In this video we demonstrate how to install a Progressive Suspension Monotube Cartridge Kit on a 2014+ HD Touring bike. For more info please visit www.progressive... For more tech help contact info@progressivesuspension.com
Пікірлер
@performancebagger35062 жыл бұрын
Very impressed with the 412 Series Progressive rear coil overs we installed on 2021 RGS #performancebaggin build!!
@bradlevander28087 ай бұрын
i'm debating between the 412 and the 444's...?
@Zukgod1 Жыл бұрын
So why do the printed instructions say 300ml on the cartridge side and 170mm on the left side? This video clearly says 200ml in both sides. Which is it?
@dougfresh1341 Жыл бұрын
Tried to install the 31-2500 Mono Kit on 2012 HD Glide. It says to use the stock bottoming cup. But if I do the fork tube gets stuck on it and won't move up. The bottom cup fits fine over the monotube bottom rod. But it's as if the cup is too big to fit inside the fork tube. What am I doing wrong??
@Zukgod1 Жыл бұрын
FYI, this info (Oil Level) in INCORRECT as per the Progressive Tech Support line. DO NOT FOLLOW THIS GUIDE.!!! I noticed a discrepancy on the video (printed is different) so I emailed and called them. For what it's worth I was also told by the lady on the phone that this page was NOT owned by Progressive Suspension
@rolandos648 жыл бұрын
One leg is shorter then the other. Tech supports says that's normal. I fail to see how. One tech told me to jack up the longer side, didn't sound right. I could only imagine the stress it would put on my fender and in the Axel. I called a second time, second tech tells me to pull on shorter side. I haven't done it yet. But does t sound right either. They both told me once weight is applied, length is equal.
@dougpfaltzgraff4 жыл бұрын
what is the kit number that you used on this bike?
@hollingswoc9 жыл бұрын
200cc of fork oil in the left hand leg? How is that right?
@JARuiz-vh4zy5 жыл бұрын
according to the video its the same cc for both
@stanlawtonАй бұрын
Because the oil is only used to lube the springs and prevent rust inside the leg.
@jorgesevilla65826 жыл бұрын
What’s the best way to cut the pvc spacer to 1”?
@JARuiz-vh4zy5 жыл бұрын
if I drop mine 1" I was sing a hack saw but might drop mine 2"