Professionally Seal Coating A Parking Lot 2021

[@ljprep6250]

Yeah, it looks like Ty's team has done this more than once. ;) Nicely done, sir. Crisp edges show the professionalism.

[@Motolife84]

We use a seal coat buggy we cut the sides by hand then use the buggy workout the middle for first coat then spray second coat looks amazing when finished I mainly crack fill with a tow behind crack fill machine

[@daveklein2826]

Who cares

[@gilbertojimenez2401]

Which product did you use for the parking lot and where did you buy it ? , the black watery stuff . I’m looking to do a weekend job on small 10 car parking lot

[@macsloan58]

Outstanding. Thanks for using the squeegee. Spray does not hold a candle to your application. Yours will last far longer than spray. I have done both processes. I usually don’t use the term “sucks” but spraying seal coating “SUCKS.”

[@TyKubinski]

Thank you!

[@250rRida]

Incorrect

[@250rRida]

I guess the main suppliers, brewer coat and seal master are just plain idiots because they actually recommend spraying sealer FYI. Also I have worked for both major supplier as well as own and run a large sealing business. People who don’t spray are usually small business who can’t afford the spray equipment and what goes along. Talk to any major companies. I guess we will hand brush our next 1,000,000 square yard project 😹😹 brushing is for residential driveways bud. Thank you have a good day! BAM!

[@macsloan58]

@@250rRida No. correct. That’s all.

[@macsloan58]

@@250rRida Ok, BUD! You are far too invested in somebody’s opinion regarding seal coating. Have a good weekend.....BUD!

[@bailey4900]

Nice job crazy for doing it by hand

[@mikemoustakas1]

Hey curious what brush and handle are you using? I like that it pushes and pulls. Ours only do one or the other and we use the same method. Your work looks great!

[@dgdvrn]

Hi buddy thanks for the video and good work. Most of the people doesn't know when you sealcoating temperature is super high and it's not n easy job. Just a question what kind of handle is that I see you using your brush pull and push it makes the life lot easier.If you can let me know I realy appreciate it. Thank you.

[@racecar157]

this is a "in genreal" question. when someone decides to repave a parking lot, is it better to tear up the existing asphalt/concrete or just pave over it? is there (I'm sure there are) differences & if so what.

[@TyKubinski]

It’s better to tear it up and start over that way you can make sure the base is good. But it’s cheaper to do a overlay. But I dont recommend overlays because it will just mirror the problems of the old asphalt onto the new asphalt.

[@benebutterbean2737]

The grass came out really good.

[@TyKubinski]

Thanks

[@kimberlyhansen6378]

Fantastic video, but I'd love it even more if it wasn't at such a high speed. I lowered the playback speed quite a bit, but then it got distorted. 😔 Looking forward to more!

[@blktop]

Nice work! We do seal coating as well, cheers from socal

[@jeremyarcher1202]

Fucking eh right! Finally, a seal coat video where guys are pulling the edges like normal people. It was fun to watch you guys go back and forth and finish pulling sealer old school style like I used to do with a squeegee back in the day. I try to get the young guys on my crew to do that because it’s so much quicker but they’re too impatient and get frustrated easily and then I have chew ass and send them back to a rookie edge so they don’t jam me up. We’re using brooms now obviously. I have to tell you it was fun watching you guys haul ass! That’s the way my right hand man and I roll too!🤘🏼Having said that I would have sprayed it after running edges. Too busy to pull those by hand.

[@TyKubinski]

Thanks! Yeah we did a second coat spray and the customer wanted us to brush first then spray!

[@sabo263]

awsome drone footage!

[@pitaluadh3918]

I have a question, I started at work and sometimes I have to do a sealer but I almost always get a rash on my body, which they recommend I use for itching. Thank you

[@cuddlybear4524]

Hmm, does it come in any other colors?

[@zieramae]

That’d be dope

[@daveklein2826]

Pink just for you princess

[@cuddlybear4524]

@@daveklein2826 Well I was hoping for lavender but whatever.

[@jimbernard71]

What a beautiful job- Hope you didn't give your services away!!! 👍👍💯🇺🇲🇺🇲🇺🇲

[@TyKubinski]

Thank you!

[@albertledesma5173]

What would make you think he “gives his services away” or make you feel like that was a necessary comment. I mean, that’s really such a dumb thing to say. By the look of all the equipment and trucks, don’t you think that’s a good indication that he runs/operates a successful business? That alone would be a GREAT indicator he doesn’t work for free. Good Lord man!

[@thegrinch8161]

I’ve got a question for you, when using the brush head was that to make sure the small cracks got filled without having to repeatedly having to go over it again

[@TyKubinski]

It definitely helps to get into the pores and into the small cracks and then we did a second coat spray to get the best coverage and to take away the brush lines

[@rafars2246]

As a home project you could use the brush for the first coat and the squeegee for the second coat to achieve similar results.

[@GutterRepairCanada]

Why brush over spray? When do you choose?

