Prescott hill climb vscc sun 6th august + 10k subscriber giveaway

Thanks Simon for a fantastic day out!!!
And thank you all that have subscribed to the channel!  please don’t forget to comment I’m being with a chance to win the Ford Mustang Lego technic set.
I wanted to do something different for this video, so I thought I’d take the opportunity to film a day out at Prescott Hill climb. I got to meet and chat Brian from oak swamp and spent the day with Simon from SW creations. Please can you give them both a follow 👍
/ @swcreations
/ @oakswamp
Once again, thank you, everyone for your continued support 👨‍🏭

[@OutOfOrderGarage]

Congrats on 10k+ 👍

[@55poncho]

Congratulations and well deserved on the subs. Its always a good day when you post a new video, so informative, all the best in your future endeavours.

[@Metal_shaper_tom]

Cheers mate. Loads of metalwork coming soon!

[@russellnixon9981]

Looks like a fab day out. so many amazing cars, Looking forward to what you come up with.

[@kevinford6420]

Stunning works of art.Congrats on 10k subscribers 👍

[@Metal_shaper_tom]

There definitely was! Thanks

[@petereames3423]

Hi Tom, it was great to see all the cars and it will be good to see more metal work you do a great job and I lean a lot thank you for your time.

[@Metal_shaper_tom]

Hi Peter load of metal work coming soon!

[@MalJ-eb7nv]

Some fabulous cars there. Thankyou for showing them on youtube

[@Metal_shaper_tom]

My pleasure 👍

[@DGRetroCustoms]

congrats on the 10k subs, that looked like a good day out with some awesome cars

[@Metal_shaper_tom]

Cheers Danny . Thanks for your advice along the way. It’s always good to chat to you about KZbin and hear your thoughts and opinions on it all.

[@DGRetroCustoms]

@@Metal_shaper_tom you are more than welcome my friend although I shoild be asking you for advice cause your smashing me lol

[@Metal_shaper_tom]

@@DGRetroCustoms lol I’ve just had a bit of luck on my side when it comes to the whole KZbin thing

[@DGRetroCustoms]

@@Metal_shaper_tom its not luck with your skill set mate

[@larrycluness5438]

A fantastic day out, wonderful to see these old cars getting used properly. Some lovely sheetmetal/aluminium work there for ideas and inspiration too!

[@Metal_shaper_tom]

Absolutely. Can’t wait to make my aluminium body now!

[@bobg9873]

Congratulations Tom! People know quality when they see it. Cheers! Bob

[@Metal_shaper_tom]

Thanks bob 👍

[@leslieaustin151]

Really nice video. Nice metalwork on display too! Thanks, and congrats on 10k. Les

[@Metal_shaper_tom]

Thanks les 👍

[@hermanhandlebars2687]

Congratulations on the 10k, always look forward to your videos popping up. Cheers 🍻 👍

[@Metal_shaper_tom]

Thank you! 👍

[@TheCreativeSpark825]

Prescott Hill Climb and a giveaway? This is going to be an epic Sunday!

[@Metal_shaper_tom]

Lol 😂 indeed it was!

[@ClassicMiniMotoring]

Congratulations on your 10k subs. Keep the good work coming. I always enjoy your metal shaping and tool making content 👌

[@Metal_shaper_tom]

Thank you 👨‍🏭

[@fanova948]

Just discovered your video on the Porsche 911 TIG weld bodywork. You deserve much more views on your videos. Congrats to 10k subs and if you ever come around to do another bodywork video it would be amazing, just watching your way of doing the job professionally. 👍

[@Metal_shaper_tom]

Thank you . I really like that video and always thought it underperformed. Hopefully I get to do one soon

[@alexmutimer3691]

Really good to see cars up close, fantastic.

[@Metal_shaper_tom]

Absolutely highly recommend!

[@rustysparks8645]

Great day out at Prescott - shame about the changeable weather. Great idea with the giveaway. Looking forward to progress on your Austin 7 project. 👍👍

[@Metal_shaper_tom]

Thank you . The next video will be out soon. In episode 3 I start mocking up the body design.

[@MrRobster1234]

Love the paddock and parking lot footage. Thanks for posting!

[@Metal_shaper_tom]

It’s so good that you can get up so close to them . Great day out!

[@oakswamp]

blimey you got there early mush!!! real nice to finally meet ...keep up the great work dude!

[@Metal_shaper_tom]

I was first in the car park at 7.45! 😂 head gasket went on my car but as soon as I can get something sorted I’ll try and arrange to come and see you. It was great to bump into you on such a cool day out.

