I waited too long to test my generator, when I finally did it was past the return period. It was surging right out of the box...I thought I was out $850. Saw this video, drained the carb, adjusted the screw, poked out the jet. My genny is currently purring like a kitten, thank you!!!
@BeastFamilyADV Жыл бұрын
Glad to hear it! Thanks for the comment!
@jesseramirez4836 Жыл бұрын
Thank you for the info!! I actually bought a tachometer on Amazon and calibrated it that way. Manual states 2600-3600 rpm. I let it warm up, put it eco mode, tuned it down to 2600 rpm, it took only a minute to tune. No more rough idle after cleaning that piece.
@BeastFamilyADV Жыл бұрын
Oh wow! Awesome idea with the tachometer! Thanx for the info!
@daltonsbandАй бұрын
Which tach did you buy?
@randyirby79682 жыл бұрын
I have this same generator and had the same trouble with it surging. This worked like a charm. I was afraid I would have to spend a $100 or more to have it fixed. Thanks.
@BeastFamilyADV2 жыл бұрын
Glad to hear you had success!
@keithrodrigue60383 ай бұрын
My predator with 746 hours lives on thanks to your video! I also evacuated old gas and drained carburetor bowl and now it's running like new!
@BeastFamilyADV3 ай бұрын
Awesome! Glad to help! Thanks for the comment!
@commonsense4you14 күн бұрын
The innernet is full of specialists. Amazing.
@BeastFamilyADV13 күн бұрын
Lmao oh, I’m no specialist trust me. Just an average joe
@Sturdyhart Жыл бұрын
That worked beautifully - I thank you for putting this video out there for the rest of us to benefit from your expertise.
@BeastFamilyADV Жыл бұрын
Lol I appreciate the kind words but I am no expert lol just a guy that found a solution and wants to spread the love lol
@alemar9 Жыл бұрын
Thank you so much! The storms in California have been repeatedly knocked out my power in the last few weeks. My Predator sputtered and died last night, I thought it was a goner. This worked beautifully and as you had displayed it wasn't complicated. However, I would have had to bring it in for repair without your video. THANKS!
@BeastFamilyADV Жыл бұрын
Your very welcome!!! I’m glad I was able to help! Sorry to hear about your power issues I’ve there
@Handirifle2 жыл бұрын
Thanks for the great video. I have changed the jet size, and had it running like a top, until today. Was running real rough and only when on full choke. Your vid reminded me of the tiny jet. Removed, cleaned it, and now it purrs like a kitten again.
@BeastFamilyADV2 жыл бұрын
I also went to a colder spark plug. Instead of a 7 it’s a 6 now NGK brand. I ordered it from Generator upgrade supply. Seems to run a lot better with the new plug too. Did you go with a smaller main jet? Mine runs super rich and was thinking about leaning it out. Lean and mean!
@Handirifle2 жыл бұрын
@@BeastFamilyADV yes but I do not recall what size jet it was. Was ordered from a link at one of these videos.
@louiswestfall9622 Жыл бұрын
@@BeastFamilyADV I think you'll find that NGK heat ranges are the opposite of what you would think, a higher number is actually a colder plug. onlysparks.com/wp-content/uploads/2022/12/heat-range-image-for-website.jpg
@BeastFamilyADV Жыл бұрын
@@louiswestfall9622 lol I knew I was getting it wrong lol thanks for the info! I ran the #8 plug (colder) this weekend and it ran great! Put just about 40 hrs on it and only had to refill it with 1 - 5 gallon jerry can. It was running a Dometic fridge, window shaker a/c and some led lights. Oh yea, a projection screen for camping movie night too (video coming soon) lol
@boblitwinsandymateer13202 жыл бұрын
Thanks for the video. Quick easy fix. I used a single strand of twisted copper wire and carb cleaner. Worked like a charm. Will put this on my maintenance list. You da man, thanks.
@BeastFamilyADV2 жыл бұрын
Awesome to hear! Glad it worked for you!
@charlesgriffin22083 жыл бұрын
Been running 3 months almost non stop. Loping then died. Makes sense. Appreciate it
@khalidalsulaiti77072 жыл бұрын
Thanks it fixed my problem with the generator did exactly what you did and it’s much better now after almost 2 years of storage
@BeastFamilyADV2 жыл бұрын
I’m really glad to hear it!
@graylingdrummond94214 ай бұрын
Mine is brand new and surging at idle, was going to take it back but I will try your method first, thanks great video.
@BeastFamilyADV4 ай бұрын
If it’s still within the timeframe I suggest just exchange it! If your outside warranty, then give it a try.
@saintgermain60313 жыл бұрын
Great job. My generator is doing the exact same thing. I need to adjust this also. Thanks!
@BeastFamilyADV3 жыл бұрын
Glad it helped
@stanjarmolowicz2 жыл бұрын
thank you so much ...you saved me ...i have this generator 4 years and work great until now . i did change oil probbably more often than recomended . once i have issue in the past was clogged exhaust ..it build up carbon so badly that there was barelly any flow and ofcourse didn't work right . i just removed the screan and after that was like day and night in performance .
@BeastFamilyADV2 жыл бұрын
Glad to hear I could help!
@wilber195419 ай бұрын
Paid 350 dollars for mine, bought it at an Estate sale. Had less than 10hrs on it. Love it.
@BeastFamilyADV9 ай бұрын
Oh man! What a deal! I’m coming out with a new video on the update with the 5000 we just bought
@hagsmich2 жыл бұрын
This worked for me on my 8750 Predator generator. Thank you so much. I used a needle, carb cleaner and a compressor to clean out the blockage.
