Рет қаралды 29,645
How to Use the Trim Command in Fusion 360 // The trim command can be activated from the sketch dropdown list or from the right-click sketch menu. You’ll also be able to activate the trim command with the keyboard shortcut letter “T,” as in Tango, as the trim command is used quite often while working in the sketch environment.
The trim command lets you trim away sketch geometry to the nearest point of intersecting sketch geometry.
SUPPORT KEVIN'S MISSION
━━━━━━━━━━━━━
[Making CAD education accessible]
1. Kevin's Patreon: / productdesignonline
2. Buy Kevin a Coffee: www.buymeacoffee.com/pdo
3. Amazon storefront: bit.ly/amazonpdo
4. Subscribe to this channel: bit.ly/sub-right-now
TUTORIAL RESOURCES
━━━━━━━━━━━━━
1. Demo Files: bit.ly/sketchf360
2. Checklist for F360 beginners: bit.ly/f360checklist
TOP FUSION 360 PLAYLISTS
━━━━━━━━━━━━━
30 Days Series: bit.ly/learn-fusion360
Woodworkers: bit.ly/woodworker-playlist
3D Printing: bit.ly/3D-printing-playlist
Sculpting: bit.ly/sculpt-playlist
KEVIN’S FAV 3D PRINTERS
━━━━━━━━━━━━━
➞ Ultimaker: bit.ly/kevins-printer
➞ Prusa: bit.ly/prusa3dp
JOIN THE PDO COMMUNITY
━━━━━━━━━━━━━
Discord Group: bit.ly/PDO-Discord
Facebook Group: bit.ly/PDO-Fb
PDO Forum: bit.ly/PDO-Forum
FOLLOW KEVIN ELSEWHERE
━━━━━━━━━━━━━
Twitter: / prodesignonline
Facebook: / productdesignonline
Instagram: / productdesignonline
Want to send me something?
━━━━━━━━━━━━━
PO Box 1914
Woodinville, WA 98072
USA
TIMESTAMPS
━━━━━━━━━━━━━
0:00 - Trim Sketch Geometry in Fusion 360
0:29 - Using the trim tool
2:37 - Considering constraints
3:42 - Clicking and holding to trim multiple lines
4:27 - Trimming splines
5:03 - Quick trim full sketch demo
-
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
#Fusion360 #ProductDesignOnline