President Richard AM FM Export Radio Overview + Hidden Menu

[@timnewtonmbpss4522]

I'm a UK truck driver and own one of these radios. I run a Uniden Bearcat Mic on mine (after the [remove noise cancelling] mod) and this radio kicks ass. I'm getting (in real terms) about 35 watts on Fm, but i want to emphasize is how good the 'ears' are on this radio. It has a great receive circuit which draws in weak signals. This combined with a good solid output has given me some great reports. Thanks for posting the video.

[@LeeTaylor-yx5nh]

Is the noise cancelling mod on the microphone or the radio? What ever microphone I use on my Richard the audio is always very quiet

[@WEREWOLFUSMC]

​@@LeeTaylor-yx5nhuse the original mic and full mic gain. Sounds loud and clear!

[@williamn01]

​@@WEREWOLFUSMCWould you recommend this radio Carl ? I've not been on the CB for over 25yrs but thinking of getting back in to it and getting this rig . Any recommendations would be appreciated. Cheers William

[@WEREWOLFUSMC]

@@williamn01 yes, absolutely! If you are in the U.S. get it from Walcott Radio and have them install the CB Channels and tune it. Well worth the extra $50. Got a bad one from Amazon but got my money back. It's such a loud radio in such a small package!! It has all the bells and whistles but no sideband. Cheers👍

[@robgibbsofficial]

I've owned this radio here in the UK - it had a lovely audio on FM and worked really well with the Zetagi MB+5 desk mic - excellent video best 73 Rob

[@timnewtonmbpss4522]

I also live in the UK (Devon) and own this radio. Not sure if you agree, but i found this radio to have excellent 'ears'. The receive circuit really does bring in distant stations. That aside, it's a lovely piece of kit.

[@robgibbsofficial]

@@timnewtonmbpss4522 yes the radio definitely has great ears - literally the only drawback is the lack of SSB but currently it's a great price around £139

[@jeffstarks6013]

Nice Review, thanks. Nice to see President keeps stepping up to build something new. After seeing the same Ranger boards for years, it is refreshing to see new radios.

[@unclequack5445]

Once you see what a Stryker sells for you will see how good a deal the President Richard really is I cannot say enough how good a radio this is The "Dick" and a KL203P amp are the best deals in CB radio right now. Also this is the best demo video on this rig you'll find.

[@alfy234]

Best demo by far

[@Lanemen01]

This video is very helpful and educational. Everything I’ve learned on this video for my President Richard makes it work amazing! Thanks for sharing!

[@alfy234]

Best review vid I’ve seen top notch my friend and I really liked the 3 type mic test at the end I just added an Astatic to my president Richard with a 6 to 4 adapter I’m old school connex guy all the way love em so good but the more I use this lil Richard an more I learn about it the more I like it 👍

[@DaveNathanson]

Thanks for the high quality & very clear info with details. Much appreciated!!! You are awesome

[@lesgobrandon]

Yeah ssb is a deal breaker nice video none the less.

[@craigm5601]

You can buy one with ssb same brand different model not really any advantage in ssb radio other than 12 watt vs 4 and you be getting 30 with this

[@UNIT711TMSCOTLAND]

Great radios the Presidents for audio/build quality and receive! I had the President George and the Lincoln I regret selling them! Best 73!

[@johncrouch8988]

Not everyone uses ssb! Great radio ✅

[@ibkg]

This video has helped me many times thanks for making such a in depth video

[@greedyfirstalgorithmlast26]

!!!!! WOW THANKS YOU FOR STILL BEING THE BEST.

[@breakerbroke23]

Good looking rig, but no SSB Cheers

[@georgegooden3289]

I like the radio! Very informative. My mobile is used for 45 min commute 2X a day in heavy stop and go traffic. I found the Lincoln distracting to operate in those conditions and put it back in the base. Radio simple to operate and enough power. I run this little Richard with a Lil Will antenna a perfect match!

