Preventing Heat Press Marks on Polyester for Sublimation

[@tchili1]

As the lady below just said, you gave me the EXACT info I needed so much. Thank you! WHEW! Couldn't understand why in the world I was getting all those ugly lines. Am off to order the pillows now. Thank you, Angie, for ALWAYS doing things the RIGHT WAY and not short cutting things or leaving out important details. Think for all the crafters out there, you are in my top 2 favs! Wishing you a very happy and safe Memorial Day!

[@AngieHolden]

Thank you!

[@lindacarreras3315]

Angie, the heat press pillows on Amazon are of brownish cover instead of white. Would that affect the outcome once pressed, meaning turning shirt yellowish?

[@jemmy2323]

They don’t color your shirts.

[@sunseeker8457]

In my view. Your best video so far! Many people are doing / trying all the tips from many KZbin videos. But I am sure many watch a video then go and try it that way. I do. And we have seen many video's about the pillows etc. But we all have different machines and we have to adjust things and try again and again until it's right. But they are NOT that many video's like this that help us over come some of the problems we all get. So thank-you for this video.

[@AngieHolden]

I appreciate that!

[@one_smol_duck]

Oh this is amazing! I thought the press lines were just a fact of life with sublimation. Thank you for this tip, can't wait to try it out.

[@kristinparker1495]

I was getting frustrated with press & paper lines but I watched your tutorial and just pressed a shirt following your guidelines with the pressing pillow and had NO lines. Thank you!

[@AngieHolden]

Great job!

[@bobsmith3790]

This is a dynamite technique! If I’m doing this well I really have to thank you for helping me get there. You’re a treasure to anyone wanting to learn this art.

[@rikkiejager2265]

Great video!! I use the foam and I fold protective paper and place my foam inside... slides into project easier!

[@AngieHolden]

I love that tip!!! Thanks!

[@614barbara]

Great video! I like the way your instructions are easy to understand for those of us just starting out with sublimation!

[@AngieHolden]

Great to hear!

[@joyscranfield5527]

Get tutorial, think I would go with lighter colored pillows, fraying, tearing, edges of paper is great way to go. Thank you Angie Holden!

[@AngieHolden]

Sounds great!

[@darlahpotechin1668]

When I used to get press marks on blankets which shows even more than shirts, I would literally press the rest of the blanket and then no press marks. Years later, I found pressing pillows and Vapor foam. But even though it took extra time, it did compress all therefore making the press marks go while flattening all. Hope that makes sense.

[@AngieHolden]

Definitely!

[@donnaboshaw4553]

You must be doing something right, the foam you recommended is on back order. Well done, can't wait to get it!

[@AngieHolden]

Ha! Sorry about that!

[@Reneesfun]

This is EXACTLY the video that I needed. I often get those press lines when using off brand thin polyester shirts. I think that I have some of those pillows but not sure if I have the right sizes. I’ll check your link. Thanks!!!

[@AngieHolden]

Yay! Happy to help!

[@feltthefluff]

Thank you so much! You are just so generous with you time and knowledge! Be well!

[@AngieHolden]

Thank you! You too!

[@grandbabylife]

I have heard you were not supposed to use Teflon with sublimation. But the pillows are OK to use? I get lines from my paper, sometimes tape, and my press. The last shirt, I sublimated, I had three different lines on it. Will this take care of everything? I am new, so still learning. Thank you. I’m assuming I had too much pressure. So I will definitely follow your advice. Thank you so much for the video.

[@AngieHolden]

Don't use Teflon ON TOP of sublimation. These pillows are fine to use. This should help with any lines.

[@grandbabylife]

Thank you so much. I’m learning a lot from you.

[@tinaclark5659]

Thank you! Been struggling with this. Simple fix to make great products!

[@AngieHolden]

Happy to help!

[@Tinebearcrafts]

Thank you for the great video! My press marks are grey for some reason. I used my sawgrass printer and used a Teflon sheet on top of my design but it was too small so I have dark grey lines where the Teflon sheet did not cover. But my question is where the Teflon sheet was covering the design I have a light grey shadow in the shape of my heat press. What does that mean? I did 385 degrees F for 50 seconds. Maybe my settings were incorrect?

