PRL High Volume Intake [HVI] Install & Review 2022-2024 Civic 2.0

PRL High Volume Intake (HVI) Install on a 2023 Honda Civic Sport with 2.0L K20C2 Engine.
Modding The Stock Airbox: • OEM Airbox Mod | 2022-...
OEM Intake Res Plugs: www.racebuilds.com/l/hpomyc/1...
PRL HVI Intake: prlmotorsports.com/products/2...
Injen X1128 Air Filter: injen.com/i-30497707-injen-te...
Filterwears Pre-Filter K335: filterwears.com/products/filt...
Please see time stamps below:
0:00 - Intro
0:19 - Component Review
2:13 - Injen DryFlow Filter Upgrade
7:08 - Design Thoughts, Things to Keep an eye on
8:45 - Stock Engine Movement
9:13 - Stock Modded Airbox Sound
9:55 - Intake Install
21:21 - Finished Install
23:01 - Sound Before & After
23:21 - Test Drive

[@abraham3981]

I like the attention to detail and the amount of work you put into your videos. Great content for folks who own Hondas and even for all other car enthusiasts.

[@McDzy]

its always a good day when NAUS download some premium content

[@stevenr1354]

I may have mentioned this before but the Road and Track article "The 2016 Honda Civic Coupe Is All You Need" talking about the NA 2 liter and manual transmission combination summarizes the appeal of your car. Future classic.

[@CrossKnight]

Your videos are so well edited and professional. I love your details/input and deviation from other youtubers. This motivates me to some how add more engine/induction noise instead of a loud exhaust to my 22 Corolla Hatchback 6MT.

[@NAUS2K]

Thank you I appreciate those info words / feedback! Comments like this make me keep doing this kinda stuff

[@GenesisBRZ86]

Some vestiges of the old Honda are still alive! Thanks to your videos, I ended up with a 24 Sport hatch...with the CVT. At least it's the same color. I love the car. So far so good. The only big issue I had was self-inflicted. When I replaced the reverse and turn signal bulbs (the same ones used on my 10th gen), I ended up popping two fuses on the BCM, which freaked out the car. What's worse, whoever did a hard reset failed to tighten the positive cable. Either way, Im happy with mine.

[@norbertorosado6016]

Another high quality video. I appreciate all of the additional commentary. I’m always learning something new about my car from your videos. Keep up the great work. Cheers!

[@albertthe3rd904]

I don’t even have this car but I enjoy watching your videos because of your ability to explain in detail and accurately what you’re doing.

[@pedroc6823]

looks a Looks stock in the bay, I like it. Just enough to make you smile.

[@eric9249]

I give you a thumbs up for your presentation! After watching, I don't think I'd bother with any intake on this car. The OEM piece seems well designed to me, and, I can't pick up a significant difference in tone! The only mods I'm contemplating is a 93 octane tune and possibly lowering it an inch. When I destroy the OEM wheels, (inevitable on NYC roads), I will upgrade to a lower weight wheel/tire combo. End of mods for this car!

[@jaymingles]

Right now I have the Stage 1 intake kit from PRL (which is the same as this, but it only comes with the inlet hose and upgraded drop in filter) and the stock resonator deleted. I was thinking of upgrading to the PRL HVI box and cone filter since you can buy all the parts separately on their website, but if it's only a slight bump in intake noise, I'm gonna pass for now. Thanks for sharing and making my decision easier!

[@NAUS2K]

Yeah, imo keep your setup, not worth the extra money . Be mindful of that oiled air filter though. I’d consider going back to an oem style filter if I were you

[@jaymingles]

I'm actually gonna drop the stock one back in for now. Didn't realize how sketchy the oiled filters were. It made no difference in the induction noise anyway. Only the inlet tubing changed the sound a bit.

[@thumperjr100]

I think it sounds pretty darn good compared to stock (prior to your first mod). Fun car, especially with manuel trans. I have a 2024 Si as my daily. My Ford Raptor is my Sunday drive vehicle. Great content, enjoy the channel.

[@DivRogue]

Great channel. I have the exact same car so I love watching these videos

[@JT-dm1cs]

I don't have this car, but I love the content! keep up the good work!

[@dylanmartinez2157]

Please keep up these vids! Looking forward to the other mods in this car bro

[@eliezerjoseph4954]

Great video man, very informative and beneficial.

[@ashishshrestha9805]

Hy NAUS! I just got brand new 2024 honda civic sport hatchback (automatic) today in sonic gray. I was looking for a sedan. But as every guy that looks for the reviews video before buying anything, I came to your vids and watching your car, the hatchback really grew on me. let’s hope I don’t have to face the hatch leak or bolt loose of the transmission in future 😅. But anyway I’ll be watching your video for any mod’s I’ll adding on car.

[@stevenr1354]

Great video. All meat, no filler 👏👏👏

[@NAUS2K]

That’s my style!

