Schrader Valve Ghetto Tubeless

[@rterry2752]

Using an adapter on a presta valve to fill a TON of air into the tire while doing a tubeless set up is a PAIN IN THE ASS. That schrader valve stem for tubeless is a god send ! THANK YOU !

[@1jenscott]

Love it! I've always hated Presta valves so I'm going to convert just to have the Schrader.

[@mcduffrobert]

I did my first tubeless conversion last week. I dry fit the tire,pumped it up with a floor pump and it set the bead. So I let the air out , bead held, and put the sealant thru the valve. I couldn’t believe how easy it was, I heard horror stories

[@tizben]

Very lucky! I gave up and bought a compressor on sale. But I got 3 bikes all tubeless

[@MCMTB]

So far I haven't used my compressor on any tubeless stuff yet

[@MaYbYl8eR]

i just had one of those horror stories last night. which carried into this morning. it mounted though

[@boracay12]

Sounds crazy but works great . Spray some starter fluid ( like for Diesel engines) a short spray into the tire . Throw a match . It ignites . Blows the tire up and into the bead . Then fill quickly . The fire sucks up the air and deflates it . 1st time I saw that was the mechanic putting a backhoe tire on the rim . I used it ever since . Motorcycle tires , lawnmower tires etc .

[@jerzemmanuel9458]

Inner tubes smells like fish😂

[@Sr89hot]

Jerzem Manuel yep I tell people that and they say I’m crazy.

[@parkerlovell1675]

A tip for converting non tubless rims to tubless is you double wrap the rim tape to get the extra width so you have a nice seal beetween the tire bead and the wheel

[@EveryTongue]

There’s something so cool about a Schrader tubeless setup

[@boredmechanic2019]

GREAT JAY-OH-BEE Master MC... yeahh boy.. you got 'em . Gorilla tape; Stan's brand sealant and schraeder valve... you got it. excelent . Great info. Thank you for sharing .

[@MCMTB]

Thanks Bro :)

[@ijasibrahim3567]

@@MCMTB bro

[@MUTP-zq1oc]

Did a ghetto with the ground control flak jacket. Just put more rim tape to thicken the bead area of the non tubeless rim. It will work, but is a tough job. Needed a lot of soap and water.

[@volcomchristo]

How did it hold up ?

[@MUTP-zq1oc]

@@volcomchristo held up like a champ. Hard to remove the tire after a puncture though. Of all the luck a cow horn protruding from the dirt.

[@bernardmiranda4051]

Schrader is much better than presta, very much universal and tougher, less problem especially when pumping air, in gas stations, no need for adaptor, great video very informative, stay safe. 👍

[@hellosunshine1090]

Wrap a tie down around tire circumference to force beads to tighten / move outwards. Spay soapy water generously around both beads and hit it with a medium blast from any compressor. My Ryobi 18v One Gallon tank works fab for this - this method is legit on every FAT or MTB tubeless conversion I've tried.

[@Pillokun]

The mounting of the Michelin tire was piece of cake. Try out org UST tires on an UST rim... I managed to break at least 5 pretty expensive tire levers and still the tire wasn't in correct place on the rim... UST was horrendous to mount but oh boy did it work wonders in the woods with super low pressure and you did not need to use any sealant at all. Even though my rear started to leak after 5 years.

[@markburns4777]

With car tires if you can’t get it seated you can use a ratchet strap or even some rope with a stick twisted in it to press in the center of the tire to force the sidewalls out so the bead seats. Seems like if you have a stiff enough sidewalk it should work with bikes as well.

[@kaceynguyen2873]

Dude, love your videos man, learnt something new every time. Good job, keep it up.

[@DeeJay_Rides]

Did this 3 years ago with stock Weinmann non-tubeless rims and wired WTB Vigilante 2.3s and Schrader valves. Worked like a charm but i could be better if I used legit sealant intended for bike use. I used the cheap sealants from local motorcycles shops that almost doesnt work LOL

[@alfredozapata7663]

I did almost the same thing to my pitch comp1x. I just cut out the valve from the inner tube and used the same tire on the wheel. But I think your way was an upgrade from what I did.

