How to Record in Studio One | PreSonus

[@thatsmetalking345]

I am unable to change the settings in Audio Setup, other than selecting audio device. Why would this be ? No dropdown icon, no other settings other than the default setting.

[@olafkliemt1145]

most important on Windows system is the OS optimisation : General optimisation Windows 10 PC 1. Set your computer's power for high performance If your computer is set to conserve energy, the CPU may not be running at full speed all of the time. This can have a detrimental effect on your computer's audio performance. To set your computer's power for high performance: - Go to: Control Panel>Power Options - Choose "High Performance" - Then click the "Change plan settings" button. Make sure both power options are set to "Never". 2. Disable system sounds System sounds can interrupt audio applications. Ensure that they are disabled by doing the following: - Go to control panel and select "Sound" - Go to the sounds tab - Under sounds scheme, select "No sounds" - Click "Apply" then, "OK" 3. Set processor scheduling to "Background services" This will improve the performance of your audio drivers on your computer. To do this: - In control panel select "system" - Go to "Advanced system settings" and then the "Advanced" tab - Click on "Settings.." under Performance to bring up the "Performance Options" window. - Go to the "Advanced" tab and set processor scheduling as "Background Services" - Click "Apply" then "OK" 4. Disable 'Windows Background Apps' Windows 10, by default, runs a number of Apps in the background, regardless of whether you are using them. Select 'Settings' from the Windows Start menu, select 'Privacy', then select 'Background Apps'. From here switch 'Off' the apps that you do not believe you are using, or that you do not wish to run in the background when you are not using the program. 5. Disable 'Windows updates from more than one place' Navigate to 'Settings' in the Windows Start Menu. Then select: Update & Security -> Advanced Options -> Choose how updates are delivered -> Turn the slider from 'ON' to 'OFF'. USB optimisation: If you're using a USB interface then we'd also recommend checking the following settings: 1) In the device manager (Right-click the Windows icon > Device Manager), in the Universal Serial Bus controllers section, right click each USB Root Hub, choose Properties > Power Management and untick the Allow the computer to turn off this device to save power option. 2) Next, right-click the Windows Icon > Power Options. Set both "Screen" and "Sleep" options here to 'Never'. Set the Power Scheme to High Performance (if this setting is not available, click on "Additional Power Settings" on the right side of the screen). Then click on Change plan settings. On the next page set both "Turn off the display" and "Put the computer to sleep" to "Never". 3) Then click Change advanced power settings. In the window that opens make sure you have the following settings: Hard disc > Turn off hard disk after > Setting (Minutes) = Never Sleep > Sleep after > Setting (Minutes) = Never USB settings > USB selective suspend setting > Setting = Disabled Display > Turn off display after > Setting (Minutes) = Never Processor power management > Minimum processor state > Setting = 100% Processor power management > Maximum processor state > Setting = 100% Please note, not all options are available on all machines. Advanced optimisation: If you wish to optimise your system further, or you are using a system that is particularly lacking in resources you can follow the tips below for advanced optimisation. Disable Sleep/Hibernate mode Sleep and Hibernate mode can cause problems on some systems. There are various sleep/hibernate states that different computers use and some system/device drivers may not work well when the computer comes out of these modes. If at all possible, it's worth disabling these modes to see if that improves your system's performance Sleep mode can be disabled by following steps 2 and 3 in the 'USB Optimisation' section above. This will prevent your computer automatically going to sleep (you should then avoid deliberately selecting 'Sleep' or 'Hibernate' from the Power Options menu). Disable Windows Firewall, anti-virus and spyware software If you're able to run your system without connecting to the internet then these should all be disabled to ensure that no interferences occur during audio recording or playback and to ensure that maximum resources are available. To remain secure while your firewall and antivirus disabled, it is advisable to disconnect from any internet connections when working with audio. This will also make sure that no network adapters are conflicting with any audio drivers. Disable Visual effects The visual features in Windows 10 can use resources that could otherwise help to improve audio performance. As a start, it is good idea to disable some of the visual features by doing the following: - Bring back up the "Performance Options" window by following step 3 above and clicking on the "Visual Effects" tab and selecting "custom". - Untick: "Animate windows when minimising and maximising" to help prevent glitches when minimising and maximising. You can also experiment with disabling other visual effects in the custom list to see how they improve audio performance. - Once finished, press "OK" If you wish to optimise your Windows 10 graphics for the best performance use the "Adjust for best performance" option. Disable Network cards Sometimes, network card drivers can cause problems with audio. A good troubleshooting step is to try disabling your network adapters in Device Manager, and then test local audio (like an .mp3) and see if you continue to have issues. This is also a good optimisation step in general. Disabled adapters can easily be re-enabled at any point. Disable Windows services One way in which you can make more resources available to improve audio performance, is to disable unnecessary Windows 10 services as these use valuable resources. The following site has a comprehensive guide to the services running on Windows 10 and helps locate the services that are safe to disable: Windows 10 Service Configurations by Black Viper Please note that we would recommend that disabling Windows services should be done only by advanced users. If you are still experiencing audio performance problems after optimising your computer for audio, please Contact Technical Support Disable Fast Boot Some users may experience an issue where audio becomes slowed down after booting the computer. This is fixed by disabling fast boot.

