This is awesome, I NEED TO REDUCE MY RIGHT ANKLE PAIN, the ankle is so tender to the touch now
@SpookyBoots3 жыл бұрын
Thank you for this! Simple and to the point.
@BladerReboot3 жыл бұрын
Great tutorial! Wish I had a video like this when I was heat molding my recall liners. I actually had to heat mold mine twice, because I was getting a little pain in my ankle. Turns out the first time I didn’t bake them long enough and the temperature was too low. Second time was perfect! Since I always skate with G form shinguards I put those on when I heat molded them the second time.
@ThirtyandRollin3 жыл бұрын
Good idea! Always best to try and heat mold wearing what you would when using them.
@Johney_Nomadic888 Жыл бұрын
This is a great updated video. The only other instructional video, or at least the one by Powerslide, is well outdated. Much appreciated. Thanks for such a great tutorial!
@RollersReturn3 жыл бұрын
Everyone needs to know to do this! Did mine and it’s a game changer.
@ThirtyandRollin3 жыл бұрын
It really is!
@andrewpaladino44073 жыл бұрын
Just got a pair of Maxxum Edge 125mm. Can't wait to try this and thanks for your video!
@ThirtyandRollin3 жыл бұрын
Awesome enjoy! And thank you!
@PimGeerts11 ай бұрын
thanks for explaining! my Intuition liners fit sooo much better now!
@PeterJohnsonJr2 жыл бұрын
Thank you for this! There is a definite lack of info even from the manufacturers. Just got FR1 80 Deluxe Intuitions, and this is a great starting place.
@ThirtyandRollin2 жыл бұрын
Intuitions are a little different. For those you will need to heat up a sock full of rice and let that heat up your liners.
@pobzgiddyinlineskater47553 жыл бұрын
Thanks for the video. Let’s keep rolling
@ThePascalbriand3 жыл бұрын
super cool video. I love the way you explain. thanks for all the tips.
@GorillaDev4173 жыл бұрын
Awesome video man! Bout to heat mold the liners in my new Next 90s.
@ThirtyandRollin3 жыл бұрын
Nice! Enjoy them!
@ericbernardi81163 жыл бұрын
Lucky man! Waiting for these SPC liners to be available again...
@ThirtyandRollin3 жыл бұрын
They are pretty nice!
@Cospirator3 жыл бұрын
I saw you are supposed to take out the insole or they would shrink. No issue?
@ThirtyandRollin3 жыл бұрын
I have heard that too but never have and didn't seem to effect them this time. Probably depends on the insole but wouldn't hurt to take them out just to be safe. Thanks for bringing this up!
@danielnavar53393 жыл бұрын
you’re super helpful dude
@Skiamakhos3 жыл бұрын
That's 82 degrees Celsius for the rest of the world :-)
@ThirtyandRollin3 жыл бұрын
Thank you! Sorry we have such a messed up unit of measure.
@Skiamakhos3 жыл бұрын
@@ThirtyandRollin no worries - we were using the same in the UK not that long ago. I just thought I'd save people some time looking it up, if they're watching from outside the US. It's a cool video - useful & informative.
@abdallah28923 жыл бұрын
Thank's Rolim....🇧🇷🙏
@brosq45663 жыл бұрын
What’s going on guys! Today, we’re making SNACKS! I know it’s a thing, but I’ll never not think it’s funny to bake your skates (liners)
@ThirtyandRollin3 жыл бұрын
Haha I should have named this episode baking with T+R.
@brosq45663 жыл бұрын
@@ThirtyandRollin missed opportunity! 😆
@pobzgiddyinlineskater47553 жыл бұрын
I really wanted to try this with some liners I have that really squeeze my foot but am not sure if they are heat moldable because they even don’t have manufacture or brand name. How do I know if it is heat moldable
@jadrollervlog3 жыл бұрын
I was just going to make a video about this!!!!
@ThirtyandRollin3 жыл бұрын
Great minds!
@jadrollervlog3 жыл бұрын
@@ThirtyandRollin hahaha except yours looks better than mine would have been.
