How To Do Inlays Like A Pro | How, Why, Where And When

Sign up to our mailing list on www.ckwrapstoronto.com to receive special offers and updates on new products
Certified Training visit www.vvividhq.com/get-certified
Don't forget to follow CK Wraps on Instagram ckwraps?...
Get 3m Knifeless Tape here amzn.to/2K7H69J
Get my recommended heat gun here on Amazon amzn.to/2seFpwi
Get my magnets here from Amazon amzn.to/2y4MSUM
Get my knife here from Amazon amzn.to/2LNufqm
Get my wrap gloves here amzn.to/2MqO07Y
Get Vvivid Shield Guard here amzn.to/2MmMOm4
Get Vvivid air release tool here amzn.to/2MgAseq
Get Monkey Strip felt buffers here 5 pack amzn.to/2JNXbkC
Get Monkey Strip felt buffers here 50 pack amzn.to/2JztSTJ

[@ValkyrieLightwing]

I like that this guy has his own business of wrapping vehicles, and yet still does guides and tip videos of how to do it yourself at home 🙏

[@BASSstarlet]

FFS dont you understand its a way to advertise?

[@ValkyrieLightwing]

@@BASSstarlet Wooow.. you don't say? He gives advice and guides of how to do it yourself, but if you want it done professionally and properly then go to him or someone like him. My point isn't invalid

[@straightpipedriceburner2036]

@@BASSstarlet wow bro. Ever just consider not being a miserable person?

[@reklampartnerproduktion2713]

This is almost the only youtuber actually showing that this stuff can be difficult. Every other only shows them making flat surfaces like hoods or doors.

[@iTitanZA]

The production quality has definitely improved a bunch. Pleasure to watch

[@Butterffinger5678]

Those front bumper inlays actually look really cool just as standalone accents.

[@Onedrank]

Always amazed with how much care you put in to every vehicle. Much Respect. 👍

[@jeffreyvarner6830]

Christian, watching your videos has inspired me to start doing wraps. I’ve done my first 2 cars, my C7 and my neighbors Camaro. My next 2 projects will be an AMG GLC43 in Vivid Satin Purple and and C7 Z06 in Miami Teal or Satin Green. Keep up the good work and I’ll share my pics if you want to see my early work.

[@daspenceradventure]

Vinyl wrapping genius! Been following for years and am intrigued and inspired each and every time🙏🏽

[@jinxtacy]

Wow. Fantastic bit of work here sir. I've never wrapped a car but was curious about it and your content almost makes me want to give it a shot on my unpainted front bumper. The girlfriend and her friends wrap cars, but was underwhelmed with the job they did on her car (they're opposed to inlays if possible). I don't care as much about lines from inlays and I don't think the '91 MR2 I picked up last night is practical to do otherwise. Thanks for the content. It's very educational and you're not trying to be some super hype KZbin kiddie. It's refreshing to see a professional. Time to go down the rabbit hole of your content. Haha

[@Pappasworld]

Starting my business this year man! You’ve been my motivation! Thank you for these videos! I’ve been watching you almost every day lol

[@SpendinThatCash]

Outstanding video Christian. Thank you so much. Keep up the amazing work!

[@lawrencebecker2431]

Gotta love the inlays. Great video. Very informational. CK wraps, killing the game.

[@theblackmanarmedwithacamera]

Bow to the MASTER of the wrap!

[@pistonyasuo4744]

Great dude, pro moves and great detailed explanations, if you wannna take your wrapping to next level this is our guy ! Thank you !

[@chrispryor3094]

Christian, I would like to thank you for helping me and my fledgling students learn wrapping techniques.

[@MrNoahac]

great video again, very interesting! Everytime i watch your videos, i learn a lot. :) And this front looks very hard to wrap, you really know what you are doing. Good job again!

[@Butterffinger5678]

Great explanation and in such an easy way to understand!

[@K4m1kaze]

always nice to hear a wise person speak :)

[@anoopko]

Awesome video Christian! Great tips

[@billpeyton5305]

Thanks pal, great explanations with the vidoes. Just starting out and has been super helpful

[@martine7777e7]

Great job man, very impressed..

[@mannyavila3629]

Awesome video!! Been watching a whole lot before I try my first small wrap on some trim. Getting excited to try it out! Also, really like the video crops-a 4k camera would be very nice for that. Shoot 4K and then you can punch in and it'll look very nice due to the extra resolution.

[@somarad]

Awesome info as always!

[@iffilunauhansen1278]

You're awesome.. huge fan and i really do appreciate the time and effort you invest into these videos.. 👍🙂

[@G_Ozare]

Superb work as always!

[@etdancer]

Awesome info bro. Thank you

[@gocardogo]

Great video man!!

