Procycle DR650 Complete Lowered Footpeg Kit

G'day guys, Pete and I install the Procycle DR650 Complete Lowered Footpeg Kit and WOW Pete loves them! Hope you enjoy :-) Cheers... Mark
⚙️ PRODUCT IN VIDEO
Procycle DR650 Complete Lowered Footpeg Kit
adventurebikea...
🌏 Biker Bits Website
www.bikerbits.c...
☠️ How to become a Biker Bits CREW Member:
bikerbits.com....

[@brianbenson2446]

I love your videos! I had a Screaming Demon sent to me in the States after seeing your experience with it. The guys there were great to work with, and now I have the pipe installed with the "open race" baffle. I have had several people stop me and say things like, "I've never heard a DR650 make a sound like that before." The sound is delicious! Thanks for your great tips!

[@darrylpaterick3108]

One of the first mods I did on my DR. That and 1 1/2" risers. I'm 6'2" and it's pretty decent now.

[@MOTODANS]

One of the best mods you can do on the Dr just got to watch hitting the side of big ruts

[@paulwood7798]

I am 6 ft 7 tall and have put lowered pegs on many bikes down the years but on my 20 Africa Twin my off road bike and my new 21 Tiger GT Pro, two bikes with lowered chasis pivot points I find lowered pegs uncomfortable. But this is the first time they have not really suited. When we used to race Motocross lowered pegs were an instant must do but Petes right they are in general game changers.

[@FULLPELTAdventures]

Thanks Paul, I'm loving the new pegs.

[@mrwill1969]

Brilliant Saturday arvo viewing lads . Good to see full pelt Pete to . 👍

[@FULLPELTAdventures]

Thanks Will, Shout out to you Mate.

[@utdesertghost199]

I live in the states and own a 99 DR350 which I have installed JNS endineering lowering mounts and IMS pegs. This in addition to 1" bar risers and rental CR high bend bars made a massive difference in the feel and comfort while riding the baby bush pig.

[@FULLPELTAdventures]

Good to hear your mods, Bar risers added to my list.

[@brucefleming1743]

Saturday video!! You beauty thanks guys 👍🇦🇺

[@FULLPELTAdventures]

Glad you enjoyed the video Bruce.

[@davidhanger5795]

When I got my used '99 DR650 one of the first mods I did was install JNS peg lowering mounts with IMS pegs. I'm about 5'8"ish.

[@leesuschrist]

Been watching your channel since I bought my nearly stock DR, nearly 7 years ago and mine now looks a lot like yours as far as the type of mods I've done. I plan on getting a more street oriented second bike in the near future, but I truly don't think I'll ever get rid of my ol' trusty DR.

[@PCPete68]

Good vid as always.I got different lowing mounts but left the shifter as was. Yeah it's a little higher but when I am wearing MX boots it gives me the room I need to change gears.

[@scottminshall6420]

Pretty cool mod, I have a set in the box waiting to go on my DR650.

[@paulbourgoin2436]

Great vid guys! I did the lowering last year and YES it makes a huge difference. For the shift lever, you almost need to keep it stock because one notch adjustment just makes it too low. And the bar risers is also a must to get the perfect ergo. Go the 2inch risers.

[@FULLPELTAdventures]

Thanks for the info Paul.

[@hiltonmcconnell2563]

Thanks for the video. I am 5'9" with a 33 inseam so the DR 650 is not good for me standing up for any amount of time, will be trying the lower pegs, and them go with higher bars, if needed.

[@MrAlmar07]

Cool combined Full Pelt Biker Garage vid!! Nice mod there guys. The old DR is ticking the boxes more & more for me.. Shout out to Boris!! Ha. 😉🏴󠁧󠁢󠁳󠁣󠁴󠁿👍 .

[@BikerBits]

Good Onya Al 👍

[@FULLPELTAdventures]

Thanks heaps Al. Boris is such a great bike, certainly ticking all my boxes. Shout out to you mate. 😁💀🐷

[@stephenrowlands6800]

This is one of the mods I need to do. Thanks for the info.