[@robertalexander7684]

Good to know.. I'm a novice.. The guy who sold me the radio said that the Lil Will couldn't handle the power from this radio, but it's working for you.?

[@WEREWOLFUSMC]

​@@robertalexander7684run a Wilson 1000/5000 and get the very best this Big Dick can do!

[@hamradiohack]

Too bad no ssb. Nice review as always 👌

[@justinp4344]

I really appreciate your videos. Thank you for the details

[@mattriley6866]

I run that radio in my pick up. Really nice radio for the price. Best video I’ve seen on this particular radio ever!! Great job. I never messed around w/SSB even when I was still trucking. That said I’m really interested in that & maybe even get my HAM license. Not sure if you ever cover that stuff, but I would be happy to see some things on those. Again great video 👍🏻👍🏻

[@R34L17Y]

This is a nice radio. Since the FCC just opened up FM mode for CB frequencies here in the states, I am looking for a radio and seems this rig is the one.

[@ZommBleed]

If only they would put SSB in it. *sigh*

[@Patrickjdee66]

Excellent review , that’s my Christmas present sorted, the wife doesn’t know that yet, thanks for your help, best wishes Patrick 🇬🇧

[@davidblunt3501]

Howdy Mike; Got a new site,Great I finally bought a mckinley and I' having a ball with it Have a great one

[@blainehartley9157]

Still have the adjustable frequency counter after conversion....go in menu and turn step on....now you can move use like a vfo again like before conversion....I’ve had this radio almost 3 years now....sent first back for bad echo function...had 13n10 finals....replacement came back with irf520s....no big deal but there is an early batch with 13n10 finals that everyone loves or hates....also have a Lincoln 2+ latest version....both are great radios

[@ZommBleed]

I'd be interested in hearing more about your Lincoln. I almost bought one. I run the McKinley with an RM Italy 203P. I actually use it mostly for the preamp, believe it or not! I compared the Grant and Lincoln about a year or 2 ago and thought I had landed on the Lincoln, but never pulled the trigger. I've got several Strykers, a few Cobras, and my President. My Uniden Bearcat 980 SSB and Stryker SR-955HP have both been in the shop for OVER A YEAR. (WTF?!)

[@blainehartley9157]

@@ZommBleed the Lincoln is great…I have a 955 as well but prefer the Lincoln hands down due to much better user experience….for instance the 955 requires going in a menu to change the step on the vfo where the Lincoln is easily done by simply pressing the channel selector….some people never notice this because they never move off the 11m cb band but if you plan to “surf” the bands or to use all the features of the radio I would take the Lincoln over the 955…the 955 does do a few more watts but I’ve gotten better compliments on audio with the Lincoln….I’ve tuned both radios myself and I have the Stryker running a bit less than most run it at around 65-70 watts….anything more than that and I find that the quality of audio goes downhill rapidly….as far as ssb goes they both are very stable and do well….the internal construction between the Lincoln and Stryker are very similar…the same company builds the boards and other than a few layout differences they are nearly the same….my gripe was having 2 of the “same” radios under different names but after running both over 2 years my Stryker stays on the shelf most of the time….the Lincoln is a more refined radio where the 955 gives me the impression of a glorified cb with chrome and lights….the Lincoln is more in line with a real amateur radio in my opinion….both radios are great when compared to other export style glorified cb radios but when put against each other I prefer the Lincoln but not necessarily because it’s better but because it’s a better user experience if that makes sense.

[@ZommBleed]

@@blainehartley9157 Good information to hear. Thanks. I might just lean towards the Lincoln. It also does 10, 11, & 12 meters. (The II+ Model).

[@blainehartley9157]

@@ZommBleed that’s the one I have you won’t be disappointed

[@Texas12valve]

This is pretty much exactly what im looking for. Im not really a huge fan of SSB, i have an SSB radio and hardly ever use SSB. However it would be nice to have FM so me and my wife could have more privacy

[@ReverendBow]

Nice review. Nice radio. It is amazing that companies keep pumping out AM/FM rigs (mainly for Europe), but SSB rigs are few and far between... The FCC needs to get with the rest of the world and allow FM on 11 meters... or we should just start doing it anyway...

