Рет қаралды 2,130
#rocking chair #windsor #walnut
I always wish to make elegant windsor rocker. and Finally a months ago I did it. I followed instruction by famous chair maker peter galbert. This instruction included in FineWoodWorking March/April 2011.
English subtitle is available but my translation may not be accurate. please understand that.
Thank you for watching my videos.
===========================================
00:09 prepare stock, rough cutting
01:58 prepare wood for bending part
04:18 turn legs with lathe
05:55 turn stretcher with lathe
07:11 steam bending
08:45 laminating seat plank
12:17 boring mortise hole in seat
16:53 tapering tenon of legs and reaming mortise of seat
19:23 seat carving
25:27 drilling mortise at legs
27:15 Assemble undercarriage(gluing)
28:51 Make Uppercarriage. Start with armrests.
36:45 Make rockers
38:38 Cut slot at the end of legs
40:19 Assemble backposts, armposts, armrests
43:35 Make spindles(shaping and making tenon)
46:43 Make Joinery of crest rail and backpost
49:52 Assemble Uppercarriage(gluing)
52:27 Determine position of rocker and gluing
==============================================
1.bevel square with digital protractor : 31$
www.amazon.com...
2.laser level : 17$
www.amazon.com...
3.tapered tenon cutter : 120~140$
handtoolwoodwo...
4.tapered reamer : 150$
www.timmanney....
5.scorp : 158$
barrtools.com/...
6.compass plane : 110$
www.highlandwo...
7.travisher : 175 £
thewindsorwork...