How to Export Your Song in

WATCH ALL STUDIO ONE WITH JOE GILDER VIDEOS: • Studio One with Joe Gi...
PRESONUS SPHERE: bit.ly/3zku0vN
STUDIO ONE: bit.ly/2Tfygx0

[@charlesdufrene6244]

Awesome short video, Thx Joe! I've been unable to find a tutorial anywhere until I found this one.

[@yousemusic1025]

Right on the money. So direct. Thanks, Joe.

[@michaeltablet8577]

Thanks again Joe and Happy Thanksgiving!

[@tupaigenebula2226]

when he said, it sounds good in studio 1 but not the same after export, i knew i found the right video. Thanks

[@corrindion]

Excellent explanation! Thank you!

[@arlene7323]

Thank you, your video helped saving me a whole lot of time!

[@parodiaspopxd4672]

dude you are a life saver ,thank you so much !!!

[@DeltaWhiskeyBravo13579]

Excellent info. I needed to find out how to export files. Now I know.

[@RuthRaubertas]

Thanks, very good explanation!

[@Bigiceberg756]

Thanks for the info 👍🏿

[@Airtouch67]

That's funny, the reason I clicked on your video was to learn how to use the "loudeness" part of the mixdown box, lol - you said, "you don't need to worry about that." There are A LOT of options there! KZbin, Apple, Amazon, etc., I have no I idea how to use these properly.

[@QR_Code]

yeah, this is simple stuff but definately good tips.

[@DerekPicard]

Great video 👍

[@vlkn.music.official]

nice mate,thx a lot>

[@natmarie6450]

Thanks so much 🙂

[@brettmarlar4154]

I was hoping this would explain how to send a song to someone else for mixing. Not that I would need to do that, but there might be those who would.

[@selah_benjaminb7990]

There is a way to do that a couple of ways! You can use the workspace, which is if the person you are sending it to also has Studio One. ( don’t quote me on that) But then in the Song tab under mixdown you will see export stems. From there you can add to a folder and zip it up and send it out that way! Hopefully this helps!!✊🏿✊🏿✊🏿

[@bearingcee]

If you haven't already, check out the export stems video also produced by S.O. and Joe.

[@davidreidy5750]

oh my goodness I needed this I have a bunch of mixdowns I need to put into wave files to possibly burn on disc , mp3 or both?

[@anievestor]

Joe quick question. Many times I just start a song in SO and then when I am going to do what you did in the video. The end marker is way to the right. I have to drag it over and it is a pain. Is there a shortcut to get this done? I know I should be paying attention to the setup page but I am not. That for a great video. Cheers Tony

[@ciryboy2]

thanks

[@thealphawolf953]

Thank you…

[@PhoenixFlowq]

😁😁😁 thank u

[@kevindermotodoherty5312]

This method don't work - there's nothing to show in my export folder!

hi, thnx for this video but what about loudness settings?

[@ReydenProducciones]

When will they resolve the compatibility between iZotope RX 10 (connect) and S1?

[@princetheelegendmusic]

How do you approach Mix Volume leveling?

[@79Torstein]

Hi, thanks for great video’s. Hope you Are able to answer a question. When i export from studio one i get double vokal. I dont understand why. I Even trye to delete my vokal track but the vokal is still on my export file. But when i play it in studio one its only one vokal and no vokal after i delete the vokal track.

[@johnthompson3856]

How you zoom in so quick to your tracks?

[@GonsolGroup]

Hi, I'm looking into changing to Studio One. Would I be able to export INDIVIDUAL files on the timeline as mp3's? Do they keep the names of the individual clips in the timeline? We do a lot of IVR work and sometimes we have up to 400 short files, already named, in the timeline we need to export as mp3's Thanks!

[@IamGrantt]

should i ever mess around with the resolution or sample rate for waves?

[@lXsickoXl]

I can't figure out how to set the marker, I wish this program was simpler cuz it's impossible to get any questions answered

[@GTDami]

Anyone know how come when I export channel stems (from studio one 4.6 into 6.0) the imported wave files sounds like white noise when I playback? (Impact kit and GGD drums)

[@dacharlesx]

Hello everyone, can you help us understand what option or options to correct mixdown exporting raw without effects ( in this event effect: OPENAir inside the sends channel)?

[@erfanmazidi345]

How do you zoom in and out?

[@winterheat]

is it true that the Demo version (v6) can only export 30 seconds? I don't see a Start and End marker on the PC like you do, and right click on the timeline and select Start and another place for End did not work... By the way, what is File -> Convert and use aaf... no program including Login Pro can open that file

[@KillNeckRiff]

I record 2 guitar track panning with left and right, also tom and floor panning it stereo mid left right, and export it to MP3 , but when i transfer it to my phone via usb, sound very bad and my panning not influence like what i do on my mix. Any solutions??

[@bardurlydersen1444]

Export mixdown dos not show in my studio one??

[@ehdforlife]

What is an ideal drum level for a mix down? Do you ever turn up the overall mix on the master before export? What should the overall master track volume be?