[@olafkliemt1145]

@AndrewGrey22 yes

[@cliffandhazelgaines5730]

Thank you so much, Joe. This saved my life. I was almost there on my own, but I couldn't figure it out are the low latency wasn't completely working on my vocals. So simple. Thanks.

[@ThatVeryStrangeMan]

Joe's presentation is without a doubt the most fun and entertaining tutorial that I've experienced! It's like learning from a fun friend. 😄

[@qtnguyen1573]

Hello, I don't see "Recording Device" when you said make both the same at 0:50. I just bought the Presonus Audiobox USB96 and downloaded Studio One 6 Installer. I guess they updated the software and only shows "Audio Device". No Playingback Device nor Recording Device. Help

[@VacantHaven]

Wonder if you could help? That Z button for low latency is not there anymore with new update. Do you know where it is now? Thanks for the video

[@presonus]

It depends on where you have your buffer and block size settings.

[@ambientsounds1416]

Hey Presonus how do i record the output of my main/master channel for techno rumble for example.

[@LittleRapGuy]

May I ask how come the picture of your vocal is not getting generated, or maybe you're editing that out? Doesn't it automatically generate the picture of the audio?

[@alexiakolokouri1101]

How do you enter your settings? You first mention it at 2:46 and then many other times and I can’t seem to find it😅

[@pawelprzybyszewski6071]

Your tutorials are the most useful. I absorb them like a sponge.

[@kaivrock]

Just excellent. I like using a foot controller for all punch ins. I'll be using a Focusrite Scarlett Solo as the interface. Where if at all, can you plug in the foot pedal? Thanks in advance for any help

[@kaitlindean9274]

How do you play back the recording? I try hitting the play button, but no sound is coming out.

[@mannycepeda1]

Hi Joe, I just bought a PreSonus Audio Box USB96. I've been doing recordings of my original music using Acoustica Mixcraft and I like it but I'm ready to move on to higher quality and more flexibility. I look forward to tips and examples using the PreSonus product. Best Regards, Manny

[@scubarojo]

A lot to absorb, but well presented, for a very technical subject. One can always come back and re-watch till it sticks in the brain.

[@chrisdunnettmusic]

A couple things Joe...although my experience is beyond much of this video this is hands down THEE BEST video I have seen on the topic of Latency! GREAT JOB! Ironically I ran into a guy today who just bought a Presonus small interface which came with the light version of S1 and was asking me DAW to use to which I said S1 and actually recommend he follow your tutorials to learn ;). I use a UA Apollo Firewire Quad with the Unison technology so my latency for recording is around 4 MS. The big issue with Latency is the switching back and forth between low for recording and high for mixing. Not sure if it's even possible but a great feature to add would be to have "recording mode" where you can set a very low latency then a "Mix mode" where you can have a preset higher latency. Just a though? A side note, a little late in the game but some of the Presonus shortcuts could be more intuitive. For example...I use R for Record and I for Inspector. That's the way it was in Cakewalk Sonar and it makes sense so I customized that in S1. Love your videos though man and hope to run into you around town here in Nashvegas :), cheers, Chris

[@jmorrisey79]

Buffer does this

[@chrisdunnettmusic]

@@jmorrisey79 Explain please?