[@AngieHolden]

Settings sound right. Sounds like it damaged the fabric?

[@ashleymarie7921]

Why do you have to have the different sizes? Just wondering. I did my first sublimation project tonight and used my easy press and mat and got some press lines. Thanks

[@AngieHolden]

Different sizes of pads are used under the project so that the edges of the paper hang off.

[@bevodaniel3384]

Great video. I find pre made pressing pillows too expensive. You can easily make your own with the foam and ironing board fabric. That way you can make custom sizes for a lot less expense.

[@AngieHolden]

That's a great idea!

[@trinapullum3986]

What kind of foam is required and where can I purchase?

[@bevodaniel3384]

@@trinapullum3986 the foam is what you use to make replacement cushions for chairs and such. It’s called high density foam padding and it’s usually green. The fabric is for ironing board covers, usually silver metallic. Both found at fabric stores.

[@HDEFMAN1]

Thank you so much for this very informative video. I really enjoyed watching this. You have just convinced me to go buy some pressing pillows for my first foray into dye sub!

[@AngieHolden]

Glad it was helpful!

[@nicoledickel4360]

So the foam from an ironing board would work just the same?

[@AngieHolden]

Sorry not sure!

[@jackiewoolard4359]

Thank you for this video. I am just getting into sublimation and love your videos!!!!!

[@AngieHolden]

You are so welcome!

[@shadia2000]

How thick is the foam? The link to the foam above no longer works but I'm excited to try this out!

[@AngieHolden]

I updated it to a working link. Sorry!

[@pamelasmallwood5722]

Great video! Thank you for sharing. On larger shirts how do you prevent getting marks from the size of the platen? I hope I’m explaining that well. For examples, I have a 16x20 press. When I press an XL shirt I see the entire outline of the top platen on the shirt.

[@pamelasmallwood5722]

Also, what temp, time and pressure are you using?

[@AngieHolden]

Oh good question! This should help with that as well as the platen will not be all the way down on the bottom plate if that makes sense and your shirt will not be sandwiched by the edges.

[@harvestcollection9133]

Does this method work? I also get the mark from the top plate

[@AnaSilva-ux6us]

Great video!!! Thank you so much for sharing your talent!!! Can you tell me what temperature you used and time to sublimate please??? Thanks again🌸

[@AngieHolden]

Honestly I don't remember! I believe I used the time and temp on the ASub paper for sublimation.

[@sharonbrown7715]

Question. Could you put the pillow or foam under the shirt and paper in the shirt and have the same results?

[@AngieHolden]

That should work!

[@Foreverblessedhands]

Blessing Hello any tips on how not to turn the stitching in the color brownish yellow on the collar?

[@AngieHolden]

Sounds like it is burning. Try not putting your heat press in that area or covering that with paper to protect it.

[@Foreverblessedhands]

@AngieHolden blessings I cover with a Teflon sheet it still does it 😢 sublimation has 2 be 400 degrees idk 🤷🏽‍♀️

[@svholleyday]

I Found if i pressed the entire shirt after transfer, press lines dissappear...has worked for me!

[@bobslfcu773]

I agree with the comments below, you are good at explaining things, and all business. Is the foam reusable or is it one use only?

[@AngieHolden]

Reusable! Many many times!

[@LadyG1]

Thanks for always being so detailed...refreshing

[@wiembensalemchouikha4767]

You are doing really good job 👏 I just started and am facing a problem of burn just around the heat resistant tape and idk why all the rest is fine have you an idea why us this happening please 🙏 Really appreciate your help

[@AngieHolden]

My guess would be the brand of tape you are using.

[@soexcitedpartyrentals6640]

thank you for sharing, the information is very helpful.

[@terrybarnhill8451]

I was happy I was able to steam my lines out of my project. Before that I put a border around my design to hide it.

[@jennyperson3217]

How do you print without the black rectangle around the design? To be able to leave the paper larger than the pillow.

[@AngieHolden]

Try this: kzbin.info/www/bejne/oZfQq6WCo8ians0

[@normazaharioudakis115]

Could those pillows be made? Love your videos thank you

[@AngieHolden]

Maybe? Not sure.

