Probably the BEST $70 STACK right now - SpeedyBee F405 V3, ESC and Flight controller FPV Drone Stack

[@NegativeSum]

The four level battery indicator actually does come in really handy. I can't tell you how many times I've got everything set up to go, only to pull my goggles down and realized I strapped a dead battery on the kwad. Being able to immediately see if it's charged or not takes a little frustration out of an already sometimes frustrating hobby. It's the little things my friend. 😊

[@uavtech]

4:18 - BF 4.3.x has a bug with blackbox logging on F4 boards. I made an issue report on it. My man Steve is looking at it.

[@RCwithAdam1]

Thanks for the info! 👍

[@Superguru123]

I bought the Speedybee F405 V3 stack with a BLEs 60A ESC. You desoldered the capacitor for space, but I think there are some frames that have room to place capacitors.

[@Carguyforlife]

I have bought a total of 3 of these FC+ESC stacks and 1 of the FC's by itself. I have no long term experience with it, but I can without a doubt say that it comes with Betaflight 4.3.2 installed, and if you upgrade to betaflight 4.4.2 and use a 32gb microsd card for blackbox logging you will have issues with your OSD. I just learned this today and will try to spread word. I still think it is great value for what it costs, it just either will need to be left on the stock firmware or have the SD card removed once it is PID tuned.

[@flat-earther]

Hi Carguy, how to use the S9 pad for PWM output on this FC?

[@romanagosto9]

Le puse el nano xf pero no sale señal de las barras en betafly

[@christopherconkright1317]

It says 4g it might just be to large and can't see it. or like they say format it with fat not ntsc which windows does automatically if not changed

[@animishaalagappa2327]

I had a question I plan on using individual esc's, where and how much should the input be on it??

[@mr.beems_0079]

Hello sir I have a question where should i connect ibus reciver to f405 v3 flight controll

[@gabrielnunes159]

Hello my friend! Thanks for your great video! One question: I have the F405 V3 and try to use blackbox with SDCard but no sucess. I tried to change the settings, use BF 4.4.X, 4.3.X, 4.2.X but nothing worked... I tried both SDHC 8GB and SDXC 64 GB... Format them to FAT32 with 4096, 8192, and all kb possible... I also did a partision with only 2GB on the cards but no sucess... Any ideia what may be happening, and how I can fix it and finally use the blackbox? Thank you so much in advance, BR.

[@RCWhitted]

I put this on 2 different builds. I'm a T motor guy and this is really nice you get a out for the money

[@Dj-md3qv]

I have been looking for the voltage output of the VBAT pin on this ESC and i cant seem to find it, their spec sheet does not say what the output voltage is at the pin if soldered, or the voltage input of the FC, do you know what it is please?

[@lungomaburfpv1425]

Sir, why my drone after build with SpeedyBee stuck at Take-off maiden is "freeaking yaw" and strick Throttle not function?

[@flat-earther]

How to use the S9 pad for PWM output on this flight controller?

[@christopherconkright1317]

Could depin and put thet connector on the longer wire

[@ercantozlu3779]

I can communicate with the remote, but I cannot put the control card in armed mode. Can you help with this.

[@chestergt7765]

I've been having the hardest time getting this board to work with betaflight. I can't get any of the ports to save. I can''T get it to arm and I can't get the calibration to work on the magnetometer

[@Noobentretenimento]

Resolveu?

[@chestergt7765]

@@Noobentretenimento yeah I figured it out. I'm not sure why though lol but I got it going a few hours after my post.

[@theanimecrown9930]

I always watch your videos how do enable ox channel in my transmitter

[@RCwithAdam1]

Hi! Thanks. I'm not sure. What transmitter do you have? And what are you flying with it?

[@markellis265]

Where do i connect the ibus receiver?anybody could help me out 😅

[@chrisrivington]

How do you setup and ise thr camera control pad?

[@brycediussam]

Next time try using smaller capacitor and set it beneath the xt60 plugs, set the stack higher.

