Prevent DAMAGE! Humminbird 360 Mega Imaging BoatLogix 360 Mount

[@vinosfinostapasandwinebar5109]

You did a nice job showing the install. Thanks

[@MoneyBass]

Thanks! I checked around and could find an installation video. Hope it helps.

[@mikedaley2882]

Just bought one. Never seen it before. Good video

[@MoneyBass]

Cool. Thanks for watching.

[@graceabounds2381]

Thank you so much for doing this!! We are installing ours now, God Bless

[@MoneyBass]

Thanks for watching. I really like it. Glad I could help.

[@johnky100]

Interesting. I know this helps stabilize the 360 but having it connect directly to the TM shaft, if you hit TM motor hard and it flexed.....wouldn't it break the 360 shaft? How has Ben your experience? I only asked because I was looking up a similar product, AMP 360 brace or sum'n...similar to this one. Guys had their 360 shaft break because the TM shaft flexed and broke 360 shaft from the attachment point.

[@MoneyBass]

I haven't had any issues with the installation of the support bracket. I would ask what did they do to cause the trolling motor shaft to flex enough to break? Sounds like that was "user error". There are plenty of ways to accidentally break items on boats but I try to make adjustments to my routine based on the equipment I have chosen. I've heard that installing a support bracket could void the warranty so it's best to consider the pros and cons of any accessories added to your boat. Hope that info helps.

[@donfousek379]

Thanks for checking with Humminbird. When I did I get a different answer. Sorry for the confusion. I have ordered the same one. How do you plan to mount the mega live? I saw a couple of video’s where they mounted it to a Separate stick beside to 360.

[@MoneyBass]

Thanks for the clarification. I cant find our original post. I will mount it on the trolling motor first then decide if i will mount it separately. I would like to be able to use spotlock and still use live imaging without it limiting the use of spotlock.

[@j.p.thagard335]

Great video and product

[@MoneyBass]

Thanks for watching and supporting the channel.

[@joeyTR21X]

Great video. I been wondering when you was going to stabilize that unit. I meant to say something about that a while back. You beat me to it.... lol

[@MoneyBass]

Lol, yep, I was going to do it a few months back. I was procrastinating because it's a little expensive. Glad I got it.

[@joeyTR21X]

@@MoneyBass now I'm wondering about the mega live deal. I have one preordered just waiting on it to be released. I just hope its worth the wait. All that being said I'll have a small fortune in electronics when it's all said and done....just for a freaking bass.....guess I'll beat eating bread and water for a while.....lol

[@vrt1032]

Nice video man, thanks. Bought it

[@MoneyBass]

Cool. Check out my video about the troll Tamer also. Thanks for supporting the channel.

[@Fshnfool]

Video was very helpful thanks

[@MoneyBass]

No problem. Thanks for watching. Be sure to read some of the additional comments. There is a debate whether it may void the warranty. The pros out way the cons for me. Thanks for supporting the channel.

[@tmadkour]

Does the bushing make any noise when the TM spins? Does it leave any scuff marks on the TM shaft? Do you know if the bushing spins on the shaft or inside the mounting bracket? Thank you in advance!

[@MoneyBass]

Great questions. It doesn't make any noise that I'm aware of. I haven't had it long enough to know if it leaves any scuff marks. Maybe putting electrical tape on it would prevent that from being an issue. I think the trolling motor spins inside bushing. I will keep an eye on it and hopefully can answer that questions better in the future. I'm sure their customer service at Boatlogix can give a definite answer. Hope that helps.

[@My_Fishingjournal]

It's a great design and I'm almost convinced however I'm just worried about grass being caught and hitting stumps. Not saying that's going to always be the case but there are what if's.

[@MoneyBass]

I like the look and it is very sturdy. The way it bounces around in rough water made me a little nervous that I could damage the transducer. Some have said that adding the brace can void the warranty because it is designed to flex.

[@tristinblades1970]

Getting ready to buy a 360 but i plow through alot of grass and lillypads. Im wondering how that transducer will hold up if im constantly in grass....

[@MoneyBass]

I use my 360 in grass and Lilly pads. It shows contours and paths through the grass. There is a forum Humminbird Tips and Tricks on Facebook that you can search through to get input from others in their experience. I have a brace on my 360 and I also avoid hitting hard structure like lay downs with it. Thanks for supporting the channel.

[@donpope5524]

Used the BoatLogic mount on my last boat, (Vexus AVX 1880)... amust have for the 360....Both Cornfield & Precision make one $100 cheaper! ... BFE is making a "dog bone" mount with bushings on both ends for The Rite Hite motor pole & different trolling motors; Ultrex, Ghost, etc....hoping they (or someone else) makes one for the TargetLock.

[@MoneyBass]

I'm interested in seeing how the TargetLock moves in rough water. I'd try one of the more cost effective options that are out now also. Thanks for the info.