@BeastFamilyADV2 жыл бұрын
Nice! Glad it helped! Thanks for the comment!
@GerardBarreto3 жыл бұрын
THanks for the Video, it was good. I am going to try that. I have my Predator for about 2 years now and from day one it was surging at idle & unless a lot of load is applied it just surges or hunts. I have tried vent the entire box, replaced the spark plug, replace the oil, replace with fresh if it sits too long and still doesn't run smooth. So I will try your fix & see what happens, thank you again.
@BeastFamilyADV3 жыл бұрын
I’m going to be coming out with an update video with some upgrades soon
@BeastFamilyADV3 жыл бұрын
Also, make sure you clean your spark arrester! My was clogged bad
@petermccool24512 жыл бұрын
Good info, thanks. My Norton Pgi3500 has been surging since new. I'm suspecting the seller used shitty gas when testing before shipping. I also bought an inline fuel filter that I will install.
@BeastFamilyADV2 жыл бұрын
Can’t go wrong with a fuel filter! I only use REC90 or no ethanol fuel.
@2NDLTUSMC15 күн бұрын
thanks. This just happened to me. Surging after a long period of not starting it up.
@FourFoot25 Жыл бұрын
Thanks for the video, in California there is a cap on the screw that prevents adjustment. It must be removed to fix the generator.
@BeastFamilyADV Жыл бұрын
Interesting, thanks for the info!
@willwillis23812 жыл бұрын
Perfect explanation. Works like a champ. Go elk dudes! All good, thanks.
@danjamison1327 Жыл бұрын
15F today and Predator 3500 decided to act up and die while charging batteries for the house. Between video, rounding up tools and moving generator to a better location to perform repairs (snow/gravel not a good place to loose parts)…took about 2 hours. I didn’t find anything visible in the plastic pieces, still sprayed a little carb cleaner inside the carb. It was still acting up. I looked into the tank and the fill screen filter had also dropped into bottom of tank and was covering up the pickup inside the tank. So it was starving for gas too. Thanks for sharing!
@MrSmith-nu7qf10 ай бұрын
Great video...very informative...& thank you for leaving the " error" in the video it helps us know what to expect.
@jcbassfishingchannel10 ай бұрын
Thanks for this tip. I have been working on my predator and was not sure how to get that adjusted. Will be doing that for sure. Great video!
@markgoldfarb485 Жыл бұрын
Miracle...it worked....please tell people when cleaning the jet the needle does not go all the way thru your just cleaning out the brass piece....thought it went thru to the opening in the middle of the screw
@BeastFamilyADV Жыл бұрын
Thanks for the comment and info!
@michaelhazen74102 жыл бұрын
Just went out and cleaned the jet and it is back purring like a kitten although putting the idle screw back in was a PITA. Never the less after I got it back in and set the idle speed was extremely happy with the way it is running.
@BeastFamilyADV2 жыл бұрын
I’m glad to hear it! I also put in a “hotter” plug and it seems to help. Went from a BPR7 to a 6. Seems to helps out. Also, others have stated that they are re-jetting the carb to run leaner.
@stewstephenson6236 Жыл бұрын
Very clear and concise. Thank you!
@clawzish9 ай бұрын
Thank you brother. Exactly the problem I had. Exactly the solution I needed Exactly the problem fixed. You da man !
@BeastFamilyADV9 ай бұрын
Glad to hear it! I’m happy that so many people were helped with my vid.
@bigbirdexplores19192 ай бұрын
That ideal screw is only supposed to have 2 threads coming out the other side is only there to keep the pilot jet in. Throttle is controlled by the solenoid.
@BeastFamilyADV2 ай бұрын
Thanks for the info
@peterproehl29808 ай бұрын
Great job... you explained the issue great ... Keep going. I'll be following you
@BeastFamilyADV8 ай бұрын
Hey! I appreciate !
@chasedttn2 Жыл бұрын
Thanks!!!!! you just saved me from freezing to death in Kentucky!
@BeastFamilyADV Жыл бұрын
oh wow!!!! Im glad to help! Stay warm!
@jamesmason71243 жыл бұрын
Great job keep up the good work and please stay safe so you can keep us safe
@BeastFamilyADV3 жыл бұрын
Thank you! And I will
@leecummings69122 жыл бұрын
Thank you, My predator is now purring like a kitten.
@BeastFamilyADV2 жыл бұрын
Glad to hear it!
@geraldjefferson73062 жыл бұрын
I am about to get a predator generator. The video was informative ...
@BeastFamilyADV2 жыл бұрын
You won’t be disappointed for the money
@geraldjefferson73062 жыл бұрын
@@BeastFamilyADV the predator 3500 is very nice, but it is a little heavy, so the 2000 maybe the one for me .
@BeastFamilyADV2 жыл бұрын
@@geraldjefferson7306 yea, the 3500 does have some weight but the 2000 is extremely nice too! I have several friends with it
@richardhitt63253 жыл бұрын
Thanks, gonna try that. Some say, the spark arrestor could be plugged as well. I'm also switching the fuel to ethanol free.
@BeastFamilyADV3 жыл бұрын
yes, if possible, always run ethanol free. These carbs are small and jets are even smaller so ethanol can easily clog these and cause issues.
@dwmcever Жыл бұрын
You have to clean the idle and main jets in the carb . There is no shortcut. It's a short coming of all carburetor engines. You can pop the fuel bowl off and spray up thru the main jet, but the best way is to pop the carb off. I start my 3500 every 2 weeks for 15 minutes. Or drain the fuel from the carb. Fuel stabilizer is a must.
