COMPLETE Suspension Tune + Corner Balance! 300zx build

Although I saved this Nissan 300zx z32 project car from the junkyard, I have been building the car into an ultimate driving machine. Today we build and refresh the 300zx rear end with new arms and bushings. Then install new tires on the ADVAN RG2 AND LMGT4 wheels so the car is sitting correctly. Then ‪@Ooo_dang_jesus‬ sets up the Z32 in his garage alignment rack and corner balance machine to dial in the z!
Outro Song: Thisistoodifficult - Used to You
PrizzaMerch:
prizzamike.mys...
Become a Member to access perks:
/ @prizzamike
Spotify Playlist:
open.spotify.c...
For more behind the scenes:
Instagram: / prizzamike
TikTok: / prizzamike
Snapchat: @prizzamike
Discord: / discord

[@DingDongDrift]

"when they're rock hard they're a lot easier to pound into the holes" i strongly agree Mike.

[@PrizzaMike]

💪

[@isnowyazn]

Your name fits LOLOL

[@DingDongDrift]

@@isnowyazn i always fit 😉

[@Cars_are_good]

i mean... he did also say "cant go in dry. especially on these... oversized cylinders"

[@ethanmiranda626]

Bro I heard that and was like ayooooooo

[@joesaiditstrue]

friend of mine was a huge fan of Nissans, he lived in Japan for a while and owned a RHD 300zx, sadly he passed away June 2023. he would love your videos, rip Mike

[@free.k6ry83]

Rip

[@ToyotaRanger]

Rip

[@stron400]

Rip:(

[@chrisyarber3352]

Rip

[@jamiereddy6128]

Rip

[@fernando2jz]

Dude has an alignment machine in his garage. Sick.

[@PrizzaMike]

@@fernando2jz garage goals

[@domthe8.669]

Rides with Tim seem life changing😂😂😂

[@PrizzaMike]

@@domthe8.669 definitely will cure any sort of depression 😅

[@sir_wheat_thins]

the extra weights on the subframe is for NVH, the added mass helps dampen or cancel out some type of vibration or resonance that existed. It's probably something specific to 2+0 vs 2+2, or TT vs non-TT cars given that the former spec affects driveshaft length and the latter affects which diff you got. that all impacts vibrational harmonics and some combination was probably deemed too "harsh" for the tourer car vibe Nissan was going for.

[@PrizzaMike]

@@sir_wheat_thins wow great point! Thanks for the info 🙏

[@ryan302turbo]

didnt read this before i said anything lol

[@Arkay777]

Gotta say, it's pretty impressive that you know this, this is the kind of car knowledge I like!

[@v3lvet243]

I cant get over how sweet that engine bay is!

[@Unlaced_kickz]

Mom , what’s for dinner frozen 🥶 subframe bushing !!!

[@miketalleyvlogs2313]

"

[@screamerchaotix5182]

2:47, remember to always Safety Squint™

[@pyronical]

I'm in New Zealand, I was a teenager when these cars were brand new. Most of ours were direct Japan imports and we often saw the green rear logo. Many of us considered this our dream car.

[@jaxyn_b]

the yellow insert sheet in that fairlady catalogue is from Nissan Prince Kanagawa Sales Company (Nissan Purinsu Kanagawa Hanbai Kabushiki Kaisha) January 1997 (9th year of Heisei era) and it's for ordering a Z... maybe obviously lol the bottom parts are a bunch of options which are discounted if you but them as a set. some are for 2-seater and some are for "2 by 2" (guessing 4 seater) stuff like floor carpet, fireglaze paint (?), safety kits (hazard sign, booster cable, "rescueman" (idk what that is)), GPS navigation

[@PrizzaMike]

@@jaxyn_b WOW that IS SO SICK! Thank you for clarifying!