[@cardo1111]

Spray does not seem to protect as well as a brushed/squeegee applied sealcoating. It's likely too light more for aesthetics than protection. I once had my driveway spray coated was not happy with the results.

[@heyrod59]

The striping paint that is used on parking lots today is water based, and doesn't last as long as the petroleum based paint used decades ago, same for roadway stripes eventhough a reflective powder is used that too wears away with the weather. Nice job on the reseal though.......

[@jeremyarcher1202]

My company uses acetone based highway grade paint that sprays on clean and drives in about 45 seconds. Good luck getting that shit off.

[@jeremyarcher1202]

It dries in 45 seconds. Why would anyone use water based paint on a surface that has binders and tac, gets hot, and is driven on. That’s retarded.

[@chosen1one930]

Ive seen some where they use asphalt with a type of hardare like use in the beginning for the cracks

[@TyKubinski]

Chip seal?

[@chosen1one930]

@@TyKubinski unsure of the name, They fille the cracks first than seal it, ill see if I can find the video again

[@acdg7431]

Wow thanks for the lesson!!!!

[@MrGregFrancis]

Great work

[@TyKubinski]

Thank you!

[@leftlanetrain0289]

Is that a brush?

[@TyKubinski]

Yes

[@formulaasphalt2943]

Nice job.

[@TyKubinski]

Thank you!

[@codyjamessingleton5098]

Looks like a total piece of cake.

[@lilswank2012]

🤣🤣🤣🤣🤣🤣

[@ajjones4703]

It gets hot and doing big parking lots is a bitch some days even just using the wand. Dragging that hose is annoying after a bit if you don't have someone to hold it.

[@chuckdruckenmiller6935]

The lot in front of me is being done right now how did it know that this video matches what I'm watching y strange

[@cyberwick9855]

Satisfying to watch

[@TyKubinski]

Thank you!

[@newportbeach3621]

How long would this last on a concrete driveway?

[@TyKubinski]

It lasts a bit but when it starts coming off it looks pretty bad

[@newportbeach3621]

@@TyKubinski ok thanks for the reply

[@daveklein2826]

😂😂😂😂😂😂😂

[@Thunder_Sniper]

The result is beautiful 😮🤩 it is not in France that you will see that lol

[@William_customz]

True

[@thegadgetzone]

Why didn’t they fix the cracks ?

[@TyKubinski]

Which cracks are you referring too?

[@MrVadims14]

Why not cut in and spray? I love brushed big lots but man spray is so much faster.

[@TyKubinski]

We do that but on this one the customer requested it to be brushed!

[@meyou3874]

@@TyKubinski you ever consider buying a seal coat buggy ? If you do Rayner Equipment is the only way to go

[@realone9372]

I want to learn the trade

[@TyKubinski]

Do it!

[@ampvaile6150]

Put a 80/70 tip on and spray that shit broski

[@TyKubinski]

We normally spray parking lots but the customer wanted it brushed

[@michael6711]

Ich finde das super aus den USA🇺🇸👍 wer was für Deutschland 🇩🇪👍

[@kalebmcglone338]

Spray is where its at

[@daveklein2826]

No it's not

[@ivyanacaraballo4375]

Como se llama es producto

[@poloarts4240]

Chapopote o sealer en Ingles

[@wd1684]

I am OCD. The footprints he leaves are annoying me

[@TyKubinski]

We brush over all foot prints and we sprayed a second coat on this to take away the lines and any possible foot prints

[@daveklein2826]

Who cares about your ocd

[@jairomunoz1573]

Why would u do it by hand you should of spray would of been faster and nicer.

[@TyKubinski]

The customer pay for it to be brushed and a second coat spray

[@mientranvanmien2795]

2021 2022

[@classifiedfive4377]

When using that wand did you take the spray tip off of it to make it gush sealer ?

[@kamonmeadows8146]

Yes. You remove the spray tip and it makes it easy to wand out sealer as needed. Then when ready to spray to u just screw the tip back in and get going. Eazy peezy

[@speeder9554]

Long brushing a parking lot when you have a wand is craziness, The amount of extra work smh

[@TyKubinski]

We offer different packages at different prices so they wanted it brushed so we charge more for big parking lots

[@daveklein2826]

Did you ever think it's the customer preference spanky

[@speeder9554]

@@daveklein2826 Brushing is bad, too thick, and doesnt fade evenly for the next coat. The only thing that should be brushed is the edges

[@executiveinvestments]

@@speeder9554 what??? Brushing is 100X better than shit spray. It fades evenly if you know what you are doing. Obviously you dont know what you are doing. "Sealcoating is life" channel would teach you a thing or 2.

[@Brandon-no3vc]

Your walking in it leaving tracks everywhere and you call yourself a profetional what hhhhhhhhhhhhhhhhhhhhhh

[@froggey5689]

They are waking in it yea. However, if you paid attention they are covering the tracks they make. This is common practice in the trade when hand applying. Any pro would know this!