[@jmorrisey79]

@@chrisdunnettmusic - It's the buffer that you want to set low for recording and high for mixing. This does affect latency.. lower buffer = lower latency and vice versa, but the setting you change is called the buffer. It's discussed in this video. I understand you were talking about an easier way to switch it, but I was clarifying the setting you change in case anyone reading this wasn't aware. I doubt they could simply add a "mode" of some sort because it would be completely dependent on the type of interface being used, of which there are so many, of different specs, by different manufacturers, which require different drivers. If the drivers are poorly written there's nothing that can fix that aside from updating the driver with a fix, which unfortunately isn't always done. Even if the interface is otherwise very good it'll operate like crap with bad drivers. Presonus can fix their own drivers (even though they haven't in the past - VSL Line), but their hands are tied when it comes to the thousands of other models on the market. A simple solution seems impossible in my opinion based on that alone. I'm sure there are other factors involved as well. This just is the first that comes to my mind. Again, this is only my opinion though. I very well could be wrong.

[@chrisdunnettmusic]

@@jmorrisey79 Gotcha. Yes, I'm aware that's what needs to be set and yes, I agree and realize there are many factors involved such as your interface (in my case a UA Apollo) so I realize it may be an impossible feature to add...sure would be nice though to have a preset for "Record" and a preset for "Mix" that changed all those settings at once :). Thanks man!

[@presonus]

We could possibly add a keyboard shortcut for changing buffer settings, but it's not terribly hard to go change that setting. And the great thing about keyboard shortcuts in Studio One is you can customize them to your liking. Lots of other DAWs don't give you that option. - Joe Gilder

[@ashleyveronica6449]

Got any tips on how to set up the settings on the interface itself? I just feel my vocals sound so muddy and harsh, I use the M7 microphone that came with the presonus bundle, but also if the input is lower, it’s so quiet and worse. I want to have clear clean and good volume vocals but I can’t seem to figure it out, honestly my phone sounds better most times!!

[@familyfirstjc327]

I agree and I am having that same exact issues! Have you figured it out yet?

[@lildirtdick777]

put the input volume as high as you can without it clipping. un-mixed vocals always sound bad.

[@kippb]

Thanks Joe. I was searching but do not see a lot of info on this....do you record vocals with NO effects chain? No vocal rider or compression? Is it just a dry vocal track that you RECORD on and then add everything else in the mix? I am wondering if most people record with at least a compressor on? Thanks!

[@therealjackfisher]

I thought I knew everything about low latency button, but it looks like I still learned one new thing. Thank you Joe!

[@musictech5789]

Dude , honestly, you are the ONLY one one this thing that actually explains thing CLEARLY..... Thank You Bro! I know you mainly record audio as a singer songwriter BUT so you have a video on how to do VST based productions? Thanks!

[@jakebadstibner8696]

For some reason I can’t change my device block size. It stays at a constant 441 samples

[@hopsbeats4845]

could doing layers help you play over your original take to layer harmonizing or do you have to add more tracks?

[@Radds1]

Thank you!! I've spent a lot of time trying to find a clip that explains this properly. Two things that I now understand. 1. How the little z works under the main fader. 2. Layers. So useful and so great to finally understand latency management! One question... Is there a recording quality hit when selecting a low sample rate e.g. 64 samples vs 128?

[@GVajb]

Thank you for all your tutorials, they are great. I have a question about S1 recording; can playing sound from external source trigger recording in S1 (like Beatmaker 3 have for example)?

[@derekabrams8943]

Joe always a pleasure to learn from you. I noticed in applying this lesson how changing the settings impacted my analog audio differently from MIDI signal. While I did not get clipping on my analog signal, after optimizing my interface based on this lesson, I noticed MIDI-clipping -- which surprised me -- I didn't think a MIDI signal could be clipped. Once I reverted my settings to a bigger buffer size, the MIDI-clipping went away. This was not specifically covered in this lesson, but something that might be a good future lesson. If I am recording a signal instrument at a time I can change the settings as needed to minimize delay. However, of I'm recording milultiple analog and MIDI sources at the same time, like in a live studio session in studio, I have to sacrafice one for the other.