[@jaxyn_b]

@@PrizzaMike yeah it's pretty awesome to see hahah, small insights into how it was like... if i had the time i'd like to take a crack at actually translating the whole catalogue

[@jayrx12]

prizzamike freezer reveal, letss gooo

[@Cobra_427]

Thank you, seeing those sales brochures made me open up ebay and snag all 4 years of early S197 dealer brochures, you're not the only one that likes stuff like that

[@EphemeralFaerie]

Mike that feeling that your getting much closer to paint on the z must be pretty exciting, also i wish the roads around my place were as nice as yours i be needing an alignment like every 4 months

[@MadiJamesZ32]

the love hate relationship i have with being early is wild. I'm so grateful that mike has posted but then left bored for the rest of the week til he uploads again XD

[@ryanlee6881]

@@MadiJamesZ32 for real! i do it every upload 😂

[@Lewuaptedama]

😂 yeah thats usually the case with me as well!

[@brandoncrowell5116]

one of the most inspirational content creators ive seen, i have never been so motivated to work on my car than after watching a prizza mike vid. Keep up the awesome work cant wait to see more 240 content!!!!

[@kevinbirmingham3833]

Found this channel a few months ago, glad I did. One of my new favorites. I love how everything is done in garages and driveways, it has a real feel to it. Looking forward to seeing the day the channel does blow up and funds a proper shop, proper carcaine, proper auto adventures!

[@SataniaMcDowel]

Dont have a Z but subbed. This was better than whatever big budget channels are doing these days

[@moleratking1321]

every time i watch your vids it makes me want to work on my 2002 mustang

[@regiw0lfe]

I gotta say, really digging how the curve of the spoiler matches the upward flow of the bumper 🔥

[@richieditta5167]

Mike you need your own shop!! Frame machine, lifts and paintbooths!!! I can't wait!

[@morrisdc5814]

i can’t believe this car has come this far so quick

[@blackinblue11]

As a fellow very limited garage space wrencher, and also very nerdy about alignment, I love how the dude made pro alignment setup work in a home garage. Passion makes it work with what you got. Love the channel, keep it up

[@therestingmitchface6241]

I love seeing the dealership catalogs for cars! An internet friend found me some for my 99 Accord so I keep them in the rear pocket of the passenger seat

[@acjones39]

The LMGT4s go so hard on the 300zx.

[@EvelynSalazar-z6i]

That why you make look so easy but I know its what really hard job what that's why I love seeing your videos because it makes me work on my own car because of you you are a legend in my eyes God bless yo and your family and friends keep doing what you love doing keeping us happy and watching your videos❤❤❤💯🥰🙏🫶🤟 you rock

[@Ryoneftw]

Naaah, those turbo sounds are just **chef's kiss**

[@M-F-CORGI]

i love how simple nissans are. makes working on it so much fun

[@Vi_steppa23]

7:47 “cant go in dry” ok bud😂

[@devonmiller5561]

Bro I’ve been watching your videos for a hot minute now couple of years and I got to stay bro you got me checking marketplace for 300zx😂 I want one now

[@nothingleft99]

thanks for all the effort in these videos, always watching, one of my favorite channels out there

[@Kleebs_funhouse]

You always manage to post on the days I’m working and the video is just long enough to watch on my lunch break! Thanks for the entertainment, Z’s looking great, keep up the hard work

[@oOTevtronOo]

Cant wait for this car to be painted its gonna look so awesome

[@IzzeeeGTAS]

I just imagine a computer game based on your life. Something like need for speed, but you don't really have tuning shops, just a couple of your friends houses with different abilities, such as wheel refreshing, chassis alignment, body work, engine upgrades etc. During the career mode you can make different yunkyard runs to find rare parts or new projects. This would be a really nice game I guess. I would buy it xD official PrizzaMike game

[@5thAve_Ricky]

Definitely loving the Z, I went with my uncle back in the day when I was a kid when he got one new from a dealer.

[@ssquiggss]

The 300 is still getting even more sick, very nice Mike!

[@snowflake7233]

the 240 ZX is coming along soooooooo good!

