Professional Level How To Vinyl Wrap Corners Like A BOSS

[@istayhighi1540]

Well I wrapped my left g35 mirror cover.... took 3 hours 😂🤣. Imma do my right one tomorrow and use these tips . Going for 1.5 hrs 🤔🤔

[@OrestisTrips]

I think you made the best video on wrapping corners. Heat, stretch, reheat under, cut the excess. Will try it tomorrow. Thanks!

[@sawyermartin4434]

THIS IS THE VIDEO I HAVE BEEN WAITING FOREVER FOR. Seriously man, thank you for everything that you do in regards to helping people interested in getting into wrapping. You are the man!

[@joshellis5477]

Don't believe everything you see on T.V.

[@dwelzzone1984]

If u listen to this guy you will be laughed at

[@peej.w7598]

Lol, these guys comments didn't age well. CKs become extremely successful in the industry

[@shaunb813]

Im not even going to vinyl my car, how did I end up here and why am I enjoying it so much

[@swampysanta5445]

bet your car is wrapped now lol

[@michaelbravo2401]

Lol same here😁

[@elizabethmontijo3239]

Just watching is odly therapeutic. I do, however have a lot of corners and difficult areas to contend with...just not on a car...yet. I'm seriously considering it.

[@Shankower]

@@elizabethmontijo3239 Do it Elizabeth.

[@vent1c990]

Welcome in the beautifull world of wrapping

[@robertlopez6787]

I know this is a old video but thank you for showing how you wrap the corners. Iv been watching your videos for a while now and I wrapped my entire 00 Jeep Cherokee 4x4 in Vivvid Camo and now my 22 Can am Commander in Vivvid + Gloss slate grey. It has corners with 3 or 4 angles that was challenging so I searched your channel and found this awesome video! I just need to work on the excess wrap I know you leave about 1/4in and Im leaving about 1/2in or so. So on corners itll bunch up so I just need a little more work in those areas.

[@Flyboytr]

Chris, Just wanted to extend my appreciation to you for this video. I am tackling a partial wrap on my off-road Lexus GX470. I have not been happy with the corners. This video answered a lot of my questions about wrapping the corners. Your door-handle video was also a blessing for me (actually all your videos!). Please know how much help and guidance your videos provide. No swearing, monkey-shines or crazy thumping music...just great information. Thanks again! FlyboyTR Mobile, AL

[@SpecializedP2Ler]

Well I never anticipated this but watching your videos has me convinced I can wrap my WRX hood. This outta be fun 😂

[@Slayer-33]

This guy is the best teacher for vinyl wrapping by far!

[@sellyaconsole9316]

I’m taking up wrapping. I watched a few of ur vids and gained the confidence to wrap the chrome trim, spoiler, grill, and gas cap on my K5. I appreciate this so much. I really feel the spark of a new passion with this.

[@marcoperez306]

So did the passion last?

[@sellyaconsole9316]

@@marcoperez306 It did. The more I've learned the more difficult it's become. Especially when it comes to trying to read wrinkles, but I'm far from deterred. I've seen improvements through the past year, and I've gotten good feedback.

[@sellyaconsole9316]

Side note, totaled the Kia last year. Rip. Got an 08 G37 Coupe this year, motor seized up on me last month. Saving for a new one right now.

[@jimbosarmiento8845]

Your way to work is awesome!! Thanks a lot for share!

[@lt1_jio363]

Finally doing my first wrap. This really helped! I’ll have to go back and redo some stuff but thanks! Learning as I go.

[@15DurangoRT]

This guy is amazing! I wish I lived in Canada, he would have my business in a heartbeat!

[@CarModsGarage]

great video! I am wrapping my drift car and will give you a shout out. Thanks for all the videos they helped a lot.

[@normvanwinkle7670]

Just what i am needing, as i'm soon to do some wrapping on my Rogue front end. With lots of corners. Excellent teaching and demonstrating!!! Deeply appreciative!!! thanks again!

