Loading shovel MAJOR problem! CRANE GAME circuit board fault!

[@allistairc123]

Done so many Volvo links they done this all the time of The older models I'd check to see if it could be welded if not price making one out of plate. Nice wee job

[@Professional-struggler]

I’ve just finished looking at your video on that crusher plate 😅 mate that arm of Scott’s looks like a walk in the park compared to what you take on💪 EVERYONE CHECK OUT THIS CHANNEL it’s a must watch 👍👍

[@welderfabber]

If any1 can this man can!! @allistaic123 is a legend. Chris did ask us, I would of done it but no guarantee's because it looked like it was being pushed full speed into piles of waste to crack and finally break there.

[@onsomebits7486]

I mentioned this guy, he’s the man 🤟

[@martinmillar8447]

Still 100% better than 99% of TV. Stroll on Struggler 👍🏼👌👍🏼

[@jameswright2797]

That Australian welder sounds like he’s from Cornwall 😂

[@wayne3790]

What happened was….😂

[@benfletcher2707]

Bloody good show I say

[@colinbourne8345]

That cockney ozzy welder impression was spot on chris!

[@martenclark9728]

Aye that's snapped like , professionally struggled as always , nailed the crane fix though 👍 yeh he did . Little birdie looks more like dad everyday , she will need a matching hat soon , maybe a stick on ginger beard wouldnt go a miss when shes onsite working 🤣

[@stefancoughlin9802]

You make going to work easier for me knowing I’m not the only one 😂 strugglers life

[@dazjay5656]

Shit day. Then Chris pops up. And it's friyay tomorrow. ya it is. Thanks Chris 🎉🎉🎉

[@michaelcoffey8008]

Hi I wonder if that forklift engine has a crankcase breather filter on it and is it blocked pressurising the crankcase pushing oil out the seal it may be over full helping it go out the seal

[@almaxx9680]

You probably need to attend a dog behavior class with lil dog 😮 it might calm him down Chris 😮 He's outta control!!!!!😂😂

[@datsunruss]

Chris your Australian Welder was the best Worzel Gummidge impersonation I have ever heard 😅 - some good graft put in this week. ❤

[@NM-kz6tv]

Very smart today Chris did Mrs Struggler dress you this morning 👍

[@joepacheco4038]

Chris noticed your chisels could use some attention on mushroom ends. Had a friend loose partial sight from shrapnel coming off end of chisel. Stay safe enjoy your videos here stateside

[@MartinBall-v6y]

Great video Chris, You said birdie was trying to put on her high vis but I think she was hiding behind it laughing and didn't want you to see her when you said about pigeon pooing the cat arm lol😂😂😂 Aussie accent needs some work. See you on the next one Woop woop.

[@simonkish2841]

Chris I nearly died chocking on my chicken tikka when you got that shock that was ridiculously fun never change man

[@colinoveral5366]

Chris it’s easier to take engine and gearbox out together and split on the forklift, I work on them all the time I work for g c hurrells

[@jnthnmllry]

That bit of welding cracked me up, especially you getting a belt off it 😂😂

[@kjbyrne11]

I’ve done a few of those oil seals on forklifts, easier removing the engine and radiator. Keep up the great work Chris 🇮🇪👍

[@davidpower6993]

Brilliant Chris No problem to you love the way you just get on with it best wishes from Ireland 🇮🇪

[@bigfoz8533]

Thought you said Australian, sounds like a Welsh Cockney Dorsetonian😂👍

[@martincunnington2154]

Loving the videos chris especially the aussie welder gday 😂 Scottys yard keeps you busy that cat must of gone with a bang 👍

[@samc7077]

Just want to say thank you for you videos and long may they continue. They are a fantastic view of the everyday struggle in a world of struggles. Thank you Chris

[@crazyedits50]

Did well with the raffle £524 raised winning a signed pic of the strugglebus was fantastic hope this helps to pay for more show content 😊 hope you and your family are well great video as always . Struggle on.

[@DaveJMcGarry]

Bloody hell i didn't even realise they still made Farleys Rusks!