[@elizabethk8938]

Hi Angie! Thanks for a great video. My question is would this technique work with the new Cricut Autopress?

[@AngieHolden]

I have not tried it on that machine but I think it would!

[@mariapeak8821]

What temperature and time do you use for 100%polyester… loved your viedo

[@AngieHolden]

I generally do 385 for 50 seconds with my set up but yours could be different.

[@elycetecktiel3012]

Can I make my own pads with Quilted Ironing Board Cover Fabric?

[@AngieHolden]

I am not sure about that.

[@CustomCreationsbyKristin]

Your best video I have found!

[@AngieHolden]

Wow, thanks!

[@NGarza80]

How would it work on larger prints like 13x19 when the heat press is 12x15

[@AngieHolden]

You would need to press twice in that case. It gets a bit trickier but the same basic things apply.

[@stephaniegarton9172]

Great video as always, thank you! I'm new to sublimation and noticed the marks on two shirts I did (luckily they were just for myself) so this was very helpful. I also sublimate garden flags and have the same issue with the press marks. Should I use a heat press pillow instead of the Cricut EasyPress mat? I use a Cricut EasyPress and use the EasyPress mat under the flag, but the mat is bigger than the flag.

[@AngieHolden]

I like the pillow for the larger variety in sizing so that I can use them as shown.

[@kaylacheng4349]

Your color are so vibrant. Do you mind sharing your printer setting? My color are really dull.

[@AngieHolden]

I just use best quality, matte paper, and turn off fast printing. I do use an ICC profile with a lot of my prints though.

[@kaylacheng4349]

@@AngieHolden which icc profile do u used? Does it matter which program I use? I used silhouette studio.

[@AngieHolden]

Try this: kzbin.info/www/bejne/j6K6ZmRvbsiYhcU

[@amanahjane-jewelleryaccess1727]

Do you have any tips on tape marks?? I have found I don’t have pressing lines but where the image is taped the tape is leaving marks? Any tips on that?

[@AngieHolden]

Same tips for that. You can also try a spray adhesive and not use tape.

[@christysavoy9332]

Need advice on how to hest press a high heat transfer on 100% polyester shower curtain. What temp and how long would I press it with clam shell hest press

[@AngieHolden]

I would just use the time and temperature you usually use for polyester.

[@ehodge54]

Great video, Angie. Do heat press marks only show up if you're using the Cricut EP or do they show up in "regular" heat presses too?

[@AngieHolden]

Any heat press can leave them.

[@ThatJerkFromCali]

Does the weight of the sub paper make a difference? 105 vs 120 or any other?

[@AngieHolden]

I haven't found that I can tell a difference.

[@ruthshellnorth-troup7351]

With the pressing pillow can you put it behind the tee and put paper inside the tee. If you don’t have the right size PP.

[@AngieHolden]

It does best if your pressing pillow is larger than your design but smaller than your paper. That way the edges lay over the sides of the pillow. In a pinch though, I think doing what you are saying is better than nothing!

[@kimberleybeirnes3642]

what;s the difference between the pillows an the cricut mat??

[@AngieHolden]

The pillows are not as firm.

[@zarrinamay3035]

Can you use the Cricut mat as well? Will it still have the pressing lines?

[@rose29angel]

I used the cricut mat today and still got those press lines. But I need to try the ripping technique and lighter pressure next time.

[@AngieHolden]

The issue with the Cricut mat is that it only comes in three sizes. Note what I said on sizing in the video.

[@lilycopeland4525]

Would any type of roll foam work? Or does it have to be the specific one that is on your description? And thank you for all your helpful videos! About to start sublimation and you are my to go to videos.

[@AngieHolden]

I recommend what I am using as it is heat resistant.

[@joanwright2990]

Will the lines go away after washing?

[@AngieHolden]

Generally no.

[@gretchenmoore3485]

Great video!! Can you use the Cricut Heat press instead of the Siser Heat Press?

[@AngieHolden]

Yes it should work. It is just harder to control the pressure.

[@brigettethackerneale5965]

My husband is driving me crazy. LOL. He wants to know why it has to be a certain size, ie smaller than the paper but bigger than the image. I don’t understand well enough either to explain to him why. It may be a dumb question, but why does it have to be a specific size? Thank you!