[@kathryndance8369]

Thank you so much. I'm wrapping my 10 year old yellowish cream kitchen cupboards with white now. So much more modern and I got the beveled edged corners perfect with the help of this tutorial

[@EternalBeast97]

Thank you for this! Wrapping corners has always been a problem for me.

[@xhazeyvii3118]

Gearing up to do my first wrap and I gotta say its intimidating, but your videos are so helpful and its really nice to know that the information is out there for reference. Keep it up CK, your killin it!

[@whos5.0]

I thank you for teaching me through your videos I hope to meet you one day and join your class in Canada 🙏🏼

[@ibrahimrammal6434]

Well explained and demonstrated, mate! Thanks a mill!

[@rafaelco4948]

i've been watching many of your wrapping videos for quite some time and this one is great. though im not a professional, i enjoy doing some small wrapping stuff on my car. Thanks for sharing your skills bro.

[@pgarcia128]

These recent videos on this beemer have helped so much!👏 The toughest corner for me is always the doors front bottom corner (cornering the fender/side skirt.) Such a tight spot to stretch over the corner of the door and fender corner.

[@brianlewke9692]

getting ready to wrap my golf cart, a lot of information , learned a lot

[@soundseeker63]

Best video on how to do tricky corner sections I have seen! Very useful just what I have been looking for.

[@kyleisthename]

Love all of your videos man. I really learn a lot from them. Might have to take a trip and come to one of your classes.

[@ripsrt6822]

Great vid! Very informative. I just purchased 3 different qualities and types of wrap to try out. Thanks!

[@charliebates318]

Thanks, am attempting to wrap my mobility scooter 🤣 and this has been a great help

[@GabrielPerez-zv6gm]

Hey CK I started wraping my truck thanks to you. And this is something I definitely have to improve. Keep up the good work 👏

[@burlgoat53]

Man you are killing it !!!! Thank you for all the knowledge

[@guitaristwagner]

This guy is a good instructor

[@elzeino2602]

I love that small details videos Thank you for the video..keep going 👌🏼

[@GItoKeG]

I really love that cutting tool. Which one is it? I don't like the other ones you usually see on Amazon and stuff because they're just flimsy. I've been thinking about messing around with cheap vinyl wrap on a hardtop. Who knows I might wind up being good if I play around with vinyl wrap enough. It looks fun.

[@tabttu]

Excellent tutorial! Keep up the good work!

[@AsianRedneck239]

This guy is an awesome instructor.

[@obiwan922]

4:57 Thought there's a bug on the hood

[@psy06]

cool tips. how do you do older cars with roof rails like toyota vans, nissan y61 patrol and so on ?

[@Elnombrequeqieronoca]

very professional to share your knoledge. much respect.

[@alexanderrogers425]

Your videos is very detail love watching em

[@remondogoedkoop8310]

Love your video’s man. Greetings from the Netherlands. Gonna wrap my motorcycle this year, you helped me a lot!

[@jdde013]

You've really come a long way with these videos. Fantastic.

[@leroijr407]

Nice. Thanks for teaching without charging a thousand bucks

[@flawlesstints]

Love this guy. Absolutely fantastic vinyl wrapper

[@Lilman3000]

ive always thought what the seams looked like. I wonder what vinyl is absolutely the most user friendly like bubbles or wrinkles the least and hard to burn.

[@Skyfter.Nimani]

Nice video. Very informative and well explained ✌👊👊

[@greganastacio423]

Excellent job is possible wrap interior? I have 2007 jaguar xk

[@jamie211983]

I always find myself watching this channel at 3am cheers christian :)

[@roahnosh]

Still relevant in 2023 thanks for the tips!