[@Brandon-no3vc]

@@froggey5689 they dont even vut the cracks b4 they fill them

[@jgg204]

Those cracks are hardly filled enough

[@daveklein2826]

Another ignorant comment

[@deadpool-sj7pw]

Look at all those footprints😂😂😂😂🤦🤦🤦🤦 A place that big u should be spraying it on

[@TyKubinski]

The customer wanted it brushed with a second coat spray and we take all of the foot prints out of you watch the whole video

[@jeremyarcher1202]

That’s the right way to do it! There were footprints when they were pushing sealer but then they went and finished it like awesome seal studs. It’s in the video. That why they call it finish brooming. 😂 I want to see spraying in next video. Nice work

[@drones9667]

Did you watch the video in full? You can see a second guy behind him going over footprints lol for example 4:15

[@bigbuck807]

Looks super thinned out

[@TyKubinski]

Why so?

[@kamonmeadows8146]

You don't want it to thick or it will set up faster than what you can manage working with it. My boss uses a lower percentage water mix on our sealcoat and it's hell working with it when the sun is out

[@daveklein2826]

Not thinned at all

[@breken2088]

Так залипательно дорогу говном еще не кто не намазывал

[@ipand1011]

В армии мылом підoрat

[@СергейЛобанов-я2л]

👍

[@TyKubinski]

👍🏼

[@MrMathewx]

It does not seem professional to me. the holes are still there. the surface should be sanded and well supplemented before securing it.

[@TyKubinski]

No company does that before seal caoting

[@acdg7431]

What do you mean by sanded?

[@kamonmeadows8146]

He has no idea what he is talking about. Everyone has different application methods but there is nothing wrong with the way these guys are doing things

[@daveklein2826]

Little Matty is clueless

[@redditor7548]

Lots of missed cracks my dude, why don’t you crack seal everything. Usually clients are willing to pay the cost to have all cracks sealed

[@TyKubinski]

We bid our jobs and give them a choice on how many linear feet of crack fill they would like to pay for my dude

[@billybluess]

@@TyKubinski hey man how do you get commercial clients if I may ask?

[@redditor7548]

@@TyKubinski if you don’t seal all the cracks then it’s a waste of cash because the same amount of water will just go underneath the pavement and wash the sub base away in the cracks that are unsealed. All water needs to runoff the pavement or into a drain for longevity. Also water base asphalt sealers are garbage

[@kamonmeadows8146]

At a certain point it's almost impossible to get every single crack on a parking lot. You just have to do what you can and meet the amount of product applied specified in the work order. It's not gonna be perfect unless you tear out and redo the whole lot

[@daveklein2826]

They missed NOTHING PRINCESS

[@nick-un9pk]

Tweeker music.

[@daveklein2826]

Great music

[@williamslominski1632]

Spray would look so much better. #BRUSHMARKS

[@macsloan58]

And last 1/4 as long.

[@jackyoung2441]

@@macsloan58 how long should it last? Why brush when you can spray every couple of years and have money coming in

[@TyKubinski]

We normally spray but the customer wanted it brushed

[@ERBViewer]

you need way more sand in your crack filler

[@TyKubinski]

Which cracks are you referring too?

[@francksoucy7690]

use brush or squeegee

[@TyKubinski]

What?

[@francksoucy7690]

@@TyKubinski utilise tu une brosse ou une raclette !!

[@ChiefCabioch]

You don't walk through the sealer, you use special brooms or squeegies and work from farthest to closest, from outside to inside, these are not professionals,

[@benebutterbean2737]

And YOU would F-ing know!

[@TyKubinski]

This is how everyone seal coats

[@ChiefCabioch]

@@TyKubinski no it isn't, a professional job doesn't spra edges.....Ever, you don't walk through sealer, and all edges are brushed or squeegee, and centers are sprayed, been in the business 35 years, if your guys do edges first, then spray, from farthest to closest, the jobs nicer, and faster.......

[@ChiefCabioch]

BRASHEAR pavement coatings, 912 north Victor Tulsa, Oklahoma

[@ChiefCabioch]

You don't have a clue, not one thing you show is professional

[@ButterMaster10]

Seal coat is a paint job. Waste of money. Does nothing for asphalt. Purely cosmetic.

[@crabmansteve6844]

This is retarded, they're literally pouring hot liquid bitumen into the cracks, *sealing* them up, it prevents water ingress and by preventing water ingress you prevent future cracks, potholes, sinkholes and other problems. Now blasting the entire parking lot with it is cosmetic, but they VERY obviously sealed the cracks first.

[@JohnSmith-do1qv]

Not cosmetic at all holds your pave job together.. ever notice little rocks chipping off the top? Needs sealed 😂

[@Malek-fm8vk]

Not when you won it..😂🤣

[@jeremyarcher1202]

The sealer ,if done right , protects and bonds to the asphalt. It seals it and is far cheaper than new asphalt. You’ll figure that out when you have to pay for an overlay.

[@cameroncrider6970]

Compare a sealed and non sealed drive way, same ages. Then try to repeat what you said.