PPE Carbon Intake Pipe replaces S&B on my 3.0 Duramax

ppepower.com/c... 3.0 Duramax Diesel Silverado and Sierra 1500 LM2 LZ0
Should be released in 45-60 days.
Pre-Production parts shown. As an Amazon Affiliate / Influencer, I earn from qualifying purchases. Your support is appreciated as it helps the channel to continue to test products!
www.duramaxnews.com

[@gasparsperformance9841]

Man I hope they release these sooner than their eta date. I just bought a stillen air duct, k&n drop in filter, and ppe Intercooler pipe with silicone hoses. I won’t be installing any parts until I can get my hands on a ppe air intake pipe.

[@DemonWorks]

This will be a perfect compliment to all of those other pieces!

[@nikkicovack]

These are super helpful videos, looking at a 3.0 for my next and look forward to putting some of these additions on!

[@MormonEspresso-xg3fu]

I just put the forged carbon intake pipe with the silicone air box pipe, an s&b hot side intercooler resonator delete and an AFE air filter on my 2024 Cadillac Escalade. Love the new idle sound, it sounds like a real diesel now and throttle response is better.

[@bryce850]

Sweet, will be interesting how the ecu will adapt to the increase in air flow.

[@jakedorm]

Just installed mine this weekend from an early preorder. Easy install, fits perfect, sounds great. Seems a little better on torque, I noticed 1 mpg gain immediately from the vehicle computer on easy driving. We'll see how it pans out over the next few tanks if I can keep my foot out of it.

[@DemonWorks]

Great to hear!

[@gasparsperformance9841]

It would be cool if you can get another stock intake pipe and cut it in half to show how it looks inside

[@DemonWorks]

That was actually a plan on this video but I didn't line one up as I expected.

[@The71chevyman]

​@@DemonWorksI will send you my stock pipe to cut up if you want it. After I get my hands on one of the new pipes.

[@DemonWorks]

@@The71chevyman that’s a discussion we may need to have when that time comes. I know ppe cut one up, unsure if they would share some pics with me. I should have asked. 😆

[@lucasbriones4531]

It looks so sick! I'm glad the install went well! It looks good with the PPE air box to intake tube coupler 👍

[@edgerlyb19]

Got mine in the mail yesterday, hoping to install tonight!

[@DemonWorks]

YESSSSSS!!!! let me know how it goes!

[@edgerlyb19]

@@DemonWorks fitment is perfect! I can notice some increased throttle response and subtle noise increase

[@user-qg4hh1yu2z]

@@edgerlyb19did you have mpg increases?

[@michaelrowe7194]

Shut up and take my money PPE!

[@alchemybuild]

Soo wondering how this would do with the Banks Pedal Monster and I dash- and if you re-installed the S & B Cold air intake would the Banks system make the best use of that cold air intake. I basically am looking to better mileage and okay would like better performance. Thanks for your videos. I was about to buy that cold intake but stopped once I saw your video. Maybe when Banks comes out with one next year it will all work better?

[@woodysapper7]

So does all this fit the 2021 3.0 yukon. Every time I look, there is nothing for it.

[@DemonWorks]

It should. I am only aware of the airbox being a little different in SUV applications. I have not tested this in a SUV though.

[@edgerlyb19]

Man, I'm stoked about this! Love the sound and the hope for improved throttle response. Anticipated cost?

[@DemonWorks]

I'm really liking this pipe. great throttle response and sound. Airaid intake up next. Unsure on price but we should know soon.

[@alchemybuild]

I had a hard time with that bolt way in the back. Any tips on taking the old one out?

[@DemonWorks]

I use an electric ratchet to loosen as well as a wobble 7mm socket.

[@alchemybuild]

Oh wow why didn’t I think of that 😫

[@robbyvaughn4450]

Great video as always !

[@DemonWorks]

Glad you enjoyed!

[@SterlingAT4]

Any tips for installing the intake pipe? I hear it’s quite difficult. I just received mine in the mail today, as well as the hose kit.