[@manuelmtgful]

hi alfredo, u use the same tyre , ground control ? and fit well ? have any problem in this time with that tyre? i have a pitch to with that tyre ground control like the video.

[@alfredozapata7663]

@@manuelmtgful yeah same tire. I used gorilla tape to seal the holes of the spokes and then filled it with stans tire sealant. Then I used an air compressor to fill my tire. I also pulled the edges of the tire closer to the rim, so the bead can catch on the rim. And VUALÁ!!

[@JuanandKharlMtb]

Cool setup, pang bakbakan na sa trails! 💪😎 very informative.

[@MPVBullet]

Nice DIY erp...man, this vid made me go back and tinker on my old cannondale 29er.

[@james-hb5tu]

I don't think they should make a dad bod shirt in that size haha

[@LukasEkers]

6:18 You can actually get loose tires to seat but you just have to put the wheel down and focus on pumping as fast as you humanly can (might not want to show that on camera though).

[@ns671fr]

And pulling the tires out on both sides towards the beads

[@LukasEkers]

@@ns671fr tricky but helps for sure

[@ajmckay2]

I did this - I tried gorilla tape and gorilla tape clear. Both tapes lasted about 2 months for me but then failed so ultimately I went with proper rim tape and that's lasted for much longer. IMO worth the hassle of using the wrong product.

[@smayberry87]

The fish smell is from ground up fish bones inside the tube, to stop the tube sticking together. That's why if you cut open a tube it seems dusty

[@greggygohome1451]

Innertubes Smells like A Dead Rat for me AHAHAHAHA

[@peterlang5047]

That’s not ghetto tubeless. That’s legit tubeless

[@victoriathegreencheekconur5477]

Nah it’s ghetto cause it’s gorilla tape and shrader

[@Wyatt_Ali]

Ghetto is inner tube rim strips, gorilla tape, valves cut from tubes, etc

[@TyrannoKoenigsegg]

Noice. Mines using presta valves and since I'm also a roadie I can use the old presta valve cores in case my others get damaged

[@bertongputik7342]

nice idol..nice vid. tagal kong dna napapanood ang mga blog mo.. nakaka ingit nmn bike mo... hehe.. herap ang maherap talga...celphone na nga lang dpa makabili...kaya sa comp. rental nalng..makapanood ng mga blog. mo..ingat lagi...ka erp.

[@huskerfan3352]

Specialized really needs to make their ground control tires tr I have like two pairs from old bikes and I wish I could use them

[@Hoosieroutdoor1969]

Just bought a set of Specialized tires, ground control for the rear and fast trak for the front, both are 2bliss ready(as they put it)

[@MaYbYl8eR]

you need an air compressor. bet that specialized would have mounted right up. never could have mounted my ust tire on my ust rim

[@aneudyfernandez681]

It does smell like weird stuff lol. I think u are some tipe of McGyver good job..👍👍🤜💥🤛

[@ninjaplease123]

I love your channel dude.

[@mathew_chank]

You deserve one million subs

[@neildelosreyes8353]

Hahahaha pampa good vibes ko lagi panonood sa channel mo idol 🤣💪

[@carlodominiclu2609]

Nice procedure.

[@JaidervillaTV]

I think about weight that the tape you used it’s very heavy, Thanks for your videos

[@ofwbikers3574]

Yown may pag asa na pla ma tubeless ang rim ko na shrader valve ang butas....salamat erp...meron ba sa amazon nyan

[@MCMTB]

Meron bro search mo lang tubeless schrader

[@Musterdavid85]

i used an automotive schrader valve and worked perfectly, just need to cut some rubber

[@jamesmathews243]

You lost me with the natural light hahaha

[@MCMTB]

You know it 🤣

[@joaoc_PT]

Presta is way easier to fill up tire, with smaller pump and 1 gram plastic presta>schrader adapter would've fixed it ;) Yes, old air inside tubes always smell like fish, over 30y smelling bike stuff

[@boracay12]

Hmmm tube less .idk . I cut a old tube down the middle and inserted it between the tire and tube. I have hit a couple of jagged little rocks they use here to fill holes in the road and so far it's holding up . Worth thinking about though .