[@scottej1856]

Never been a fan of 300z's but the side shot profile at 30:45 looks SOOO good. Cars looking amazing 👌

[@battleaxe1985]

fun fact, those rear lcas are pretty well the only option for stock arms, the rest are the full heim'd ones. the oem replacements went out of stock long ago :/ those s13 stance subframe bushings are quite short for that subframe ?? :/ Jesus' alignment/lift setup is peak creatibity and useability, thats the first home setup i have seen and has given me some great ideas for my own. hell ya

[@kylegass646]

@PrizzaMike .....i dont no jack about cars but i love watching your very informitive videos! Even though its all in one ear and out the other its allways a blast 😂 allways pumps me up and i enjoy playing some driving games after and fiddling with suspention settings. Keep up the great work and amazing content as well as vibe much love from California

[@YungHunnna]

12:31 tims face of pure fright

[@Arkay777]

Dude I absolutely love the way the z is coming along! That wing is too sick! 😍

[@Chris_Lastname]

Keep an eye on those subframe mounts Mike. The frame will probably chew into the body, without any bushing top side. You could always get some larger 2 piece poly's, machined down to fit. Shame the other ones didn't fit without the sleeve

[@braydenmccall8948]

u and jimmy are my favorites gives me so much motivation to keep working on my fc and get it to the track for some seat time!!!!!

[@rew3809]

The 240ZX is coming together!!!

[@tomadams8914]

Your wheel fitment stresses me out, you are doing crazy close stuff...Brooklyn guy here, I am sure if I did that I would have issues, roads are trash here. But, hey, it looks amazing, always in awe with your endeavours.

[@Lewuaptedama]

I love those nismo wheels❤

[@rcstarz5206]

Shiny new parts is always fun 😊

[@Saabkid900TT]

that mini lift is sickkkkkkk.

[@hiimelvin]

You can transfer those plastic shields over to your new LCAs

[@ozzyvalle1038]

Thank you for posting these videos, brother love coming back home from a hard ass day from work and these videos come up makes me work on z

[@Benniesgarage]

Tim is a g for real

[@PrizzaMike]

Tim is in a g for real 😎

[@Texas_ghostface]

Now to paint the z 🔥🔥🔥🔥

[@alriciab.p.7936]

Bro that took all day to do alignment 😮 wow. Alot of work

[@stephngibson5517]

Love you channel man there is nothing else like it on KZbin

[@gateaccess818]

this alignment guy, needs to get with the 3d printer guy to scan his tool (that mounts to wheels) to have a mount and some arms designhed and printed up. that way he can attach to the edge of the wheel lip like most alignment jigs

[@PrizzaMike]

Great idea actually

[@Dewree69]

Hey man, everytime you see a weight added on to a part (except brake discs and calipers), it’s almost always to cancel out some sort of NVH. I was blown away, when I found a 4 lb weight on a rubber mount directly on my diff, and my friend told me that BMW adds that to every car, because of some vibration at a very specific speed 🤣 it’s all just weight, no worries in deleting it!

[@757KY]

That catalog is badass!! need to find those for my cars!

[@RapyArtz]

That's wheels on the front is crazy good bro you just stick with that

[@grubling1494]

I'm so excited to see this build finished!

[@QuattroWayne]

Just the fact the s13 bushing worked goes to show how similar the z32 really is I truly believe the z32 was just a s13-Large 😂

[@Papajin68]

This is like deja vu... dropping the rear subframe was one of the first things I did on my S13 project **mumbles** years ago, including the frozen urethane bushings... I vaguely remember wondering if you were supposed to leave the outer sleeve in place in the video where you were removing the old bushings, but I seem to recall there were differences in what to do with the metal sleeve depending on if you were using an S13 or S14 subframe.

[@jamesvesely131]

I love how this car is coming along. Such a fun journey.

[@ILikeGalaxyBars]

I always find if its Rock hard it's easier to pound the holes lol. But on a serious note you are probably the only car content channel that I watch all the video keep up the great work

[@adrianncharles436]

Man this Z is coming together nicely I’m so happy for you man love the vibes on this channel you are now my number 1 KZbin channel don’t watch the others that much 😅 keep pushing

[@Australian-q8s]

Love how the Z build is going keep it up

[@H4nz0-17]

Hi, I like your videos, it's interesting to watch you and the perfection of your cars, with love from Russia.