@BeastFamilyADV Жыл бұрын
That is the best way to clean it but many people don’t have that level of skill to be honest. Thanks for you comment and the good information!
@jrm44082 жыл бұрын
I went through all this exactly and I had no luck. I got it so it would idle down and stay even until you put any kind of load on it and it's all over the place. Generator has very low hours and started this almost immediately after I got it (should have returned it..). Replaced the plug (old one looked fine), air filter is spotless. I even sprayed some light oil on the governor mechanism thinking it might be sticky. No luck. Love the generator but this drives me absolutely nuts and I don't really trust a shop to work on it - I paid one $80 and all they did was swish out the carb, no change. I don't think many places know how to work on these things.
@BeastFamilyADV2 жыл бұрын
Hmmmm, did you get the warranty? I would just swap it out for a different one. I also changed the plug. I went to generatorupgradesupply.com and bought one of their spark plugs ( different heat rating) and it runs better. Nonetheless, these generators notoriously run extremely rich, many people solve a lot of problems changing the jets in the carb to remove some fuel. However, if it is still under the harbor freight replacement warranty, I’d exchange it.
@henrycaldwell9605 Жыл бұрын
I love this Man.Thank you Sir!!It worked.
@BeastFamilyADV Жыл бұрын
Glad to hear it bud!
@PaulFE73 ай бұрын
Great advice. Gonna try this out tomorrow. Nice plug on the Instagram link
@BeastFamilyADV3 ай бұрын
Thanks!
@jameshalbirt58072 жыл бұрын
Cleaned her and started working again. Mixed results on the idle fix
@libby3412 Жыл бұрын
This is very helpful. Thanks!
@BeastFamilyADV Жыл бұрын
Glad it was helpful!
@tonyorlina83972 жыл бұрын
Thank you. Very informative
@BeastFamilyADV2 жыл бұрын
No prob! Thanks!
@trinityacandhtg55432 ай бұрын
Great description 👆👍
@billlavoie72723 жыл бұрын
Thanks fixed the problem.
@johnniles79399 ай бұрын
I bought a new machine with less then 1-hour on it at a estate sale. Had some gas in it, but had not been touched in about 18 months. When I looked at the machine, the switch on the right side was in the run position. What I have found out this controls the gas, choke and ignition. I charged the battery and got it to start, but it will not run in the RUN position, need to leave it in start position, which is the choke. So I drained all the gas, took the bowl of the bottom of the carb, got fresh 89 octane gas and added some Sea Foam to the gas. Still will not run in the RUN position. I was looking on here and saw your video and though it would give it a try. Thanks for the info, it was helpful, but it did not fix my problem. I'm wonder now if the problem is in the device that off, run start switch is attached to. Has to be starving for fuel.
@BeastFamilyADV9 ай бұрын
That’s a good possibility but I haven’t seen or heard of that one really failing or being the problem. Have you checked the spark arrestor? A friend of ours, while primitive camping with us, couldn’t get theirs to stay running. It would just die out, I checked the spark arrestor and it was completely clogged choking the engine out. We cleaned removed it and it fired right up and ran like a champ. We cleaned the spark arrestor by soaking it in gas and replaced it several hours later. They had no issues the rest of the weekend.
@BeastFamilyADV9 ай бұрын
These engines usually run rich and most of the times need to be leaned out. The Predator 5000 (which was just pulled from the shelves) actually came with several size jets for the carb to tune it depending on your location. This may be “safe” for the engine and keep it cool but fouls plugs and clogs any muffler or spark arrestor.
@johnniles79399 ай бұрын
I’m thinking of pulling the carb next and clean it.
@BeastFamilyADV9 ай бұрын
@@johnniles7939 if your pulling it out, I would change the jets and lean it out a bit more depending on your altitude to sea level. Here is FL, they run very rich.
@dansmusic45793 жыл бұрын
You bought a P-3500 for $699???? Lucky you! Today they want $899 for the same generator! I don't think their common 20% discount will apply to these, either! Mine runs about half RPM these days after being stored for about 8 months. I failed to put Stabil in the gas tank, and there was a bunch of little pepper grains (looks like pepper!) in the gas that I think clogged the lines, jets, carb, bowl, etc. I drained it all out and bought some 91 octane ($3.77 / gallon these days here in Las Vegas!) and will add stabil from now on. I hope that solves my problems. I wish they had a method to remove that stupid black plastic strap/frame thing that blocks access to the carburetor! I'm ready to CUT it at the top and bottom to remove it and re-attach with some aluminum straps for something! Now... "Mr. Garage" here on You tube, has a much longer video to explain how to swap the #76 jet with something like a #68, but... he shows a brass jet thing that he unscrews from the BOTTOM of the carburetor bowl along with the 'emulsion tube'. You found a plastic one from the top! Which one is really the jet? I need to clean them both out, but ... that stupid black plastic frame thing is in the way! Oh... I have that exact same Craftsman tool box set that you have, but I think i bought mine in 1976 and I see will need a nice skate-board with tiny model car on it to complete my workshop! Cape Coral Elks Lodge? Is that what I heard? I was ready to toss my P-3500 generator in my truck and ask you for help until I heard that! You're a LONG drive from Las Vegas!
@BeastFamilyADV3 жыл бұрын
Lmao yea just a little drive lmao yea I heard they went up in price! I forget the technical name for the plastic one I showed but usually the main jets are in the bottom / float. As I said, I’m no mechanic lmao just a guy that enjoys camping and found a solution to the generator I use lol.