[@DemonWorks]

It’s not difficult, I actually have in depth video of me doing it but never assembled for upload on KZbin. Maybe tonight I will try to piece it together and give you a better look at it.

[@MormonEspresso-xg3fu]

I ran into an issue where the oem rubber turbo boot was stuck to the turbo. Only 800 miles on the engine. It was a pita to remove but got through it by breaking the boot off. Worth the fuss tho lol sounds amazing

[@BC_Dawson27]

Wondering if you can help me, I have a 22.5 lm2 and I recently installed the PPE carbon fiber intake and S&B cold air intake and the initial test drive went great no codes but the next day after driving for 5 minutes I got a P0421 code and just wondering if my upgrades could of caused it?

[@DemonWorks]

ugh, hate to hear that. Yes, I believe it is induced by the additional air. I do not like the design of the S&B and I bet if you went to the stock air box, you will have the same or more power and no light on. That being said, the ecm has had a few updates available and one of those may make the system a little less sensitive to be able to accept the additional airflow.

[@BC_Dawson27]

@@DemonWorks yeah very annoying and I might switch back and see what it does if not I guess I’ll contact the dealer to get me an update

[@BC_Dawson27]

Update: make sure to turn your air filter life off first and not after you’re done, just had to turn mine off and unplug the battery and check engine light is gone😂

[@MikeTyminski]

Link to the PPE elbow coupling you used for air box? Excited for air-raid video. I got a response from them when I asked why they didn’t make a intake pipe… they said it made no difference in performance that’s why they never developed a mid pipe like they have on earlier gassers… which I find bizarre

[@DemonWorks]

I agree, very bizarre, that's the only piece that really makes a difference, in my opinion. The elbow is part of the Charge air cooler hose kit, I am hoping they provide it with the carbon pipe though.

[@rickreyes9733]

I currently have a stock LZ0 and am looking to enhance its sound. Would this be the optimal choice when paired with the stock air box, or do you suggest an alternative option? Thanks

[@BCBpanteraclassic]

Little off topic but quick question. On my 21 At4 1500 with multi pro tailgate the back up camera is aimed super low, any way to adjust this?

[@DemonWorks]

not that I know of, never attempted.

[@OnceUponATraveler]

If you aren’t using the regular carbon tube you can send it to me and I’ll test fit it and run it for PPE! I’ve got most their stuff except for the pans and coolers.

[@DemonWorks]

That one is making its way onto a local truck as part of a big tow test video we are doing, sorry. Happy to see the PPE support though ! They’re a great brand for us, the 3.0 enthusiasts!

[@OnceUponATraveler]

@@DemonWorks darn! Looking forward to the Airaid install video!

[@OnceUponATraveler]

@@DemonWorks also… are there any reviews out on the AFE dual rear exit exhaust system? Or does anyone make an exhaust system that fits the dual rear cutout? I can’t do the side dump locations because it’ll look stupid with nothing where the factory dual cutouts are.

[@DemonWorks]

@@OnceUponATraveler I don’t know of anyone running that afe and I have no plans. Their customer service failed on me and I will only buy their product if I absolutely had to. The side exit does look a little off with rear cutouts, looks better with the chrome pieces removed but I hear ya. My previous truck, I planned on running an aftermarket rear bumper. That ship sailed now though.

[@paulsmith-ld8xl]

U need to dyno truck and compare too stock

[@DemonWorks]

Not interested in dyno numbers

[@josiahjohnson3121]

500 for a piece of carbon and rubber that no one sees to get the sound? Do they not make this in plain plastic?. I’m not popping hoods or going to car shows?

[@DemonWorks]

The waiting list is packed anyway. They cannot keep up with the demand of it.

[@joeinfante2946]

Have you heard if they will ever come out with a plastic version?

[@DemonWorks]

In my discussions, no plans for a plastic one. These are premium hand made and they have a huge waiting list on these with early orders just shipping.

[@jaredharbaugh8419]

With this work with the k&n airbox?

[@DemonWorks]

yes, check it out here - kzbin.info/www/bejne/fnu4mYOwd9eho7c

[@anthonymaniotis3134]

Will installing this throw any cel codes ?

