MyFit skate liners overview & Crown liner heat molding tutorial

Enjoy Sam Crofts walking you through our MyFit skate liner collection and demonstrate the heat moldability of the MyFit Crown liner in an in-depth tutorial video - www.powerslide...
908300, 908172, 908173, 908301, 908174, 908222, 908354
MYFIT made a name for itself being the leading aftermarket liner brand in the world. More and more people switch to MYFIT, due to fitting, quality and look. The fan crowd is growing and so is the brand. While we focused on less liners and only made them in dual sizes, it became a lot easier to actually find your right liner in the perfect size. Perfect fit by heat molding or by the infamous memory Recall fit made them stand out from the rest.
***
Subscribe for more inline skating videos:
kzbin.info...
***
www.powerslide...
#powerslide #myfit #skateliners

[@YocelinRoLLer]

Excellent video I'm just about to use my powerslide next charcoal and I want to thermomold them thank you very much

[@frankyaction]

Any idea when will the crown liner be back on stocks? It has been out of stock from all the shops.

[@Mirtilla000]

I’m a EU 39 (25-25,5 cm). What size whould I get? I’m buying them cause my skates feel to wide for me…

[@KevinBrown-ih4yb]

Is there anywhere a chart that shows what liners are compatible with what boots?

[@BlackyRay_Patrick]

Any liner is compatible to any of the boots with separate liner of powerslide brands

[@Bandoounlimited]

Was I the only person to laugh at the liner being shrinked into a cell phone holder 🤣

[@draugas2000]

hi thanks, can you add info on the hight profiles of the liners? So for a liner of the same size i.e. UK 11, are they all the same hight?

[@draugas2000]

@powerslide

[@draugas2000]

at the end of the vid it looks as if spc is lower.

[@PowerslideInlineskates]

hello! all heights of each liner are listed at each product page for sample size 41. in between sizes of each liner, the height only chnages a few mm (up for bigger sizes, down for smaller).

[@draugas2000]

Powerslide Inline skates // all 20cm then. Thx!!

[@chinobean3555]

@@PowerslideInlineskates this^ is the trype of shit that makes me f*** with pwerslide,usd and my fit. they respond to your woes and put out one hell of a product!!!! im rockin some sway 58s with myfitSPCdual fit liners and i literally could not ask for a better skate

[@KirkRedgate]

I NEED SOME ADVICE. I bought the USD Aeon Sam Croft 2 with the Myfit 2nd skin. I'm 9.5 UK shoe, so I got the 9-9.5 UK skate after watching reviews and reading comments but my big toes are slightly too tight. I removed the innersole which helps but will they stretch out? I don't want to buy more liners for £80, plus they're not easy to get hold off in the UK. I already had multiple issues getting the skates delivered from Germany etc.

[@PowerslideInlineskates]

Hello, removing the innersole is one good option. They should not stretch out i think. Delivery of good is quite complex since covid is here. Hopefully things will get better oon. Thanks for the comment.

[@leonardticsay8046]

Any white or blue liners coming out soon? I’ve been looking to upgrade the liners in my USD sways and I don’t have any options that will go with my color scheme.

[@markushouve4730]

Which liner bought u for the Sways? Any recommendations?

[@JFarlette]

Seems like you should do one skate at a time to me!

[@kalelinslo235]

My Aeons feel tight with the Skinny Boy liners. Do you suggest that I try 2nd Skins in the same size...or stick with the Skinny Boys but one size up?

[@PowerslideInlineskates]

We would suggest that you try the 2nd Skin Liner!

[@timjr.jucotan9813]

hi. @powerslide , can you recommend something for usd classic throne?

[@PowerslideInlineskates]

We would suggest using a second skin liner, the thick upper padding and well pronounced achilles padding is very comfy, whilst also keeping your heels well secured in a classic throne. It also has a removable velcro piece on the outside of the upper heel to increase or decease this support. This liner also has a thin neoprene toe box providing extra comfort on longer skating sessions. Sam Crofts

[@timjr.jucotan9813]

@@PowerslideInlineskates thank you :-) Quick one though.. i saw there are 2 kinds in hedon skate. One is the second skin and the other one is second skin dual fit? Are they the same?