[@jasonolivarez8142]

I've been wrapping motorcycle and cars for more or less 6 years here in the Philippines.. all I can say is we are using different techniques bcos we are using different types of stickers... And I can say dat u have d best stickers.. how I wish to have materials like yours 😅😅😅

[@dongt8725]

Thank you so much for the video! Cannot thank you enough 🙏🏽

[@brutallindigo]

Awesome ...I worry about putting too much heat on the paint

[@Crunchy_taco69]

Wrapped my hood with 7d carbon vinyl on a legacy, looks good. Doin center console now with same wrap 👍

[@seemaab]

What temp are you using on the wrap?

[@jpmon1846]

Awesome video man, I cant wait to try this.

[@OmgLusty]

Nice !! 4 year old vid but still helping ppl out !

[@sebastianortiz3544]

Nice video! Very detailed 💪🏽

[@NowanCabal]

Can you heat and do corners like that with texturized vinyls? like carbon fiber? Thank you!

[@foxgrove60]

Great job thank you

[@jimb4547]

Always explained so well ! Thank you!

[@khaidang27]

What is the tool was used in the video to lift the hood, please? Any input would be appreciated!

[@TheBadtobeblown]

Best how to video I've seen!!!

[@rockyp3917]

Thank you for teaching us amateurs.

[@dustin2919]

I struggle with getting my corners and edges to stick unless I have a lot of extra on the back side

[@peterolley7159]

Just found this channel it's brilliant I love his tutorial skills absolutely perfect I messed up my interior trim due to heating after cutting so I'm going to start again ,,so thankyou !

[@siren_grnk]

Love this video! Great information.

[@deltajohnny]

Awesome video, incredibly well explained, and I have just subscribed! 👏👏👏👏

[@haggis4952]

I'm thinking of wrapping my car ..I am a professional wallpaperer so think gives me a advantage

[@leekouvlogzs]

very helpful video Thanks CKwraps! well done!

[@tylerlovesmacs]

fantastic video. Short and perfectly explains everything. Happy subscriber!

[@wibes-adventures]

Thanks!! So simple but so great!!! Thanks man! 👍🏼👍🏼👍🏼

[@jimrogers8105]

Verry good close up video and explain !

[@ulamss5]

how about "internal" corners? like some trunks have a triangular cut-out for the tail lights.

[@MrMikokirk]

wow thank you so much!! great video, hey how is that knife to work with it for wrapping?.. i just ordered two of those las week.

[@colinmgwilliam7087]

Very helpful video. Thanks 🙂

[@KaiserCipi]

What is the temperature of the air coming from your heat gun? Thanks!

[@chrisward6204]

What advice would you give a new coming in the wrap game

[@victormolina973]

Wich material did u used ?? I heard oracal don’t stretch to much !!

[@bebekosbebekos2194]

Hello, I would like to see how to wrap a very cornering shape with depth too, for example the whole exterior mirror of an Audi a3 8p inside out, is there a way of doing it at one peace?

[@ericolcott4086]

Great video. I've learned a lot with your help.

[@501stmedia]

Any tips for wrapping a hood with a scoop? Like a Neon SRT 4 hood?

[@KippoHound]

How do you wrap inside corners without chamfering the edge. I've been attempting this for intricate interior trim and have had no real success. If you have any tips or tricks on that I would greatly appreciate any advice!

[@diegorojas8748]

Hola soy Diego de Argentina cual es el material que usaste en la cupe ploteada de bordo .Es oracal

[@HantexD]

melhor canal para se aprender a fazer um envelopamento (wrap) cara você ensina muito bem aprendendo muito com seus videos pretendo iniciar na profissão em breve obrigado por compartilhar seus conhecimentos / i am from brazil

[@72Bluemax]

I was hoping to find out what is the name of the color of the Lamborghini that's in the beginning of the video. Also who makes it? Looks so awesome! Thank you for making these videos. Great info!

[@mdean73022]

I would like to see you do the headlight on a 1955 Chevy.

[@nopers2223322]

You sound like Rami Malek and I love it

[@danbenosa7096]

What are the best brands of vinyl?