@jamesmason71243 жыл бұрын
That’s the idle jet I have one of these generators and have researched and learned a lot about the Predator 3500 inverter generator and have done a few modifications such as the NGK bpr7eix iridium spark plug replace the carburetor main jet with a number 68 jet added a magnetic dipstick and removed the charcoal canister and hoses then capped off the two holes with vacuum caps these modifications I recommend but please never drill any holes in the case because this is a forced air cooling system and you will burn up the inverter FYI I’m from Las Vegas Nevada too but now live in Farmington New Mexico so please use a thicker oil in the summer months at least a 10w40
@BeastFamilyADV3 жыл бұрын
@@jamesmason7124 thanks for the info! So far how do you like it? Do you think it was worth the money?
@jamesmason71243 жыл бұрын
@@BeastFamilyADV I paid the full price of $849 and I love it I live in my 1967 GM city bus full time in the high desert of New Mexico and use my generator every day to stay alive so thank God for the stimulus checks or I might not be alive right now I really wish there will be a forth check so I can replace my door and some windows and my batteries keep up the good work and stay safe
@kevinconville92582 жыл бұрын
Thanks! Very useful
@chyna3203 жыл бұрын
Great video- thanks!
@BeastFamilyADV3 жыл бұрын
Glad you liked it!
@jimwilliams82292 жыл бұрын
Thank you for this video. I'll try it.
@BeastFamilyADV2 жыл бұрын
No prob! Good luck!
@jimwilliams82292 жыл бұрын
@@BeastFamilyADV I tried the procedure this morning. there seemed to be an obstruction but cant swear to it. the wire fit the hole snuggly anyway. put it back together, cleaned the spark arrestor, loosened the screw in the stem on the bowl and drained about a cup of gas out. starts fine with switch in start position and will run fine. when I switch to run it surges and shakes and will die if I pull the trigger on my belt sander. I repeated the process with same results. It has been a while since it was run, maybe 7-8 months, no problem then but only ran it for 2 hours. Your thoughts would be appreciated.
@BeastFamilyADV2 жыл бұрын
@@jimwilliams8229 it’s sounds like your carb is out of adjustment. Turn the screw on the side to the right until it’s in all the way. Then, back it out 2 full turns. This will get you somewhere in the ball park. Make sure “eco” is turned off. Start the engine, let it get to operating temp. Turn the screw back to the right until the engine RPM begins to increase by itself. Then, back it off until is settles to idle. If that doesn’t work, so the same but turn the screw to the left. Once you get the rpm to increase back the screw slowly until it goes back to idle. If the engine stalls or bogs, the screw is being turned the wrong way. After I did this, I turned eco on and fined tuned the adjustment. Hope this helps! Let me know if it does!
@timg29733 жыл бұрын
Mine serged all I did was spray gunk out in the carb by removing the drain plug for the fuel and spraying it in there. It's that simple and way easier
@BeastFamilyADV3 жыл бұрын
Thanks for the info! There are always two ways to skin a cat. As long as it works! It sounds like you had more of a float issue than mine.
@rob-pm7gb Жыл бұрын
Have had my 3500 for about 2 mos now and a week ago it started surging and shut off at 2 am lol. A friend got it going again a day or so later but he bored out the jet 400th bigger which I'm not sure if I was happy about but it seems to run a little rough, now that I've watched your video I wonder if he has the the idle set correctly. Makes sense.
@BeastFamilyADV Жыл бұрын
Interesting, I haven’t heard many people making it more rich. Usually, people have been leaning it out which helps prevent spark plug issues and clogging the spark arrestor. As the saying goes, lean is mean lmao. I would get a jet kit and re bet the carb so you know exactly what you have in there and tune it that way.
@cricri35345 ай бұрын
thank you so much for your guidance
@noti512 жыл бұрын
Thank you thought I was going to have to pull the carb
@BeastFamilyADV2 жыл бұрын
No, not yet lol. I have also change the spark plug and cleaned out the spark arrestor that was clogged. These seem to help too!
@davidstearswindowcleaningr26772 жыл бұрын
Great information
@MegaKB3333 жыл бұрын
Thanks for the vid
@clawzish9 ай бұрын
QUESTION...before doing any of this, if my generator is bone stock, would it be wise to count the number of turns for my idle screw turn if I screwed it in all the way so I'd know how many turns to back it out ? Good luck with your fund raising. Also, you might want to invest in a tripod so you don't have to display those fancy one handed skills...lol
@BeastFamilyADV9 ай бұрын
Lmao I do have a tripod, just too lazy to set it up lmao. That is a good idea either way the idle screw to make sure you set it back correctly.
@badluk13 жыл бұрын
Idle screw is the famous SOFT black plastic !!!! While reinstalling I messed up the threads (forced in) Jet clogged but also need to dump the old fuel from carburetor
@BeastFamilyADV3 жыл бұрын
Thanks for the info! Sux that you messed up the threads but it can’t be that expensive to replace
@badluk13 жыл бұрын
Problem is nobody carries Predator parts
@waylandLindale3 жыл бұрын
Harbor Freight sells generator parts.
@mistyseemann11 ай бұрын
Mine only does this when I have my espresso machine plugged in. And it's only 1600 watts! Will this help??
@BeastFamilyADV11 ай бұрын
Hmmm, I’m sure it can’t help. That espresso machine is well within its power range. Just posted a video of me powering my 30 amp trailer pumping more than 25 amps and more than 3,000 watts. So I would give this a try and see if it works. For me, this always seemed to happen at 2 am after drinking in south Florida. So I had to keep getting up to re start it for the a/c lol uggghh so glad I don’t have to deal with it anymore. Plus, I plan on getting the 5,000 and testing that out.