[@veetwotls]

+1 on the pivot pegs If procycle made them in a lowered pivot peg for ktm's i'd buy 9 sets replace all my pivot pegs only minus with it is making the shift lever & brake leaver more susceptible to getting snagged up as well getting toes hooked up ripping foot under the footpeg & braking your ankle

[@AfricaTwin-Stuff]

Ha! Yes Wendy yelled at me “there’s your hammer”. 🥰

[@FULLPELTAdventures]

As an ex fitter and turner we used soft faced hammers alot. Your hammer is first class.

[@AfricaTwin-Stuff]

@@FULLPELTAdventures wow. Thanks Pete. High praise indeed for this back yard tinkerer.

[@bradleyalexander5821]

That professional hammer is now famous…..👍🏼

[@Sum4Seb]

Great job guys! Check out Powermadd bar risers. I have the 2-1/2 inch but they also pivot so you have a lot more adjustment. Mine fit on my 2020 with the stock cables no modifications required. Good luck & *T4S* 👍🍻

[@BikerBits]

Great stuff Seb! 👍

[@FULLPELTAdventures]

I will check em out. Thanks for the info.

[@Sum4Seb]

@@FULLPELTAdventures powermadd.com/powerriser-475.html is the one I am using if you want a look.

[@FULLPELTAdventures]

@@Sum4Seb thanks mate.😀👍

[@bobdrakeford5731]

Gotta have good economics Pete! Mark I enjoyed "Adrian's Knockometer" in use! 👍 I have everything crossed re the Simpson Trip for you Guys! 🤞😁

[@FULLPELTAdventures]

Thanks Bob.😄👍

[@NzJohny]

Good stuff! Take a look at the renthal RC high bends. Happy with mine. They seem to be about 35 mm higher as you want. Also not using risers keeps the bars foward more as the risers push the bars back by following the forks direction if that makes any sense. Chers

[@BikerBits]

Yep sure does! :-)

[@FULLPELTAdventures]

Thanks heaps NzJohny, That's exactly what I may do. Are they fat bars, or normal, just thinking about the bark buster fitment.

[@NzJohny]

@@FULLPELTAdventures I just got the standard size. I should also mention they didnt over extend any of the cables at all. Perfect fit. Chers pete

[@FULLPELTAdventures]

@@NzJohny thanks NZJA. really appreciated.

[@1964mjc]

Wow!!! @0:26 - Hah - Pete with the MVDBR shirt on !!

[@MVDBR]

Can't put my finger on exactly why, but Pete's looking a million bucks in this video 😅 Nice work gents

[@BikerBits]

LOL 🤣 Yeah I can't figure it out either!

[@FULLPELTAdventures]

LOL, thanks Josh.🤑👍, I noticed your new T700 shirts, mate they are Sweet as. 🤘💀

[@MVDBR]

Haha yea I quickly ordered one before Yamaha makes me take em down 😁

[@veetwotls]

instead cutting up brake rod (butchering up the OEM) go bunning buy some all thread rod make one just cut to length you need grind one end same as OEM shaft , paint , jobs done as for washer grind flat spot on the side it slip on easy still do it's job

[@magnusconsul]

Hello Pete, great job, Bar Risers....I suggest ROX machined and I use them on my Tiger 900Gt.....safe travels...

[@FULLPELTAdventures]

Thanks heaps David, I will check em out.

[@PCPete68]

@@FULLPELTAdventures I got the Rox Pivot ones, allows for more of an adjustment

[@Peteslife]

That was a great idea using the spirit level to remember the position of the gear lever. Also it would have been pushed in after a few stacks, so should take it off and give it a few taps back out. Fitting the washer back on, that pin should have been pushed flat (similar to when you put the bold it), that way the washer would have been easy to get into position, no hammering required. (But yes its easy to sit back on the chair to critique others working, hahahaha) I thought the price was cheap compared to some parts us Harley people are doing to mod our bikes.. haha Keep up the videos so we can criticise everything you do.. :) Hows those welds going on the trailer.?

