Dealing With Press Marks

[@julieaustin5730]

Thank you for the recommendation of the shirt alignment, it has gotten rid of my frustraion. I am enjoying your videos, please keep them coming.

[@vincenthill5032]

My biggest mistakes 🤫😩

[@MickyDoyle]

My guy! Thank you for this, I've noticed it so much more recently and was scratching my head as to what I was doing wrong. I appreciate your help and the videos !

[@noreenscott5991]

Love this guy's realness!! Thanks for all the great information!

[@judeyyudkin3183]

I am going through this very problem and up pops your video. Always learning from you. Thanks for all you share!!! Their are many people on line charging for what you share. So thankful I found you on KZbin.

[@villy4083]

“That noticeable square is because the rest of the shirt is wrinkled and you just ironed a huge square into the tshirt” 😂😂😂 💯

[@Missblaak]

Nope. Washed shirt and it’s STILL there! 🤷🏾‍♀️

[@WetbackNoSetback]

Im a worrier, & tho i do feel silly i didn’t immediately think this, i feel better having someone else reassure me im just dumb

[@WetbackNoSetback]

@@Missblaaki washed the shirt like two or three times before the square went away

[@BlazeUTLThaRealest]

Bro it's like you be reading ma mind for real I was just dealing wit this problem today on some black shirts 😫

[@technodrone7723]

Ok but what about when the rest of the shirt isn’t wrinkled. This happens especially in gildan 50/50, black hoodies especially. If I use my smaller platen so I’m not pressing over top the front pocket I get an ugly rectangle lol

[@debbiegusty]

Nice video! What type of magnet clips are you using for the Teflon sheet?

[@BigBrandoh]

refrigerator magnet clips

[@janeabare5363]

nice info and sharing of idea..

[@giftadjene7683]

I love you so much just for your honesty 😊🙏

[@gabe1784]

Hey man, what’s the name of the blank version of shirt you’re wearing?

[@grimaceLB]

Solid post, appreciate you

[@m1ni430]

Sometimes it’s the material you’re working with. For example foam hats. You can’t get rid of the mark. Anything polly blend over 50% will leave a permanent mark if temperature is too hot

[@hawksfan]

I just ordered press pillow from Amazon after learning that poly shirts keep the memory of press and won’t release those lines as you say .

[@m1ni430]

Nice!

[@tessadavis471]

I’m learning how to do all this and I almost shit my pants when I pressed a polo and it was a red one and it turned DARK RED. Looked back later and it was cooled and boom it was perfect. I found your video and felt SO much better after 😂 “a wrinkled ass shirt” was my favorite part. Thank you!

[@elimitchell6147]

I had that square problem to a couple times. This vid helps

[@rightfullyoursclothing1040]

I run into this issue with dark shirts ( black especially, navy blue etc ) even after cooling + ironing the remainder of the shirt , sometimes the box still remains

[@BigBrandoh]

are you using 100% cotton shirts? thats what i use. i never have an issue.

[@rightfullyoursclothing1040]

@Big Brandoh Yes I either use Gildan softstyle or Anvil lightweight. Easing the pressure sometimes helps but not 100% of the time

[@djdoobiekutzofficial]

​@@rightfullyoursclothing1040 turn down the heat and lower the pressure...that might help with darks...helped me...

[@HDEFMAN1]

Interesting video, liked the content

[@BigBrandoh]

thanks for watchin

[@joelclark481]

Makes Total Sense. I appreciate U. Thanks Bruh!

[@levisamuel3653]

Great video and quality ♥️✨thank you for sharing.

[@jameskastner2062]

Bro this is gold. Good looking hustler

[@HealingApparelCo]

Hello thanks for the video , do you know how to avoid the marks from the neck , you know how you press the shirt and it marks the neck, so it makes a half of the circle white or discoloration from the heat

[@BigBrandoh]

yup. dont press on the neck. lay the neck over the edge when you press.

[@amydishen5167]

Thank you!! You are so great at explaining! Just subscribed :)

[@porkbellyy]

Thank you for this info! :) How about a press mark on the back due to the front collar? Will it go away over time?

[@nealc8558]

Good vid! Thank you!!

[@afematazofthenorth9438]

Bro that shirt is sick with it!

[@BigBrandoh]

i appreciate it. its on my site

[@stopneverstop]

great, informative vids, just out of curiosity, how did you attach the silicon/butchers sheet to the top of the platten???