[@jarradmcdonald2895]

Oh man thank you so much! My corners have been letting my wraps down so this is a huge help. Kind of silly how easy it is when you show it

[@Respect_The_Hustle226]

So I have a question I want to wrap 2 tone half and half but down the side of my vehicle is it possible?

[@craigb6446]

Bro i tried wrapping my side mirror around bends not even this tight and could not get it without lots of fingers and when I'd apply heat it would pretty much make the fingers permanent. Could it be the vinyl wrap? I used a cheap one off of ebay.

[@tj_snipez_2810]

yeeea u are the god of wrap in my eyes thanks 4 this video

[@steliocontos82]

What temp setting do u generally use, and do u drop it for doing corners like this?

[@leonardosalgado9165]

Eu gosto dos detalhes, que facilitam os acabamentos. E ele tem esse diferencial. Parabéns

[@tallldarkandhandsome216]

Hello, which brand of wrap did you use: vivid, Avery or 3M?

[@jeffsmithist]

Hints for wrapping tubes?

[@luddeluring]

Good video on how to wrap corners! However, how do you deal with corners/edges that are not as sharp/angled? Like the corner on the front fender to the left of the third corner you are doing in the video? Know what I am talking about?

[@CKWraps]

I can do a video with a corner that's more steep

[@jasondonavich2758]

I'm on a mission to wrap all my chrome on my car, one question is how the hell would you wrap a part of a car that is sunk in? Like if you had lights sunk into the car inside a cilinder part, that must be a super hard part to wrap.

[@WestwoodHeritageAndDesign]

Great work CK! I like your meticulous attention to detail. I'm thinking of wrapping part of my mk5 gti. Have you wrapped any calipers and rims? If so how did the calipers turn out? Any tips?

[@mytopfashion]

Thanks so much for this video bro!

[@fundamentallybroken4194]

Ok, what is the wrap in the lambo in the intro? I love that color!

[@foadrightnow5725]

Aren't you at least a little concerned that your excellent instructional videos might have a negative impact your own business? I mean, between the DIY'er who wants to wrap his own car, and those wanting to get into the wrap biz, your FREE videos give them all the tips, tricks, insights, and knowledge they could ever need or want to do it! Which, consequently, has the real possibility of reducing the amount of work you might get. Or, am I just over-thinking the idea too much? Regardless, your how-to wrap videos are THE most informative and helpful ones on all of KZbin! And I think it's awesome that you share your knowledge and insights so freely! And well, as well! lol! Peace!

[@CKWraps]

There is that potential but as of right now I'm not concerned about it. The goal is to build the industry which lacks decent installers. This is why I haven't hired anyone to work with me yet. I'm also booked solid for the next 3 and a half months

[@estebanbec]

i can ensure you that even looking this vids there are people that won't take the inniciative to do it by them selves...

[@estebanbec]

Excellent job

[@crazgra]

He has nothing to worry about. He makes it look easy. But its not that easy for everyone. I took right to it when I began but alot of people dont. Its weird. You needa touch and understanding of the pressure you can put to the material with everything: heat, stretching, where to relief cut things, etc... This guy has experience in places your don't understand till you get into it.

[@crazgra]

Thanks btw as well CK. You're dope.

[@asn5510]

Hi , can you tell me it’s my first time wrapping a car , I have managed to wrap 2 cars to practice on , 1 car is battered & bruised and the other has been previously re painted but the wrap job has turned out pretty good very smooth across panels , but I have noticed after around 1 week even know I have heated the edges and checked over twice during installation in some areas they have slightly lifted from around the edges in places not everywhere but in some spots it has became loose and lifting on edges , could this been because the cars have been painted before or could this be a cheap eBay wrap brand ? I’m really confused as I checked the edges over and over and made sure everything was stuck solid , I also cleaned very well before installation . Thanks for help with your videos really helped me out throughout learning :) subscribed!!