Pre Amp Test: -18 dbFS vs 0 dbFS - MIDAS M32 MR18 + BEHRINGER X32 X-AIR XR18 XR16 XR12 X18

[@levous2]

I’ve been struggling with gain setting on my xAir for several years. Growing up in the 90s, I learned to push gain to just below clip. Thank you for these videos! I finally see why my mics feed back like crazy. I can’t wait to try -18db. Annoyed that it took this long to learn.

[@RuhjedVentula]

they should have -18dbfs level indicator on the mixer meter not -20 and -10

[@andym7333]

is the master lr same rule to output at -dbfs 18

[@abemichau4706]

Good advice. Thanks

[@kimspelberg]

The difference in sound is because you use different EQ settings for channels 15 and 16 !! (check around 3:35)

[@MusiciansPro]

No. They are the same during the TEST. WE clearly stated after the TEST that we were back to our VO settings.

[@trentreed6928]

👋 would like to chime in here, - what you were saying about every channel adding 3db would only be true in theory (say if you generated two channels of noise at the same db rms level) but when you're talking about realistic audio signals adding together, the math isn't that straightforward forward at all. The implications of what you were saying would make mixing 100+ channels impossible if it were true.

[@noartifacts1983]

It's even harder on the iPad app . There's no indication at all....

[@littletinaandflight5]

Ironically, I find the audio on this video too quiet. Sorry, just saying. Good content.

[@huss03]

The +45dB sounds better.