Program a Craftsman Garage Door Opener.

[@eaccents]

I have a Craftsman 139.53513. Bought the linked remotes and followed your directions -- worked perfectly! Thank you!!! 😊

[@jpdutch47]

I have the same opener as your video. Ordered the remote from your link. Hopefully it works. Thanks (I also booked marked your video so I can look at it again on Thursday when remote arrives.

[@WillyUnger-co5ox]

Where is the link ?

[@scottwagner9468]

It worked, thanks! I have an old 9 pin opener. After pressing the learn button to get the solid blue, I had to press 10 times while flashing blue, keep it flashing, do not hold it to long to make it go solid again.

[@heroknaderi]

Cool

[@tatersaladde09]

Thanks alot! By the way for those who still cant get it to work....try switching your dip orientation on the motor around to a new combo

[@doreenbibby7941]

Big help thank you for doing this video

[@jwatwater]

I'd switch around some of the dip switches since you've posted this on the internet, haha

[@billybrown284]

Good

[@kevinkall8547]

I see others searching social media looking for replacement remotes for 139.655000 Sears Craftsman garage openers. Wire in another Craftsman receiver model Craftsman 9-53751. The range is about 50-75 feet away from antenna. The red wire went to the left post on the opener.

[@blainesuque1411]

will this work for 13953415sr ? mine looks exactltly the same as yours, only thing is i too do not have the remote but still have the wall remote in the garage. would that have the dip switches in it as well?

[@EBEEZYCL]

We brought a house and it has a sears craftsman 13953638srt. Just wondering, did you get yours to work? I’m hoping I can buy a universal remote as well. Our house had no remotes.

[@raybay2665]

I have this exact garage door opener and I can’t figure out how to erase the remote control after loosing it. Would you know how to erase old remote in order to program a new one?

[@mrnacho2515]

Did u try changing the sip switch from positive to negative ?

[@siuyim832]

Great! I did it and succeed!

[@thomasfarnell1]

Wonder why didn’t for us didn’t even help for us. Me and my dad for 3 hours try work didn’t ever work.

[@coxandrewj]

He briefly mentions it, but are *all* the switches aligned properly?

[@sherrybradley2796]

Thanks for the video. Very helpful!

[@outdoorswithjim207]

Glad it was helpful!

[@amintoit2]

What if your neighbors on the right side of your house has the same garage door opener and when she comes home your garage door pop open. How do you reprogram it and what to do if y'all have the same model number on the receiver 😢

[@outdoorswithjim207]

Buy a new garage door opener.

[@tracytoo9419]

Did you try changing the dip switches?

[@charlottetaravella6596]

How do you get to the switches on the motor of an older craftsman? I lost my remote, so I can’t duplicate the codes! Help!

[@delnunez8127]

Did someone respond to you...I copied the Dip switches on the unit however the new remote has 12 dips and the garage unit has 9 .help

[@Mainelywork]

🤘

[@nashpreb]

i have the same sears craftsman garage door opener. where is the link to get the universal remote that described that works please. The one i can buy from Amazon. Thank You.

[@stevelee8648]

this video is a life saver, thanks!

[@outdoorswithjim207]

Glad its helps.

[@hannahthompson93]

What if you do not have the original remote?

[@outdoorswithjim207]

By the one in the description.

[@hannahthompson93]

I'm not sure where to find the dip switch pattern- you configure the new universal remote using the original remote, but I don't have the original. I have purchased the one you linked.

[@naenae5718]

How do you know the codes if you don’t have the previous remote and it’s hilarious because you have the same older remote. I lost in my car when it was totaled in the wreck last week. How can I reset the DIP codes ? Please help

[@outdoorswithjim207]

If you don’t have the garage door remote to look at the dip switches, look on the back of the garage door opener and the dip switches will be located there as well. Hopefully this helps.

[@forwardsthenback]

Thanks so much for this! Didn’t think I would be able to find a universal remote that would work. This was so helpful.

[@outdoorswithjim207]

Glad I could help!

[@fredwerejay1524]

Does this one work with a sensor? There isn’t a grey terminal

[@ernestbarrientes4961]

I don’t see the link

[@jaydiphirpara9052]

Out of 4, which two cables are for power?

[@matthewsmith3403]

Does this have sensors

[@Alyssalk290]

Can you make a video for a keypad as well? This was also very helpful so thank you!!!

[@outdoorswithjim207]

I will try!

[@terrihaleyssugarshack]

The title should be program craftsman to a universal. I have the old remote and can't seem to reprogram it, and no learn or reset button.

[@zulemaR11]

THanks🐢 I was tired of getting my butt out after freezing rain and cold temperatures and now it's sunny outside but it's still annoying to have to walk over and close and open the garage door every time I leave. I thought I had to deal with this since my garage door opener is so freakin old. Just bought the control hope it works!

[@jasonc4882]

Did it work?

[@ke6836]

How do you erase your garage door opener memory?

[@blandry61]

What do you do with the switches when they are set to the middle and not on or off?

[@outdoorswithjim207]

Just match the garage door opener with the remote and you can change the switches as long as they match.

[@blandry61]

@@outdoorswithjim207so id have to change them on the other remote also then right?

[@outdoorswithjim207]

@@blandry61 yes

[@r.f.2615]

Do you think it's going to work for craftsman 2001 year model?

[@outdoorswithjim207]

Not sure, but I would lean more towards probably.

[@r.f.2615]

@@outdoorswithjim207 thanks. I just ordered it, and I will let you know. Do you know what to do if the wall console doesn't work neither. The old number doesn't open the door, the battery is good. I don't know the main number

[@EdgarGarcia-dw2qb]

I still can’t seem to know how to program the remote I bought the same remote from the link

[@valerierichards6648]

THank you so much! I was able to buy this remote and have it work for an elderly uncle's garage door. Any chance you know how to also program the original remote, once the dip switches are changed? Thanks again!

[@outdoorswithjim207]

On the original remote and garage door opener, just match the dip switches in the same alignment and it should work. Glad I could help.

[@valerierichards6648]

@@outdoorswithjim207 Thank you for your response! Unfortunately it's not as simple as just matching the dipswitches - I tried that. Makes sense that it doesn't work, because How would one remote operate 3 garage doors? I'll keep digging, but thanks again! You saved me a lot of time and potentially money but buying this amazon remote (even had it here in Canada thankfully). I was able to program both the garage doors with this two button remote.

[@EdgarGarcia-dw2qb]

The negative stay down or up

[@outdoorswithjim207]

You can set up any way that you want. But negative is down.

[@bradplumb64]

On the new remote, it has only up and down. The older remote three positions. Up, 0 and down. How do you replicate it with only the two positions?

[@outdoorswithjim207]

The middle one is just a neutral. Just set all the ones on the garage door opener either up or down.

[@richardmann5883]

my older has 10 dips new one has 12 ????

[@outdoorswithjim207]

It should still work as long as you got the one in the description below.

[@johangranfors2854]

So wnere is the link.