@curtisellis97645 ай бұрын
Turn the screw all the way in before removing it and count the turns then you will know where it needs to be when you reinstall it.
@BeastFamilyADV5 ай бұрын
Good advice
@dannytran89963 жыл бұрын
Thanks for the video, Great learning experience for my self and others.
@BeastFamilyADV3 жыл бұрын
Glad you enjoyed it
@alsilva66722 жыл бұрын
Awesome ThankYou !!!
@BeastFamilyADV2 жыл бұрын
Anytime!
@calebturnbow1538 Жыл бұрын
Question, my 3500 predator is running fine until the camper AC cuts on then after 10 minutes or so, the generator overloads. Start it back up it runs fine plug the camper back in it’s fine then the AC does it again. Problem is, it should be running the single AC unit no problem. Is this similar to what you’re talking about yours doing?
@BeastFamilyADV Жыл бұрын
How many BTUs is your A/C unit? It sounds like your A/C is drawing too many Amps. The 3500 can only handle 20 amps.
@EricHalabura3 жыл бұрын
Nicely done!
@BeastFamilyADV3 жыл бұрын
Thanks!
@tjlayes8199 Жыл бұрын
Good info. Thanks. I just bought my brand new predator 3500 for my heat press machine 1500 watts. I sell T-shirts for festivals n shows. It runs great but once I get closer to the temperature I need for the machine it idols really high n the motor starts shaking. Do u think that’s my problem? IdolIng issue?
@BeastFamilyADV Жыл бұрын
Thanks for the comment! To answer your question, i would first find how many watts and amps your pulling when the machine gets to the temperature you need. Remember, the generator has a limit of 20amps. When your reach long max output of the generator, the rpms will be high and may result in “shaking”.
@tjlayes8199 Жыл бұрын
Ok thanks
@68pishta682 жыл бұрын
can you just stick a pin in there while the jet is still set in the motor, any room for this? I'd mark the idle screw and count the turns to tighten to a light set then back it out all the way if you end up taking it out then you have a reference point: screw the jet all the way in to a light set then back it out the couned turns, like the 1.5 of a Holley carb.
@BeastFamilyADV2 жыл бұрын
No there’s not room, you have to pull it completely out. That’s a good idea about the idle screw, it will give you some idea of where to set it during reassemble. Since these things come from China and prolly sent all over the world, they have a general setting. I adjusted mine to my liking for south Florida weather. Obviously jetting it would make a bigger difference and I’ve seen other people on KZbin change the jets out.
@mrgreenbudz37 Жыл бұрын
I love my 3500 and have had it for about 4 plus years so far. I am having a problem right now with mine. When I go to turn it off it keeps wanting to run and chug and like it's dying but just won't shut off. Any advice?
@BeastFamilyADV Жыл бұрын
Hmmmm, that’s the first time I heard about this issue. Might be an issue with the carb or the choke. Anyone else run into this issue? I know we got a bunch of Predator owners here
@mrgreenbudz37 Жыл бұрын
@@BeastFamilyADV I was just checking out the carburetor, and seems like the choke cable has undue slop in it. I wonder if could that be causing the issue? Gonna try pulling the carb tomorrow and clean it.
@BeastFamilyADV Жыл бұрын
@@mrgreenbudz37 a clean carb is always good. I don’t know if the loose choke cable is the issue though. It sounds like the machine is not properly turning off ignition and or allowing too much fuel (once turned off) to enter the combustion chamber. I’m sure it has something to do with the black dial for the on / choke switch. Something behind it must be off or out of adjustment some how. Just curious, how is your spark arrestor in your exhaust? I know these cause various issues if not properly cleaned. I’m in the process of cleaning my for this weekend. They get dirty and clogged quickly.
@patrickbrown56702 жыл бұрын
Good day why predator 3500 spark plug no spark
@marialove3275Ай бұрын
Wondering why it says overload and cuts off please help
@BeastFamilyADVАй бұрын
I noticed that too when mine was doing it. I believe it’s having trouble throttling up to compensate for any amount of load.
@goatgardnersbbq9013 Жыл бұрын
Are you suppose to be able to push needle all the way in
@BeastFamilyADV Жыл бұрын
Ummm I mean I shouldn’t be flush if that’s what your askin g
@gigatransport93946 ай бұрын
Good video
@Acordionista5093 жыл бұрын
Mine is a week old and when I set it to start it turns on... but soon as I switch it to "run" says overload and it dies . Even though nothing is connected to it. It only runs if I leave it on start and just slightly turn left towards run. .what could be the issue ?
@BeastFamilyADV3 жыл бұрын
I am not a mechanic but it sounds like a bigger issue than mine. Id refer to a trained mechanic or some of the other commenters who obviously know more than me lol
@SkinnySkinch3 жыл бұрын
You are supposed to leave it on "start" until the blinking green light turns solid green, and as soon as you see it turn solid green then switch it to "run." If that doesn't fix it I would also remove the spark arrestor and see if it somehow got clogged with carbon yet. It's slightly possible you fouled your spark plug already too. The stock spark plug is a POS. Buy yourself a BRP6ES or similar spark plug.
@BeastFamilyADV3 жыл бұрын
Thanks for the info!