[@-LucasFishing-]

You should do a oil change DIY video!!! Great video my man👍

[@NAUS2K]

Got my first one I’ll be doing on the car coming up in less than 1000 miles so maybe I will!

[@juddosborne305]

Clean install

[@NAUS2K]

Thank you!

[@CP2Ty]

Can’t wait for the Ktuner vid

[@eric9249]

I've been hoping for the same! Other Ktuner vids I watch - I can't get past the 1 minute mark!!!

[@Queso305]

I really want one of those civics!

[@benbryceholden1]

Nice install, doesn’t look too hard 👍

[@denttime]

I just changed the air filter itself and saved myself all the fluff. But I get it. People want it to look like it makes a difference. Great video as always. - by the way don’t get an oiled air filter - specially you turbo civics. 😉

[@scottmallory3507]

Thanks for another great video with easy to follow instructions. Switching out the included filter for the upgraded one for more protection and to prevent rusting is very wise! Did you ever do this mod on your 8th gen civic?

[@NAUS2K]

My 8thgen civic had a hybrid racing intake the majority of its life with an AEM dry flow pre filter. Both in my all motor setup and supercharged setup

[@LowcountryMan]

Cheers

[@amshootez]

Very organized, well thought out install. The air filter you spec’d is a must do, thank you! Are you doing anything with exhaust? I’m considering a cat-back system, with a glass resonator. Maybe I’ll get 160 BPH - lol!

[@NAUS2K]

If someone came out with a clean single exit and quite deep mature tone I’d consider it. Problem is no one has made a rear diffuser to support a clean single exit yet . People that hang the cans under the stock rear sport diffuser I think is hideous

[@juddosborne305]

SCIENCE !!!!

[@willlivm]

What are your thoughts on air intake snorkels/can you make a video on it if u ever get one. Great vid

[@marthcjm9511]

I’m thinking this one or the k&n filter I just don’t know which one is best for sounding and a little bit more power

[@TheNando...]

Do these Hondas with the naturally aspirated engine have a rear engine motor mount? I noticed the engine was moving a ton when you were getting on it, obv I know it’s no sports car but it made my 18 Si so much smoother back in the day

[@NAUS2K]

Yes it has a rear motor mount and my next video will be the upgraded PRL mount, stay tuned !

[@mattmcdowell1218]

I know there’s not much as far as hp gains to be expected but does it improve the throttle response any or change the feel on acceleration?

[@NAUS2K]

You can hear the engine more when you stab the throttle, so it may make the experience feel like it’s more responsive, but definitely a placebo. The only way to improve response would be a remap on the ECU (Ktuner) or similar

[@g-low9812]

I just bought some black RFP1s 8” rims w/ 235/45/17 tires for mine. I will probably try to make a vid on the switch once I swap em out. Aesthetically I know it won’t look the greatest but I think it should be a decent upgrade comfort and weight wise since the stock rim with tires weigh close to 52lbs. Interested to know your take on that.

[@NAUS2K]

Lightweight wheels are always a good upgrade!!

[@AP1GO9K]

Should swap a K24 in there haha

[@zuggerat89]

Then we could call it an siR!

[@juddosborne305]

Any horsepower gains ?

[@Theanswertomylife]

So if I use the filter that comes with this PRL kit,is it no good ? I also daily drive mine. (2024 Civic 2.0 CVT)

[@NAUS2K]

No that’s not what I said, it just won’t filter as well as the setup I described, your choice!

[@AmTechTankLining]

WIll these parts not so much PRL intake but the plugs and filter for a 2023 Honda Civic Type R - FL5?

[@NAUS2K]

Plugs, probably not. Intake filter? Maybe, would have to look up the specs for the filter supplied with the FL5 hvi kit

[@psewgobind]

If you manage to get some noticeable gains out of your mods, I might have to put the K20C2 back on my shopping list.

[@NAUS2K]

Well you’ll only have a few more months to get one brand new before the hybrids take over

[@psewgobind]

@@NAUS2K sucks. Used 10th is an option (lots of available 6mt with k20c2), but i feel that gen needs a more beefy front end for track use. Seems like they made 11th chassis a little stronger which is necessary for front axle in track use. Wish they had an Si with K20c2 engine, so that chassis/suspension structure wouldn’t be an issue if you were to make it into dedicated track car. 1.5T not ideal since it’ll have to quit the track after a few laps and K20C2 can go all day long.

[@NAUS2K]

Currently transforming this car into my version of a hatch Si! Stay tuned!

[@brenthall6554]

The next time you have the airbox out, do yourself a favor and change the trans fluid to Ravenol MTF-2. Much easier to shift when cold, and when warm, the shifter clicks into gear much smoother than whatever Honda puts in.

[@comba5858]

Will you also do an ECU remap so you get the best of the new intake?

[@NAUS2K]

Yes I have a Ktuner v1.2 on hand, that will be a future video!

[@danielandrews7028]

I’d probably go with a drop in k&n. Even in a 3.5l Nissan 350z you would not get any gains over the stock airbox

[@andylam4350]

I’m a little bit confused when you said “daily driver not chasing gain” so what’s the point installing this aftermarket intake then?