[@AnyoneSeenMikeHunt]

CB started by people 'just doing it anyway' and then the FCC just simply legalised it's not as silly as it might sound :)

[@littlerhino2006]

I guess you've heard the recent news

[@ReverendBow]

@@littlerhino2006 what news is that?

[@ryankc9oza118]

@@ReverendBow fcc is going to allow fm

[@ZommBleed]

...and more you have your wish. FM on 11 m.

[@richardmillican7733]

Did you ever review the Alinco DR135DX, it's sold as a 10 / 12 meter but can be altered WITHOUT having to open the case, it can be programmed WITHOUT having to open the case. Great radio, has ssb!

[@321CatboxWA]

Where is the Watergate feature ? :( Could have been the next legendary radio . Pres Richard / Watergate . I would buy it ! Who would turn down that unique defining feature ? Of coarse it watergates , its a president Richard ! Nice review 73s

[@TimothyKammrad]

I hear you guys often testing, North of Montreal, Quebec

[@JoeR203]

Agreed on the need for SSB. The Lincoln and McKinley are too menu driven. Knobs and switches are the way to go.

[@cbradiomagazine]

Great feedback! It will be interesting to see if President makes a SSB model using this footprint.

[@ZommBleed]

I have a McKinley and love it, but hate the menu-driven operator access. I love me some old fashioned knobs 'n buttons. The Richard needs SSB. Hardly anyone talks on 38 without LSB. I regret buying a second Cobra (no SSB). Would have been better off with another McKinley, Galaxy, or Stryker, etc. with SSB.

[@mattriley6866]

Yes I love this radio but not crazy about the menu stuff. I’m looking at a Stryker 955hpc would like to learn about SSB & start playing with that set up

[@cariboooutlaw4852]

But if you add more knobs and switches then the radio would not be small sized that would fit in most vehicles today! Hence the menu to make them small!

[@JoeR203]

@@cariboooutlaw4852 You don't need more than vol/sq, RF Power, Mic/RF Gain, NB/ANL, AM/USB/LSB and a meter. No need for gimmicks like color changing screens and stuff. And if the manufacturers just have NB/ANL on, no need for a switch to choose it.

[@digitaldobbie]

Ssb is legal here in the UK without license now days (since 2007) which is a shame that this radio does not have it. Not had a copy to the states in a few years now, are you guys still there?

[@spaceflight1019]

If you check out a propagation site like Solarham you'll get depressed. The sun hasn't been ionizing the ionosphere since 2016 or so and most days the maximum usable frequency never goes above 30 meters. On CB here in the U.S. we get occasional sporadic E and tropospheric skip but have gone for months at a time without a peep. It's open today to the southern states but not across the pond. Maybe someday.

[@ZommBleed]

The good news is that the solar index will peak in 2525. It's been slowly edging up mostly lately. The good news is that 2022 is almost here. Getting closer to 1970s style radio. (Looking forward to seeing Pirates again.) Ahhhh...memories of my childhood and deregulated radios in the States. During and after the 80s, was the falloff in their use, in my experience. Trucking industry here still uses them quite a bit, but I've noticed it's contained within certain city centers and major highways. When I was working in and around Dallas - Fort Worth (Texas) area, it was booming. I both benefited from it and helped others in many traffic and road/weather conditions up there. Was glad to have it, for sure.

[@excodice5432]

Could you, in theory, solder a switch in-line with the jumper and be able to switch between 10-meter and CB or when you set PD to 1234 are you unable to reset it to 10-meter? Great video!!!

[@randysandstrom9534]

Once you have made the change to experimental mode can you change it back without removing the jumper ?