@eyubmusayev9223 жыл бұрын
I have the same problem. InsaAllah gonna return it tomorrow:) this is the 2 time I’m gonna exchange it 🤦🏻♂️🤦🏻♂️ Can not running with 10 gallon air compressor, it says overload
@ronballard49102 жыл бұрын
Does the needle need to clear a hole. Tried sucking and blow. No flow either way. ?
@BeastFamilyADV2 жыл бұрын
I would suggest to clear the hole and use a needle or pin. It is a extremely small hole and just sucking or blowing prolly won’t do it.
@lukehartmanfunchannel53462 жыл бұрын
Question, when I'm hooked up to the camper should you turn the eco throttle off? Or do you always leave it on when hooked up. Thanks for the video. Mines been surging for a while. Going to try this.
@BeastFamilyADV2 жыл бұрын
So, I tend to always leave the Eco on. Another thing I do is to keep the cap to the gas tank loose, especially during extended run times and temperature changes. If the cap malfunctions and does allow venting, the tank may create a vacuum and starve the engine from fuel (since it’s gravity fed). One more thing is make sure there is sufficient venting underneath the generator. I noticed during beach camping, the wheels sunk into the sand and the generator rested on the bottom of the unit. When I got home, there was a lot of sand inside the unit.
@sstrongman1667 Жыл бұрын
@@BeastFamilyADV, this comment literally saved my night. We are day 3 of a power outage and haven’t had any issues. About an hour ago I topped the tank off for the night and 5 minutes later it started loping on me. Watched 3 videos, but just didn’t think it was a carburetor due to the timing and the fact that it had been running fine. I had screwed the cap on tight. Backed off half of a turn and we are back in business. Thank you!!!!!
@BeastFamilyADV Жыл бұрын
@@sstrongman1667 thanks for the comment!glad it worked out for ya! I also noticed sometimes if you have the generator running and you lift one end or like push the to a new location it may begin to surge too. It may be from the sloshing of the gas back and forth in the tank allowing air into the fuel line. I had to turn off the unit wait a few minutes and crank it back up. Than it was fine.
@friend4ua7242 жыл бұрын
I just bought this generator. The first time I started it with the eco turned off I let it run for a while and then turned the eco on and it started surging. This was right out of the box. What's up with that?
@BeastFamilyADV2 жыл бұрын
I’m not sure, I’m no generator mechanic lol however, it’s not beyond reason that the carb can get clogged by the packaging. Make sure the spark arrestor is clear from obstruction too. I also only use REC 90 (non-ethanol). Nonetheless, since your within the warranty period, I would just exchange it. I’m sure this Chinese stuff doesn’t have the greatest quality control. Nonetheless, I have more than 400 hrs on mine and still love it. I’ve had people reach out to me approaching 1,600 hrs who still love them too!
@mamasram3 жыл бұрын
Your rack did you buy that or did it come on your trailer already that looks perfect for the generator
@BeastFamilyADV2 жыл бұрын
The rack came with the trailer. It’s part of the black out edition.
@JasonCatlin-zw7yt3 ай бұрын
if ya poke too big of a hole in the jet can u easily find a replacement one?
@BeastFamilyADV3 ай бұрын
Hmmmm, not too sure. Carburetors aren’t too expensive
@DC-ho8oe3 жыл бұрын
A little Marvel Mystery Oil or Seafoam added to the gas would stop that. Using non ethanol gas helps too. Just saying.
@BeastFamilyADV3 жыл бұрын
I don’t use anything other than non-ethanol
@DC-ho8oe3 жыл бұрын
In a pinch ethanolated gas will work but yeah non ethanol works great. Had a Chevy C-10 with a carb'd 262 (4.3 L) every now and then I would have to dump in some MMO or SF and she was back to running like a dream.
@BeastFamilyADV3 жыл бұрын
@@DC-ho8oe thanks for the info!
@owenminor3 жыл бұрын
Get a cheap brass "toothbrush" at HarborFreight and pull out one hair of brass. Use that to poke through the jet to not tear up the jet.
@BeastFamilyADV3 жыл бұрын
Good idea! thanks for the info!
@thercrv82023 жыл бұрын
Lol. A microwave doesn't "heat up" Anyway, I got over 8,000 hours on one of 2 of my P3500 I.G.'s. It will surge when the oil gets low or the air filter is dirty.......it sits in the Arizona desert most of the time and 120 degree days don't phase it at all. I've never gone thru the effort you have. After 8 thousand hours it should be all worn out. The issue now is the electronic speed control has seemingly lost the ability to regulate to the energy save rpm and runs like the economy switch is off. I look forward to taking it apart and checking into a rebuild, for grins n giggles.
@BeastFamilyADV3 жыл бұрын
Holy Crap! 8,000 hrs!!!!!! that's gotta be a record! Good to know that it will last that long! I will def check the oil level (due to change it anyways). I will also replace the filter, hopefully that keeps it from surging. The only reason I did what I did was because I saw another video on it and it worked for them. So, I figured i'd try.
@thercrv82023 жыл бұрын
@@BeastFamilyADV I'm impressed as well. I put it thru hell, being a full time RV'er that immensely dislikes the greed behind $50 plus a night for a park I'm pretty much required to run 'em a lot or die of heat stroke. I never changed the air filter, just washed it out with a bit of gas and kept going. This thing even fell off a bumper rack when i was changing parking spots and the frame broke at one handle, which I repaired with a propane torch and alumaweld rods. It of course looks like it is a work horse. For a Harbor Freight product it is amazingly well built. Even more interesting by comparison is my onboard 4kv blew a head gasket at a bit over 5,000 hrs.