[@lazylad8544]

Glad you got this one out finally 👍👍. Good job with the forklift struggle

[@chrismoore4232]

Just get some of that class A stick welding on to that arm 😂 be a grand job 😁

[@scottborton7774]

I will give it 2 you mucca your are one cleaver man fair play keep them coming

[@carllamb6711]

FFS Chris you make me laugh your face when you electrocuted yourself welding-funny as fook

[@andybowyer3602]

When you got that shock I nearly pissed me pants!! Fcukin hell you've had me in bits Chris, don't ever stop this struggle your made for it m8! WOOP WOOP😊😂

[@liamdtraxxas2011]

If you get some soldering flux it makes soldering so easy, dip the bit of wire into the flux you dont need loads and get so solder on the soldering iron touch the bit of wire with the soldering iron and the flux will suck the solder into the wire, then put a bit of flux on the soldered wire and the bit your going to solder the wire onto and it will make a nice clean connection, try and wipe the flux off after soldering it cleans best with electrical contact cleaner and old tooth brush other wise it gose bad in a couple of months if not cleaned abit

[@Georgiee.and.Dan.]

9 hours late, can’t beat a good old struggle, bloody good show 👍👍👍👍

[@roxanne9651]

Great video Chris and Lil’l dog I see is vicious as always 🤣🤣. It’s strange how you mentioned epilepsy when welding on your video! I just lost my 13yr old nephew to a grand mal epilepsy seizure last week 😭! Thank you for warning people to look away while you were going to be wielding 💕🇨🇦

[@cf3031]

Shame about your nephew

[@jerrypruden887]

Sorry for your loss🇨🇦

[@lewisbanks2311]

Big Chris nearly at 30k subs keep going mate

[@marinastuable]

it's called a dry joint, used to get loads on old tv's etc

[@wayne3790]

Bloody brilliant video as always Chris!! Thank you very much mate 👌 Bloody hell, I’ve never seen one snap like that before!!! 🙈 50 ton pressure with acetylene!!!! 🙈 All the best to you & all the family mate 🙏 You’re an absolute legend!!! 👌 Wooooo wooooo

[@stacyscholes6760]

No respect for equipment, when they not paying for it 😂😂😂

[@andychumley3680]

What a great video that was Chris, the welding is getting better mate, good day to ye, whooo whooo, bloody good show 👍 😀

[@almaxx9680]

Drill some holes Chris 😮 and cable tie it together 😂😂

[@MrZimmaframe]

Hey Chris I would go through all of Scotty's machine and check their Anti-Freeze, because all I ever see is people putting straight water into stuff, and it a few week things will start to get a lot colder, and you don't want cracked blocks or burst pipes... Leah dog will sort it 😄.

[@boz346]

Even I get depressed when you mention scotties yard and I’m not even going there. Ha ha. 😂

[@snoozy845]

Just what’s called a ‘dry joint’ on the crane game board , quite common in electronics

[@barney2633]

Yet another gem. All the best to your Aussie mate, he could almost be your brother !

[@DeadLineDwarfs]

Delivered to that lutterworth site before all the concrete and everything man it looks diffrent now before was a bog of limestone

[@chox2001]

That welding is getting better Chris . I hope you aren’t working leerdog too hard.

[@user-rw2um8ro2p]

Great video Chris a bloody good laugh 😂

[@jimmyquinn9639]

Brilliant video Chris 🚚🚜🚛⭐️⭐️⭐️⭐️👍👍👍👏👏👏👏👏👏😎

[@Damientrades]

Bet would be great fun to come to work with you for the day 😂😂 bloody good show Christopher 👍 👏 👌 🎉🎉🎉

[@davesworklifevlogs]

Another good video funny you Chris lad hahahah that dog he only moves to stretch 😂😂😂

[@jerrypruden887]

Great watch! Thanks Chris!🇨🇦

[@johnmcguane8218]

Shocking good show Chris ❤

[@richardlaw5737]

Good grief, Scottys crew are bloody rough on their equipment ain’t they 😢

[@mattjones7200]