[@chris2crazzy]

How do I adjust the frequency?

[@majorkonfuzion1007]

insted of a jumper cable,.... can i solder a switch insted ?

[@brettcaporale8031]

After you do the frequency expansion on this radio can it still be left in the non channelized mode and just vfo up and down?

[@chris2crazzy]

Mine went back to the 10 meter mode without the PD option

[@mred3660]

Maybe need some info for fm deviation now that fm is legal here in the states

[@richardlevari9470]

Just wondering if anyone has been transmitting on FM? If so what channel.

[@sgt7911]

When you make the jumper connection on the board does it make the am side 50 watts also For the president Richard. Thanks

[@813sierravictor]

@cbradiomagazine lots of people on the web are saying use a 1K resistor for the mod. Is there any reason for that, rather than just using a wire?

[@jeffreydavidconner]

I have the two dots with a line. But I don't have the PD 1234 option on mine. Or do you have to run the jumper first for that option to show?

[@Ihateallgingers]

I just did mine. I didn’t look for the option before putting the jumper in. But it was there for sure after installing the jumper and is functioning as a cb. I literally did it last night. The radio arrived yesterday from a seller on Amazon. Not quite an answer to your question, but it would appear to me the option doesn’t show up until after the jumper based on your experience and mine.

[@DavidWilson-uj5yv]

If you switch it to CB only like you showing the video how many watts is the radio pushing

[@muddy32456]

navigating the hidden menu only works with the stock mic. found this out after wiring my D104 using the stock plug. now i got to get another 6 pin plug to go back on the stock mic...

[@trondyne3513]

What does the jumper next to that one do?

[@servicetrucker5564]

I bought one from drail the other day and I had them put some resistance to that light because it is way too bright in a dark cab

[@chase196222]

How do you change it to 11 m CB

[@gregloader9245]

You can turn on/off VFO tuning mode by going into menu and turning the Span on after modding radio. Also I am curious if it is possible to transmit on 12 meter.

[@jason-qi4yz]

How do you change the frequency mine was on the 27 frequency and now it went to 28 and i cant get it to go down

[@brettjohnson5755]

Does this mod cut back the cb wattage when done?

[@EltonDijon]

I cannot get my radio to go into the PD mode in the setup mode it does not show the PD mode in menu

[@xiior4039]

Got a custom astatic mic. It keeps changing the channel whenever i try and key on. I remember changing the setting for the other mic a long time ago but i cant figured this out

[@cbradiomagazine]

First you’ll likely need to change the setting to Dynamic in the menu as I’m betting your astatic microphone is a dynamic model. If that doesn’t fix the issue check your wiring to make sure no wires are making contact. If it still is doing it you may need to add a resistor in the microphone. I had this issue with a road devil on a President Lincoln II but this was before they had the dynamic option in the menu.

[@dancingibiza]

i did the complete reset of the radio so it went back to 10 meter. Now i dont know how to put it back on the cb channels. Can you help me how to do it?

[@0426dav]

On the FM mode, under the engineering section, is that the deviation adjustment? Just guessing. Thanks and Thank you for sharing your knowledge and excellent and most informative videos with us. By the way I don't own a President Richard I just enjoy watching radio related mods.

[@ScottsRadios]

There was a rumor that pre covid President was planning on building a radio like the Richard with SSB.

[@damiengirvan5020]

That's radio only lights up orange.... But also forces others radios to light up orange.... And if any other breakers try to talk over you.... The radio will keep repeating the last thing that you said but get progressively louder by increments each time..... Best radio everrrrr.....

[@techiefan1986]

However about receive? How would you rate the Noise Blanker circuit with taking out electrical noise?

[@unclequack5445]

I searched for a Radio with Echo, Talkback/Pa and even Roger beep, President Richard has it all at a lower price Galaxy/Connex/General Lee/ "Export" jobs always sold out & high $ the Dick/KL203P MosFet amplifier if you have limited space installs easily I bought another President Richard when I did Amazon had them @ 169$ I have one as a base rig on 12 v supply one in the mobile with Astatic microphone I love this rig best deal going. You cannot find a better rig at this price sir.