@BeastFamilyADV3 жыл бұрын
@@thercrv8202 wow! Yea I bet! I’m glad it’s working out for you though! I have sold these things to so many people including a Honda Mechanic! Lmao
@thercrv82023 жыл бұрын
@@BeastFamilyADV Hahahaha, yeah man, even Honda can't compete.
@thetravelingbuenos71392 жыл бұрын
I have the same generator. when I hook up my travel trailer with 3,500 A/C and turn A/C on, the fan runs then the generator overloads and idles high when compressor tries to turn on. then runs normal and just runs fan, then a minute later same thing. could this be the problem?
@BeastFamilyADV2 жыл бұрын
It really depends on the Power needs of your A/C. I found that if the A/c requires too much initial draw, the fan will only run and won’t cool
@wam74842 ай бұрын
Any truth to the rumor that California forces a too-lean pilot jetting to get CARB approval? Mine has always surged and cleaning the carb did nothing. I've been living with it for years.
@BeastFamilyADV2 ай бұрын
Now I know some people have been rejeting the carb to lean it out for better efficiency. But as far as California requiring a too-lean situation? Lol it wouldn’t put it past me with California lol however, I have not heard anything about it
@Todd_S3 жыл бұрын
BTW, that is not the jet. The jet is inside the float bowl and it is brass with a number on it like 76.
@BeastFamilyADV3 жыл бұрын
Yea yea I kno lol It’s like a jet thing ma gig lol
@jrcll78563 жыл бұрын
dirt in jet = dirt in the gas... use a automotive paint strainer or a pair of panty hose over the fill tank
@BeastFamilyADV3 жыл бұрын
It’s crazy, I don’t have any problems with any other generator or lawn equipment lol but I will def try that!
@richardthornton7455 Жыл бұрын
Why do you have to remove the idle screw?
@BeastFamilyADV Жыл бұрын
If I remember correctly, you have to remove it to get the other one out.
@oliverlopez58932 жыл бұрын
So I totally broke the idle screw where do I get a new one
@BeastFamilyADV2 жыл бұрын
Oh wow, honestly your the first person I know that did that! Lol you may want to call Harbor freight to see if you can get a replacement, they may only sell you the whole carb. You can also get in touch with Generatorupgradesupply.com, I have bought several things from them and they always come with a personalized note/letter thanking you for your business. I would check with them to see what they say.
@Leighdavies-xk6ql11 ай бұрын
@@BeastFamilyADV so my husband did the exact same thing and broke the screw! Any luck on a replacement for it?
@Leighdavies-xk6ql11 ай бұрын
What did you do to fix it? Husband did the same thing
@BeastFamilyADV11 ай бұрын
@@Leighdavies-xk6ql eeek, I’m not sure, I’d check with harbor freight first. They may make you buy a new carburetor
@fifthwheeloffthegrid62563 жыл бұрын
Thank
@fifthwheeloffthegrid62563 жыл бұрын
Thank you!
@BeastFamilyADV3 жыл бұрын
You're welcome!
@AF-pc5xe2 жыл бұрын
I have a pizza trailer I ran a upright cooler chest freezer led lights and exhaust fan after about 3 hours it shut off and said overload first time this happened I may have about 18 hours on it!! What do you think it is? Do you have an email I can communicate with you? Thanks!
@ellobo1326 Жыл бұрын
Great video. Thanks
@jamespruett28493 жыл бұрын
Great video I cheated tho I put about half an ounce of seafoam in mine
@BeastFamilyADV3 жыл бұрын
Lol that’s one way of doing it! I’m glad it worked!
@tmmprorental3 жыл бұрын
Mine was fine for 1 week. Then My AMP demand went past 14AMPs and the the genie coughs and dies off. Could that be the issue...I am okay running at 3-5 AMPS...Pls advise Thank you
@BeastFamilyADV3 жыл бұрын
These things are rated for 20 amps so unless your doing more than that it shouldn't be cutting off. I wonder if when you draw more power and it revs up that its either getting choked out or not enough fuel that is causing it to die out. If your mechanically savvy, clean the carbonator jets in the float and make sure that the air filter is not clogged.
@thercrv82023 жыл бұрын
Can't over emphasise the importance of keeping the spark arrestor basket clean. If it guns up fast turn your mixture screw it to reduce fuel flow and thus carbon build up.
@BeastFamilyADV3 жыл бұрын
YESSSSSS!!!! OMG!!!! I just checked mine since I saw a couple comments including your about it. WOW, mine was all gunked up. I pulled it off and carbon just fell out onto the floor. A little warm soapy water and all clean again. All predator owners should do this. Mine was pretty much clogged.
@juanrubio41722 жыл бұрын
How did you get that price ?
@BeastFamilyADV2 жыл бұрын
Are you referring to the price I paid for the whole unit? I bought it several years ago now. They have since “updated” it and increased the price. From what I can see, they added a fuel gauge on top of the generator (which is nice) but not for the money increase. I’d still buy it even at this price. I have been thinking about getting the 9500 for my house.
@hdrvman Жыл бұрын
No fuel gauge ???
@BeastFamilyADV Жыл бұрын
No, not on the old model. The new one they are selling has them.
@hdrvman Жыл бұрын
@@BeastFamilyADV Ok...I'm a little confused on all of the different versions that they seem to have! I just purchased one with the battery tray on the right and oil fill opposite the recoil start with gauge.
@BeastFamilyADV Жыл бұрын
@@hdrvman yea for some reason they have several different versions. Some have the locking wheel on the left side while others on the right side. I haven’t heard anyone saying one is better than the other but if you go to generatorupgradesupply.com some upgrade kits are model specific so you have to be careful when ordering upgrades. Other than that, it don’t make any difference.