[@oakswamp]

@@Metal_shaper_tom look forward dude

[@grahaminaus]

Great video! what a variety of cars, I watch Oak Swamp too! Looking forward to A7 progress, thanks and well done with 10K subs!

[@Metal_shaper_tom]

Thank you 👨‍🏭

[@plainnpretty]

Congratulations on 10K subs. Cool cars thanks for showing them. It’s nice seeing them being used

[@60Imperial]

What an amazing turn out of cars and congrats on hitting 10k, awesome stuff.

[@Metal_shaper_tom]

Thank you 👨‍🏭

[@Joe.Doucette]

Hi Tom. Congrats on 10 + k! Cool video, watching those machines scream along. There is nothing like that in my part of the world. Have a good one.

[@Metal_shaper_tom]

Thanks joe. Thanks for the continued support 👍 very lucky to have this on my doorstep

[@stephenmarples9873]

Great videos and congratulations on your 12k subscribers.

[@65cj55]

Looks like a good day out., congrats on 10k.

[@Metal_shaper_tom]

Thank you 👍

[@Simplyadriana]

The thrill of the Hill Climb combined with the excitement of the giveaway - what a day

[@Metal_shaper_tom]

Absolutely 👨‍🏭

[@russellhague7232]

Great video and a nice alternative giveaway 👍👍

[@Metal_shaper_tom]

Thanks Russell 👍

[@TheJameswort]

Cool set of cars there, thanks for taking us, Tom.

[@Metal_shaper_tom]

Glad you enjoyed it James

[@MattBaker-ww3lt]

Hey Tom, great video from Prescott and a great competition!

[@Metal_shaper_tom]

Thanks Matt 👍

[@warrencole2974]

Always a great watch👍

[@davidworthington-vs7te]

Congrats on reaching 10k subs, as a fan of Austin 7 specials, was good to see some in the video.

[@Metal_shaper_tom]

Thanks stay tuned as in episode 3 I share the body design

[@paulwhite7475]

I only subscribed yesterday after seeing you on oakswamp . Looking forward to your 7 special ... And my new lego set 😂

[@Metal_shaper_tom]

🤣 thanks 👍

[@paulfisher1160]

Another great video and great work. Good to see all these cars and ideas. Enjoying the Austin 7 build. Love the car. Good luck to the winner and im sure a hammer would have been well received. Keep up the good work and love to share some ideas. Regards from South Africa Paul

[@Metal_shaper_tom]

Hey Paul thanks for the great comment. 👨‍🏭

[@The_Cotswold_Engineer]

Hi Tom. What a brilliant day out. I spotted you in the paddock but didn't get a chance to say hello. It was my birthday treat, a day out inhaling Castrol R and tyre smoke!

[@Metal_shaper_tom]

It was fantastic! Great birthday treat and the weather nearly held off for a perfect day. The smells were brilliant weren’t they!!

[@The_Cotswold_Engineer]

@@Metal_shaper_tom hard to beat the smells of tyre smoke and Castrol R. A heady mix. Just made me even more determined to get myself something pre war. A Riley 9 chassis would tick most of the boxes......!!

[@markwarne893]

Great video of some fantastic cars

[@reganlittlewood]

It's nice to see a lot of these vintage cars being used competitively rather than just taken too and from shows, while being polished in between. And congratulations on reaching 10k! :D

[@Metal_shaper_tom]

Thanks . Yeah these drives don’t care about the value they just love to race

[@gregandroly9129]

Couldn't get there this year but hope to make the long course event. Like the channel.... I've got plenty to catch up with!!

[@rayganter8029]

WOW Love these old and hand made cars

[@Metal_shaper_tom]

Me too!

[@ivangreat133]

Well done on 10k subs Tom 👍

[@Metal_shaper_tom]

Thanks Ivan

[@kevinvile5223]

Been meaning to pop up to Prescott for years defiantly going to make time, it looks like a fantastic day for a petrol head.

[@Metal_shaper_tom]

It’s bloody brilliant. Definitely try and make time if you cat

[@niallsommerville9813]

Brilliant and well done for the 10k. I'll swap that for a Lego Defender (that's a mad kit).

[@Metal_shaper_tom]

Now that’s tempting!!!

[@paulbeckwith5981]

Found you from Oak Swamp, had to subscibe, love what you do! Congrats on 10k subs!

