PPG high build primer on the Mach 1. Slither part 53.

[@ericjohnson8364]

It is amazing seeing it in the different primer colors. It is going to be amazing once finished

[@donsmanufactory]

Something so gratifying watching the primer spray on.

[@blackgtx]

Outstanding! I love following the progress on Slither, it will be amazing when finished…👍👍

[@RustysRestoration-dw1mu]

The high build laid down nice! Always feels good to get it in one color 👍👍

[@terremolander5243]

I really enjoy these weekly videos on Slither. Nice job on the seam sealer and primer.

[@saabtech3510]

A Box turtle! So cool! I found one in our yard when I was 6 years old in NJ. I kept him free, but the bully next door found him and put him in a cage in his garage. We launched a secret rescue mission and set him free. (I earlier had to rescue him from another kid who wanted to punt him like a football. Future psychopath.)

[@JoDaddysGarage]

We seem to have several around our property. Always careful with them.

[@errolpoxleitner7901]

Looks pretty darn good.

[@Stang95Bang]

Hell yeah!!! Go Barry go!!!!

[@stevesmoneypit6137]

Rewarding to get in a single color! Shows progress 👍🏻

[@micseph6186]

Slither looks good in gray - promise of things to come.

[@MrFireman164]

Looks great Barry !

[@roberthirshfield3571]

Coming along really nice

[@billy.s.warner]

gorgeous!

[@stevereid53]

Looking great wish mine was that far

[@gregworkshop5713]

hi barry the car is going good. 👍👍👍👍👍👍👍👍😄

[@avomarkarian6187]

Nice videos can you tell me what’s the steps after taking out the paint and bando from the car ?

[@JoDaddysGarage]

It depends on the condition of the metal. Some will have to be cut out and weld in new pieces. Some may be ready to straighten and add epoxy. I have lots of videos covering these questions.

[@MrMikey1949]

Good job sir,

[@JoDaddysGarage]

Thanks

[@DanTheManIOM]

What did you sand the epoxy on the roof with ? 9:36, a solder brush and lacquer thinner gives you a factory look....that's what I did with that product 30 years ago ! Damn, I must be getting old. p.s. I used your tape trick on some sand slick just a few days ago when priming cadillac parts fender extensions, fwiw.

[@JoDaddysGarage]

I used 400 grit.

[@curtiswatkins4909]

Hi Barry, When you scuff the epoxy primer , what sand paper did you use on the orbital sander for light sanding before applying high build primer.

[@JoDaddysGarage]

I used 180 grit, but 400 would work.

[@JoDaddysGarage]

Correction. I did use 400.

[@johnlindsay6039]

Barry, I very much enjoy your videos and especially the subject matter, as I too am restoring my 69 Mustang Mach 1. In fact, I am right there where you are now on Slither. I hope you carry this project through all the way to completion! Anyway, I'm blown away that you sprayed that 2K high build with a 1.4 tip. Can you confirm that? Also, I'm a bit curious about sanding the epoxy prior to the high build. Can I ask how much time passed between spraying the epoxy and then the high build? Could you have sprayed the high build directly over the epoxy after a couple of days without sanding? Lastly, I watched you work on those sail panels with those Durablocks, which I also attempted but abandoned as they were just too stiff to pick up the contour. I know your skills are better than mine, but my work in that area and others was made some much easier with a more flexible block. Might I recommend Black Diamond sanding blocks! Thanks Barry!!!

[@JoDaddysGarage]

Thanks. As per the data sheet, it calls for a 1.3-1.6 tip. As far as sanding, I was just trying to remove some of the texture from overspray. Typically you have a 4 day window to top coat without doing anything. The trick to sanding is letting your wrists move with the body lines, and knowing when to stop.

[@davetyson2331]

did you do something to the deck lid to fender extensions ?

[@JoDaddysGarage]

Do something?

[@davetyson2331]

@@JoDaddysGarage should have watch video first

[@rongamble9884]

Ppg how much a gallon was that there not cheap anymore

[@JoDaddysGarage]

I’m not sure. The owner bought it.

[@rongamble9884]

@@JoDaddysGarage I liked ppg but they got to proud of there products I switched over to Sherwin Williams refinish

[@1977jed]

Hmmmm....I was taught to use Self etch....Scuff lightly for Debris. Then Epoxy and body work..... I know everyone has their own technique.....Do you think yours may be better? Not downing your work at all! Just honestly curious what you think.....

[@JoDaddysGarage]

I am doing it as I was taught by my PPG rep.

[@1977jed]

@@JoDaddysGarage Easier sanding?

[@JoDaddysGarage]

Can’t say for sure.

[@1977jed]

@@JoDaddysGarage Okay.....Im always looking for easier ways to get it done....BUT do it right.....