[@BikerBits]

Yeah still going great but it hasn't had much use lately so I can't honestly say they are fine with the abuse the trailer will normally goes through. 😃

[@IanHead-ig4bt]

Are they much wider than stock and whats the vibration like without the rubber mounts? Cheers guys!

[@greasycanadianbiker]

I've purchased this kit, haven't installed it yet. Not sure what u mean about cutting the height adjustment bolt coming from the master cylinder. Why is that necessary?

[@christophermcreynolds6001]

Good one

[@doniturner5077]

Get em pistol Pete, enjoy yourself sir.

[@FULLPELTAdventures]

Thanks doni, the new pegs are so good.

[@randyduncan1858]

About that shifter! I absolutely must get my shifter back to level. Same issue, original is too high and one spline is too low. What's the fix? Would rather not try to heat & bend, but I will if necessary. Thoughts anyone?

[@sarge6908]

Hey Pete, I believe that cotterpins are in pushbike pedal arms.🙈? Just sayin…..

[@FULLPELTAdventures]

Is cotterpin an American term for split pin?

[@sarge6908]

@@FULLPELTAdventures I believe your correct there Pete. American terminology. Australian has me bought up with the word cotter being the pin through the Pushy pedal crank arm. I know, who cares! Great viewing so keep on keeping on. 🇦🇺 Cheers mate

[@FULLPELTAdventures]

@@sarge6908 no worries, glad you enjoyed the video.

[@BikerBytes]

Great video guys 👍 Was there no way you could keep the rubber washers? I’d be interested to hear Pete whether there’s a noticeable change in vibration as I was considering these foot pegs. Cheers fellas 💪🇦🇺

[@FULLPELTAdventures]

Hi Jason, will let you know. I don't believe it will a problem.

[@davewalton2358]

I added washers on the bolts on my stock DR peg mounts to take the flex out of the rubber mounts and didn't notice any difference with vibration but the pegs feel much more solid and connected now. Also extended the stock pegs with some steel strap welded on to make the pegs longer and wider. Much nicer to stand on now!

[@FULLPELTAdventures]

@@davewalton2358 hi David, that sounds like a great mod. I'm sure it works well.

[@aarenmyatt4509]

It's all straight forward until you start stacking mods on top of mods. On my DR, I couldn't fit riding lights using any available mounting brackets after fitting a 25lt tank and DR-Z front guard. I soon had to revert back from the B&B tail tidy to the stock plastic tail in order to fit panniers that I picked up on marketplace. Also I laughed when I noticed this vid went up 2 months ago, thats about the time when everyone is Aus was sold out and Procycle US was telling me 2 months wait on the pegs. Please to say they're on their way now though. Enjoy you vids new subscriber here. 👍

[@greasycanadianbiker]

I have the exact same scratch on my gear shift side on the stator cover. It must be a DR thing.

[@seandiveney7942]

How did you adjust the brake light switch

[@IRONMAN-kb4su]

I need those , my feet fall off my DRZ/SM 400 all the freakin time , and with my motorcross boots on hard to shift and those stupid little rubbers they put in middle don't help when wet !

[@justgjt]

$15 bucks cheaper than Vince Strang's price.... Bonus !

[@CurtPottorff]

What side racks is he using that works with the B&B top rack?

[@FULLPELTAdventures]

Hi Curtis, Boris is wearing Barrett Racks.

[@leonbuild3246]

Splitpin

[@marcelcanuck]

What about lowering the brake pedal brothers

[@grahamgillette5393]

It’s a split pin for gods sake,

[@munter10]

...eh, aussies . . sheesh!

[@backwoodsman1753]

This short-arse begs to disagree! After comparing ergonomics with other trail-bikes, my opinion is that bum-on-seat road- cruising comfort would be improved by raising the pegs, not lowering them. As for off-road, take notice of the footpeg/ seating position on Toby Price's setups. And if you want rigidity in the pegs, you'd be better off spending your money on an SW Motech centre-stand.