shredder break down= late night struggle! Problem after problem!

[@leehawkins7337]

Tell you what Chris, Scotty is lucky to have someone as committed to the job as you. Fair play to the other lads who stuck at it with you. Definitely need a sponsor from Makita.

[@Howt-ooo]

One of the only few channels on KZbin that keep me watching it. Class as ever

[@PillSharks]

Proper graft. That old boy reminds me of my old work partner, a true grafter mate.

[@DorsetAdventure]

Nothing better then Sunday afternoon watching a good struggle vid much love from Dorset !!

[@roxanne9651]

That was one hard struggle Chris! You’re nothing but stubborn when it comes to getting the job done no matter the struggle. Love the video Chris struggler on. 👏👍🇨🇦💕.

[@alz0101]

Battery ratchet would be good for that, biggest one you can fit in ! Amazing work on the videos and the on going struggles 😅

[@jerrypruden887]

After watching this video I got rid of my Milwaukee power tools and bought all new Makita equipment. Thanks for the advice Chris! They should sponsor you in my opinion.😊🇨🇦

[@terryatkinson899]

Got a Makita myself, it ate my sockets so impact sockets had to be bought as well....

[@saxilbyjoe4325]

That job looks like the ultimate struggle!! The makers of those machines should sponsor you to give them feedback on what goes wrong and how to make maintaining them less of a struggle.

[@rescuecow90]

A job like that I find your better off coming back the day after,fresh headed you get more progress.

[@wayne3790]

Wow Chris, fair play to you buddy, you’re a true grafter!!! I truly admire you!! All the best to you & all the family mate!! 😊👍🙏

[@Jasonhughes258]

I feel exhausted just watching that. The struggle of all struggles, Always something to do at scotty’s yard.

[@phonotd]

An epic struggle there Chris, great to sèe the lads in the yard helping out. Its obvious the mutual respect you have for each other. I hope one of the power tool companies sees fit to sponsor you, or at least send you a load of new kit to ease your struggles.

[@philbean7521]

What a bloody struggle 💪💪don't know how you keep laughing and joking top bloke 👍👏👏👍

[@andychumley3680]

Now that is a proper struggle Chris! Hope Scotty is paying you well, good to the guys staying with you to make the job a bit easier, you are a legend mate😊👍

[@teeslunk]

Yeah u say about KZbin demonetising ya. Put a warning up at the start of the video. About the swearing. 😂😂❤❤

[@brookcampbell6838]

Recently found your channel mate, real life in a raw state, no clean workshop with tidy little 13mm bolts.. I think the youngers considering mechanics should watch your channel to see what "real life" is like.. You also show it isn't easy for anyone.. Fooking awesome.. 👍

[@JamesJohnson-ul9ox]

Was a Makita man myself Chris but slowly replacing my kit with Milwaukee, better tools by a mile and batteries far superior, they are the sponsors you need 👍👍

[@willo219]

Proper graft that was lad! fair play to you 3 for getting stuck in, hope your getting paid well for it!

[@craigvicary6598]

love these videos , cant wait for the next one already.

[@Professional-struggler]

Cheers Craig mate 🤠👍

[@md2320]

All I can say is you are honest and say it how it is 🤣😂🤣😂 companies won't give you stuff to review cos they don't want honest reviews they want reviews that give them big sales 👍 keep being honest 👍👍😂🤣😂

[@rodburford551]

Chris,you're a trooper to get that done.👍👍

[@robwhitfield6936]

That was a fookin long day Chris. I've been wetting myself watching this video 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@seanlynch382]

Chris your a dying Breed, there’s not many like you left great videos

[@MalteseMafia]

Great Video Christopher or should I call you Lord Of the Flies 🤣 as a Maintenance Engineer by trade, this struggle really hit home with me. You were all committed to getting this shredder up and running. I have worked in Waste, and we had a very similar one. You had a great team going there. Invest in some quality breaker bars.👍 They will help the struggle. Also go down the tip for some old sofa cushions for your comfort. Also Never put production / downtime in front of yours or others Safety. 👍

[@ManxAndy]

Afternoon Chris…..fun and games as always, and always up to your shoulders in crap……struggle on buddy 👍💪💪💪👌🇮🇲

[@jix177]

A tough day, well done.

[@kevinmccormack5192]

Great team work good lads and little leer dog put some hours in on that job 😂👍👍

[@Fircuehal]

Super struggle that one Chris, Top team to stick at it .,well done lads , hope Scotty,s getting the fosters in !!!

[@welderfabber]

Make some bloody playlists chris lad, I love a good struggle myself. But its a struggle remembering what videos I've watched (get some numbers on them)

[@keithhilton1564]

Awesome Job good to see guys come back. That machine is nothing but trouble.