[@AngieHolden]

You want the entire image to be supported by the foam for a good press however you want the edges of the paper to hang off of the foam so it has less contact with the shirt so less chance of press lines.

[@aminam4405]

what is the reccomended time and heat. I burnt my shirt and im using Asub. it doesnt mention how much for a shirt...:(

[@AngieHolden]

The first thing I do is see if the shirt has any recommendations from the manufacturer. If not, ASub paper has a insert in the box that has recommendations for materials. I use the recommendation from that.

[@cscott505]

What about press lines from the heat press itself?? That is what im struggling with!

[@AngieHolden]

Same things apply.

[@cscott505]

@@AngieHolden Thank you so much! Just purchased the complete pillow bundle

[@lindacarreras3315]

Hi Angie, I'm getting marks from the heat tape. Is it because the pressure was too tight from the heat press? A polyester shirt was used. Thanks.

[@AngieHolden]

Yes! Most likely you need to turn the pressure down or carefully place your tape on the very outside where the heat press will not hit it.

[@lindacarreras3315]

@@AngieHolden Thank you; I thought so too. I was watching another video and it was suggested not to 'clamp' down the top platen - just let it sit on top of fabric.

[@AngieHolden]

Sublimation does rely on pressure to get a good result. I do think you need some pressure to do your project correctly. You can probably get away with less on fabric surfaces.

[@whitney7493]

Hi Angie, thank you for making all of these videos! You may have answered this before but can you sublimate on a 92% polyester/8% spandex and if so how long would you recommend? Thank you!!

[@AngieHolden]

Sure you can. The time and temperature depend on your setup though.

[@whitney7493]

Thank you, I’ll watch your videos again!

[@candablo]

I wonder if the same effect can come from just ripping the edges

[@AngieHolden]

I do still see a line from ripping the edges. It is a bit less noticable.

[@shayannagreer4422]

Could you put the protective paper inside the shirt, but the foam or pressing pillow underneath and get the same results?

[@AngieHolden]

That would probably be fine!

[@lindacarreras7088]

Hi Angie, would you do a video on heat press pressure adjustment/settings? I purchased a Craft Pro and follow the instructions to test the pressure, but I’m getting lines from the top platen onto the poly shirt. I called them and they said I just had to keep trying and find the right pressure. Is 400 degrees/60 seconds the recommended setting for sub on either Cricut Easy Press and regular heat press? Thank you.

[@AngieHolden]

It really is just feel and testing. There really isn't any trick to it that I can figure out!

[@lindacarreras7088]

@@AngieHolden Thank you Angie.

[@kathleenwilds1624]

Angie … love this video. Did you attempt the first one with ripping the A-Sub paper? I wonder if just having the paper ripped alone is helpful … on one of my recent projects I even got marks on my polyester from the heat tape! So frustrating!

[@AngieHolden]

It helps a little as you can't see the lines as much but then you still run into the problem with the tape as it will be pushed into the fabric (as you mentioned).

[@Ellie-c3z]

How do you stop the tshirt from going yellow after heat pressing it? What am I doing wrong??

[@AngieHolden]

I would check your time and temperature as you may be scorching the shirt.

[@kayschillage9850]

What is that roll of foam called? Is it heat resistant or does that matter?

[@AngieHolden]

It is heat resistant. I linked to what I use in the description below the video.

[@nananjdz]

Can you use the Cricut heat press mats to accomplish the same results as the pressing pillows?

[@AngieHolden]

I haven't used them for that but they would probably work. The drawback is there are only three sizes. As stated in the video, the size is important.

[@rosedeyton7866]

Where did you buy the pressing pillows? I can’t seem to find the link.

[@AngieHolden]

They are linked in the description below the video. Click on show more if you are on computer. On mobile, click the arrow to expand the description or swipe up on the video.

[@elizabethmontes382]

Hi Angie. I need to know how much pressure I need for sublimation? I have a heat press...

[@AngieHolden]

Depends on what you are pressing. It usually has instructions with your blank.

[@elizabethmontes382]

@@AngieHolden OK I was trying to do a graduation sash..some parts came out light...

