PROBLEM SOLVED! Fixing shift problems on a Coleman UT400

If you’re having a problem with your Coleman UT400 not shifting in reverse, this may help you fix it. The transmission is great, the shift link was the problem. Was not going into reverse.

[@JoseTrejo1]

This is a temporary fix. You should extend the shifter lever by 3/4”. This will change the throw needed to get the gear into each selection that is made. Also what I have found is on the newer units, the detent inside the engine is revised and causes the fork to bind in forward gear not allowing it to engage 100%. As compared to the older units the detent is too narrow of a span and the shift fork plate is too narrow of a window preventing full engagement.

[@NeoFunUniverse]

We all came for the fire breath round shotgun

[@jtmeyer2490]

Thanks for your comment anyway

[@Bobby-vz7ss]

M Mike Coleman side by side won't change gears

[@edrobin5569]

Won't go into Neutral to allow Buggy to start

[@jtmeyer2490]

Mine starts in gear as long as the brake is pressed.

[@westslopeoutdoors]

My is shifting great but it won’t keep the battery charged.

[@jtmeyer2490]

I believe there was a connection under the front hood I had to check when mine didn’t charge. I don’t have this machine any more.

[@westslopeoutdoors]

@@jtmeyer2490 I’ll have to check it out, thank you. Also, I bought mine from you back in January. It’s been a great little machine 🤙🏻

[@jtmeyer2490]

@@westslopeoutdoorsgood to hear. I hope you get the charging worked out!

[@nativeproud4160]

Any more problems with shifting to reverse

[@jtmeyer2490]

This fixed t problem

[@TyroneHilpert]

'Promo sm' ☹️