This guy is very intelligent at marketing his product....great review bro,,,,thnx
@WintervalleyModels10 жыл бұрын
That's all very nice but how often do you have to replace the imaging drums and how much do they cost? I think it sounds a bit ridiculous that so much has to be replaced after a few prints.
@kubamiszczz2 жыл бұрын
should it work if i connect generic usb network wireless card (like TP-link etc) to this usb covered by wifi sticker?
@ronaldonery19633 жыл бұрын
bom dia estou com um problema na lexmark cs720 liga imprime quando entra em standby nao volta da um codigo diagnostiquei o problema na fonte de alimentação queria saber qual componente esta em curto abraço!
@voulahadjiathanassiou37475 жыл бұрын
does it go through a roller drum before coming out? Id love a back feed printer that can print on thin paper without jamming. Also need it to print card stock and envelopes.
@Printerbase5 жыл бұрын
Hi Voula, The Lexmark CS310dn will not print onto card stock or thick media. The highest gsm this printer will print onto is 163gsm. Yes, all prints will need to go through the roller drum before coming out this is why its limited to 163gsm max paper weight. I hope this helps Many Thanks The Printerbase Team
@MM20093 жыл бұрын
@@Printerbase I have had CS310dn and now have CS510de, both printed fine on 200gsm gloss, envelopes and print cards. In most cases both pull two pages at the time, which is obvious fault - not for lexmark people who are convinced their printers are "being lubricated" while in sleep mode...
@Buddi492 жыл бұрын
I cannot giet my Lemark to print in colors....???
@DoctorVince11 жыл бұрын
You say there is an option to upgrade it to 2400dpi. Is that with a memory upgrade?
@MM20093 жыл бұрын
I have cs510de which leaves blue pink and yellow dots 8n the same places. Any idea what needs cleaning?
@Printerbase3 жыл бұрын
Hi, this could be a few things. We mainly recommend checking the cartridges in case these are an issue and the rollers on the printer Hope this helps
@willdatsun3 жыл бұрын
kzbin.info/www/bejne/m6WYlqerh8lsh8k pcr rollers
@lifeisgood51004 жыл бұрын
I get aligned dots on my printed sheet WHAT I DO??
@Printerbase4 жыл бұрын
Sounds like it could be a drum or toner issue if it's printing unnecessary dots. I'd recommend getting in touch with the supplier :)
@willdatsun3 жыл бұрын
kzbin.info/www/bejne/m6WYlqerh8lsh8k pcr
@musmartin6 жыл бұрын
I have 2 questions, What minimum page can I put in the tray for it to be pulled? Does the fan keep spinning all the time? Thanks everybody.
@Printerbase6 жыл бұрын
Hi Akshay, thanks for getting in touch. The Lexmark CS310DN will accept paper between 60 - 175gsm from the paper tray. The fan will only spin if the machine is either warming up or printing, once the printer is in standby mode the fan will stop. I hope this helps. Many Thanks The Printerbase Team
@musmartin6 жыл бұрын
printerbase.co.uk Thanks a lot for your help. Sorry, I meant what is the 'minimum number of page' can I allow in the print tray for it to be picked up? And Lexmark offers a firmware upgrade. Should I consider this or is it better to stay away from it? My printer does not go to sleep nor does the fan stop spinning after printing, although I set these options correctly in the settings.
@magnacum20044 жыл бұрын
I get aligned dots on my printed sheet. Any advised?
@Printerbase4 жыл бұрын
Hi magnacum2004, Sorry to hear you are having an issue with your printer. I would suggest contacting the Lexmark Tech Support team on 0870 733 7100 who will be able to help. I hope this helps Thanks The Printerbase Team
@jenaefarrington99876 жыл бұрын
Is the printer borderless?
@Printerbase6 жыл бұрын
Hi Jenae, Thanks for the question, No, I am afraid the Lexmark CS310dn will not print borderless, in fact no laser printer will. You will need to purchase at an inkjet printer if you would like borderless prints. I hope this helps Many thanks, The Printerbase Team
@PixelatedTravelR9 жыл бұрын
Thanks for post this. Very thorough and informative.
@voulahadjiathanassiou37475 жыл бұрын
where is the manual feed tray?
@Printerbase5 жыл бұрын
Hi Voula, Thanks for getting in touch. The 1 sheet multipurpose tray is located at the bottom of the printer on the paper tray - there should be a black opening with curved edges. I hope this helps The Printerbase Team
@fcozio12897 жыл бұрын
11/10-IGN
@MM20093 жыл бұрын
CS310-410-510 have a big problem pulling two pages at the time, according to Lexmark they should stay ALWAYS on, because they are "being lubricated", in the sleep mode? - heh what?! Also PCR rollers are quite poor and fail after some time. New toner from aliexpress is each £24.30 -was free delivery , unfortunately after brexit you need to add £9.58 for the delivery and extra 20% VAT - thanks low IQ voters! Toner reset chip £12, but now extra delivery and VAT makes it nearly £20 plus toner powder! PCR roller kit £17 plus £9.58 delivery, plus 20% VAT.
@Printerbase3 жыл бұрын
Hi M M Thank you for getting in touch, that all sound very odd, with the shipping and the toner reset chip. Maybe try the Printerbase website, we stock cartridges on all the printers we sell and some old models too with free Mainland UK delivery, plus our Compatibles are ready to use... with no toner recycle chip. www.printerbase.co.uk/ Pop over and if you're trying a cartridge, use the code ADAM5 for some discount Thank you Adam
@willdatsun3 жыл бұрын
funny you should say pcr rollers, mine have failed on my 510, how is it even possible for all 4 rollers to fail at the same time, each with one defect, same size on each roller, but a different distance across. i suspect a conspiracy!