Prime RC How-To: Front 4-link install

A four link is a great upgrade to the front of an Scx-10. Follow along as we add one to the front of our Project:Cheapbolt.
You can check out Project: Cheapbolt on RcCrawler at the following link:
www.rccrawler.com/forum/axial-...
Please make sure you subscribe and feel free to like this video.
You can also check us out of Facebook @ / primerctv
You can find us on Instagram @ / prime_rc_tv
You can also Email @ [e-mail]
Feel free to comment.
We will do our best to answer any questions you may have.
All video and photos are shot by me or my crew. Open and closing theme (Cop a Feel) is by Jason Shaw of music by audionautix (audionautix.com) and is used with permission under Creative Commons License 3.0.

[@michaeldoesrandom3016]

My servo horn doesn’t clear the bar that is just behind the bumper and idea why? I follow your instructions exactly like using the links in the bag but no suspension travel

[@PrimeRC]

I have no idea. Aftermarket servo or servo horn? I actually had that same problem on a scx Cassie Currie Jeep. I had to trim away part of the brace to clear the servo horn and it was all stock. I just used a dremel and notched the brace, worked fine every since. Good luck, hope you get it sorted.

[@michaeldoesrandom3016]

Prime RC ok. My plan right now is to just fabricate shorter upper links in the front because the links from the parts bag are too long and they are pushing my axle into a weird angle. It should solve the problem.

[@gabeitch-5151]

@@michaeldoesrandom3016I know it’s a bit late but I used the rc4wd krawler links and it did the same thing. I just pulled it out cause the bunker mount gives it enough support