[@markfoden765]

Fair play to the guys staying with you and helping,I realise you couldn't be left alone on site but still good they stayed as many wouldn't,wow just another struggle for you chris and I feel for you every video you do but you are awesome and funny,have a great day🤟💪👍

[@johnwelburn9966]

Hope Scott appreciates the struggle you went through Chris really impressed with your work ethic

[@jimmyquinn9639]

What a rotten job Chris you are a grafter and another good video ⭐️⭐️⭐️👍👍👍👍👏👏👏👏

[@tclifford123]

All credit to you Chris. Old school graft. You're a top man. But you could have stayed on and repaired the forklift. 😃

[@stuartreadman118]

Well done Chris, keep struggling on . That was hard to watch,felt so sorry for you and the team 😢

[@Scano41]

Keep them coming

[@johncollier7744]

Bloody hell Chris, they say where there's muck there's money. Hope you charged them double rate for that job. A proper struggle. Keep up the good work grafter !

[@tony-yp6qk]

Another top video has always chris and family 👍

[@Sash_Window]

What a guy!

[@JeanPage-p8s]

I hope your well paid, that shredder job was a tough one.

[@darrensarson1509]

Fair play to you what a struggle he's lucky to have a guy like you this bloke needs some sponsors but Milwaukee tools is the way forward best all round

[@mattjones7200]

Good bit of graft there lads ! Well done 👍

[@fullpowerlad]

Smashed it m8 🔥👍

[@mjk8710]

Outstanding Chris love ya! man I hope one day you don’t struggle and find equilibrium in your life as I haven’t 😂

[@philiphuyton28]

Tell you what Chris, Scotty is lucky to have someone as committed to the job as you grt work chris

[@richardlaw5737]

I reckon that machine is built in the same factory as they build coaches! They also never put the access holes where they need to be

[@scrandy2618]

Looks like frag waste horrible stuff gets stuck all over we had a bearing catch fire on a trommel because of the stuff keep up the good work big up the struggler

[@davidbotterill7549]

That was the never ending struggle! I feel for you chris. I can’t believe the machine isn’t built with maintenance in mind. When you said don’t get started on them holes I could feel the anger. Well done for not being beaten - struggle on mush. Dave Birmingham

[@philglover2973]

Good afternoon Chris hope you are all well awesome video thanks bud 🛠️🛠️🛠️🛠️🇺🇲🇺🇲🇺🇲🇬🇧🇬🇧🇬🇧

[@qsk19r]

I'd love to see your method statements & lockout tag out procedure 🤣🤣🤣🤣🤣

[@BOXTERS32]

Another great video Chris what a struggle!!, I have had a similar struggle with tight damaged bolts in confined spaces and had to resort to a torqe multiplyer to get them undone as there was no leverage due to no space to pull the breaker bar.The damage to your little finger is the same as mine on my right hand and the middle 2 fingers on my left hand i damaged tore the guiders in my hands pulling on cracker/breaker bars and big spanners over the years as a plant mechanic its a painful job.

[@peterharrison2630]

what a nightmare job Chris ! you really are a grafter. Nice to have some help on a job like that though, full credit to the lads staying till the bitter end with you. I have a similar issue with my fingers on my left hand. Apparently it is the Ulna nerve trapped in my elbow, just seeing how it goes for now. Keep up the good work with the channel 👍

[@nickstratton984]

you guys, wont find many like you three across the country, fair play well done guys👍👍

[@Whereyaworking]

Chris. Great effort. Have you ever tried an induction heater. May do the job. The art of the struggle. Top man 💪💪💪

[@johnhewit3099]

Great vid as always Chris.

[@user-rw2um8ro2p]

Great video Chris your a serious grafter and FairPlay to the lads giving you a hand

[@Paul71LS]

Chris you really are one in million.

[@djhscorp]

You are a star Chris.Dedicated or what.👍

[@JamesJames-bf5uy]

Loving the videos Chris from Dublin 👍🏻

[@125sm3]

Top struggle that shredder turned out to be . I do hope you charge well for a very long day on the tools .

[@jnthnmllry]

This is the proper definition of a struggle 😂

[@lazylad8544]

Fair bit of graft there chris👍👍. Take my hat of to you and the other lads. Hope Scott treated you all.