[@ΘάνατοςΧορτοφάγος]

I'm getting some care tire valves, also schrader,

[@anaknimangkanor7854]

The rim was Jalco if its from Specialized Pitch bike

[@kenthix8702]

My specialized pitch came tubeless ready

[@Yuu_Amazawa]

I totally can relate to the fish smell of innertubes

[@Jhoms-xz9ih]

Yes i smell the same thing too sir... I tought there is something wrong with my innertube....

[@pagenaglamyerdatv6489]

Nice build time new shaved erp..like the shirt men but it doesnt significe you,skinny erp lol..✌💪

[@oravplays7371]

Wazzup erp from Philippines again 😂🤣 Bagong upload medyo madagaldagal naghintay pero ok lng

[@---GOD---]

We need more quarantine entertainment

[@hellopsp180]

you should have done this outside man :D lol your floors T_T

[@ChiefManny1]

Gorilla tape makes a 1" wide tape. Cheap at Wally $3. I used to see a 3/4" at ACE True Value but last time I checked they no longer carry it.

[@dantribby199]

The worst is a fat tire bike. Nightmare to set up tubless if the rim profile is boxed vs V shaped. My 80mm Kona wheels are a pain to set up

[@VencedorGamer]

Good to know, I'm tired of replacing inner tubes, and don't feel like paying $60+ for each tubeless tire.

[@kiankapil]

Dude wtf you just demotivated me with that double wall rim stuff and I've been working on this for 2 days.

[@MCMTB]

Send it dude

[@gahlabradortv]

Ayuz erp naka tubeless na si Specialized

[@solobikerrider3055]

Ayus Noy. trails n yan. Godbless and Ride Safe Noy

[@jeffreyngo9097]

Yea double wall rim and be shure your tires are tubeless ready. If not, It don’t work

[@edmmaster8054]

Yes innertubes stink worth the old air 🤣😍🇬🇧

[@vcmtbpinoyito]

Yeah i used the Gorilla tape before they work good bro👍

[@budgetking2591]

You can make a compressor out of a 10 usd garden sprayer

[@jeffbuchanan4213]

Great video! what size mm Schrader valve did you use?because there is a few different sizes. I have a 20x4.0 rim for a fat stroke tire but don't know what MM valve size I need.

[@spacecalander]

I would not call it ghetto, my specialized pitch came with tubes that were threaded tight to rim, made for easy filling when pressure was low. When i went tubeless i used shrader valve stems, just easier and fit my pump i have mounted on frame.

[@robinjhoesigno9416]

That is so nice... Saw ur vid converting the Specialized to 1x8 thats nice also... Question... Can you make it 1x10?...or the rear hub can only use 8 speed cassette?... Thanks...

[@purplegarage05]

Most 8 speed freehubs can fit 8/9/10

[@MCMTB]

Trust me I will shove an 11 speed cassette on it

[@MCMTB]

You can fit 10 speed cassette in it

[@jorges2000]

Great content. Just subbed. Keep up the good work. 👍🏻

[@xhrissorange4254]

Muy bien..... Sin tanto merchandizing

[@goldenmtb]

Ayus! Gamitin na!

[@Markchance08]

Swak na swak sa XC trails Dito samin :)

[@sonnyjdayrit5564]

Looks easy to do 😂

[@werhwert8656]

Frame is all I had haha... Wish i could buy equipment to make my own mtb

[@funnytv5770]

Sir how much po ung Schrader valves na stans salamt

[@jpreorizo2334]

Ganyan talaga pag hindi tubeless iba ang amoy😂..pa shout out po

[@simonlamothe9654]

i have the same bike... the stock rims r tubeless ready

[@patrickocon833]

Wondering what sealant smells like

[@Raxters123]

okay na sana pero nong nagsabi ka na yung presta nozzle bka madali ng mga kahoy sa trail, bakit wala kbang cap nyan,

[@Bryeezy009]

Im sure this is going to be on the pitch. What’s the max size tire can I fit in the rear? Can someone help me? Idol Mark?