[@hugohernandez1373]

Thanks bro always its a pleasure looking your videos i do professional window tint. I see some window Film there take care bro

[@TheXboxSux]

Christians work is always something I hope to achieve one day. Been a major help in wrapping my own car. I get compliments a lot. Tons of useful tips & tricks on his channel.

[@joshleslie1]

Would love to see were you put inlays on sport bike, great video as always!

[@ryanshivram9496]

I really like watching you do inlays I find it kinda satisfying lol can you make more videos of you doing inlays.

[@romsol02]

That front bumper looks tough to wrap. Great video Christian!

[@SiMpLefAilUrE]

Killer work!! Getting ready to do some interior wrap on my slingshot. Never wrapped before, has a ton of edges any advice?

[@brian8431]

I would love to see how you would go about wrapping smaller items. For example l-shaped brackets for spoilers and l-shaped deep recesses which as far as I can tell is impossible to do without making a cut.

[@TIPTOESMOOTH]

Love it, Stay hungry bro. The more successful you get the more haters there will be. Shine on !!!

[@jordanself7003]

I just found your channel while researching for a new project I need to do. I need to wrap a large work truck with the cab lights on the top and I was wondering if you had a secret technique for that or if you had a video with that in it.

[@lummy321]

Far too good CK buddy

[@whos5.0]

I wish soon you can do a mustang gt 2018 or newer so you can show how to do inlays on their front bumper only issue I have with my car 😩

[@ultimateuchiha741]

I’m having troubles finding a video explaining on how to place the tape after the inlays are made. Or on how to cut along the inlays that were made When you go to do the final “big piece of vinyl “ . Would you happen to have a video on that ?

[@classictrucker04]

Have you ever wrapped a motorcycle? Particularly a Harley Davidson? I have one that I'm interested in wrapping, and would like to know if you have any pointers on how to get it done.

[@iffilunauhansen1278]

Christian, could and would you please post the videos of the MX5 RF you did recently.. as I own one myself, and am preparing to wrap it myself, it would be a tremendous help to see how you did the whole car.. have a great day.. 🙂

[@RockieSteel]

Great car wrapper.

[@Issaac88word]

That wrist game is strong. NIce inlay you motivated me to rap my bike last year thank you for the instructional videos

[@craigcommadore4441]

So I have a 2014 white Mazda 3 hatchback, would you recommend doing to the door jams and the inside of the doors with a inlay first or after I wrap the outside of the door and body?

[@brian888.]

Do you have a video how to.wrap a auto gauge for its round portions?

[@mindermedia9136]

I’m looking to wrap my car in arctic camo, should I be buying pre made camo wrap or cutting shapes out of different color wrap and putting them on individually

[@tonyhernandez2628]

Do u have any interior ford fusion videos wrapping the trim?

[@michellestilkey3217]

Trying to wrap a zl1 from black to yellow w Flexishield and the bumper and rear quarter panels are kicking my ass ...I typically don't use dry apply so that alone has been an experience but I'm def feeling a bit defeated tonight

[@Ashkore21]

would you inlay anywhere in a FRS bumper? \\

[@desireealvarez151]

Is there any way to deal with excessive static on large panels?

[@aclvaz]

another nice video.but could you zoom in the job? vinyl or PPF wraps are mostly beautiful until seen close...

[@Hawc1987]

Hey Christian, i seen the boys over at Yiannimize one piece the Urus bumper in chrome. Just curious what you think about it and if wrapping on your own can limit what you can do with certain materials or cars, such as this one. Great work as always and thanks for the information you put out for everyone.

[@CKWraps]

I'm pretty sure they used an inlay in a very similar way, especially with Hexis chrome. If they didn't I'd like to see it up close. It's also different when the owner of the vehicle owns the shop. Limits can be pushed without worrying about a customers car having failures. I always push the limits on my own car because I know I can go back and fix it since I have it with me everyday

[@trcythmpsn]

Did you not watch the video? They did inlays on the front bumper.

[@Austin-mo1vy]

My schools graphic design class wants to wrap my 2012 f-150, right now it is oxford white, what do you suggest I get on it? And should I do patterns etc.? Also it has a few after market parts(raptor style grill and front bumper) that I would also like wrapped, literally any ideas would be awesome( I would fork out 250$ for a wrap)

[@Mghunnduns]

Do you have more videos on doing this particular car ? I was hoping to see the whole process 😄

[@CKWraps]

Yes, there are many more on my website, approximately 10 or so including the front bumper.