[@DemonWorks]

If installed correctly, it should not. Mine has been installed for a few months now with zero issues.

[@adambejarano1698]

Is there link to purchase this part and also the elbow replacement keeping the stock box

[@DemonWorks]

not yet, should be soon though.

[@kennethbohrer5796]

Lol man CFT must have really pissed you off. Hey how about some heat wrap around that charge pipe?

[@DemonWorks]

It’s a running joke at this point 😂 I don’t have any intentions of heat wrapping it.

[@edgerlyb19]

I saw these are now listed on PPE’s website but unfortunately, they’re sold out. Anyone know what they were sold for?

[@DemonWorks]

I don’t think they have been sold yet. Just added to the site

[@edgerlyb19]

@@DemonWorks confirmed. They’ll be sold for about $500. Hope to have mine soon 💪🏻🎶

[@roryloveland]

Out of curiosity, what didn't you like about the S&B intake box? Couldn't seem to find a video explaining that. Sorry if I missed it.

[@DemonWorks]

I noticed a drop in MPG, higher intake air temps and on testing, a loss in power. It did give me better throttle response though !

[@TheDeadernie]

Any plans for before and after Dyno results with these parts?

[@DemonWorks]

No plans of that since I don’t have a shop with a dyno and rental to test every part would be insane. I was doing dragy testing on the ppe and S&b parts a while back and that data is in those videos. Currently, no plans to do it again or go any further. Just here to share info. I will have to mention, I am working on a huge towing/charge air cooler test and that may be something you will want to see.

[@scotted6763]

Does the grommet simply push in?

[@nabatron21]

You think PPE will make a carbon air box?

[@timflannigan3042]

Can you use the PPE pipe with the S&B air box?

[@DemonWorks]

Yes, works fine together.

[@jackmackleit2376]

When do these come out. Been looking and couldn’t find them

[@DemonWorks]

a month+ out.

[@ZmannR2]

Still don’t have these for sale ☹️

[@DemonWorks]

I hope you got on the list for the presale 😬 should be shipping any day now

[@ZmannR2]

@@DemonWorks nope never even knew of the presale

[@gasparsperformance9841]

Do you think the carbon intake pipe would provide a cooler intake air temp over the factory pipe and plastic S&b pipe?

[@DemonWorks]

I don't think there will be any cooling differences.

[@khristofer1979]

with all the mods you are installing on the engine and trans, do you notice a gain or drop in MPG? and also how much power do you think you have gain over stock

[@DemonWorks]

I cannot say how much mpg I gained or lost, I have full records of every tank full but once I added the heavier wheels and tires, my mpg went down 2-3. With certain tests, I noted loss of mpg with most items. This pipe added throttle response and sound, too soon to comment on any mpg change. I don't run the truck on the dyno or race it, so I cannot say what hp/tq gains there are. I just know my light throttle response and power "feels" better from the driver seat,

[@khristofer1979]

@@DemonWorks sounds good, we’ll if you do run some tests down the road, I think that would be a video worth making! I am definitely thinking of getting a few parts you have installed but I’m not nearly as skilled as you are to feel confident to install all the things you do at home. I’d probably need to have them installed professionally

[@DemonWorks]

@@khristofer1979 I try to do my videos to show people this stuff isn’t that difficult and most can tackle it themselves. Let me know if you have any additional questions on installation of anything.

[@khristofer1979]

@@DemonWorks the videos you post are pretty informative and most likely I could do about 70 percent of what you’ve done but I lack the space and some of the necessary tools. I’ll reach out if I need any further information on anything.

[@CAS-2021]

Has the carbon fiber been certified ha.

[@DemonWorks]

certified in which way?

[@Vacationland019]

Will the production piece have a smooth coated finish on the inside? Looks like exposed carbon on the inside

[@DemonWorks]

I am pretty sure it will be just like the one in the video.

[@Vacationland019]

Is the inside smooth to the touch? Depending on production process sometimes carbon fiber can leave one side unfinished and rough and may break down sooner or let carbon into the intake.

[@rickschwartz2447]

what does it give you ? more power?