[@megiMove]

I bought a speedybee with this app. It has the dji o3 and was suppose to work with the dji controller v2 and googles v2 but, I cant seem to bind or connect to neither the controller or the goggles. Ive been on it for hours! Im so sick of this shit. How hard can it be 2023 to connect something ? I've updated both controller and goggles . It's so frustrating.. the dji fpv sync tok me 30sec to set up :(

[@arnavgamergamer8721]

can you plz make a video on it or the website link which shows how to do it ?

[@bengordon7635]

The FC is good I have 1 with a T-Motor ESC flies like an F7 and has everything the original esc was heavy and blew on first crash so i had a T-motor light 45 amp esc laying around THE FC IS GREAT

[@theanimecrown9930]

I am your subscriber bro and your videos are totally amazing

[@RCwithAdam1]

Thank you so much 😀 Thanks for subbing!

[@christopherbuga3608]

Can this f405 stack be used in a build with a dji air 03 unit

[@deltadrone]

Nice vidéo! What is the FC firmware? SPEEDYBEEF405V3 or STM32F405 ?

[@bosqueblanco3744]

First stack I ever bought so wtf do I know but I kinda appreciate the sawtooth motor pads on the esc cause they are nearly impossible to bridge.

[@RCwithAdam1]

Congrats! Yes, that is a benefit to having them spaced so far apart!

[@vishnuchaudhary4425]

Can you please tell me the best FC with baro under 35$ available online.

[@vishnuchaudhary4425]

Also tell me, from which site i should buy except banggood cause it doesn't ship to India.

[@leomatis_]

Did you manage to tune it decently? Was thinking to get one for a 6”

[@sams9716]

I have the stack and like it. Only problem I have ran into is I can't get Bluejay firmware to work on this ESC

[@ser812g]

what problems have you had with bluejay?

[@marcingrotik8802]

can be used to control the bait boat?

[@plop386]

is it easy to flash ? =)

[@derrickmitchell39dm]

Can this be used on a hunter vtail 500 drone ?

[@RCwithAdam1]

Not sure, but I don't see any reason it couldn't.

[@derrickmitchell39dm]

@@RCwithAdam1 we gone find out today. Are ESC selection according to motor kv size?

[@RCwithAdam1]

@@derrickmitchell39dm No, not necessarily. Usually the important factor is how many amps the motor will draw with the attached prop, and then get an esc rated to handle that many amps.

[@pepper8048]

I purchased the speedy bee F7 V3 stack. I received it with bent pins. I always inspect the ports before using a product. I contacted Speedybee and they offered me a 20% discount on replacing their defective product. Be careful working with them. If you end up with a defect, they blame you instead of offering any customer service to rectify their failure. I'll personally never use another Speedybee product and I'll not repair any quad containing their products. Be careful with they so called "warranty" claims. They don't actually warranty their products.

[@Klaas_H]

Adam. Does it support the Walksnail Avatar HD? Similar setup as the DJI? Just bought this stack for my first build.

[@RCwithAdam1]

Hey! I don't have a good answer for that right now because I do not have the Avatar system. But I don't see any reason it would not support it.

[@COLEADAMS-ph4xc]

I am new to FPV and am working on my first build right now. I have a flysky i6 transmitter so I am looking to use i-bus. The diagram only shows s-bus so I do not know where to hook it up. Anybody have experience with this?

[@fpvaprendiendoamodificar6359]

You can connect it in any of the two (i-bus or s-bus) but it is better in sbus if you have GPS and it works in security mode.

[@christopherbuga3608]

Can I use this stack in a build with a caddx polar Vista kit? Like can this stack be used with digital builds?

[@RCwithAdam1]

It sure can. That's how I'm using it.

[@panha3421]

Can it connect with flysky

[@RCwithAdam1]

Yes. It will work with whichever type of receiver you connect to it.

[@daudprabowo465]

Have you tried INAV for this FC? Since mine having trouble on ESC protocol (available only multishot) and when armed the motor didnt want to spin

[@MrElasky123]

Same as mine, did you find a solution

[@daudprabowo465]

@@MrElasky123 Yes can, using BLHeli_S mulitshot version. But u need to calibrate the output first for multishot protocol

[@pfunk72]

What's your opinion on putting a 50 or 60 amp stack on a 5inch quad do u thinks that's over kill

[@RCwithAdam1]

I don't think there is any downside to using ESCs rated for higher amperage than needed, all other things being equal. Usually it's just more expensive to use higher amp ESCs.