[@jasoncameron34]

Great job i bet its not easy to do wraps especially on half million dollar cars no wonder it cost so much to wrap a vehicle. Keep killing the wrap game brother

[@samuelmcmullan2014]

I think ur a pro at ur job mate and don’t let anyone tell u any different other people don’t want u to to do well cause u are good at what u do I have learned a lot from watching ur videos I am starting to wrap car Here in Ireland and hope to do well at it I have family in Toronto when am there I could meet u and get some more ideas

[@CKWraps]

Thanks man, you're definitely welcome to come by when you come to Toronto

[@samuelmcmullan2014]

Thanks man

[@avpgraphicswraps3894]

Is this on this car wrap bumpers and all on your web site ?

[@rockyp3917]

How did you do the forks on that bumper

[@slybot]

What vinyl brand do you use?

[@johnsweeney5070]

Would you recommend using primer over bondo/top coat? I’m gonna wrap my car but want to fix some dings first.

[@mlg6992]

Don't wrap over exposed bondo. Hit any repair with filler paint primer first, sand it smooth, let it fully dry, and you should be fine without the use of adhesion primer.

[@monsterbvlog2525]

love the way you wraps ...like to work with u...

[@adamdelay2874]

Dumb question, but inlays would be done after the front bumper, correct?

[@G_Ozare]

Chris, I wanted to ask you if you're partnered with Vvivid specifically. I noticed your ckwraps website is created by Vvivid and you have workshops for certifications set up with them as well which is awesome.

[@CKWraps]

I'm not partnered with them, but I do have a good relationship with them which we created over the years

[@Lndmk227]

I like that red-on-white look, actually. If that were my car and I saw it, I'd ask for something like that instead of the red full wrap.

[@maxmasify]

What do you think about Niko and Mark from Yiannimize wrapping the Urus' front bumper in one piece without inlays? Is that a risk for any liftings or pull back?

[@mlg6992]

Go back and watch it again. They did it the exact same way as he just did.

[@CKWraps]

Yea they would need to use an inlay there for chrome. But they are great installers and it does definitely help to have 2 people

[@richardcontreras3730]

im looking to wrap my g37 without spending too much on the vinyl. does anyone know where to buy good/ decent material for a good price? i dont want to go the super cheap route, i want it to look, feel, and be good material i just dont have too much money to work with. if anyone has info itd be greatly appreciated.

[@wattimena]

Christian, you should've shown the whole front side with the hood closed so that everyone got a chance to see the front side of the lambo, and that will make your job look even better! Otherwise it's a very good job!

[@CKWraps]

I'll do a walk around of the car once it's finished

[@johnbrevard5966]

I am a hard man to Please... You Christian, are really a man that gets my Attention!... Bravo on all your work!

[@johnwoods2035]

That looks super hott

[@ariana06tangi]

Oracal and hexis are the best in my opinion. 3m and Avery probably only good for roofs and bonnets

[@sparkyp6859]

Please put some pictures up of the finished Lambo I'm sure the whole thing will look spectacular oh, maybe just in your next video do a walk-around

[@CKWraps]

I'll definitely do a walk around on it

[@elijahmaurer9039]

Very good video, I recommend using more close ups when you want to drive a point home (like on the fiddly little end down there)

[@miladkhoury4494]

Hi, what kind of yellow tape is that.

[@CKWraps]

3m 301+

[@miladkhoury4494]

@@CKWraps thank you

[@asiancambo21]

Why didn’t you wrap the front bumper in one piece?

[@scottgillig908]

Ok, I hereby anoint Christian King ! An ad for Joe Bonamassa's new CD Redemption .

[@RaiderTV]

This only helps of u complete after doing the inlays

[@Hizenbird]

One question. Do you LOVE what you do? I'm looking to get into something else. I've been in IT for ages! But this fascinates me. So do you do it cause it makes you money and has just become another job or do you love doing this stuff?

[@CKWraps]

Doing wraps is my life. I love, live and breathe it. When you're passionate about something you'll find a way to make money doing it

[@Hizenbird]

For clarification, by "IT" I meant Information Technology (programmer/App developer)Thx for the reply.

[@brianrobillard494]

What a sweet ride! Must be nice to have stupid money , but sweet colour choice

[@Technique917]

Why the emblem?

[@CKWraps]

There is a very aggressive recess around the emblem

[@vinny2140]

Whait 5 min Guys: ok its been 10 min already

[@cizcalodiablopanzon]

AHHHG... you're going to scratch the paint with your watch!!!!

[@guillermojuarez4062]

"How to do inlays like a Bauss"

[@welchsbox]

i \ ctatat youq conduct walnutv \ laney ctat ctat ctat ctat

[@gmodesike]

Insecure man here.

[@stevevasquez1514]

I have a old school box Chevy all I see is you rapping new and expensive cars do you do old school cars are they just the same as a new sports car I would like to wrap mine but I see nobody raps old school why is that