[@fxnytroxtxFPP]

Did this pipe drop mpgs? Because i tried the cft pipe and my lzo did not like it at all, i lost about 4mpgs with that pos

[@DemonWorks]

I’ve reported on CFT pipe being junk as that’s a terrible business. Be sure to give them a Google review, on their site, they just delete negative reviews. This pipe did not hurt my mpg at all. Getting my best mpg with this pipe and K&N intake.

[@MiddleGroundGarage]

Any projected pricing on this unit?

[@teufelhunden222]

What kind of mileage are you getting with all these mods? cruise set at 70, 75, and 65?

[@DemonWorks]

I just installed these so I don't have that data. To add to that, mpg can vary so much with any regular 70/75 testing and I feel the real tests are from tank fill ups.

[@adkgrass]

Truly tho, is the CFT that disappointing?

[@DemonWorks]

100% that’s the last you will see it from me as it made its way into the trash. So many people online have spoken how they got burned on the purchase as well. Just trying to share info, good or bad, like I always do in my videos.

[@adkgrass]

@@DemonWorks i appreciate it. will be holding out for the PPE.

[@coryklump7645]

Anyone get an engine light after installing the PPE charge pipe?

[@DemonWorks]

What code are you seeing? There are several reprograms that have come out for a list of minor issues.

[@coryklump7645]

@@DemonWorks it was a code for fuel running lean. Had the code cleared and called PPE. They said to just monitor it and if it comes back to let them know asap and that no one else has reported this before. I’m east coast and just had a K&N intake, the PPE charge Pipe, and the PPE resonator delete installed so I’m sure the cold air and recent install just is tripping the MAF sensor. Hopefully it doesn’t come back on.

[@DemonWorks]

@@coryklump7645 I had that exact setup and I had a code pop up for egr valve, turned out to be part of an update to the programming. I always have another egr related code in the background, but it doesn't pop up the light, so it's not a hard fault. That being said, I had another issue once... It was a nox code for lean on decel. I found my air filter fell off ... Reinstalled and good to go. Now, what I suggest is you double check everything, it's easy to roll a seal and then clamp it down and have an air leak. That would happen most likely near the turbo side. The other thing to look at aside from the air filter falling off is the bolts for the air filter tube. Make sure that seal is straight and tight. Lastly, go to your mass air flow and make sure the adapter was installed correctly and the seals are in place. It is possible to mount the mass air flow sensor backwards with the adapter piece .... hope this helps!

[@coryklump7645]

Was that EGR code a P402 that you remember? I have that on now. The P171 (running lean) isn’t on this time. I gotta check the MAF sensor when I get home to make sure the guy who installed didn’t put it on backwards is my next step.

[@thomasstdennis4885]

Can that be used in California ?

[@DemonWorks]

I'm surprised you guys are even allowed to drive in California ( I moved out about 4 years ago). To answer, I would assume it will get the 50 state legal stamp like PPE did with the charge air cooler but that takes time.

[@l4stclip]

​@DemonWorks bro your so right I hate it in ca.

[@BSO_Actual]

Let me buy the one from PPE you dont use 😂

[@DemonWorks]

I think a lot of people want these ! The second one is going on a truck that will be a feature video in a few weeks. Pretty big test of products that I think everyone will enjoy.

[@BSO_Actual]

Yea man. I'm gonna get one when they drop. My truck is currently at the dealership because the digital mirror keeps shutting off randomly and they can't figure out why but once I get it back, it's on...

[@gasparsperformance9841]

Buying the other one from him would be a problem because I want it too. Lol

[@DemonWorks]

@@gasparsperformance9841 😂

[@slaw8609]

So after a few years of owning a 3.0 would you say they are junk?

[@bpl0807]

Considering this is his third 3.0L, I have a feeling he would say quite the opposite.

[@DemonWorks]

4th 3.0 Duramax, I think they are great engines! Thankfully, had every year and they were all a little different from each other. There's a reason why it's the only light duty diesel engine still being sold in the 1500 trucks.

[@tlarson6720]

Had my LM2 since 2019. Would buy again.