Pro Cut Brake Disc Skimming | EBC Brakes

[@pfuxamutirikhotso4094]

Seeing this process unfold is truly satisfying.

[@EBCBrakesUK]

So satisfying! 😎

[@raymondbrett415]

is there anywhere in Sussex that offers this service

[@mikecurtis2585]

Great machine that's the best way to turn rotors. Thanks 😊🙏

[@linkmarine]

Do you have anyone in the Dorset area? as my car developed brake shake only after 500 miles or so since the installation of EBC GD Sport Brake disc and yellow pads as well as new callipers. Thanks

[@EBCBrakesUK]

Hi Matt, drop an email to our technical support team at [e-mail] and they'll see to your issue.

[@RS-jb1lf]

Amazing but does this not compromise the cooling of the disc? Given the thickness is reduced, is the disc more prone to heating up and introducing fade under repeat stops?

[@EBCBrakesUK]

No, it only takes a very small layer off the disc. You would never cut down to anywhere near the minimum thickness, meaning there is no compromise to the cooling for the disc :)

[@186scott]

Also brake fade only occurs with drum brakes unless there is air in the back pipes

[@samellio]

Saves time and money for the customer, must’ve cost a fortune for you though. Great vid guys 👍

[@EBCBrakesUK]

Thanks 👍

[@bernardwarr4187]

If you want to reduce run-out on any cars, it’s got to be the way to go?

[@achraf9946]

Hey Ebc I need help, I drove a Mountain down and my Yellow Stuff brakes went very hot since them they start to fade with the first brake from higher speed like 130mph to 60mph. What happen?

[@EBCBrakesUK]

Hello, sorry to hear that you are having some issues with the Yellowstuff compound. If you would like us to look into this for you please do get in touch directly and one of our advisors will be able to assist accordingly. Please email - [e-mail] - Have a great day.

[@Grunt49]

In US we say turn the rotors.

[@fasthracing]

Right and?

[@James28R]

that, is a cool story

[@yusuflbs7535]

Great machine, but i got a question. Can that machine skiming discbrake in hybrid vehicle ?

[@EBCBrakesUK]

Yes, as long as they're made from cast iron :)

[@yusuflbs7535]

@@EBCBrakesUK Is that any additional tools for that ? because what i know is hybrid system can cause fire if wheel is turn. Because wheel rotation will charge the hybrid battery.

[@nicholasmampuru1834]

What happens to the drive shafts when you skim the front rotor? Especially on a 4 wheel drive set up, do u need to disconnect the front shaft from the transfer case?

[@MePeterNicholls]

If only garages did this. Instead of “yeh new discs mate”

[@blue68yellow73]

Can this also be used on a drilled and slotted rotor?

[@EBCBrakesUK]

Hi, yes absolutely. For more information on the process please head to - www.procutusa.com/ - Have a great day.

[@bEEBO178]

Works on 2 piece discs as well. Mine are 2 piece and C hook drilled. Spot on now after having mine done due to brake judder

[@mpett1979]

Is this service available at you northampton headquarters? I’m local and have an e46 bmw M3 whose disc are worn and causing a hum when braking. Do you recommend new pads after the process?

[@EBCBrakesUK]

Hi, unfortunately we don't offer this service. We would recommend getting new pads after this process.

[@mpett1979]

@@EBCBrakesUK is there a company in Northampton who has this kit you can recommend?

[@MePeterNicholls]

It just needs a vacuum attachment

[@crozwayne]

what material is the cutting inserts?

[@EBCBrakesUK]

For more info, head over to the Pro-Cut website :)