[@donpope5524]

@@MoneyBass Do you find you get a better signal reading with the BoatLogic in rough water?

[@MoneyBass]

@@donpope5524 no. The product I have is just a brace to prevent excessive moment while on plane in rough water.

[@donpope5524]

@@MoneyBass Thanks!

[@qz2026]

I am concerned that such a bracket might void the 360 warranty. Evidently the play you notice is supposed to happen in order to transfer the load of movement (flex) to the entire arm. With such a support bracket the flex is removed which significantly increases the chances of breaking the transducer head off. And even if the unit is out of warranty, if the transducer should break off, replacing it would cost a fortune. I tend to think that if such a bracket was required, Humminbird would have included it in the package. Even in your demonstration in rough water, the transducer never got close to hitting the trolling motor shaft which could present a damage problem. The other issue is $229 for this BoatLogix mount. Another thinner one is also sold by another company for half the cost. I'll play it safe and leave the 360 as Humminbird made it. To me, it was well engineered by Humminbird.

[@MoneyBass]

You are correct. It is definitely a judgment call and you should proceed with what makes you feel comfortable. I agree with the warranty info also. I read that someone had their warranty voided and l've read where someone out of warranty wish they had it. I noticed some lines in my 360 readings that I thought may have been contributed to the violent shaking in rough water. There are definitely other options available. I purchased this one prior to seeing the option you are referring to. Thanks for your detailed information. I appreciate you supporting the channel!

[@bassfever4234]

Great video thanks look nice

[@MoneyBass]

Thanks for watching.

[@FranklinHicks-qs4gs]

That Thang ain't breakin

[@FishOutLoud]

Easy peasey ! That helps a lot. BTW, you have a on line Hummingbird dealer who has the best prices?! Thanks in advance

[@MoneyBass]

Thanks for watching. I use Brian at www.BBGMarine.com. Let him know that Ryan with the Rod Benders Bass Club sent you.

[@FishOutLoud]

@@MoneyBass Thanks! I really appreciate it. Remember, you're just one cast away...

[@crappienaterfishing1198]

How many inches from center to center on the brackets and cost

[@MoneyBass]

Hey Nate, I believe it was around $225. Check out the Boatlogix website for specs and pricing. It has been a while since I purchased mine. There are less expensive ones available now.

[@Bass_reaper1]

Waiting for mine to be delivered before Lanier tournament

[@MoneyBass]

Cool. Did you get Boat Logix or Precision Sonar's bracket?

[@turner773]

Were did you order this mount from trying to find it

[@MoneyBass]

I purchased mine directly from Boatlogix.net.

[@turner773]

Thanks a lot

[@CoreyGFishing]

Any stabilizer will actually void the warranty, it is designed to flex.

[@MoneyBass]

Thanks for the info. Did you get that directly from Minn Kota or Humminbird?

[@CoreyGFishing]

@@MoneyBass I purchased the mega 360 and it is written on a orange piece of paper included and I have heard it before from someone. I do suggest calling and asking though

[@MoneyBass]

@@CoreyGFishing would you happen to know the wording on the paper? I want to ensure we are providing accurate information because there are a lot of guys reading the comments for information. There was a similar comment made previously. I called Humminbird tech support and they checked with a supervisor for confirmation. They were not able to find anything in their records that stated that a stabilizer causes any issues with the 360 transducer. Once I provided that information the person removed their comment and said they were incorrect. Does that orange paper you have specifically say "any stabilizer will void the warranty"? If so, I need to update the information. Please let me know. Thanks for your help.

[@CoreyGFishing]

I tossed it it pretty much said that you have to folllow instructions for installation or warranty will not be valid I also remember reading a good thread about someone’s experience on bass boat central. Whole thread about it wish I had more to tell yea but if you called Humminbird and they approved it. Then it doesn’t matter. Enjoy your vids keep them coming

[@MoneyBass]

@@CoreyGFishing cool. I appreciate it. New video coming in about 30 minutes. Thanks for subscribing.

[@Ripp1n]

These will DESTROY your 360 ducer..Dont ask me how I know!! The shaft is supposed to flex etc.

[@MoneyBass]

Thanks for the info. What damage does it cause? Someone has mentioned this before but didn't give details.

[@FranklinHicks-qs4gs]

You lying ?

[@caseywozniak2861]

Now instead of electrical tape for your wiring, look into the cable management system (cable clips) from amp.

[@MoneyBass]

Thanks for the tip. What are the benefits of the cable clips?

[@caseywozniak2861]

@@MoneyBass It clips perfectly over your ultrex shaft with a notch for your wires. No more tape or zip ties.

[@MoneyBass]

@@caseywozniak2861 I'll check them out. Thanks.

[@FranklinHicks-qs4gs]

$250 ?? What a rip off