[@kristoffervergara1982]

Erp...may explanation si GMBN kung bakit amoy FISH...hehe

[@victorpopescu4349]

Nice tip.. i wonder if i can do this on my 2015 Pitch Sport.... can you tell me how wide are your tires? Mine are 2.4 in front and 2.2 on rear. I think that i will try to go tubeless. Of course, i don't have the original tires ( Ground control ) , i have a pair of Continental Mountain King.

[@MCMTB]

The only way to figure it out is to try it

[@JR-ke4lj]

Can u tell me on long term if this tubeless conversion holds the air? I have the same rims and I thought they are not tubeless ready...

[@ns671fr]

Just has to be double walled thats basically how tlr wheels are

[@josenacino8326]

can't find any stan's tubeless schrader valve here in the Philippines.

[@MCMTB]

Try mO sa Quiapo Erp, or as Lazada shoppee

[@hellosunshine1090]

Better sealant than Stans: 1 Part RV Antifreeze solution 1Part "Mold Builder" liquid latex 1 Part Slime tire sealant Make a gallon for less than quart of Stans. Won't dry out & form "Stanimals" - those dried latex boogers, lol...

[@pauventures1034]

Very informative!👏

[@MykelSacularVLOGS]

Yes erp ang baho ng amoy pag binabawasan ng hangin

[@EAApril]

Gorilla type is sick

[@dmac5678]

I have a question I got a used mtb. All tubeless. The front tire is flat and when I checked there’s a lot of sealant dried up on the inside, resembles a “booger” texture. Can I add sealant over this?

[@MCMTB]

Yes

[@kennethalban4382]

Cool tires😎

[@franciscocallchicopaco389]

right, now I understand.

[@jamescarter26]

Have you try tubuless rim tape from aliexpress?

[@Hubs98]

Yun oh...thanks erp✅

[@ricardoalves8313]

When the sealant dries you have to take 1 part of the tyre apart right?

[@purplegarage05]

You can make a presta valve fit in a Schrader hole by cutting down a valve cap

[@Hlidskjalf6698]

Try making the tape thicker for the non tubeless-ready tire to work..

[@chuchu00y]

Greetings, hey, do you think the hub is compatible from 9 to 11sp but on a road bike?

[@MCMTB]

I don’t think so my friend

[@rodelmaberit5086]

Is there no schrader rim that is tubeless ready on the market?

[@7hc1312]

true my inner tubes smell bad too

[@fencezsmilk3814]

gnda ng rim mo erp masyadong wide ..i think 38 to 40mm wide yn

[@echoko264]

How did you do it?

[@Yuhouo]

Does it really guarantee kuya? Will it work for any type of rims? As long as its double wall? I have here a Mavic XM 119, I guess? 😅😅 Double wall ✔

[@efraimdevivar8466]

Double wall po ung specialized pitch? Same tayu ng bike sir

[@MCMTB]

Yes double wall

[@andrewdiestro5907]

Nice content erp!

[@YoBoiCoCo]

Good luck with getting it out of your rims when it gets in there

[@bigsqualor]

? Is there any truth to this?

[@georgeanthonipillai1952]

Werid question but could use glue

[@ethancosnett98]

hey bro, just so you know, with those rims you can change it to presta and it works well

[@mathew_chank]

How

[@shaanrakhra5483]

@@mathew_chank by drilling out the hole

[@timothywewege6651]

I always get that fish smell aswel,i wish someone could tell me why that happens

[@franciscocallchicopaco389]

you can do it on a single wall too, I guess. why not?

[@MCMTB]

No

[@francislacdao9661]

Pre its very expensive that shreaded valve stan tubeless valve. Do you have extra hahaha