Well in my mate ! Speak soon 👍

[@tony-yp6qk]

Another great video has always chris and family 👍

[@mbryn1982]

Tooted you on the A46 today Wednesday, was going to stop but was in a rush

[@Chris-jy3dm]

😂😂😂😂😂I’ve had a few shocks off my pigeon welder over the years Chris 👍👍whoo whoo

[@mickshillito2199]

The scotty vortex 😂😂

[@stirlingmotors]

Brilliant as usual Chris 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@jix177]

Great looking soldering job there. Actually it would be worth throwing a little tub of rosin flux in the toolbox for jobs like that. Makes the solder immediately bind to the pins and tracks. Scottys yard is like a maintenance vacuum, apart from the bits you do. I reckon as soon as a machine goes through the gates, every bit of grease and oil magically turns into muck and rust, the fuel tank fills with crap and the machine ages by 5 years! 😄

[@hugobosswood9002]

Struggle on my friend 👌🏽

[@graemewhite5029]

Scotty needs to start charging them lads for breakdowns ! We've a young lad working for us, keeps breaking stuff, pulled the track off the digger this morning, he said it looked loose, but decided to carry on anyway, told him he's not getting paid for the three hours we were there replacing it cos if he'd spent 2 minutes pumping grease into it, it wouldn't have come off, but he's adamant it's never his fault ! His mum does everything for him, so he's never had to take responsibility for anything !

[@hazeydays1ftw60]

The pigeon poo struggling welder that should be your second channel 😂😂awesome job Chris

[@allangooge7871]

Chris. When welding as you was. Don’t be kneeling on damp or wet ground!😂🤣Or damp gloves as I often find. 🤦🏼‍♂️😂🤣👍🏻

[@peterdyer477]

birdie reaction to the loading shovel broken priceless woo woo birdie.

[@paulclarke7461]

Australian welder pmsl brilliant keep up the Struggle Chris give us a shout out Paul from Nantwich Cheshire

[@thomaselvidge6819]

New to the channel,loveeeeeee your content cheers me up for the day watching you Chris 👍👍👍

[@lesliecarter2460]

I love your vids Chris they make my day keep on keeping on mate maintain the struggle yer ya will whoo whoo !😅

[@OuradventuresGU]

Warwick Wards, they will be able to help you Chris, and if they can’t am sure they will know who can, probably an opportunity for Micky Blasting to blast it ahead of it being welded if that is possible to do….. beyond my knowledge but looking forward to seeing you address this struggle!! 👍

[@thelightofficial666]

I bet Welderfabber was glad you didn't have the merch on in case people associate him with pigeons 🤣🤣🤣

[@PAYNEKILLER..]

I knew a guy plowing snow on a gravel pit road with a 938 CAT loader, he had the bucket angle to steep hot a frozen wheel rut, that same dog bone snapped and the ram came back through the windshield. Lucky he wasn't killed.

[@EamonnBlemmings]

Good show chriss 😊

[@peterdyer477]

your a right charactor chris loving life you wanna find that song by men at work i come from aland downunder jolly good show keep the videos coming 30k nearly yippey lovely little bridie too.

[@PP-kf1jx]

Absolutely brilliant chris keep working on the Australian accent though LOL Keep em coming PP

[@MrNomad1962]

Chris .There is a place at Hoyland at Barnsley have secondhand parts.Warwick Ward (machinery) Ltd .Blacker Hill Sidings, Blacker Hill, Barnsley S74 0RE

[@joshuawoodford9911]

I work on forklifts, leave the transmission in, block it up and remove the engine, a lot easier. Seat and hood off, rad out, split em and lift the engine out.