[@rudistival4101]

Mi dispiace ma non riesco più a fidarmi di uno stack Speedybee. E tutto fantastico, tante funzioni interessanti, possibilità di configurare la FC tramite Wi-Fi , un prezzo davvero buono… purtroppo il mio drone con speedybee f405v3 ha sofferto di gravi problemi di desync finché un giorno dal nulla ha fatto un death roll senza apparente motivo e si è schiantato rovinosamente a terra rischiando di perderlo. Cercando in giro sembra che non sia il solo ad aver avuto problemi, qualcuno ha risolto modificando il firmware dell’esc, io invece preferisco spendere 20-30€ in più e prendere schede più sicure che buttare via build da 500-600€.

[@98-24]

Hey my Man, Can you bind a Flysky to a Rage micro airplane???

[@RCwithAdam1]

Not sure. Can you give me a link to the product page?

[@ParticipationTrofee]

So, who else spent the money to go digital, then immediately ordered a Rush Max? Digital is just so soupy. I guess I need to give it time.

[@samselvey7780]

Is this just for DJI or analogue too?

[@RCwithAdam1]

It will work for either.

[@arnavgamergamer8721]

bro can you plz tell me is osd is setup internally ?

[@RCwithAdam1]

The OSD is meant to be set up through the betaflight software (either on computer or mobile app).

[@arnavgamergamer8721]

can you plz make a video on it or the website link which shows how to do it ? @@RCwithAdam1

[@danyalibnekhalil]

I hope I shall get reply. How to connect telemetry with this flight controller to monitor battery voltage etc ? Or this flight controller don't need telemetry? Can you answer me about telemetry.

[@RCwithAdam1]

Are you using it in an airplane or fpv setup?

[@danyalibnekhalil]

@@RCwithAdam1 in fpv .

[@danyalibnekhalil]

Can you guide me about telemetry for this flight controller?

[@danyalibnekhalil]

@@RCwithAdam1 please answer

[@OdysseusVrakas]

Where does speedybee ship from?

[@RCwithAdam1]

China, I think.

[@ExplorewithZac]

Having the air unit that close to the stack is totally not normal. That frame is poorly designed, not the ESC.

[@CheeZyNutZ]

60a v4 js even better because it doesn't have OSD issues🤙🏼

[@maheertajwar2470]

Bro can you tell some details about why SD cards are used on a flight controller?

[@RCwithAdam1]

It's for storing the blackbox data, aka "blackbox logging". It's so that you can view the flight data later and see things like motor rpm, gyro data, noise, and other aspects. This is to help when tuning the quad and seeing the effects of any changes that are made to the PIDs or other settings.

[@theanimecrown9930]

Bro I have no money to complete my drone can you give me some help I have no parts bro can you provide me some parts

[@RCwithAdam1]

Hey. Probably not, but what drone are you building?

[@memeis1]

Its like 100$ in Bangladesh 😭😭

[@gregorydahl]

I fly mine out 15 miles and get pretty ok video . No just kidding

[@SniperUSMC]

But this is only an F4 processor, that's why it's cheap

[@tito9107]

Bought 2 cuz it's the cheapest stack. Stock up while you can boiz!

[@haroo294]

Good for the money until that ESC blows up on the 3rd flight and starts the battery on fire like this exact stack just did to me....

[@RCwithAdam1]

Bummer! It's still working ok for me.

[@haroo294]

@@RCwithAdam1 good to hear man! I may have got a bad one. Talking to speedy we now about it. Sent pics of everything and my motor prop setup. They're being very thorough. Hopefully I get a new stack. That would be sweet.

[@nickcarnevalino7462]

the number of times i cringed hearing you say "analog or dji" - as if dji is the only digital system out their ignoring the likes of walksnail or hdzero.

[@ChrisGWGreen]

Good video... just watch on mute