[@Metal_shaper_tom]

Cheers Paul 👍

[@joseywales3789]

Congratulations 🎉 Tom on 10,000 subscribers.... You deserve every single one of them. I used to marshal at Doune hillclimb in the late '90s.. it always amazed me that the "old guys" in the '20/30s cars used to race as if their lives depended upon it... The young guys seemed to remember the cost of the cars that they were sitting in.... Seeing a 75 year old Man driving a 75 year old car, worth £750,000 .... On the ragged edge, sure got the blood pumping 😳.... Wonderful experience even if you aren't a car nut!!! Congratulations again 🎉 Tom 😁

[@Metal_shaper_tom]

Thank you for the nice comment 👍 I completely agree it’s definitely worth seeing as the noise and smells are amazing

[@iainmarshall2514]

Just found your channel through Oak Swamp coverage of the Hill Climb. Great channel you have and just spent a good few hours watching some of your content. Good stuff

[@Metal_shaper_tom]

Thank you . Much appreciated 👍

[@trevorwoods2580]

Some beautiful cars there Tom thanks for bringing us along with you. Here's to the next 10,000👏👏👏.

[@Metal_shaper_tom]

Thanks Trevor. Fingers crossed for the next 10k

[@gerryoneill8881]

Good video very enjoyable.

[@thedoingnotthedone]

That was quick editing! My Austin 7 tip from my time there was have a big drain hole in the floor. I was in a puddle by the time I got to the start line and then I accelerated up the hill. Many years ago now. My godson was there today, hopefully his car ready for next year.

[@Metal_shaper_tom]

Yeah very quick I done it as soon as I got in. That sound like a top tip! Hopefully your godsons car is there next year 🤞

[@davidlaver5972]

Hopefully mine back on the road soon with a Reliant engine and there - parked next to yours - for classic prescot or something. Am also heading in that direction with the son of the late friend who helped build mine.

[@nicholaistent1052]

Great stuff, keep it up!

[@Metal_shaper_tom]

Thank you 👍

[@tramptruck4859]

Congrats on 10k subs, you deserve many more. That looked like a great day out with some wonderful machines 😀

[@Metal_shaper_tom]

Thank you . Much appreciated 👨‍🏭

[@dougwernham5209]

Excellent video thanks Tom.

[@Metal_shaper_tom]

Thanks Doug 👨‍🏭

[@alanhulsizer8295]

Congrats on 10k!

[@Metal_shaper_tom]

Thank you 👍

[@stevewilliams2498]

I must go to Prescott. I just love VSCC events and have been to many at Shelsley. PS My son loves Lego Technic

[@barrydavis3044]

Beautiful cars and interesting engines not like the boring crap people drive today. 🤘

[@Metal_shaper_tom]

Completely agree

[@felix_mue]

Congrats on 10k suscribers. I like Brayn and oak swamp too - hope one day you will build a rat!

[@benwildman4410]

Another great video

[@Metal_shaper_tom]

Thank you 👨‍🏭

[@Walt_G]

lovely looking cars, are you planning on hill climbing your Austin 7?

[@Metal_shaper_tom]

I will but it won’t be this event as it won’t have the correct engine in to be eligible.

[@billcartwright9581]

are these cars vintage or home made in the back garden, nice to see

[@thedoingnotthedone]

Some as they have always been, others developed in fits and starts, some recent special builds on old chassis with period correct everything as period.

[@Metal_shaper_tom]

As already mentioned . As long as they have period part then they can race in these categories.

[@billcartwright9581]

Well I think it's a good thing for mind and matter to preserve the quality of the sport

[@davidlaver5972]

Alas I missed this year. My godson's fave (in Tom's video) is an ex landspeed record holder and grand prix car. I've done the event in a special made from mid 30s Austin bits, a couple of wok lids, coke cans turned into lights etc literally in the back garden (in a tent) - kzbin.info/www/bejne/mnuYgaqehqlooMk

[@Biokemist-o3k]

Fantastic!! I am starting a KZbin channel and my first build is a 1928 Morgan RIP GN Special and my next will be a 1935 MG Magnette supercharged Boat tail racer with dual tires in the back....

[@Metal_shaper_tom]

That sound bloody brilliant!!

[@crescentcoachworkscollecti378]

lego has a lot to answer for, I have an Austin 7 and a vw t2 and it all started with building lego cars.

[@Metal_shaper_tom]

Lego is very dangerous indeed!! 😂 I’ve always been a fan of it!

[@chrisyea7049]

Hi Tom great to see you make 10k, just a quick one, when you make your wire bucks what wire do you use and where do you get it , cheers, Chris.

[@Metal_shaper_tom]

Hi Chris. I normally use 6mm steel bar but for this build I’ve got 8mm as that the steel stockiest had at the time .

[@robertnightingale4101]

120 🔥

[@richardfawthrop8056]

Pick me pick me

[@aapje]

Congrats on 10k!

[@Metal_shaper_tom]

Thanks 👍