[@dyemsighta]

Hi, i have a question.... It's been a while i use SO, but ive got one quetsion maybe you already added a video talking about this : Is it possible to edit while recording. I mean While i take vocals and it's recording how can i take one part and keep it while record is happening. Hope you understand my question 🤣🤣🤣🤣

[@Andynauga]

I can’t figure out how to get good volumes in headphones of what I’m recording..I have the levels way too high and I can barely hear myself..is the something obvious I’m not doing? Thanks

[@furryz666]

This was a good tutorial Joe, to the point and informative, I’m still living in protools land but I try to use SO4 a few times a week, thanks for the vids

[@rustycreekfabrication]

I have an issue where if I track a simple bass line on 1 track and a simple melody with a synth on another track, the bass plays fine but the synth track plays a little blip of each note but not the full note. Any idea why?

[@tthakurjatin]

Hi, joe i am very thankful for your sessions. Greetings from India. The issue i am facing is that when i am on the go and i have my small midi, headphones and my Laptop. At that time when i try to play-record something in studio one, i hear latency in my headphones. I am clearly not using and interface in this instance as i am on the go. I am using windows audio and i am hearing midi input latency. I have tried everything you and gregor have shown in the videos but it isn't helping me. I have tried reducing the block size but it never goes below 275 ( in windows Audio ) can you please help me with that and make a tutorial specifically for these kind of scenario's which i guess will be very useful for many. My laptop config - 16gb Ram m.2 ssd - 1tb processor - ryzen9-5900hx windows 11 genuine studio one - member please help me out in this.

[@riggsmc83]

Great Video... I am not seeing the "Z" on my main fader. Is there a setting that needs to be toggled to see this?? Thank you @presonus

[@LordShaProductions]

I dont have it either. I have the artist version

[@tatertotter25]

hey Joe.. local neighborhood simpleton with a dumb question here, but i'm having a bit of trouble with hardware monitoring vs native low latency monitoring. first off, it seems like hardware monitoring is generally faster than native/software. also, my "Z" icon lights up blue when using hardware monitoring if i have an interface connected that supports it (Presonus 1810c) but it lights up green when i click the option to use native low latency instead of hardware monitoring - i noticed at 5:16 yours remained green even when it seems you are using hardware monitoring. that's mostly just a point of curiosity. my main question is can you monitor channels being fed by inputs transmitted over ADAT to the interface with hardware monitoring selected? i have an external preamp that feeds its 8 inputs to the 1810c via ADAT, and when i opt for hardware monitoring (blue "Z") i cannot hear them in real time monitoring.... but i CAN hear monitored tracks/channels that are sourced from inputs on the 1810c itself. if i switch over to using native low latency for monitoring (green "Z") i can hear all channels when monitoring in low latency. .. is that... correct? i could have sworn i was just doing some recording last night with the blue Z and recording from some of those external preamp ADAT channels, but maybe i was using native low latency.. it was late, my memory fails me.

[@myandriendsofficial]

I have a little problem, my Apollo x8 work great, but when I hit the Z all my plugin doesn't work... Why?

[@finaljesus]

can you please do a video on how to add drums to one track but the whole drum track not just adding them one at a time on studio one 5 prime i’m using it with the spark amp thank you very much for your demo on this program

[@tedmawson260]

Thanks, this was well presented and very useful. Press the small 'Z' under the "main" slider to get the lower latencies for recording. I don't think that is in the instructions or did I miss it?

[@Radds1]

Agree! I haven't seen anything in the instructions about this either. And understanding the purpose of the little z so useful!

[@barneycarparts]

If you don't see the low latency "Z" in the master slider, when using an interface such as Bheringer Uphoria, install ASIO4ALL as your USB driver. and restart SO then click on studio one> options> choose asio4all as the device, then click configure and turn off local sound card use USB outs left side of ASIO4ALL config window.

[@IndependantWCommonSense44....]

I love how he doesn't beat around the bush. If he's going to fast, simply back up and listen again....and again.

[@jbstandardlatin]

I like the simplicity of your teaching. As a pure beginner, my area of interest in Presonus Studio One, I wander if there are ways to remove vocal and instrument (like guitar) in original music track. I like to play without them in live performance. If this is not available in PreSonus, can we play without them in Pro Tools? Thank you.