[@valeriehofmann2615]

I like the polyester shirts better then blends as they don't leave press lines. The cricut shirts are nice and thick and don't leave lines

[@AngieHolden]

Definitely the Cricut shirts are really good!

[@nanspeed2005]

Do you use this method if you're using the Cricut Easy Press?

[@AngieHolden]

You definitely can! Same thing applies.

[@peggyabbott8939]

How do you get rid of the press mark or is it there permanently??

[@AngieHolden]

You can try a small iron on high and rubbing in circular motions over the area. Sometimes it helps.

[@charleneverdier5560]

Where and what kind of foam can you buy

[@AngieHolden]

I linked to what I used in the description below the video.

[@JORGINHODONASCIMENTO]

Great video as always! Do you get the same "memory effect" on poly/cotton sublimation?

[@AngieHolden]

It is less noticeable but I try to use these steps for shirts with any poly content to be safe.

[@waynecordingley4157]

Great video. A lot of setup and looks like you have to be pretty exact lining up the foam and the design.

[@AngieHolden]

Not terribly exact but you do have to be careful.

[@lindacarreras7088]

Thank you for all your great videos. I have a question on using Infusible ink on poly shirts. I get not only the lines, but white ghost Y background. I use Cricut heat press. Would heat pillows solve my problem? Thank you.

[@AngieHolden]

I am not understanding the ghost background issue? Are you using a white shirt?

[@selinajanie]

Do you know what the difference of the grams on the sublimation paper makes? I see that Asub sells difference in grams

[@AngieHolden]

It is intended to be for the difference in your images and how much ink you are printing. I tend to stay with one.

[@ibnshabazz9630]

I got a mouse pad and the same thing you’re holding in the video with my sublimation printer and some white cloth. What are these for? Thought it was a beverage holder lol

[@AngieHolden]

The white cloth may be Teflon or just a polyester sloth. I am not sure what you are referencing as far as the beverage holder?

[@karenorange2460]

Want to use iron on vinyl on dri fit shirts, can’t rip the edges, also, it seams I would have wasted vinyl ? , as you know, we cut that stuff right up to the edge! 😂 so I’m a little confused about how to apply the same technique in your video of sublimating to iron on vinyl. Help! Help! Help! 🙏🏻

[@AngieHolden]

I try not to sublimate onto HTV often. You can try the same things when it comes to the sublimation portion but not sure on the HTV application.

[@elunico4257]

Would this help with sublimation scorch marks? I've tried different temperatures and time but still get scorch marks that don't go away.

[@AngieHolden]

No not really. I do address scorching here: kzbin.info/www/bejne/n4Gxp3aPeMt5gaM

[@lisahall818]

Hi Angie, the foam, is it a special type of foam or would any sort of firm foam do?

[@AngieHolden]

You would want it to be heat resistant so I purchase the foam that is intended for this.

[@CelticMist7]

When using iron-on vinyl, is the only option to make sure the vinyl hangs over the pillow, because you can't tear the carrier sheet?

[@AngieHolden]

Correct. Only option is to use a pillow, foam, or mat under your design. Making the pillow larger than the design but smaller than the carrier sheet would be ideal in that situation.

[@karenmartin5277]

Hi Angie. I use a Cricut Easy Press 2 and the Cricut pressing pad. Just getting into sublimation. Would I need an additional pad or foam to avoid the pressing lines? Thank you.

[@AngieHolden]

I haven't tried the Cricut pad but it should work. The only issue is sizing as I explain here how you want a pad of a certain size for each item you are making.

[@karenmartin5277]

@@AngieHolden Yes, of course....senior moment :)

[@Bristolgrl]

I LOVE your shirt! That’s me! 😂🤣☺️. I love all of your videos

[@AngieHolden]

HA! I was wondering how long it would take someone to comment on that! It is totally ME!

[@juliasnider5905]

Thank you Angie so much! I just started into Sublimation and did not know the lines would happen. 😳 This video helps alot!!

[@cindythayer1445]

Hi- how do you get your reds correct? Mine keep coming out too orange-looking. Thanks

[@AngieHolden]

I am having an issue with reds even after the ICC profile I added. All you can do is pick a different deeper red.