@hdrvman Жыл бұрын
@@BeastFamilyADV Ok...thank you for the clarification. Happy New Year !
@BeastFamilyADV Жыл бұрын
@@hdrvman thank you! Happy New Year!!!
@dougharlow60373 жыл бұрын
I have spent a fortune trying to keep my generator running smooth and it only has 17 hrs. I think the best thing to do is go propane
@BeastFamilyADV3 жыл бұрын
Generatorupgradesupply.com has some cool upgrades including a propane conversion and big tire kit for the Predator 3500. I have thought about it but just don't know about the out put yet. Normally, you lose maximum output when you switch over to propane.
@dougharlow60373 жыл бұрын
@@BeastFamilyADV What I've seen on KZbin it's only about 100 watts, never plugs the jets, fuel storage last forever, no more fuel additives, no smell etc etc, which is nothing compared to all the money and work you have to do to keep this Harbor Freight Predator 3500 running and RELIEABLE.
@BeastFamilyADV3 жыл бұрын
@@dougharlow6037 oh wow! That’s not bad! Since cleaning the carb “air jet” thing a ma jig lol I have had no issues. Maybe one day I’ll do the propane conversion to simplify things while primitive camping.
@dougharlow60373 жыл бұрын
@@BeastFamilyADV how often do you use your generator?
@BeastFamilyADV3 жыл бұрын
@@dougharlow6037 ehhh not often, I do make sure to start it and let it run atleast once a month. I also only use REC90 or non-ethanol gas.
@user-qb3ni6bk1d6 ай бұрын
Should have went ahead and spent the money for the Honda
@BeastFamilyADV6 ай бұрын
Lmao could buy like 4 of these for the price of 1 Honda
@user-qb3ni6bk1d6 ай бұрын
I know right since I have been off grid for about 6 years now I have been using the predator products and with their warranty I have been having to replace my 3500 every 6 months due too bad carburetors bad blown or split oil seals bad sine wave capacitors oh and let's not forget the dreaded faulty oxygen sensor that you have to bypass so that the thing will run instead of stalling out on you about every hour on the hour cheap Chinese products I guess would be okay if your generator just sits in the corner until needed but for everyday use these generators are junk good luck with your generator I hope that it will last you a long time ✝️
@BeastFamilyADV6 ай бұрын
wow, honestly havent heard about that many issues! Ive spoken to some subscribers that are full timers have have well over 1,000 hrs on theirs with no issues! I guess the bigger problem may be consistency with build quality. @@user-qb3ni6bk1d
@PLLuxuryReviews3 жыл бұрын
How is the Predator holding up
@BeastFamilyADV3 жыл бұрын
So far so good! No more issues. Have give or take 400 hrs on it and it’s been on the beach and in the dirt. More than enough power for anything I throw at it during camping. Pretty happy with it for the cost.
@PLLuxuryReviews3 жыл бұрын
@@BeastFamilyADV My Machine starts sometimes . I have to turn it to start take gas cap off then it starts . Then when I’m doing a detail for about a hour the overload light comes on . I plug one item at a time . I never run more than one I only have 7 hours on the unit . I changed the Oil ETC. I have no warranty so I’m going to buy another brand and figure out what to do with this Predator Is so unreliable is very nerve-racking and unprofessional when you have to ask the customer to use their power and you have a brand new generator
@BeastFamilyADV3 жыл бұрын
Hmmmmm, that’s weird! I have seen other channels where they have well over 1,000 hrs on theirs with no problems. As far as the gas cap, sounds like there is an issue with a ventilation line. It’s gravity fed so if the tank is sealed, it may create suction and not allow the gas to flow. Have you contacted customer service about it? You can do the famous, buy a new one, bring it home, then return the broken one! They probably won’t know the difference since yours is brand new
@PLLuxuryReviews3 жыл бұрын
@@BeastFamilyADV Thank you I’m just telling the facts that’s all
@BeastFamilyADV3 жыл бұрын
lol it’s all good! I appreciate the info! I heard WEN is really good for the price! Some aspects even beat the Predator
@philhall56092 жыл бұрын
Ethanol free gas then no broblem. Learn how to use a camera. Use wire or drill bit that is not tapered. At least you found one of the problems that can cause the surging. Just not the root couse.
@BeastFamilyADV2 жыл бұрын
You may want to watch more of the videos, I said I only use ethanol free. This generator hasn’t seen anything else in it’s 400 hrs of run time. I have done more upgrades too including hotter spark plug which seems to help and other people have stated they even leaned it out with changing the main jet.
@Michaelcarbonter2 жыл бұрын
This looks like cape coral lol
@BeastFamilyADV2 жыл бұрын
Lol SWFL living
@vstabill363 жыл бұрын
Is that the air jet? Pilot jet? I know it isn't the main jet. Thinking air jet. That hose is a ventilation hose not a vacuum line.
@richt82973 жыл бұрын
Low speed jet. High speed is in the float bowl. You need to take the carb off to access it.
@BeastFamilyADV3 жыл бұрын
Bill what Rich said lol he sounds like he is more familiar with terminology than I am lol
@kaseycasece13403 жыл бұрын
EVERY OTHER TANK OF FUEL USE STA - BIL OR MARVEL MYSTER OIL TREAMENT WILL CLEAN EVERY THING TOO ! .
@BeastFamilyADV3 жыл бұрын
I usually run this thing for more than 30 minutes every month and I still seem to find a surge here and there lol