[@scottleland5370]

What mag mount antenna would you recommend say you did the jumper for CB?

[@concernedcitizen5057]

The pd option doesn’t come up on my menu options? Any reasons why? I’ve reset it on both modes and the pd option still doesn’t come up on the menu

[@jasonraulston3922]

The no Sideband use to would have bothered me but now days it doesn’t people are pretty rude anymore on Sideband use to be fun not so much anymore only time I really use it now days is to talk to a buddy that lives 50 miles away I’m probably going to get one of these for my everyday driver we talk locally on AM

[@morganbrady2230]

Why do I have duplicate channels?

[@bpdenverco]

So I did did the conversion. I looked in the manual I have 2 channel numbers that are the same example 11 and 11 with a little symbol between the 1 and 1 looks like a A any thoughts

[@JohnnyHolder-sd1mv]

Alfa channels

[@bpdenverco]

@@JohnnyHolder-sd1mv thanks I did get it figured out

[@DankLordMaster]

How do you scan??

[@BrokerFr8]

Not sure what I’m doing wrong but I don’t hear the talk back at all. Anyone have this problem? By the way the talkback indicator is lit.

[@JohnnyHolder-sd1mv]

Hold the mic key in push talkback and turn the channel knob for talkback goes 1 thru 9 you might haft to do it a few times but you will get it I had problems with it to.

[@deans2147]

Quick question.. Has anyone noticed when using the built im SWR tester, that the beep can sound distorted at Any volume level? Thanks

[@colinl5951]

Channel 9 is emergency. What is this 6?

[@geofftubeyou]

Great video. I think it's very informative. I have a President Ronald and I'm looking for a how-to video. I haven't seen one on your channel. Do you have one available? Thanks

[@mrdx777]

Does anyone else have an issue of the deadkey spiking when the rf power is turn all the way down? If so, do you know how to fix that? Thanks!

[@timothyjones4950]

A good looking radio, thanks for the info, best regards, Tim 26 HT325

[@morenotron-elgigantedehier5630]

Hi I used the cb president Richard on AM but can you tell me how I can take the 50 watts on swing ?(what do you mean by swing)

[@blainehartley9157]

Per president 100% modulation is 113 in modulation menu....I found best results around 118-120

[@ZommBleed]

This should be pinned.

[@JohnnyHolder-sd1mv]

Where did you get info.

[@blainehartley9157]

@@JohnnyHolder-sd1mv from president….115 seems to be the magic number on the modulation setting

[@JohnnyHolder-sd1mv]

What about the power level setting.

[@JohnnyHolder-sd1mv]

Wattage I mean

[@nickkoski7076]

If it had ssb i would by it. It would be a sweet rig if it had it

[@AdamCSmith]

I almost can't believe anyone goes through the trouble of making a new 10/11m radio and it doesn't include SSB. Astonishing to me! Are we crazy?

[@JoeR203]

@@AdamCSmith It's like making gloves with only 4 fingers.

[@bobdillashaw4360]

I just don’t understand why they didn’t put ssb in it as 10 meters is predominantly a ssb band, if they put that in it then I’ll buy it with the 11 meter mod

[@cbradiomagazine]

I think since they have the SSB Lincoln and McKinley out there they wanted to target the under $175 AM/FM market.

[@bobdillashaw4360]

@@cbradiomagazine I know, but the Richard to me anyhow is a really good looking radio, I just love that old school look, great video by the way!