[@hangoutwithebonie5225]

Heat resistant tape or magnets

[@Rochellemarieschwab]

I had this happen to me on a sweatshirt. It's only 50% cotton. I will try and press the other parts of the sweatshirt and see how it goes. Thanks again.

[@Jayaluv854]

Wow very helpful thank u!

[@HelmetVanga]

Great video. What is the material wrapped on the topped part and the clips around. I used a machine to seal and it is the same color but I don't know the name or where to get it.

[@swolegrandpa]

Solid info bro TY

[@timwulowka1612]

Great vid man! What press is that. Im in canada and id love one that slides out always burning my knuckles lol.

[@BigBrandoh]

i have links in my description box for you. they might ship to canada. im not 100% sure but its worth checkin out,

[@alexandrafrangos2394]

What is the purpose of repressing your design a second time?

[@BigBrandoh]

its recommended by the transfer company. not sure what the purpose is but my transfers last 50+ washes with no issues, so i'll keep doing it per their instructions hahaa.

[@djdoobiekutzofficial]

To bake it in proppa! So it actually goes into the material and it last longer and it more durable...

[@redroses501]

Would address how to remove htv mistakes?

[@BigBrandoh]

look up VLR, that'll be your best friend for all HTV mistakes.

[@OfficialG4ss]

Hey GM I’m darryl and I wanted to asked what kind of sheet the material do you have over the top of your press

[@BigBrandoh]

teflon

[@teenacantu7989]

can you make a video using htv on the back neck rim (not label)

[@BigBrandoh]

hi, i rarely press anything that high on a shirt. i dont feel it looks good when the shirt is worn. but if you wanted to press somethinf high up close to the collar. you can use a mouse pad or teflon pillow inside to help raise the shirt up to press. flip the shirt over, slide the pillow or pad inside and press. hope that helps

[@yadmar123]

Needed this! Thank you

[@BcuzImBatmanning]

A print "square" on polyester or cotton / poly blends that doesn't go away is usually because the temp was too high or it was pressed for too long.. That's why I stick to 100% cotton.. Too easy to melt / burn polyester..

[@BigBrandoh]

those cotton poly blends are tricky.

[@AskariArt]

For dualblend/triblend: I'd reduce temp, with the heatpress nation press use a laser temp gun to check the center of your plate. My press is actually 320 when I set it to 312. If I set mine to 320 its 334 and that burns the shit out of my shirts. Pressure is key, depends are you using a cover, pad are you threading the shirt. It really is a science and there are a lot of variables that will change the outcome

[@djdoobiekutzofficial]

​​@@AskariArt you guys tried cooking paper sheets on blends and/or 100% cottons? I use it every time to bake it in after a first transfer..it works like magic...

[@djdoobiekutzofficial]

​@@AskariArt or use it on the first press too might help...try it out, play a little, baking sheets are dope and it can save you a lot of trouble...

[@manuelcruz6376]

great video.. what kind of heat transfers you do? vinyl / inkjet/ sublimation. just want to do something nice and easy. thank you for your videos

[@brandypeay5350]

I have this problem with foam trucker caps. Doesn’t go away. Lessened pressure and lowered temp. Still leaves the imprint from hat press🤷🏾‍♀️

[@BigBrandoh]

yeah foam truckers is tricky. i stay away from them hahahaa alot has to do with platen size and pressure

[@brandypeay5350]

@@BigBrandoh yup thank you.

[@Anthony.Gennaro]

I use 100% organic cotton I never get issues with them only on 100 %regular cotton always gives me issues I do the same method you do on those type of shirts too

[@Autumn77077]

Great info, I use a Printful and have had customers receive their t-shirts and the shadow shows up after they wash it - what would be causing this issue?? Same dark square box around the graphic, but it shows up discolored after it has been washed - and Printful doesn't give any explanation they just say sorry and offer a reprint. Any ideas or help, or can this be fixed after the customer already has the product in their hands?? Thanks!

[@AdvertisingArtTn]

How would you fix the ring on a Poly polo?

[@BigBrandoh]

polyester is a tricky material to work with. the heat activates the pigment in the material. so the discoloration from the heat on polyester is usually due to the dye in the material.

[@letsgetdowntobusiness-]

What if your getting discoloration on a white tee? I even cleaned my press.

[@BigBrandoh]

not sure. never experienced that. over cookin the shirt? ive never had issues with white 100% cotton shirts before

[@letsgetdowntobusiness-]

@@BigBrandoh Yeah, probably my temp was little to high. Thanks for replying Big Brandoh.