[@hsn10]

depends on target platform

[@marcotrosi]

Hi Joe, I created a FeatureRequest some time ago and I want to ask for your opinion and everyone who reads this comment. in the Export Range section I want 2 more features. 1. I want an automatic markers called "first sample" and "last sample". StudioOne can know when there is no sample played, so we could have "markers" only existing in the Export Range section (not on the timeline), that are placed at the first sound/sample that is coming and the last sample. This is not my idea, it's from another DAW. 2. I want an Offset value that I can adjust separately for start and end (not start and end marker, but generally start and end of song, like in feature #1 first and last sample played). The offset value shall be configurable to positive and negative values with this a new default setting could be created e.g. 300ms before first sample and 2 seconds after last sample this should give a great default value for 80% of the use cases without the need to set the start and end markers manually.

[@lordberly]

agreed, especially on offset values

[@DJV0ICE]

hello i was wondering sometimes i get a clipping error saying it 5.00 db over or something what actually is that?

[@KayaSun]

What you say here is very true, but why do I hear the deep sound differently after exporting the wav file with DAW (Studio One 6.5, same sound card (M-Audio), same headphone)? What am I doing wrong?...

[@ChintyaDe-kw9gx]

Hi, Joe. I tried to export mixdown like you did, but my Studio One 6 kept adding extra "- Start 01" to the end of my file name. Do you know how to fix that? I've been searching for tutorials on that, but haven't find any. Look forward to your reply. Thanks 😄

[@athuairush235]

Hey, Joe, My mixes are sounding great on the song page, but the mixdowns sound far worse after exporting...I'm bringing in the exported stereo file to same session (checking import to track @ mixdown) & hearing apples to apples...Everyone says mixdown should sound same as mix, especially in digital...Can you think of any settings or overall suggestions that can help get the mixdown sounding as good as the mix?...It's frustrating to do so much work, & then the final stereo file isn't representative of the mix!...Thanks so much & any & all help w/this would be greatly appreciated!!! p.s. I'm exporting to stereo wav file to same spec as mix is in (44.1K, 32-bit) or taking the bitrate down to 16, but that shouldn't affect quality this much, to my knowledge...I generally use UAD plugins w/some Soundtoys & a few other things...I use a 2012 MacBook pro w/Studio One ~4.6 & a UAD Apollo interface...The mixdown just sounds way more squashed & less vibrant & vital than mix (all same plugins, settings, etc)...I'm wondering if Studio One &/or my computer can handle mixing (summing) all that information down properly to one stereo file?...Thanks again & hopefully you can shed some light on this! Peace!!!

[@athuairush235]

not sure what this is ⬆? it just took me to a KZbin page w/no content. Confirming this is you, Joe? thanks!

[@somyrapoacelli1560]

I can’t find it

[@poorhouz5051]

Mannnn you never showed us where to pull it up at. Downloads files etc.. I don't see mine for some reason.

[@user-iv7zp6kw9f]

Hi bro,I try to export mixdown to audio but it says clipping has occurred,the signal was 0.80 over what's wrong bro

[@drumseltzer]

My exports come out with no audio, what am I doing wrong?

[@fadisoueidi4127]

hello. anyone knows how to add a thumbnail to my wav song?

[@havemoney]

Hi! Make a transport bar on top of the windows (optional). I don't want it to hide under VST.

[@havemoney]

likes, let them see

[@dannytwork920]

Joe, I am 72 years old and just started with Presonus after I asked Bobby Holland what new DAW I should get. I would be totally lost if not for your videos. from time to time if i cant find my problem in your videos. I would like to contact you.

[@viratrathore2166]

Sir how to cancel my monthly payments on presonus Debited automatically every month

[@JT-hi1cs]

I’m considering making all my album songs in a single file. Is that a bad idea?

[@dezyLmedia]

If you're meaning to master a whole album in a single project - nah don't know about that one, plugins will chew up quickly if you aren't mastering lightly. If your tracks are done and needs light tweaking - Why not? If you change your mind you can always chop them up and export them seperately later from the full file, assuming you're using a lossless format and don't add more dithering.

[@artist1303]

I do a print track within the session then I export just that stem. How does my way compare to your way?

[@adityakmr1361]

In the way shown in the video it just exports a consolidated version of your mix as a whole with whatever elements it had at the time of exporting. However your way allows u to have more "real-time" control. So let's say u are printing and u realise something needs to be changed, u make that change and resume printing from that point on hence effectively implementing your change. In the way of thr video you'd have to make a new bounce for that change to come through in the exported stem. Hope this helps!

[@artist1303]

@@adityakmr1361 So there is no sound difference in exporting the printed stem using export stems vs exporting the printed stem by using export mixdown?

[@adityakmr1361]

@@artist1303 Yes there shouldn't be any difference. If there is then you may want to go over your export settings in both instances to look for any discrepancies

[@artist1303]

@@adityakmr1361 Thanks for the quick response to my question. Happy Holidays

[@countyboyzproduction3620]

Hey Joe when I go to export my song it's only letting me export 1:01 mins instead of the whole song any suggestions

as in video, open marker section, fix your start end markers position to start / end. while exporting, choose right side "between song start end markers".

[@SintusUmaIkun]

Oky

[@fabiantitus]

is it just me? but after spending hours on my mix when I go to export my song it always has audio dropout all over it and no matter what i do nothing changes.

[@fabiantitus]

and I've the volume changes that was not in the mix, after exporting my mix , someone please help

[@winterheat]

you need to click that tiny thing for the Start and End to show... why not make them show up to begin with? Elon just came back from Mars and he knew how to use it though

[@gabrielapodaca1102]

bro joe. the piano roll needs a range tool