[@FrozenPlasmaOfficial_YT]

Thank you so much :) Stupid me never ever took notice of the Z on my main output...

[@stratmanuk]

This is really interesting and solves the problem I hit when recording my Positive Grid Spark amp but I've also tried Reaper and Ardour and neither had this problem in the first place so what's going on there lol!

[@SaintKines]

Same situation with trying to monitor just one track with Helix Native and STL Libra. Reaper works like a charm of course but when I'd try to do this simple task in Studio One it couldn't do it without spikes. The reason is Reaper and some others kind of take care of what he just showed us by default. One of the many reasons I love Reaper. I gave Studio One a real shot and I do like it but I'm back with the trusted Reaper. I'm not a brand fan boy so I'm always willing to try something out to see if I like it better. I've tried most DAWS but Studio One seemed like it could be the one to usurp Reaper for me. I definitely like it more than all other DAWs I've tried not named Reaper. I still have it installed and I plan on doing an entire big program in it from start to finish to see if I change my mind. Its default a great DAW, we just all have our different needs and tastes.

[@kennethhoneycutt4513]

I am using studio 15 artistbut not sure where to put my V. VST's can you help with that

[@tlingen1]

Great job. Man your fast at this, I'll need to watch this again. Thanks!

[@presonus]

😊 - Joe Gilder

[@The62gretschgent]

Hi Joe, I have just installed Studio One 6 by way of PreSonus Sphere subscription. My interface device is a Universal Audio Apollo Twin MkII quad core connected by thunderbolt to my iMac. I installed my Apollo in Audio Setup and a friend who also uses Studio One talked me through some configurations in Audio I/O Setup within Song Setup, but I think we've set it up wrong. The back panel of the Apollo has 2 XLR/TRS combo inputs labelled Mic/Line 1 and Mic/Line 2 and on the front panel it has a single TRS input which is supposed to be a dedicated instrument DI for guitar/bass. One of the input rows in Audio I/O Setup is labelled as Input L+R and set to stereo. Shouldn't all the inputs be set to mono and then assignment of which tracks are stereo or mono be configured within channel strips?

[@paulbechtel6437]

Does the little z show up on S1 artist? Starting to get the feeling that most of the tutorials are for professional. It would be nice if the would call that out.

[@caradecavalho]

So is Studio one automatically adjusting for the input latency on the takes you do, after the recording?

[@kendunn7143]

Joe, I have latest stuido one version, pro, I don't see the z button on master, is it somewhere else, thanks for all your work

[@fret2fret221]

I may be wrong but he’s probably using studio one professional.

[@G-Rockmusic]

Wow Joe. These videos are awesome. So much information in a short span of time that I’ll be watching the playlist multiple times :). Thanks!

[@kennethfarmer3734]

i have the fire studio project yet with firewire what is the next best interface to get

[@dv8media578]

thank ya kindly. Definitly helps with the occasional spats with my sanity of not being sure if my words hit in the right pocket

[@dv8media578]

A dirty diana lesson about not starting with the basics

[@DuduTNiyukuri]

Thank you a million times for this video

[@MariaSebastianBuffalo]

My screen does not show "Playback device" and "Recording device" under "Audio Device" because I'm using the Windows Audio option (my M-Audio interface is not on the option list). I'm having latency issues on playback. I'll keep watching videos until I figure it out, but this seems to me to be the problem because I can't get past square one.

[@theeducationvalley4876]

I'm unable to record a song. I'm trying for last one week or less. I could not record a peice of voice till now. I don't have a USB audio interface . I have a USB sound card. Can we use a USB sound card in place of audio interface. Plz help me

[@HayesTech]

Thanks for this video. I wish there was a tutorial to use this for video audio recording and not a song or vocal. I guess this would work too but but too bad they don't have an option for recording video audio. Something that just starts recording the audio and take that audio file over to my video editing software.

[@misterhipster6421]

When I have low latency enabled, I am unable to hear anything, but then once I unclick the Z I am able to hear it with the delay. How do I fix this?

[@EricSanson]

So here's a question... when I am in AUDIO SETUP, it does NOT give me an option for separate Recording Device and Playback Device under AUDIO DEVICE. Which really sucks because I do a ton of tracking with a Spark 40. I should add that my external box is a STUDIO 1810C. Can anyone help?

