Preping your 3900 for painting #3

[@michaelgasperik4319]

Your videos on the 3900 seem to have the most detailed information. Thank you! I'm about to "test run" a brand new 3900 to get a feel for it and try to make a couple straight lines. I'll be striping my first parking lot tonight. Wish me luck, I'll probably need it, lol.

[@marlonxander3559]

you probably dont care but does anyone know of a method to log back into an Instagram account?? I somehow forgot my password. I would love any tips you can give me!

[@pauledison6958]

@Marlon Xander instablaster :)

[@marlonxander3559]

@Paul Edison Thanks so much for your reply. I got to the site through google and I'm in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@marlonxander3559]

@Paul Edison it did the trick and I finally got access to my account again. I am so happy:D Thanks so much, you really help me out!

[@pauledison6958]

@Marlon Xander you are welcome :D

[@akashskyrastogi76]

Very very thankful to you for giving me this description of the machine. please sir we can not heard you properly so please it's a request to speak loud that we can hear about the machine. Because we can heard the voice of motor and can't understand what you were telling about the machine.

[@AmateurStacker1776]

Dude! Take the tip and tip guard off to cycle the paint through the machine and never spray into a bucket like that, you seen first hand what happens. Also, your packings on your pump are bad and need to be replaced and lastly, you dont need to pop that black gasket up to add TSL. Just apply it directly to the piston and let it run down into the packings. Good job telling your "apprentice" not to put his fingers in there, valuable lesson for a new guy...

[@JosephConcolino]

Does that info for the oil apply to a 3400

[@AmateurStacker1776]

Yes. I'll answer since nobody else did.

[@calebortega9384]

Great Info!

[@marvinjackson2641]

"TSL" is a mnemonic for throat seal liquid.... And, turn your pump down you do not have to run it at full rpm to apply the said liquid.

[@davidpeters3846]

You may have good intentions but you really don't know what you're doing that paint lid is half an inch or an inch in the air by the time you spray on asphalt you will have a four and a half line or bigger

[@silver2944]

The machine needs new throat seals way too much paint on the shaft what is the point of throat seal if you wipe it back off 🤣

[@robslinemarking2109]

Hi,what tip do you use ?cheers

[@Twisted694]

I'm a parking lot striper and I like to use the yellow 319 tip.

[@AmateurStacker1776]

​@Twisted694 good advice. 323's dish out too much paint unless you are on a rider and are cruisin.

[@Raul54057]

jajajajajaajajaja estaba esperando a que te chispeara la caraa jjajajaajajaja

[@BloomSmile]

The Guy recording needs to get a better focus