Print from your iPad photo booth: the AirCast Pro II is so fast and easy to connect to Booth.Events

[@KaptureKnoxvillePhotobooth]

Thank you so much for this !

[@booth.events3807]

You're very welcome, all the best for your next event!

[@richardortega8754]

I use foto flix. With an air module. The app will not print a single stock 2x6. We'll it prints it , but will will print on the center of a 4x6, and will cut that 4x6 into 2 x2x6's. I have been having to use your stock 2x2x6 templates to get 1x 2x6. Have you heard of this?

[@booth.events3807]

Hi which printer do you have? Not all printers support printing a single 2x6. Also if you want a single 2x6 you'd need to use a template that is a single 2x6, instead of a 2x2x6.

[@massimodecarlo616]

I can do that with the printer ds620 too?

[@booth.events3807]

Yes the AirCast Pro II works with the DS620

[@vanceevans5405]

if it's airprint why does it need to be plugged in? so this means the ipad battery could die if not plugged into power while printing? if its not plugged in and uses the network how would that work different?

[@booth.events3807]

You can also print via wifi but wired printing is faster and more reliable. You can power the iPad while it is plugged in to a USB-C hub by powering the hub, usually by plugging in a USB-C cord with power into the hub. USB-C hubs typically have only one port for power in.

[@chilinfosho13]

So if I hard wire it to the iPad then I can connect the iPad to venue or hotspot wifi so that I can digital share at the same time?

[@booth.events3807]

@@chilinfosho13 Yes! please follow our help article for this: help.booth.events/article/62-connect-to-your-printer-and-the-internet-at-the-same-time

[@chilinfosho13]

@@booth.events3807 so are you saying it is possible to hard wire it with a usb c hub and connect other to power at the same time or its not ?

[@chilinfosho13]

*and Connect the iPad to power from the usb c hub?