[@trishmorden177]

What program did you use to print your design, there are no cut lines

[@AngieHolden]

I think Photoshop. You can see some options here: kzbin.info/www/bejne/injEnZtslseJZ9k

[@claretaylor]

Hello! I would to love to purchase the foam to try but I'm in the UK and struggling to find anyone who stocks it! Do you know what the foam is made of so I can try and trace some or something similar here in the UK?

[@AngieHolden]

I do not! Sorry!

[@kalliejoscottonpatch]

Hi what temp and time did you use. thanks

[@AngieHolden]

You should always check with your blank for directions. If you don't find instructions on your blank, the back of your sublimation paper package is a great place to start.

[@kcurrier32]

Are you able to use the Cricut software to print a sublimation without the print then cut black lines?

[@AngieHolden]

No you cannot. Here is a video for you with options: kzbin.info/www/bejne/injEnZtslseJZ9k

[@SomFamiliar]

Great video as always ... You could make a video using Easysubli paper on your EPSON printer ... my printer is the same as yours, however when I used easysubli on my printer the printing was not good, in fact it was very bad ... so my option was: First I just printed Easysubli on my shirt, and then I sublimated it on the easy paper that was on my shirt ... then it worked ... but printing directly on easysubli paper didn't work right ... if you can think about it it would be great ... thanks ... love your videos

[@AngieHolden]

That is on my list! Hopefully soon!

[@OG_Beckie_Leigh]

I’m not completely certain, but I think you have to use EasySubli ink to print directly onto EasySubli vinyl. Of course, that may just be a marketing thing by Sawgrass & Siser.

[@AngieHolden]

I am always willing to try something and see what happens!

[@OG_Beckie_Leigh]

@@AngieHolden Same here! Some of my best pieces are a result of the “let’s try this and see what happens” method of design. LOL. I’ll be watching for your experiment.

[@SomFamiliar]

@@OG_Beckie_Leigh That's right, for what I researched so that the printing is perfect we need to use the Sawgrass printer ... because they have the appropriate color profile ... however in some videos of Siser itself it says that we can use any type of printer ... But it didn't work for me kkkk ... I'm looking forward to the video ... I'm sure Angie will be able to solve it

[@jodi-kayeallen6468]

How do I prevent the press marks if I am using infusible ink sheets and not paper? and also if I am using a 100% poly red shirt..not white? help!

[@AngieHolden]

Just so you realize that the red will show through the infusible ink. The pillows I show here will still work. Otherwise, you can leave more area around the transfer sheet or try trimming it close.

[@meitsjust]

Yes ! You have such a great channel and it's like you read my mind.

[@AngieHolden]

Awesome! Thank you!

[@meitsjust]

I'd love to see a video about having a design to big to press in one pressing.😁

[@AngieHolden]

Hmmm...I might have to make that happen!

[@meitsjust]

@@AngieHolden 💓

[@ricknelson3394]

We are making sublimation mugs but the black lettering is running together and not legible. We have tried different fonts and sizes to no avail.... any suggestions?

[@AngieHolden]

if you are printing from Cricut Design Space, turn off bleed before printing.

[@ricknelson3394]

@@AngieHolden I thought the bleed did the edges of the design and didn't affect the interior designing. We tried a zodiac cup and the words looked bunched, the crab had no definition. Will turning the bleed off affect the images and words?

[@AngieHolden]

It depends on how you have it designed but it can definitely cause what you are describing. I would turn it off for all sublimation projects anyway so give it a try with it off.

[@ricknelson3394]

@@AngieHolden THANK YOU SO MUCH!!!! We did as you suggested and the mugs are beautiful. Every words is legible and the pictures crisp and clear. I am so glad for the advice you gave us.

[@NYGlamgirl6]

Hi Angie! What’s the difference between “heat protective paper” and “butcher paper”? Do we need both? Thank you! 💜

[@AngieHolden]

You just need one or the other! Something to protect your work surface and heat press.

[@NYGlamgirl6]

@@AngieHolden thank you!

[@maggypye4529]

Would using a folded up towel be similar to the foam? Or does it not have enough give?

[@AngieHolden]

I don't think it would be equivalent. You need a bit more give than that.

[@maggypye4529]

@@AngieHolden but I have really fluffy towels.....lol!