[@jasons3429]

Regarding Latency, after many issues I found that clicking exclusive mode in the audio control panel to on solved my latency issues

[@slideovathetop8941]

Thank you this is the only tutorial that makes sense 👏🏿👏🏿👏🏿👏🏿👏🏿

[@FrontCoverBand]

Who produced and mixed the music as the Intro of the video?

[@mikearnett-oz9317]

Thank You Joe! I learned more in this video than I've been able to look up for the last year. When I first started Studio One the Latency about whipped my A$$. I didn't have this problem with my cassettes. : )

[@victorgibson4680]

Can you help me? My mic is connected to my Scarlett and has worked before. I have all the setting set to go through the Focusrite, and set on the right input and turned up, but I still can’t get any sound through my mic

[@PinkFloyd793]

Hey, im using a motu pre es8 for an interface. When I hit T to make a track the input selections are only Input L and input R...how do I select my actual inputs?

[@bwall615]

Can you record through plug ins? Say an SSL channel strip. Which I currently do in cubase. Probably switching to Studio One in near future. Haven’t seen any videos on this.

[@toolondaboards]

Yes you can

[@ЛюблюСебя-ч8т]

How I can record with post/pre effects?

[@marc942]

So excited to make this change to Studio One bye bye tools ☺

[@hadicarefree]

What if you want to record vocals while listening to plugins without stamping the effect on the track. Thanks in advance .

[@alejandrojuarez2975]

Latency: it can be caused by a plugging as well. I figured out after it was working well and then had the latency.

[@escapologynqy]

great video. I find the advice arount latency particularly useful. However, I still get some stuttering with my virtual drums when trying to record and cant figure out if I should aim for low latency or if a higher sample rate woud help. Any advice?

[@ft.galpardo5081]

Hi, I have a problem where monitoring through Studio One sounds great, but when I'm listening to something I recorded it seems to go out of sync with the tempo of the project, and I'm positive I know how to play on time. I doesn't sound like someone who don't know how to keep time - it is slowly getting out of sync with the tempo. like the recording itself got slower... I thought it had something to do with the latency settings but maybe not? Can you help maybe? Thank you a lot.

[@lochbeastie]

Hi Joe, I recently purchased the PreSonus AudioBox USB 96 bundle pack with Studio One, speakers, headphones, and microphone. I have the Studio One on my laptop using Windows 10. I am completely new and I have gotten as far as having everything hooked up and recorded some test vocals and guitar. One of my questions is, how do you listen to playback thru the 2 speakers so all can hear instead of the headphones? Thanks & have a great day!

[@billyfreeze1893]

will my old version 6/8 interface work with new MacBook Pro USB C ? THANK YOU

[@dylanevans7348]

Fantastic video yet again. Quick Question - is it better to use studiolive console as a audio interface with USB or Ethernet?

[@presonus]

USB - Joe Gilder

[@RichardJoeLeonn]

Can I use this interface studio 1 and my Audiobox to connect to my computer through my 16 channel Amnoon mixing board then back to my laptop

[@dannywinters2905]

What if your not getting any audio in at all? I just followed exactly what you said.

[@evanmeirweber]

im on studio one 6.5 (demo cause i cant find artist) and its not letting me click the record button

[@cavj1111]

How come on my Audio Device preferences I only have "Audio Device" and not an option for Record and Playback device? Right now I can see signal at the meter but nothing coming through the speakers and when I trim the gain up I don't see any difference in the audio level. I'm missing something here...

[@Alex-uy7fn]

mine does not let me mess around with the device block:( any ideas how i can edit it?

[@bandatiwob5536]

Joe you are the top. Thanks for the tutorial and tips

[@ordreancien]

Many Thanks ! The Z under the main output changed everything for me !

[@memoriesoftheshowroom1171]

When I click record enable I don't get he green bar. and when I record no sound is going through, my inputs are correct

[@ssbyoungquan4056]

It won’t even let me change the block size it’s just greyed out

[@pambeesly3311]

Hey why does my input say left or right only it doesn’t give me the option of input one two or three.. I’m completely lost I’m trying to learn how set up my microphone I’m not sure if I need more cables or what’s the deal can you please contact me back please

[@presonus]

In the mixer, click on the "I/O" button" and you can set up and name your inputs there. - Joe Gilder

[@amanofconviction600erodedo5]

Hey I have studio 5 professional through the Presonus sphere. When I go to audio set up under audio devices I do not have playback and recording device why is that? Is it because my interface is the USB audio box?