@ThirtyandRollin3 жыл бұрын
@@jadrollervlog Naw
@MichaelMerritt3 жыл бұрын
Which liners do you use on your Rollerblade Twister Edge X's? New to the channel, great stuff!
@ThirtyandRollin3 жыл бұрын
I use the stock liners. You are a perfect tight fit for that shell and my foot.
@MichaelMerritt3 жыл бұрын
@@ThirtyandRollin Thanks for the reply! I'm 39 and getting back in this month on those skates. I clipped into my K2 Fatty Pro's from 2010 and the plastic cuffs snapped immediately lol. I might try your longer frame setup if I get the courage.
@kaylynbecker20683 ай бұрын
Can you heat the velcroed bottoms?
@MisterEyeGB3 жыл бұрын
Thanks for the video. Is it possible to re-mold liners as well? I have some Recalls that I've molded, but wonder whether I put too much flex at the ankle and would ideally like to mold them to a more upright position again.
@johnnydove3 жыл бұрын
yep! i have a pair of recalls that i’ve done a couple different times with different skates
@dimaawny45483 жыл бұрын
I don't know why but I thought one should skate with their skates once they heat moulded them, should one not? Like do I have to just sit with them until they're room temperature or can I skate with them after a few minutes of sitting? Thank you in advance🥰 I'm a fan from Egypt🇪🇬❤
@chilli-iceolive-abode24473 жыл бұрын
Wood Wood!
@carlosroubert86462 жыл бұрын
Hi: I’m new to Inline. Can I do that to my Roces M-12 original liners? I really want your feedback. Thank you!
@ThirtyandRollin2 жыл бұрын
Nope those are not heat moldable. The liners/skates will tell you if they are.
@threeballwilly Жыл бұрын
Old video so I understand if you don't get back to me. What were your decisions for swapping out the stock liners? I bought the USD Aeon 60s. Having measured my feet and comparing to their chart my feet fall in the upper end of USD Men's 11-12. Shoes I tend to wear 12-13. Space from heel to toe hasn't been an issue, but the boot squishes the top of my feet putting my toes asleep. I'm trying to figure out if I should go with a liner more specifically for Size 12 (one that's not accommodating Size 11 in any way), or should I heat mold the shell at the pressure points.. maybe both? Thanks for the video!
@threeballwilly Жыл бұрын
Sadly returning my skates isn't an option, so if they don't work out I'll have to sell them used.
@ThirtyandRollin Жыл бұрын
I would look for some thinner liners for your toes. The AEONs are a bit flat and wide in the toebox.
@threeballwilly Жыл бұрын
@@ThirtyandRollin Thanks for your reply, I appreciate it!
@Adham_Gawdat Жыл бұрын
My oven is not just heat its fire so the liners wouldn't burn like from the fire? Or do I use a microwave instead?
@ThirtyandRollin Жыл бұрын
Don't microwave them. You need an electric or gas oven.
@Adham_Gawdat Жыл бұрын
@@ThirtyandRollin but if I use a gas oven the liners would burn
@ThirtyandRollin Жыл бұрын
@@Adham_Gawdat They will be fine. They are not cooking over an open fame. Plus it is not hot enough to burn.
@RaedAlotaibirj11 ай бұрын
hi ,How long does it take to wear it after heating up?
@ThirtyandRollin11 ай бұрын
I usually leave them on for 30min or so. Or until cool again.
@Shad0wmoses8 ай бұрын
this vid works with myfit recall right?
@ThirtyandRollin8 ай бұрын
Yep
@panchymagogue2 жыл бұрын
Did it. Helped but not enough. I think these skates are going to become the kid's which means that I get a new skate day in the future.
@panchymagogue2 жыл бұрын
Remember to take the insoles out before baking, folks.
@ThirtyandRollin2 жыл бұрын
Awww dang sorry to hear that. Well at least the kids will have some nice skates!
@c6moneypit8 Жыл бұрын
So I have the myfit skinny boy liners in my new usd Aeons . I have skated them 2 or 3 times at the park without heat molding and they feel pretty good but definitely so snug it takes me a minute and effort to get my feet into them. Should I let them break in naturally as I skate them or should i definitely heat mold them?
@ThirtyandRollin Жыл бұрын
I would always heat mold asap.
