stuff.

[@muninmatt]

Saw a clip from this video on tiktok, glad I found the youtube channel! I love the format. Subscribed, look forward to binging later.

[@Physicsduck]

THANK YOU FOR BEING HERE! If you see my video on TikTok please let me know where. I don't HAVE a TikTok (at least, yet....perhaps I should?). So that means someone stole my video.

[@tomhekker]

Love your vids Chris, really informative and your style of presentation is great. Keep up the good work.

[@Physicsduck]

Thank you! That means a lot, it's good to know that people are enjoying the new style. :) Thank you for being the most important part of all this! :)

[@krz8888888]

Hey I was thinking about your channel a few days ago, nice to see you upload!

[@Physicsduck]

Check the Shorts section on here. I've been slowly ramping up making videos for a few weeks. and THANK YOU FOR STILL BEING HERE! :) I appreciate you, and your patience :)

[@robert-wr9xt]

Respect to the dude. I learn something every video I watch. Short and sweet.

[@DataMatrix47]

Great to see you back, interesting new format (cut-shot from the lab) since the last authorized personal video a year or so ago (thumbs up).

[@Physicsduck]

Thank you! :) I'm glad you like the new style! The last episode of APO was actually two years ago. A year ago I was still in hell.

[@kiatsumi7355]

11:53 "Or some idiot trying to fix something that they don't really understand... sometimes that's me-" This, is very relatable.

[@DrakeLuce]

Really detailed, exactly what I want to hear about, love it. Digging this format and I'm locked in for your next videos Chris

[@Physicsduck]

That's awesome! Thank you! :) I was worried about making such a radical change in format and I'm really glad you're enjoying them! :)

[@dieseldork6]

Awesome video! Thank you for sharing!

[@SampledOcean]

Just found this channel through shorts. Already a big fan!

[@Physicsduck]

Thank you! :) I'm glad you're enjoying it! :)

[@Mjsmith1029]

welcome back Cap. Missed you. Glade to see you back.

[@stevenormandin2059]

WOW it is SO well simply explained. Can't be better :)

[@AmazinglyAdamToo]

Looking forward to the next videos. Especially the deep dive stuff!

[@parker02311]

I've been seeing the shorts and been waiting for a long form. Welcome back!

[@Physicsduck]

Thank you! :) I'm glad you caught the shorts! It seems that they're two different audiences, but I'm glad you made the crossover :)

[@parker02311]

@@PhysicsduckAnd also thank you for vegas mode, the more control panels the better.

[@JanuszS-zm5om]

Hey, good to hear You are back! Cheers!

[@user-yk1rc6ty2q]

Love this stuff Chris. You are extremely smart and very entertaining

[@flush_me]

Great to have you back. I've always enjoyed your video for the technical, educational and hilarity values.

[@Physicsduck]

Thank you! I'm glad that you appreciate all of the facets of these. :) You rock!

[@benedekhalda-kiss9737]

Absolutely love these videos. Shorts are awesome too.

[@titus142]

I greatly look forward to all the future deep dives!

[@Physicsduck]

Thank you! I'm so thrilled that people are enjoying the new style of videos. It's a massive amount of work, but it seems worth it. Thank you for being here! :)

[@MCDainter]

after finishing my chem bcs i plan on looking at working at a powerstation so this is a cool af insight. thank you for producing this video, I look forward to the other videos.

[@kleiner851]

I loved your previous videos, can't wait for more!

[@truckinman86]

Glad to see you back. I can’t wait for Pt.2 and I’m on board for a black start video.

[@Physicsduck]

It's coming! and THANK YOU! :)

[@aidanfreeman2932]

Not sure how i found this channel but i just binged the series about Em. So glad to see i found it intime for the start of something new. Oh and yes please on as many deep crasy mindblowing dives as youve got breath for.

[@Physicsduck]

Thank you for being here! :) I'm glad you're enjoying the series! LOTS more deep dives coming! :)

[@lowesystems]

Always great Chris, thanks so much, love your videos

[@Physicsduck]

Thank you SO VERY MUCH for being here and enjoying them! I appreciate you! :)

[@binarydinosaurs]

Chris is back! This is a very good thing. Thanks to you I know what a wicket gate is and what it does.

[@Physicsduck]

I'm BACK! And even better, you're still here! HOW COOL IS THAT! :) Thank you!

[@markscheutzow3446]

Really enjoyed the tour, looking forward to seeing the control tour, and the black start. Be careful out there.👍

[@Physicsduck]

Thank you! There's more coming soon! :)

[@felipel.r.637]

This is absolutely amazing. The content, the editing, and even the ironies, pure gold! Greetings from México

[@Physicsduck]

Gracias Felipe! I'm so glad you're here and enjoying these! Thank you! :)

[@michaelwynne2801]

You’ve come back smashing it brother! All the best for the future. Aussie Mike

[@Physicsduck]

Thank you mate! And thank you for sticking around all the time! :) I'm so glad you're HERE!

[@mrmerkin6203]

Excellent! Thanks! Black start .... yes. I once had the opportunity to tour a hydro power plant under construction on the Tekeze River. I was on a self-guided whitewater rafting trip and the tour almost started by damn near floating over the top of the dam that was under construction .... definitely got the heart beat up.

[@slghtmedia]

great editing in this, so straightforward but the cuts are engaging

[@nickolaspina2970]

I’m so glad to have found this channel

[@djrock9000]

Missed you Chris. Glad you are back man.

[@Darwinsfinch78]

Great vids, love your presentation

[@thompsonschwabbel6622]

i don't know why i never saw any of your videos or why you have only 100k subs but we gonna change that (: Educational and fun to watch.

[@mazzg1966]

Love it!! Thanks for the great breakdown of the panel and all the mysterious gauges...Looking forward to part two and of course we are going to bite on your teaser about the black start...Inquiring minds want to know!

[@patrickoleary6379]

Cant wait for the next episode! Love the old school cool stuff! Got all antique style H.A.M. equip myself. Like the new style as well! Came out awesome.

[@fersoler]

Great to have you back!

[@Physicsduck]

Thank you! It's good to BE back!

[@316neil]

Ooh - you’re back! I think I subbed whilst you were gone. Welcome back, can’t wait to watch your new vids!

[@Physicsduck]

Thank you! It's a pleasure to meet you and I'm glad you're enjoying the videos! :)

[@TheKdcool]

Really like this new video style!!

[@Pistoletjes]

Oh yes, I loved the former episodes of this series, and the sounds it makes when you tie the generator to the grid. Welcome back, Captain Boden!

[@Physicsduck]

Thank you! :) It's AWESOME to be back! I'm so truly thankful that you're still here! :)

[@fuelcontainingmass]

That disclaimer was absolutely unhinged! I feel like I read the Unabomber's manifesto 😅 Bravo Chris! Thank you for your insightful video and keep up the great work!

[@smithno41]

I'm glad to see this series back! And yes, in the broadcast industry there is a lot of "abandon in place". Old frequency meters that were no longer required to be operational by the FCC is one example. The most interesting was a Khan AM stereo generator that was AIPed when the FCC gave up on "let the marketplace decide" and said "Thou shalt use C-QUAM". And another vote for a video on black start

[@FaSMaN]

Its good to see you back :)

[@1964bc]

Hey, your alive.😄Nice to see you producing contain again. 👍👍👍

[@jonvanderhilst3259]

Super fascinating - thank you

[@Physicsduck]

Thank you for watching! :) I appreciate you!