[@cbradiomagazine]

@@bobdillashaw4360 Thank you - some more radio reviews coming soon - including a new SSB radio. :)

[@hamradiohack]

Although 10m its intent was never for 10m. Hence no ssb. As stated its marketing. Cant complete with their more expensive ssb radios. Calling it a amateur radio is just a way to make a high power cb radio without liability. If you truly want a good ssb radio and dont need good am then buy the cheapest ham radio you can find. And let me just clarify if it only covers 10m its not a ham radio. But personally 500 plus is alot for a radio if ch38 is all you want. But the yaesu ft891 is the best small 100w ssb radio you will find new under 1k. Personally I prefer a old cobra 148 or grant with a amplifier.

[@bobdillashaw4360]

@@hamradiohack dude I am a ham with my tech license, I use a yaesu ft 991A as my base to run 4 of the bands on it, and I enjoy the ten meter band when it’s open, but I’m looking for something for my truck to use that has a little more power and stable on ssb because nothing is worse than trying to tune in someone while driving lol. But I love the looks of this radio, just wished it had ssb in it, as for the Lincoln ll, I’ve heard mixed reviews that made me shy away from it, and everyone knows Galaxy is notorious for drifting so that’s out. Thanks for the explanation though 👍🏼

[@michaelpreston7106]

I have this radio i love it love it it gets out it receives really well and I found that menu for the power I did turn the modulation up ot was like night and day this is one of the best radios I have ever had, and im a galaxy guy through and through. This video was very good it did go into alot more detail than any other ive watched.. im glade that someone else feels the same way about this radio that I do, even at factory settings I was talking 6 to 7 miles with a 1000 watt antenna. I really want to get a president antenna to pair with it.. anyway thank you for the video and if anyone has any doughts this is one of the best radios you will ever buy

[@ZommBleed]

I run a steel whip on my truck and a Lil' Will on my car. Haven't gotten around to mounting a 9' whip on the car. Lol...yet. The 102" whip needs a 6" spring. (It needs to be 108" for 11 meters.) I never could find a stainless spring (6") so I have a 4" spring with risers to bring the whip up to full 1/4 wave length. Still running a Cobra 29 in the truck, since it's temporarily mounted on the dash. When I do a hard install, I want SSB to go with it. If this radio (Richard) had SSB, I'd get two of them. I currently run a McKinley in my car (super great radio, can't recommend it enough). I actually wanted to run that in my truck, but since I only have one, it's staying in my car. Both rigs run an RM Italy 203P. Reports are great from pro radio users on the road with that combination. I come back to these older videos to refresh my knowledge about current models being sold, so when any newer models come out, I can do an honest comparison. (I have more radios than I could ever use.)

[@MrGjenniskens]

Is the PD mode only visible afther soldering the jumper cabel?

[@MrGjenniskens]

I just tested it (was anxious for a desaster) and yes it worked. pffffff. :)

[@willardfishbean]

Thanks for the great video. Question: Is there a way to remove the "alpha" channels on the CB mod? I just want the standard 40ch.

[@ZommBleed]

The Walker II is the FCC 11 meter CB radio you want. It's the legal CB radio that the Richard isn't. Otherwise, they're the "same" radio, as far as the limited channels that you want.

[@ManuelPinner]

The Radio is Now with the New FFC Part 97 can be Use here in the US,

[@kflo01]

Is this a Ham radio or CB radio?

[@xjohn1970]

does it have vfo?

[@bensmith136842]

Sir, you know when you be doing a review of the New Ranger X9?

[@cbradiomagazine]

It’s been out of stock everywhere pretty quickly so not sure. Ranger didn’t provide any demo units to shops so also have to spend a pretty penny to do a review.

[@woodydel]

Why would I use this radio and turn it into a cb

[@027MC7]

So if I'm understanding the pa function correctly, it's possible to recieve and transmit through the pa Jack? Or does the transmit not go over the air?

[@cbradiomagazine]

When in PA function transmit would not go over the air.

[@027MC7]

@@cbradiomagazine thank you.

[@lonnien.clifton1113]

IT WOULD BE NICE IF STRYKER COULD COME OUT WITH A BASE STATION ALL I HAVE IS THE SR 955 HP MOBILE RADIO RUNNING OFF A ASTRON 50 AMP. POWER SUPPLY

[@027MC7]

A stryker base would sell like crazy imo. I'm first in line lol.