[@djdoobiekutzofficial]

​@@letsgetdowntobusiness- temp too high and too much pressure...

[@matthewtownsend4302]

You a good KZbinr. Keep it coming bro.

[@Fredsta4christ]

I just got that exact press. How has it held up?

[@OneDegreeLife]

If Supacolor doesn't do gang sheets? How'd you go about getting such a thin design? Perhaps I missed this mentioned somewhere.

[@BigBrandoh]

you order by the size of your design. i just trim off excess paper thats not needed.

[@OneDegreeLife]

@@BigBrandoh Much appreciated. If that text design is, say, a 1x8. Are you ordering on like an 8.3x5.8 and simply discarding the other 4.8 inches?

[@BigBrandoh]

yes. that is correct. repeating the text would be ganging. the order could possibly be rejected. i dont work for supacolor and i dont know how strict they are on that type of stuff so i cant say if it would be canceled or not. just my assumption.

[@OneDegreeLife]

@@BigBrandoh Right on. Ya, it's technically ganging, but if it wasn't a bunch of different designs it might be more of an issue. Seems like a waste, but I get the money end of it. I have an account and listed you as the referring source. Have my samples, but haven't created an order yet as I'm still narrowing down my designs/shirt choices for Supacolor use. Plan on using this for poly/blends as opposed to Elasti from TE. Just wanted to strategize my layouts. Keep up the helpful vids. If I come up with any more videos in this arena myself, I'll be sure to give you props and refer. THX

[@mictlanone6198]

I think im the only one that noticed tht technique with the teflon. Smart move. Im guna have to do the same

[@JGreenVA]

Genius

[@mictlanone6198]

@ yup

[@anthonycarter2805]

My man link me to that instrumental playin in background

[@mizapato4927]

Have you ever used thermoflex plus htv?

[@ramonesfreak2010]

Real good stuff. Hes used it before.

[@oliviajenkins3963]

My issue is my heat press want go pass 250 and it’s burning my images. I really don’t want to buy another one

[@BigBrandoh]

is it on F or C? most presses will go to 400 degrees. not sure why yours maxes out at 250

[@djdoobiekutzofficial]

​@@BigBrandoh the termostat went ciao so it heats infinetly...

[@JohnDiPaolo-q2v]

Where you buying the t-shirts from?

[@BigBrandoh]

i buy wholesale directly from the manufacturer.

[@42er1322]

That shirt is dope as hell... Is that vinyl or heat transfer paper?

[@jtex308winn2]

What type of heat press is that ? My dude

[@alexherman1987]

I noticed you use a Teflon sheet. Is there a reason for that?

[@BigBrandoh]

i use it for static. it helps buffer out the static in the room. static sucks cuz the backing of the transfer can get stuck to the top heat platen. tryna peel it off a hot surface is no fun hahahahaa. so by adding the teflon sheet it acts as a buffer between the transfer backing and top platen.

[@margaritaruiz5718]

I like that you are holding it with the clips. Good idea. Thanks!

[@djdoobiekutzofficial]

​@@BigBrandoh always have a pair of big tweezerz ready near by lol!;-))))😅😂

[@DONTOURAGETV]

I see you got the Teflon paper on the top part of the press but what is that material that you have on the bottom sliding draw ?

[@tamiekakatrina1489]

Thank you

[@melissagrant4729]

What can cause a little bump under a DTF transfer on a shirt?

[@BigBrandoh]

lint or debris. good to keep a lint roller close by just in case. lint roll the shirt before prepressing

[@sealedinchrist5413]

I have white adhesive residue on my shirt after pressing the transfer. How do I get rid of it?

[@BigBrandoh]

all over? or around the image? not sure thats something that can be removed after its been pressed on. i seen somebody on tiktok show some dtf transfers they received from somebody that were covered in adhesive powder and it was all over the transfer not just on the design

[@sealedinchrist5413]

@@BigBrandoh Ya, it was all over. I figured out what I did wrong. I wasn't shaking the film enough after I put the hot melt on. I also flicked it a couple of times. Its working fine now. I unfortunately ruined 3 shirts. But on the plus side, I have 3 new shirts. Ill get it off with something and sport them around the house. lol. Thank you for your reply brother.