[@erhanmusician]

Is it possible to set layers to be placed below the present layer when the expand button clicked, so that it always reserves the top one for the "destination/sum layer" like in Cakewalk?

[@presonus]

Yup. That's how it works. You just need to create an extra blank layer and make that the active layer, then everything gets comp'd to that layer. - Joe Gilder

[@TY2CD]

never knew the auto punch and pre-roll function. Great.

[@presonus]

👍 - Joe Gilder

[@Medzk1]

I can hear the sound through the monitors using my scarlett 2i2 but when I hit record it does nothing

[@kenodabo3171]

I'm recording music from a cassette (old radio show) but the volume is to high on my tracks left and right. When I go to the mix section and see the faders for the tracks and try to pull them down, nothing happens???? how do I lower the input volume?

[@benpedersen6751]

i'm having issues adjusting the latency. for some reason it will not let me adjust the settings you discussed. they are there, but they are greyed out and I cannot change them

[@melokidbeats]

Dude you are a wizard 🧙‍♀️🔥💪🏾

[@geraldbrown9279]

Joe I tried to record a download vocal, spoken word, and I added two loops each on their own track. I hit record but I only hear one track the other two seem to go blank and I have to hit undo record for them to come back. Why is that? And how do I fix it?

[@GuamSawyer]

i have a Scarlett 2i2 is that fine?

[@featuringrageyt3103]

What about if I’m using Studio one Artist? Has different settings from your video I’m using Presonus Bundle and interface mic i don’t much about studio one

[@donaldburns4462]

I need to setup 32 tracks on my studio 1. Do I have to setup tracks one at a time.

[@nwcic]

Brand new to Presonus today, migrating from another DAW. Nice TUT. LOVE tuts that cover items quickly and clearly. Thanks very much Joe.

[@FmiAveezy]

So my studio one is no longer letting me hit record or make the record button red any idea what’s going on?

[@LordRookie09]

BROOO can we get an updated video this program seems to change too much over time. PLEASE SEND HELP!!

[@mcadder]

I can't find the Z-button. Is this because this is an old feature that is gone in 6.2?

[@louiewgroenewald]

My computer Sspecs is more than double recomended for S1 Pro. However certain vocalist preferto record wth a vocal chain. This causes dropouts, but only sometimes I would say 1 out of 10 recordings using same plugins in chain as well as main out. The "Green Z" will cause these plugins not to work properly, having the effectof my vocalist not being to happy while recording. Also going from "minimum" to anythhing more still causes some slight latency while on buffersize 64. block size samples. I used to be able to record perfectly with these settings and vocal chain but for some reason the past few weeks I get drop outs, which forces menow to go to to at least 128 block size. At 128, I can start hearing some slight latency. Almost sounding as If there is a double track runing together with the main vocalist while recording. Nothing changed except 3rd party plugins in chain that updated to latest versions. I also use mostly native stock plugins, wwhiich make up about 98% of the plugins i use. I would like for evrytning to work as before where I recorded 1 vocal track with one instrumnetal and my vocal chain at 64 block size and "minimum" under the processing. Can you help?

[@thezendaddy]

My device doesnt show the recording device options

[@briankruesi6484]

Wow this is great. Don’t use Studio One yet but this was very helpful.

[@iamtheimagedoctor]

There seems to be no way of punching in (while hearing the previous track up to that point) and still recording while monitoring plugins. EX: I'm trying to record a guitar while monitoring Ampire with some distortion. As long as the blue monitor input button is on I'm fine. But go to punch in. I need to turn off the input monitor so that I can hear the punch point but now loose the Ampire (channel plug in) effects on the guitar. After much experimentation I found that if I record the guitar on 2 tracks simultaneously with the same plugins and keep the input monitor on for one track and off for the other I can get my desired end. Seems like the long way around but it works. Any other ideas?

[@DarioSantaAnnaOfficial]

hey man, big issue here, got studio one, but i import my audio and press play and nothing happens at all, do you know waht that could be?