[@rosstihh2220]

7:38 Bruh..... Got me of guard again... 😂😂😂😂😂😂

[@420architecMindNDesign]

my favorite car in the fleet

[@tristan8243]

the most baller alinment setup ive ever seen

[@bryantgarcia4517]

Putting in work! 300sx is coming along!

[@ExV1rUS]

Banger video as always bud! Hope you had an amazing day!

[@VERTEXISO]

This is an amazing video

[@kingcuhhh5832]

Buddy turn that shit up to 15 lol my nephew was running 15psi on his car and he was loving it motor ran like a top for a year straight of him beating on it now he went rb ❤

[@tiberius5389]

Love when is "rock hard and easier to pound in the hole" Lol

[@disfordrift9593]

Your killing it bro

[@summer_salad69]

I admire your ability to not laugh when saying things that sound suspicious

[@ahd4415]

got me celebrating your uploads bro love your content

[@8Bitplus]

Another classic! Great video. Im hoping on buyee to see what cool stuff i can find!

[@ryan302turbo]

the extra blocks on the rear subframe is for vibrations

[@tougedriver425]

Cool thing make rusty diff look nice is to clean it a little with wire brush, and put some rust converter on it that contains some fosforic acid. It's transparent when you apply but after few minutes it changes rust colour to black. Not perfect solution but definitely improves look. At least for some time 😂

[@3kzack]

I bought from buyee a couple weeks ago, I was buying a fan for my car and it was 90$ here, in Japan it was $19, I won the auction, they shipped to buyee and tacked on $21, cheapest international shipping would’ve brought it up to 90$ and it would’ve taken a month maybe longer to get to me.

[@s15melb]

So it was a waste of time then?

[@3kzack]

@@s15melb buyee charges a bunch of hidden fees, they’re a bad middle man, but I don’t know of any other sites. If you strictly can’t find any parts in the US, then buyee might be your only choice. It’s just expensive.

[@Legacy75100]

0:25 We just gonna pretend he didn't just say that? lmao

[@psementalist]

Goooooood morning PizzaMike your videos makes my weekend watching your KZbin videos

[@DBRCustoms]

Buyee is a great option, I follow another creator who does rc car stuff and he turned me into it.

[@josiemissel6067]

your car sounds cool

[@matteopodrebarac9356]

You’re the best man, gonna be a good dang watch!!!! As always

[@OutsideWithZIO]

Id like to see the z with a livery(wrap) instead of paint. Would be sickk

[@shogunemperor]

Its funny how Tim always has food everytime he see’s you… LOL

[@joey.350z]

peak vid love ur content, best yt channel out there!

[@NedlohB]

“Very gently”7:39😂😂😂

[@YaMi-cn9mr]

hey babe, new prizzamike upload just dropped ✨

[@daltonkelley7929]

I think you should wrap it a solid color

[@fortunesk89]

2:54 safety squints engaged

[@02lucy666]

Man... Once this gets a respray, it needs to be all green! and that illuminate (I assume at least its a light up plate, hence its green, extra lighting, mostly for positioning lights like the fender lights on JZX or the SILVIA rear side windows light up green) 300zx rear fascia? thats money!

[@myredundantlife6522]

So sick thanks for the video!

[@nowinczak]

It’s looking great, 👍🏻 some matching paint soon 😂

[@Nanta_Ajja]

🇮🇩😢😉aku selalu hadir setia menonton vidiomu👍🇮🇩

[@thomasmurphy5906]

Nice work!

[@SamTyler-zu7lc]

Man subframe and arms and new parts just looks so sick. Powder coated stuff that's in something other than black always looks sooo much better black is just boring lol if it's getting painted why choose black when you have a whole range of colours lol

[@Z32andCG6]

Quality content as always