@c6moneypit8 Жыл бұрын
Ok so stop riding them and heat mold ? Or think it’s too late lol
@ThirtyandRollin Жыл бұрын
@@c6moneypit8 Never too late. Just heat mold them.
@harvardh Жыл бұрын
Are the liners that come with the Aeons heat moldable? My foot is too wide for them, will heat molding help or should I buy a wider liner? Thanks bro!
@ThirtyandRollin Жыл бұрын
No I don't think so.
@harvardh Жыл бұрын
@@ThirtyandRollin do you know of any wide fitting liners? :)
@ThirtyandRollin Жыл бұрын
@@harvardh No but if you are looking to reduce liner thickness you could go with a Second Skin or Intuition liner.
@harvardh Жыл бұрын
@@ThirtyandRollin gotcha, thanks 🙏
@DontLeaveMeLucile Жыл бұрын
I was just watching a usd video about the new xxi's and they said the new stock liners are heat moldable
@basssmashin1875 Жыл бұрын
Is yours a gas oven or electric? All I have is a gas one .
@ThirtyandRollin Жыл бұрын
Gas
@andreibonteanu36553 жыл бұрын
Is it not important to lace up the liners as well? Seems like you just tightened up the hard boot around them.
@ThirtyandRollin3 жыл бұрын
You want to tighten them just how you would when you go for a skate. I didn't lace the liners on these because the tongue is too wide and the laces don't work well.
@diersa1823 жыл бұрын
What about twister edge x liner, are they heat moldable?
@ThirtyandRollin3 жыл бұрын
Good question. Unfortunately they are not. I really hope the next version of these incorporates some degree of heat moldability.
@diersa1823 жыл бұрын
@@ThirtyandRollin too bad they aren’t. Thanks for the answer. My feet got a very bad pain after using it for 10 minutes. The pain come from between the arch and the heel. I asked this because I’m gonna heat mold the hard shell, but if the liners were heat moldable, I’m gonna mold them first.
@ThirtyandRollin3 жыл бұрын
@@diersa182 The shell should help.
@jetjaxon3 жыл бұрын
Did you heat mould your Intuitions? You had Intuitions yeah?
@ThirtyandRollin3 жыл бұрын
Yep I did. You don't heat mold intuitions in the oven though. You use a sock full of hot rice.
@jetjaxon3 жыл бұрын
@@ThirtyandRollin yeah I saw the tutorial on that one. Intuition liner owners I have spoken to seem on the fence, like only heat mould IF they don't break in after say 20 to 30 hours of riding.
@ThirtyandRollin3 жыл бұрын
@@jetjaxon I am a fan of getting it done before I roll them. My thought is why wait for comfort and performance when it is designed to be heat molded right when you get them.
@MorbiousTactical2 жыл бұрын
So as long as I have the IQ of at least a squirrel then I should be good and not have to worry about messing them up. Got it haha
@ThirtyandRollin2 жыл бұрын
Exactly!
@ItachiUchiha-lr3yr2 жыл бұрын
Don't heat mold them it does the opposite of what you want. You want a fat full liner that fills the skate & clings to your whole foot with pressure. If you heat mold them your basically making them like memory foam you are compressing them so now they are permanently squashed flat around your foot so not putting pressure on your foot or the inside skate of the skate. Imagine if you heat molded your sofa to your ass, it wouldn't give you support.
@ThirtyandRollin2 жыл бұрын
Only compressed in the areas your foot needs it to be compressed. The rest is still puffy.
@Lilgus84 Жыл бұрын
I just got my first pair of Faction skates which are heat moldable. Their instructions say to do it worh the linear in the boot/shell. Same temp but for 18-20 mins. I’m absolutely terrified that something will go wrong and I’ll ruin my skates. Have you ever moldable skates with the boot,strap, laces and linear all together for that time frame?
@ThirtyandRollin Жыл бұрын
Ya it's really not too hot. But if you are nervous just shave off a few min. You should be fine though.
@Lilgus84 Жыл бұрын
@@ThirtyandRollin even with everything they are saying to include? I’m Mainly worrying about melting the plastic or integrity of the shell and boot.