[@NAUS2K]

To wrench on my car, bring you guys this content, and make it sound a little better. Who doesn’t like wrenching and personalizing their ride?

[@andylam4350]

@@NAUS2K I appreciate you uploading videos. I wasn't trying to be negative but rather trying to understand why so many people spend lots of $ to add an aftermarket intake but don't expect gain that's all.

[@NAUS2K]

Yeah it’s probably the mod I needed the least. Stay tuned for the next few videos, the next couple mods I do to this car I’m super pumped about

[@moisesd8170]

You planning on adding an exhaust in the future?

[@NAUS2K]

There are no good options for a single exit , I do not plan on doing a sport touring rear diffuser on it and one of those obnoxious dual exhausts. If there was a quiet single like the Q300 or quieter, I’d consider it

[@MrZamberto15]

Would this be a good fit for the sport touring?

[@RANDOM-zc2bs]

I bought one from 27won for a touring sport hatchback sounds great it was 200 bucks

[@hillbillysportsman5818]

Does this void your warranty?

[@blacksongoku312]

Only if it causes problems (Check engine lights, etc). I have a cold air on mine & in the rare times I did go to the dealership, there weren't any problems.

[@jorgetadeo510]

How many miles you have on the car now?

[@NAUS2K]

Just crossed 7000

[@jorgetadeo510]

@@NAUS2Kyou recommend upgrading from 2021 cvt sport hatchback?

[@NAUS2K]

If your looking to upgrade to a manual transmission sport yes, cvt no, keep what you have

[@jorgetadeo510]

@@NAUS2Kyeah I was looking at the manual

[@brenthall6554]

Buy it now. Very hard to find. Less than 50 usually nationwide for sale.

[@BboymaYnard0]

Does the plug make any difference to be honest?

[@NAUS2K]

Watch the link in the video, all the details about them there!

[@BboymaYnard0]

Yes I watched it all. Information was great. Thinking of purchasing your plugs since you were the first I saw that ever made it for our models. but idk if it would make any difference since I have the PRL N1 exhaust and high volume installed.

[@NAUS2K]

If you have the hvi installed no point in buying the plugs unless you just want to close it in so dirt and debris don’t accumulate in it

[@BboymaYnard0]

@@NAUS2K yah I rather the plugs so I have less dirt and debris. Cleaner the better!

[@BboymaYnard0]

@@NAUS2K just did the purchase today! Once again thank you for the knowledge and how you breakdown the products with the 11th Gen. Excited for any products coming in the future you’ll create for the 11th Gen 2.0L hatchback models!

[@juddosborne305]

Sounds like an Si now

[@NAUS2K]

The only sound the Si makes is from the speakers in the car, otherwise the 1.5t sounds awful

[@juddosborne305]

@@NAUS2K I’m sorry, I should’ve been clearer. Sounds like my 2008 Mugen Si I had.

[@NAUS2K]

My bad haha, when I think someone thinks the 1.5T sounds good I get triggered. 08 mugen Si is one of my favorite Hondas of all time. Absolutely beautiful car with an engine with incredible character and sound.

[@juddosborne305]

@@NAUS2K understood 🙏🏼

[@jaimegutierrez5520]

I'm own 2017 and is more quick than 2024 honda

[@konstantinostselios1129]

This is all about sound your not getting any extra power and your engine runs hotter with that filter unless you take it to the dyno

[@NAUS2K]

Please explain how this air filter is causing the engine to run hotter…

[@konstantinostselios1129]

@@NAUS2K you can hook an OBD scanner that is capable of reading your engine temperature willing running and tested with stock setup and aftermarket setup this usually happens because your air temperature sensor reads different suck a little cooler air and raise the engine temperature so check it out

[@NAUS2K]

Both the stock intake and this intake use the same air duct to the front grill. The intake air temps will be identical. An air filter doesn’t change the temperature of the air

[@juddosborne305]

0-60 in 7 seconds ain’t bad

[@brenthall6554]

Did I miss a 0-60?

[@juddosborne305]

@@brenthall6554 when he turns into the highway, I counted 7- might be wrong.

[@alloyworks4107]

Hi Friend, Your vids are awesome! We specialize in the production of automotive radiators, heat exchangers, and cooling system components. I've been watching your videos on KZbin and really like your content. We're wondering if we could collaborate. Would you like to put our products to the test and review them on your channel?

[@Juliangutierrez81]

Is this carb legal ? I live in California and I’ll get 25 to life in prison for having any mod on my vehicle. 😢

[@NAUS2K]

I’m not sure, reach out to PRL to see if so!

[@real_ultrajoe]

K&N filter probably flow better in my opinion

[@NAUS2K]

Better than what? The PRL? They are basically the same thing, incredibly thin filtration media coated in oil

[@A-GoldenBar]

I don't hear no shssssst, pssst