[@AngieHolden]

HA! I mean you are welcome to try but you may be upset with the results!

[@leanne7832]

Hi Angie, Thank you for another great video. I can't wait to try this. I was wondering what temperature you were pressing at and for how long. I'm brand new to sublimation. I've made a few things so far and have gotten press lines on some. I'm still trying to figure out how long to press and temperature setting. A lot of the things I've bought don't provide that information. The only recommendations I have is what is on the A-Sub paper box.

[@AngieHolden]

That is all you have to go off of really. First would be what the blank supplier recommends. Second would be the back of the paper box and trial and error.

[@beachlifesoy2253]

I'm hoping I can get a response... I'm in Canada and I have looked everywhere for those baby onesies as well as any sublimation onesies and can't find them anywhere! Do you know where I could get them? tia :)

[@AngieHolden]

Sure. These are from Cricut. You should be able to order from their site from Canada. My coupon code might work as well so try CCC2021 when checking out if you spend at least $50!

[@roadsidetees2024]

Hi! We do our shirts on 8" x 11", and use a lot of that area leaving little leeway for the pillow, what size would you recommend. Or would you recommend the hand cut foam option for that? Thanks in advance!

[@AngieHolden]

The hand cut foam may work better in that case as you could customize it.

[@kimghersi6190]

what tape dispenser do you use for your heat tape?

[@AngieHolden]

I generally like the Artesprix or Cricut heat tape and those both take a standard office tape measure. I just make sure to get one that is weighted.

[@chrislewis3322]

What about HTV n scorch marks

[@AngieHolden]

I have never gotten scorch marks with HTV that I know of.

[@michelleeilers9863]

Great video! Question when using the Cricut press mat in my swing heat press I am no no longer getting the pressing lines(TY) however it is changing the color of the shirt (making the grey a little lighter). I'm following the back of Asub paper recommendations of 400 for 35-40 sec. Any ideas on what would cause this?

[@AngieHolden]

Did you leave them sit a bit and see if the color came back? Or try washing them? You can also cover the ENTIRE area with butcher paper to see if that helps.

[@boylesrena11]

What was the name of the foam ?

[@AngieHolden]

I have what I use linked in the description.

[@meganbrown9828]

Where do you buy your blanks from

[@AngieHolden]

A wide variety of sources. Try this: kzbin.info/www/bejne/gWS9equlfN9sqNE

[@mamieslife1954M]

Can you use the pillows or foam with infusible ink sheets and iron on vinyl

[@AngieHolden]

Yes definitely!

[@angellynmcdaniel1738]

Great video, Thank you for sharing your recommendations! I do have a question, though. Could I use the easy press mat to put in between the shirts, like you did for the pressing pillows and foam, or would the mat leave an outline/mark on the shirt?

[@AngieHolden]

You definitely can! It is just that you can only get three sizes with the EasyPress mat.

[@angellynmcdaniel1738]

@@AngieHolden I ordered the pressing pillows and tried them out today. I am still getting lines on my shirts. I tried adjusting the pressure of my heat press, but still got lines. The top part and the left side are where the heat press is leaving lines on my shirts. I put the two shirts in the dryer to see if that would help take out the lines, but sadly it did not. Do I need to try to calibrate the heat press by adjusting the springs on top where the pull down handle is at? I have an older model heat press that got passed down to me. The model is Homcom 15x15. If you have any suggestions on what would help me, I would gladly appreciate it!

[@AngieHolden]

BOO! I haven't used that model at all. It sounds like maybe the pressure is uneven if just two sides leave a mark. Can you adjust that at all? Pull up just those two sides?

[@angellynmcdaniel1738]

@@AngieHolden It seems to be adjusting the bottom part more than the sides or the top. I tried a few more shirts a little bit ago and still getting the marks. I have lessened the pressure, then it is too loose and my design doesnt press all the way. (Some shirts have a rustic/vintage look to them now, which is kinda nice), but still has the marks. Then i tighten it back up, and same thing. I cannot find a happy medium and I am getting very frustrated with it. I am thinking of getting an Easy press maybe this weekend if I cannot get the heat press figured out.

[@angellynmcdaniel1738]

@@AngieHolden I sent you an email!