Good video nice explanation. I will say this, that if cars had come with Presta valves, I might not have been a car mechanic.
@CiscoPhipse3 жыл бұрын
Much better than the last 2 videos I came across on KZbin. Thanks
@dawnh.prince13833 жыл бұрын
Finally after two days of searching. I've got to see the one video that I needed. Thank you.
@Andrew-cu9lf3 жыл бұрын
To the point. Not a lot of extra stuff I don't need to know. Excellent. Thanks.
@mbords012 жыл бұрын
Okay, young lady, your explanation on Schrader valve is super good news; now I need to check my air compressor or I need to go to gas station to pump air to comfort bike. Road bike is no problem!
@JoeyIngles2 жыл бұрын
Thanks for the straightforward explanation. 😊
@thomasmedeiros57222 жыл бұрын
I would add that when you have a tubeless set up,you should check the sealant level about every 3 months. It tends to dry up over time. On average you should have 2-3 ounces in a tire depending on tire size. On mountain bikes you can run lower tire pressure and not get pinch flats that happen in under inflated tubes. Lower pressure gives better traction. On road bikes tubes can be more challenging because the rim is very narrow so breaking the bead to get the tube out can be challenging. We change tubes on a wider Mountain Bike rim in about 4 minutes on the trail. I spent 15 minutes and broke tire levers changing narrow road bike wheels. For occasional recreational riders tubes are the way to go for sure. I always carry a spare tube even when I ride tubes. I have had glass put a half inch gash in my tubeless tire. Sealant woks great for small puncture.
@rickclark37442 жыл бұрын
I find that shrader valves are more user friendly, if it works on car tires well that should speak for it self.
@ThomasChristensen-xd9zj4 ай бұрын
Thank you!
@markymarknj2 ай бұрын
Ma'am, with modern metallurgy and manufacturing techniques, the thinner hole a Presta valve can use is less of an advantage. Decades ago, the smaller hole was important on road bike wheel rims; now, with modern metallurgy, this is less important. Two, you can deflate Schrader valve equipped tires. The women out there can use their longer nails. If you don't have long nails, then you can use the little stud that's often found on tire pressure gauges; if the valve cap has a pointy shape, this can be used too. Three, one can use a Schrader valve on a wheel originally designed for a Presta valve. How? Drill it out! Four, I wouldn't recommend installing a Presta valve on a wheel originally designed for a Schrader valve; even with the locknut, the valve can move around the larger hole. Five, both Presta and Schrader valves are sprung; i.e. you have to depress the valve to release air. Finally, there are some long Schrader valves out there; they come on inner tubes or as valve stems for tubeless tires.
@Fredengle9 ай бұрын
Also I have never seen a fire extinguisher that had a presta Valve they are always the Schrader type .
@simongee89283 жыл бұрын
Useful point, when you're a out to inflate a Presta valve, unscrew the wee nut, then tap it to release the pressure as they will self seat due to the high air pressure keeping them closed.
@estebanlopez92362 жыл бұрын
But why do i rescrew the nut after inflation and the air begins to release ?
@Fredengle9 ай бұрын
The difference?? there is no character named Presta in Breaking Bad !!!
@aodh59662 жыл бұрын
Presta valves are too fragile. I've got 2 flats just trying to pump them up. I think I am stuck with my crappy valve now 😞 RIP if I ever get a flat on the roadside
@davidhoxter Жыл бұрын
Your not stuck. Change the rims or the cheap way is to have the holes drilled to fit the Schrader valve.
@aodh5966 Жыл бұрын
@@davidhoxter thanks for the advice, I'm accustomed to them now I was too rough with them!
@joseconejo53382 жыл бұрын
I see no pont to this valve in order to use it you need an extra piece and the piece at times gets stuck in the extension making the filling of air in to a inner tube that much more difficult
@WorldravenNevar2 жыл бұрын
I shit on presta valves
@64maxpower2 жыл бұрын
Schrader valves are used to signify who is a dweeb. If you use a Presta valve you are a Cool Guy. If you use a Presta Valve you are a dweeb. And that's that
@davidhoxter Жыл бұрын
Dweebs unite!
@64maxpower Жыл бұрын
@@davidhoxter I think Dweebs are kinda united now.
@14lexquez Жыл бұрын
Dweeb forever 😂
@64maxpower Жыл бұрын
@@14lexquez I don't really mean it. I'm just talking poop