[@mattriley6866]

@@027MC7 Seems the Stryker 955 are out of stock everywhere?? Anyone know why?

[@ZommBleed]

I emailed President. I asked them about future Richard models with SSB. They didn't address that part of my email :( Maybe it's on the drawing board and too secret to talk about. Yeah, right. Dream on.

[@AnyoneSeenMikeHunt]

You emailed the President? Don't they just use Twitter now? :)

[@ZommBleed]

@@AnyoneSeenMikeHunt No, they get all their tweets censored.

[@robgibbsofficial]

The president George 2 has ssb and its a lovely radio

[@plugnalong2186]

I have a hard time getting into a radio that is supposed to be a 10 meter radio that doesn't have SSB, just doesn't ring well in my mind. Nice video though.

[@cbradiomagazine]

It's appeal will mostly be for AM/FM export radio users who likely wouldn't be using it on 10 meters so that's why it doesn't have SSB.

[@siempreazul7163]

What gauge jumper wire did you use?

[@alfy234]

I just soldered mine from end to end kinda made a bridge works good so far been running it bout 2 months

[@tonywilliams3090]

How do you calibrate this radio for CB?

[@CASH-1846]

Jumper wire in first minutes of video

[@mattriley6866]

So I use the road devil on my Richard. Can I still access the the hidden menu or do you need to use the stock mic?

[@blainehartley9157]

Still need stock mic to move between options in special menu

[@mattriley6866]

@@blainehartley9157 ok cool thanks for the reply.

[@bartoszri]

Richard or McKinley ? as CB radio, no SSB. Richard have more power (but for what?) and better IMO knobs. Could be better tune. McK fave a complete radio, front speaker, SSB but knobs (especially RF Gain which I use instead of ASC) with steps. No smooth regulation as Walker/Richard.

[@ffirstllast3328]

Rats! No SSB - Ruined it for me (looks like everyone else also from the comments)

[@cbradiomagazine]

Don't worry there are some new SSB radios coming soon as well :)

[@Fox250R]

I spent 240 and got the Lincoln 2+ lol

[@alvarogaitan2529]

Nice radio thanks how much?

[@Mason-RRC]

I don’t understand why all of the no SSB talk.... I have this radio and love it! I have never seen the need for SSB or even understand why anyone would. Someone please explain.

[@kobolila-yt]

Chasing skip on SSB is fun. If your primary use of the radio is chewing the rag with other drivers on the road and listening for road reports then SSB wouldn't be much use but, if reaching way out there and making contacts across the country or world is also your thing, having SSB on your CB is a must.

[@IvesMarcelin]

❤👍

[@timothyaiken9752]

it fascinate me how you remember

[@ВладКоля]

Привет,друг,как с 5 на 0 выйти?

[@tpms-serviceeu7071]

Thank for the informative video - LY5LM - 73

[@LeGlod]

The original President Richard(Superstar 360) was from the SSB, but not the 2, it's a shame and misleading, he should have been called JFK and not Richard.

[@robgibbsofficial]

For all the comments re there's no SSB - check out the recently launched President George 2 - Great radio

[@VicGreenBitcoin]

To bad no SSB, good to see FM, nobody uses AM here sins the early 80ies

[@Stover159]

I had to turn my AM all the way to 50 for full modulation

[@BoB4jjjjs]

yeah, adjusting a radio without the proper equipment can and usually does lead to a disaster. Unless you know what you are doing, stay out of adjustments, it is only to easy to screw it up. Seen it to many times.

[@Gw0wvl]

I've still got the Original President Richard .. AM,FM, USB, LSB, CW ...Having a rig these days without SSB is just a waste of time , Especially for 10 MTRS ... But as we all know it's a CB radio , Not a true 10 MTR radio .