[@MaCostaII]

Will the crown liner give me more support on my next if I feel they are a bit loose and I have some extra space i don't want inside the skate with the recall liner?

[@BlackyRay_Patrick]

Great question. Did you try it out or did you find your answer somewhere. O got the same problem. The next skate is eitherway far to small or a bit loose. With a loose skate after some hours my outside ankles start hurting because im moving inside of my boot with the spc liner. If the crown would have a even more wider fit this might fix my problems.

[@MaCostaII]

@@BlackyRay_Patrick Yes i did try it and what I noticed is that the crown liner is wider in the ankle and the mid foot area, but it has the same toe box than the recall. The skate felt more snug but not enough at least for me. I still got some heel lift, I ended selling the skate. And yeah you are right, a few days ago I tried a smaller shell and it was too tight, the next are not my go to.

[@BlackyRay_Patrick]

@@MaCostaII uuh that sounds great this is exactly where I need to have a bit less room. In the middle foot section....

[@JSteez5024]

Do the liners naturally heat mold if you’re skating in 90degree KY summers?!?

[@PowerslideInlineskates]

90°C outside ^^ i'm not sure we would be skating.

[@JSteez5024]

@@PowerslideInlineskates haha we are Fahrenheit in Ky. I did the math though and hit the oven with the proper temp. Hoping it helps. I keep getting a blister on my right arch in the MyFit Chris Farmer pro Crown liners. My first aftermarket liners..!

[@traviztraviz7076]

What happened with the aeon XIX?? Its sold out? There will never back again?? I really hope to can get a pair

[@PowerslideInlineskates]

yes, the XIX aeons are sold out, but there are new ones coming out very soon.

[@kalelinslo235]

What about the Skinny Boy?

[@yoshawnsmith3573]

The crowns are legit for the Genesys.

[@chucktownattack]

Legitimate question? Why not include any sort of laces, even el cheapos, with any of the MyFit line when buying a complete skate from PS? Having some sizing troubles due to my extremely high "arch" (really- a high midfoot with a medium arch) and I think having laces to tighten them up ESPECIALLY while heat molding them, to really squish that middle tongue area down. I guess I should just invest in the Second Skins and look into heat molding the actual area of the frames thats causing me trouble. I hate that I'm having this issue because the skates are pure class, beautiful, exactly what I want, and fit perfectly length and width wise. Just that ankle area... Does anyone actually use the top two eyelets? I don't see how the stock laces would even REACH such the holes even with no feet at all inside in the liners. Seems like I need to get two more pairs of laces. A pair for the liners and a pair of waxed hock laces in a very small size for the top of the frames? Or just let it rock with the top strap, gradually break it in, and if I need the closure, get some hockey laces?

[@natuchisalitas]

How thick is the crown liner in the toe box?

[@PowerslideInlineskates]

compared to 2nd skins, a bit thicker, but overall relatively thin. pretty similar on the toe box to fatboy liners.

[@KroKogaming]

Hey son what are u cookin?? Aome nice fresh skates

[@pansnhansn]

If you don't look closely the oven looks like a microwave. I hope nobody puts the liners in the microwave =) Otherwise great tutorial.

[@martinzila2345]

in the unlikely event you got sh**s take your oven to your favorite pan and sit it out there

[@JohnDoe-el5ir]

Second skin are shit. After perfect fit for a while they squished itself on ankles and baking didn’t do any improvement. They are too thin on ankles although are almost in new state. I put Valo liners from m12 instead and they are gorgeous.

[@towers.164customs]

My liners didn’t come with laces…

[@PowerslideInlineskates]

please contact 1st the shop you buy the Liners and they will come back to us if any problems. Thanks

[@chinobean3555]

damn so 176 Fahrenheit?????'

[@kareemhafez1410]

My oven minimum degree is 125 is it okay ?

[@PowerslideInlineskates]

i would recommand to follow exact specs from the video...not warmer.

[@TimAches0113]

Is that Celsius C or Fahrenheit F for your oven temperature? It's 90c / 194f