Predator 212cc Swapped Monster Moto

I got a killer deal on this thing for $50 bucks. Then I 212 swapped it a few months ago. I've a lot of fun with it.
So, here's a video on how to swap it :)
Like and Subscribe

[@louisianarebeltv4878]

It has a Tillotson 212 on it now the predator blew up 😂

[@BikeReviewsWithTom]

How did it 😅😅😅

[@MountainEagle77]

Did the flywheel explode?

[@MountainEagle77]

That’s nice. Where is the video of you riding this?

[@andrewurban8583]

I did the same but used a different engines on 2 of them. I just lifted the back of both of my engines and they run pretty wild but fun....

[@juicethekidd7599]

Link to the tires?

[@tomfuller9963]

I'm almost done doing this same swap. You can buy a riser kit from Go Power Sports in order to get the carb clearance from the frame, it's a 1in. square tubes that bolt to the engine plate. I found out the hard way a # 30 torque converter will not mount on this frame, if you decide to go that route. My first try working on a mini bike so jump in go for it. There are plenty of vids on YT to help you out. Thanks for sharing!

[@louisianarebeltv4878]

Thanks for watching! Yeah, it kind of sucks you can't put cvts on these cause clutches kick you in the ass and strip out your sprockets 😂😂 A frame riser is usually out of stock at go power sports and that's another cost. But whatever floats your boat.

[@louisianarebeltv4878]

I would aslo HIGHLY recommend these 3 things 1 Smaller rear sprocket 2 Front suspension 3 Killswitch. also I made a great video bout how to wire up a killswitch here's a link kzbin.info/www/bejne/al7EiKulbayAmZY

[@Rioluvbuttons]

Where did you get the exhaust from

[@louisianarebeltv4878]

www.ebay.com/itm/253950314621?_trkparms=ispr%3D1&hash=item3b209e487d:g:2jsAAOSwIY5hgAWY&amdata=enc%3AAQAGAAAA4PSkdAZC83G31eqj%2FL1Y5iSty5gVnJCgo3Ngb53DdbuND5pT7dhiKqrNa49lACuvNb8WqL8GnluPGKU21PxP5QOaPXbs265%2BxjYiURMKHJGTeUjeIyAjCs%2F4%2B27yOaM%2Fvq%2Bxh6JUYHoSdKMK%2FLMCNCcTVkhOjV76P90L4dXV8sHnYCxqc25Gav2%2FXwVVFAtk4MRvDKJHhkxYtPs1SrFl54sKLN8xhixOnFVRloRJPjesfMmPU1IHnk2IiBgiT1NT%2F%2Bl1d45itn6nagaLMwugciUJblzScztPG0MObQKGsghK%7Ctkp%3ABFBMroiytZFg

[@Rioluvbuttons]

Where did you get the exhaust from

[@eddiesheeran5791]

Awesome dude! I've got the same bike. I'm finishing up my engine swap now! I can't wait to rip around the neighborhood.

[@owenschofield1790]

What model monster Moto

[@louisianarebeltv4878]

2017 Monster Moto mm-e1000

[@Rioluvbuttons]

Where did you get the spacer for the carburetor from

[@louisianarebeltv4878]

you will have to cut it to make it fit www.ebay.com/itm/185171570327

[@owenschofield1790]

Did you modify the frame at all and is that the stock motor mount

[@louisianarebeltv4878]

I had to drill out some holes for the motor to bolt up. no I didn't modify the frame. but I used a spacer on the carb cause the air filter adapter was hitting. on a stock motor you'll have to trim the air box to make it fit.

[@Theoutdoorboys-os6uj]

@@louisianarebeltv4878what’s the space called

[@blankznasty]

And did u put a bigger carb or same one and put intake adapter and filter?

[@louisianarebeltv4878]

@IHitClipzs Its the stock carb with a aftermarket air filter and adapter (with spacers for clearance) and I put bigger jets in the carb plus a header pipe valve springs gov removed. this setup is very strong and fast be safe

[@blankznasty]

I did the exact same build with my monster moto but still have stock 75 t

[@louisianarebeltv4878]

@IHitClipzs yes, I did a sprocket swap. It made it alot faster 55-60 MPH I'm currently using a 56t rear split sprocket Here's a link www.gopowersports.com/split-sprockets-35/ and I will probably swap the 56t to 52t. and you'll need a sprocket adaptor here's a link www.gopowersports.com/universal-sprocket-adapter/ but if you do the swap it starts to get really dangerous and really fast, so I'd suggest putting on new brake pads. here's a video for that kzbin.info/www/bejne/aWjFiGB-qdFnkNU

[@blankznasty]

@@louisianarebeltv4878 yes damn hell of a diffrence i just orderd the 53 or 54 t split sprocket from gopowersports just have to wait till the adapter is back in stock!

[@bradenfrasure4957]

@@louisianarebeltv4878 can you still wheelie?

[@louisianarebeltv4878]

@@bradenfrasure4957 Yes, but not as easily which is a good thing in my opinion because you can step on it and not wheelie. but with you want to wheelie it's still really easy too

[@louisianarebeltv4878]

@@blankznasty here's a link to a adapter that's just as good as Gopowersport's and it comes with hardware which gopowersport's doesn't www.ebay.com/itm/203929116792?hash=item2f7b1f6078:g:vmsAAOSwWSBia6ef

[@doublea6364]

So you had to drill holes? What would happen if I didn’t drill any and used the original?

[@louisianarebeltv4878]

you can't use the original holes. the engine won't mount up use a white sharpie and stick it in the engine mounting holes make sure that the chain lines up then drill

[@ricardomorales6425]

Bigger or smaller sprockets??to go fast??

[@louisianarebeltv4878]

smaller sprocket rear sprocket to go faster.

[@BizWiz]

Rebel, we never got to see her run!!!

[@louisianarebeltv4878]

Sorry bout that. I'm going to make a new video dedicated to it running speeding by and wheelies and more. subscribe so you won't miss some awesome action

[@BizWiz]

@@louisianarebeltv4878 cool man , I love monster moto , I just built the b212 with ghost engine , going to buy the mega moto 80 kit next week from go power sports.

[@blankznasty]

I wanna go faster

[@louisianarebeltv4878]

@IHitClipzs faster is fun but if someone pulls out in front of you when you are going 60MPH you might think otherwise. I love to see people doing mods but please be safe