[@petertrevena804]

Gday Chris, another great struggling video. And you need a fee sponsors JCB ? Could be one😁😊😚

[@kevinnoone8828]

WAS THIS STRUGGLER’S EPIC STRUGGLE OF ALL TIME TOP MAN CHRIS 😮

[@stevencoyne4971]

Chris ,You Are The Man ,A Bloody Good Show Mate ,Make Sure You Put In A Good Invoice To Scotty ,Double Rate Mate ,Bet Robert,s New Glasses,Don’t Last Long 👍👍👍😂😂😂😂😂😂

[@almaxx9680]

Atleast lill dog caught up with some kip while you struggled on with the job🤣🤣🤣

[@wythymanc5059]

Tell ya wot Chris your one hard grafter m8 I’m 57 and would rings round half these younguns keep it up m8 love watchin ur vlogs and old rob who works there is a grafter proper old school

[@mickshillito2199]

Well done Chris what a shitezel job feel for you

[@rscosworth15]

Bit x rated at points chris 😂😂😂😂 awesome video keep struggling ❤

[@MyMike1946]

When you get to my age your hands will be f….ked just like mine. Bent fingers and arthritis. Look forward to giving up the tools only do odd jobs now at 77. Keep on the good work struggle 👍

[@andyfletcher154]

Chris your like ferret you get in anywhere mate lol

[@jimlondon1]

Crushers, screeners, shredders, balers. All a bastard's bastard sodding nightmare to work on. I didn't envy you on this video. Fair play though, you grafter. 👏👏

[@chriswild2458]

Good gang are you lads, impressed

[@ma.creations20]

The struggle is real Chris 👍

[@blastingweevil2968]

you tube just has no idea that this is how real workers talk to each other.. my grandfather who worked for Walkersteel for 40+ years in the garage used to swear and curse like anyone "AT WORK" but he was the kindest well spoken person ever when out and about in normal everyday life, all though he never swore or cursed around women or kids i was about 17 before i heard curse words from him lol.

[@MrMush78]

Ya do some work for that Scotty Chris mate i hope he pays well 👍😁 ya need a medal or at least a sponsorship from Makita ! Lol

[@chillijamjeff5651]

Thanks for the recommendation to watch Manifest. The wife loves it. From ‘Chilli Jam’ Jeff - you tuber( ex hgv fitter/ technician and lorry driver for over 40 hrs - now a school caretaker 😂)

[@lyndonwebber1389]

What a struggle that was butty 👍

[@ronnierobinson1502]

PISSING HELL.....hahahah keep up the good work

[@andybowyer3602]

That was gruelling to watch fcukin hell laa! Your better off struggling leave them jobs to the youngsters 😂❤

[@johngordonhouchen1312]

Didn't you do this a while a back Chris, keep up the struggle .south UK

[@anthonygrant317]

Any chance you could have torched the bolts from the outside, burning the threads out.?

[@tinkeringtaylor3053]

You do get easy jobs Chris 🤣🤣

[@jamesward5721]

I reckon I'd have left off the bottom segments just for the giggles - chances are any shyte that gets bound on the rim would get chucked out as it passed the segmentless bottom. Having the full set leaves the crap nowhere to go except round & round. Weld in a "scraper" at 45 degrees so it cleans the drum just as the drum passes the missing segments section. Design flaw that - the shyte getting in with nowhere to go.

[@johnclewis]

Hope Scotty fuckin looks after you Chris, your a diamond worker

[@dannyhogi4953]

Tell you what some hard graft that some dangerous stuff in Scott's yard

[@austinwalker4184]

That's what I would call a hard days night Chris

[@14sgdpg82]

arthritis my dad was mechanic for 40 years exactly the same small finger is locked up

[@brumarly]

Inch drive knuckle put on the socket will make the bolt head line up from that silly hole

[@adriantremlett41]

There will be a breakdown timing mark somewhere so all bolts are accessed, thats why it looks like they have stitched you up,

[@brumarly]

We just plasma cut the bolt heads off, get the right tip and it flush cuts the bold head off, you need water to keep the fire away. Or just tighten the bolts until they snap. Hope this helps struggler

[@markknox9902]

When rings I would not answer phone 😂😂😂

[@scotspie501douglas7]

rough as workers cant swear

[@jpwatergardens2290]

I ever see tass and Joe boy we says at Mill be gd to see u m8 we talk truck shit lol dun it for 17 year

[@fletcherburton2770]

We ended up going out the next day and replaced the pipe. It ended up leaking from the top of the pipe. Got a new one on now aye 😎 the generator is a 50L V16 1250kva beast hehe 😜

[@aidy1162]

What a filthy job not many people would get in there 😮

[@kalv123]

I hope your charging a decent hourly rate mate cause you dont half do some graft for these lot, keeping them out the shit and you clearly keep scottys lads well motivated too to keep them on site helping. Bloody brilliant lads top effort that thing looks like a c*nt to work on

[@krzysztofglowacki9801]

Well done Chris HOW MANY hours take you on that job??

[@raygreene73]

Surely heating them would have helped was it to risky to use a blowtorch or even a mini grinder ,your one hard worker chris fairplay

[@dianelong107]

Hi Chris lil dog will be posted tomorrow already for his new home 😅 Diane