[@djdoobiekutzofficial]

​@@sealedinchrist5413 actone usually works for getting rid of those dtf marks. Get a white full cotton rag and put aceton on it then pres it to the marks so it soaks a nit then rub it few times and it should come right off.repeat the process again to make sure its all clean...worked for me a few times.. and make sure its not colored rag especialy if its a white tee cuz acetone will disolve any colored soft rags and leave that color spots on white tees..made that mistake once lol..the fixed it afterva lof of rubbing...then just pressed a logo there on that spot and made something up with few logos..saved the shirt lol

[@chrislewis3322]

When will we get to buy some stuff from you and get sent to Australia?

[@BigBrandoh]

sorry but dealing with customs on international orders is a pain in the ass. until i can find a legit way of shipping to other countries with no issues

[@djdoobiekutzofficial]

​@@BigBrandoh what kind of issues are you having bro? And your shipping from us? We got some shitty customs crackerz here too in europe, started to bother us ever since corona circus and now they cracking hard on anything its ridicoluous..

[@Daliferrio]

I still see the square after the last press, am I imagining it?

[@bharp3539]

Can you give a hat press tip to avoid heat marks on hats

[@BigBrandoh]

ive never experienced heat marks like this on a hat. only creasing and warping. due to wrong temp and wrong materials and also wrong size bottom platen. when i press on hats i usually stick with cotton hats.

[@commish915]

My theory, it can also happen perhaps because of the quality of the fabric. It's possible the garment can't withstand the amount of heat being given. That means it's time to re-evaluate their source🤷🏿‍♂️

[@norwindareyes1866]

Aye...I agree

[@Survivaltostrength]

I don’t think this works for 100% polyester 😢

[@brandonrenteria131]

I saw your supacolor ad and I was wondering about scorch marks on the hats. I have two heat presses one being the 360IQ and that one is really only good for patches because of the way they built it. The one that your using I see it has a larger top platen and doesn't have a big "Lip" where it comes down on the bill. How does it do on the hats with press marks?

[@BigBrandoh]

i got a video on here showing how i press on hats. i never get any marks on hats when i press them. just make sure you got good pressure and the hat is smooth all the way across when loading it

[@sayitaintso5267]

Question: When you order heat press transfers….does the detail have any bearing on the price?

[@BigBrandoh]

no. detail doesnt affect the price, the amount of colors can mess with the price tho. all depends which transfer you use

[@sayitaintso5267]

Copy that. Appreciate the info. Getting my ducks in a row to come out with my brand by late summer. Trying to get all the information I can.

[@peterlona7835]

What brand is the t shirt

[@robertfulton4232]

Hey man what’s the best way to prepare your designs to transfer express uploading your designs to order them? Do you have a video on this? Wondering if the best way is to make my AI file the size of the transfer page for transfer express to gang them up myself in AI or adding all my designs to there editor page

[@BigBrandoh]

yup. create ai file the size of the sheet, drop all your designs on and save it and send it in.

[@bharp3539]

How can I get that dope ass LA tee?

[@BigBrandoh]

bigbrandoh.com or link in description. i appreciate it bro!

[@dedricklee91]

When I press something the black turns grey

[@celiaquezada1524]

is that a auto open

[@Fredsta4christ]

It is yeh.

[@1939Masterdeluxe]

Bro I just did some shirts and it scared the 💩 outta me then I seen it slowly going away my heart dropped

[@elimitchell6147]

Ok. I have 2 questions about jet pro ss. Everytime i press a shirt it either sticks to the protective sheet or it peels up with it. Or it cracks after like a few days. Can you tell me where im doing wrong

[@djdoobiekutzofficial]

Switch to DTF..

[@louisrichmond2020]

Mine actually turned a different color

[@SassyFrizzle]

I love everything about this video! LMAO!

[@dynagraham4194]

What about a white T

[@valentinkeef]

🔥🔥🔥🙏

[@XOZEE-kn5cz]

I just made some gender reveal shirts, on black Dri fit shirts and my heat press left the mark behind , it hasn’t gon away :( and I don’t want to hand it to my client looking like that

[@BigBrandoh]

drifit is made out of polyester. polyester reacts weird under heat. one of the biggest reasons i dont use polyester shirts. but try 100% cotton for your client.

[@HelloThere.....]

Can't you just wash the shirt?

[@valeriehofmann2615]

Steaming would be better

[@riocoleone5387]

I knew this too didn’t know what he talking about before I even clicked on the video. Waste of damn time

[@deondraeporter8766]

Where to buy shorts 🩳 for your business??

[@BigBrandoh]

i have no idea. i dont offer shorts for any of my brands.

[@djdoobiekutzofficial]

China bro...

[@chavezvera1643]

Thank you for the video bro !!!