[@MartinBall-v6y]

Was leedog a cat in a previous life he's just like my cat sleeps all the time and only moves for food, toilet or to stretch.lol.😂😂😂

[@markmawson1]

It's horrible getting shocks off them stick welders, a few years ago when i was working for a blacksmith we got the contract with the local council for repair of gully covers they would go out cleaning the storm drains and if any were snapped or cracked they would write them down on a list and give us the list once a month anyway we got to this drain cover and between the path and the kerb was a strip of grass so i got all the all set to weld it i was sat on the damp grass cleaning the crack out ready to weld the lad fired the welder generator up he handed me the handle and a welding rod and as i was inserting the rod into the handle he shot the earth onto the grass right next to me well the shock that went through me was out of this world I've had shocks off 240v 13A but that was nowt compared to this when i finally let go of the welding rod i was shaking for ages afterwards, i had the dial at about 350A with it being a ductile cover and very thick and couldn't preheat the cover and couldn't remove it so had to whack the amps up and was using cast rods.

[@AshCrompton]

Wooo the hi viz!!!! Struggle on boys!! ❤

[@jerrypruden887]

Hi Chris, just want to warn you, animal lovers may not appreciate how hard you work that poor little pup.😅 We know it’s acting but those not familiar may not know you use a stunt dog for the stretch!

[@thomascoyne157]

Very nice video 👍👍👍👍

[@cliff1551]

Just as a bit of interest Chris did the arm have the locking system to stop it dropping on you

[@supermansbigsister3012]

Chris that was an amazing Welsh accent you were doing.. Keep practising and you might be able to do an Aussie one

[@didleyhay253]

Yes Chris u do love a struggle the Crain game is getting better for u keep on struggling woop woop

[@Bob23610]

Mate, I would ask a place called kocurek. They make and modify excavators, so thay definitely have the equipment to fix or make a new one

[@terryatkinson899]

Rusks aren't as nice as they used to be... less sugar i believe 😮

[@mondodaftasabrush]

Good advert for testing tough machines in Scotties yard if they can't break it no one can

[@125sm3]

I dread to think how much that repair to the loading shovel cost Scotty . Some repairs are even to big for the struggler to undertake 😊.

[@johnmoloney5296]

That exposed copper is probably going to corrode, tell them to coat it again, varnish might work

[@ManxAndy]

Clear nail Polish….👍😉

[@kandproofingandmaintenance]

Definitely one for baz

[@johnmoloney5296]

Just solder a piece of wire between the two joints Chris, the wire would create a new track on the circuit board for you

[@nushooz6731]

I'm gutted I was looking forward to Lil 🐕 ground stretch.

[@ricardosequiera1787]

Hi Chris, bloody good show mate nice to see you back on the struggles sword fighting solderer and what have you! Top geyser 💪

[@trevorrhodes6167]

She's growing up Chris!

[@stephenbirds5169]

Great show Chris as per normal. Need a favour mate. Whats them Iveco vans like ?compared to Sprinter/Crafter etc ??; i need to buy s/h one around £10K ish early next year for delivering PO parcels etc. Is it just luck of the draw ? Milelage/owners etc? Cash buyer, need summat reliable / medium wheel base. Would you reccomend twin wheel or single ? Cheers pal

[@andrewpeters3424]

Where did Ledags name come from Chris?.

[@gregshearer423]

1:37 you know it’s fucked when he’s looking at it like this 😂

[@DaveM_thetrucker]

13:33 don’t mess about putting new warehouse nowadays

[@ianwhite9045]

Try Cutting Edge Engineering who repair broken castings like this all the.Unfortunately they are in Australia 🤦‍♂️

[@abuubaydullah1]

Well Chris think the lads at scottys are trying to keep you work but this time they went to far with the arm 😂😆🤣anyways Chris Whoop!!! Whoop!!!! soon be friday mate .

[@everydaysabonus]

Hi Chris Worth waiting for 👍 Never seen so many adverts, think they were passing your vid around the KZbin studio looking for a sneaky cig somewhere or a swear word, but they were struggling on this occasion 😂😂 carry on at this rate you’ll be a millionaire by Christmas 🎅🏻

[@hugobosswood9002]

Rob goes through glasses like Scott goes through machine parts

[@spudhauler]

Instead of Cat spending tens of thousands stress testing new components of their new designs over many months, they just need to see if it does a week at scotty's. If yes it could go straight into production.👍