PRL Motorsports High Volume Intake System + Dyno Testing!! | Civic Type R Build Ep. 4

Ahh yes, the light at the end of the tunnel. We now have all the bolt-on goodies installed on our Civic Type R. Thank you to our awesome friends over at PRL for the High Volume Intake System and various other goodies that we've put on the car over the past couple of weeks. Now that we have a full bolt-on set up, what better time to do some Dyno Testing!! Check out the full video for the full results.
Look for PRL parts for your car? Peep the link below!
PRL Parts: bit.ly/2JF5KjM
Follow Charlie, Tiny Kyle, and Kevin on IG:
Charlie: / map.charlie
Tiny Kyle: / kylelatmap
Kevin: / baselogger
Subscribe to our KZbin channel: / @maperformance
Follow us on Instagram: / maperformance
Facebook: / modernautomotiveperfor...
TikTok: vm.tiktok.com/...

[@chandlerboyer9154]

See this is the reason why I love you guys. You guys are professional but like not trying to be over the top way to professional like every other suit company out there. You guys are raw. True people. Why I keep buying your stuff. It's REAL.

[@maperformance]

Awesome feedback Chandler! Thanks for watching 💪 We def like to have fun!

[@chandlerboyer9154]

@@maperformance always watch you guys. Keep it up brothers ✊

[@vietusa74]

@@chandlerboyer9154 What were the before and after numbers? Apparently, I missed it in the video.

[@vietusa74]

@@chandlerboyer9154 I am asking you because you thought they did such a great job. A couple of people asked for the numbers in the comments but MAP didn’t bother to reply.

[@johnthor4999]

If you tell me the hp numbers after the pulls, I'll subscribe.

[@axelreyes2935]

Exactly

[@immickey9318]

Stage 2, Intercooler, TE37 and you guys built my dream car.

[@tcmbrown]

Never liked a video that didn't show and tell results of dyno test.

[@SoFaKiNgNaStY5809]

what ended up being the hp and torque after the mods ???

[@axelreyes2935]

Exactly

[@phonglam4889]

Nothing 😂

[@ryananderson5996]

If you order honda data flashpro you can buy the unlock for the ecu already installed you don't have to send it off anymore

[@SubaruRSFan]

That’s an extra $250 btw

[@georgegomez7173]

Nice upgrade performance on PRL for Type R on Dyno! You should try Hondata or K tuner to see how much gain on hp and torque. Plus need to buy an upgrade intercooler.

[@JustCallMeDope]

PRL ftw 🔥

[@teimurazmosashvili3739]

Cant see.. How much gain and how much HP?

[@fastlane2914]

Did you guys disconnect the battery before the intake install?

[@brianizzo4509]

Gentlemen. I enjoyed the video. I didn't see the videos prior to this so I have a couple questions: 1) was that the street MAF or the Race: no codes would suggest street. 2) I haven't found the PRL inlet pipe in black. Did you have that ceramic coated? Or is that a different inlet? 3) if I read the dyno screen correct... does that have the AWE Touring exhaust installed as well? 4) looks like average whp was in the mid 3_ teens. With no ECU work. Appreciate the knowledge. I'm trying to build a 2021 and I have the PRL down pipe and HVI. Trying to determine on the intake to go street or race. And still trying to determine the front pipe and exhaust. Looking at ARK, MAP, and AWE. Your experience and knowledge is welcomed. Thanks.

[@jontune-upsmaintenance4457]

So what was the number stock. In compare to the number now? So how much more did it make?

[@mikeb3023]

Apparently it's a secret dude

[@Migerk1]

On my third year of pharmacy school only one more to go and then I can get my dream car the honda civic type r.

[@maperformance]

Keep up the motivation!!

[@theone3113]

Hey, I think ur the guy from the other video where he calls asking for type r’s that I was chatting with? The year will go by quick I was able to sell my car and I just got a 19 cw

[@ehren-foley]

I thought pharmacists all drove Corvettes.

[@theone3113]

@@ehren-foley that’s towards the end of our career

[@been2damoon660]

I'm a pharmacist driving a type r. I didn't get one until 4 years after being a pharmacist though. I drove an RSX for the longest time before getting the CTR

[@chickfamily659]

Hope you used blue loctite on the screws holding that air box panel on. I didn’t think I had to and lost two screws.

[@calvink3081]

so no baseline.......whats the point...

[@anthonymaldonado8018]

Didn't get a chance to see torque but it looked pretty similar to the horsepower. Low 300s for hp/torque is pretty nice. With a tune I on pump gas I would think 370-380whp and probably around 400wtq

[@dougbali3314]

What are the numbers? We can't see the chart clearly.

[@fastlane2914]

What are the numbers then?? I’ve heard it’s restrictive and you lose HP

[@94livin]

Was this the standard bore or the big bore HVI?

[@balancemode4112]

😍love it

[@randmtsk7512]

Have you guys tuned this yet? Have numbers?

[@joshandlaurenjones348]

What exhaust do you have on that Civic type R just curious, looks/sounds great!!!

[@romariosmith422]

Maperformance

[@k20a15]

When’s the tune coming ?

[@stevecreps3960]

Scene on computer was crap and never started numbers. What a waste

[@gladyssimo1]

You guys after one year of showing this video have not even told us what the numbers were. I don’t understand why you won’t relinquish information

[@platinumtrained3527]

…… said he was going to go over the numbers but you never even told us the hp gain from it……

[@richardpica6577]

Sorry I didn't see or hear any numbers

[@vietusa74]

Did you guys really expect people to read the numbers on your computer screen that you flash for a second? Even if I pause the screen, I can’t read it. What was the point of this video if you guys don’t just tell us the before and after numbers? I saw a couple of guys asked for the numbers in the comments but you guys didn’t bother to reply to them. Geez 🙄

[@maperformance]

That is definitely our blunder! Here are the power numbers in order of the pulls we conducted: 306.15hp/303.46lb-ft 294.41hp/295.72lb-ft 312.84hp/307.97lb-ft 319.76hp/305.45lb-ft 320.55hp/312.11lb-ft 313.51hp/unknown :(

[@juliendhont9667]

So no chance to gain some HP with this intake... :(

[@mikeb3023]

These guys didnt even bother reading but one of the comments apparently

[@axelreyes2935]

Literally unsubscribed cause they gave us every bit of information besides the numbers 🤦🏽‍♂️

[@robzentai3458]

what a bunch of hacks

[@kylelarkin5677]

could you elaborate on your comment?

[@TheSocialPraxis]

@@kylelarkin5677 probably an old disgruntled employee with a fake account lol