Project 091 | Chain Saw to concrete groove cutter

Construction number 091 is a very convenient tool for the constructive industry!
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitEx...
► Second Channel: bit.ly/MakeitEx...
• Get access to the downloadable Plans: bit.ly/MIEplans
• All details: bit.ly/2tRUNzM
• Help us on patreon: bit.ly/MIEpatreon
Welding Machine:
• Mig: bit.ly/Rallymig
• Tig: bit.ly/PITIG
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co....
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitex...
• Instagram: bit.ly/makeitex...
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
• New Patrons:
Molnar, lukas klaproth, Jakub Smardz, Lee Bennett, James Knox, Nicholas Sanz, Rick Bull, Paul Hess, alnan, Daniele, Ruben Alejandro Paredes Rodriguez, Mauricio Jorge Costa, Henri Kytömaa
• Playlist for all videos: bit.ly/2XJggZu
• Intro Design: vimeo.com/9014...
♫Music:
12:47 Impact Intermezzo by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
#makeitextreme #makeitextremeshorts #chainsaw

[@markfryer9880]

As per your usual efforts you have made a practical tool that is both useful and scary at the same timev. Your lathe skills, and welding skills are really coming along while your video and editing skills are reaching professional standards.

[@user-jo4me4cq7d]

Очередной шедевр!

[@MacStrange]

Great idea and very good work

[@bruceminnier2936]

Another well designed and expertly built machine. Your work is second to no one.

[@alonzosanchez8577]

Every time I think you guys can't do anything cooler boom!!! you do it again awesome job! 👍👍

[@user-vw8nw6pk5c]

د تو

[@simonapelle6012]

Vai a farti nel culo

[@leonardoricciuto5079]

Sei un mostro di bravura . Grazie del video.

[@Zraibicorp8233]

You are the genius my brother

[@1258alex1]

Καταπληκτική δουλειά! Ειδικα στα χτήματα για τα αμπέλια! Μπραβο και πάλι!

[@nadeeshajayathunga95]

Great product.

[@mesha_nv]

LOVELY WORK

[@arafatal-gharabi7066]

What wonderful project Every time you make nice thing 😚😚😚😙😙😙

[@jayajayawickrama7546]

Your presentation is very good.

[@jorgesantos7391]

COOL, VERY GOOD

[@mmk4854]

Wow super idea

[@johnsine7154]

I think this Is one of the most useful ideas for contractors and demo crews to think of....I know I would goto a machine shop for this build, great vid!

[@soniacarpentier3039]

Bien le vidéo

[@thenuffnuff]

nice work as usual. Can I suggest you may want to add a way to supply water to the discs when cutting concrete or stone? just a dribble on each to keep the dust down and the discs should last longer

[@eloyworkshop541]

Un proyecto impresionante!! Sin duda funciona muy bien, me encanta vuestros trabajos!!! Un fuerte abrazo y saludos desde España

[@Nolifer89]

You are genius

[@brandon2076]

A cool project for sure! Although with all the airborne abrasive dust produced, those bearings won't last long since they're not sealed or even shielded. But many people will misunderstand this video.....i'm fairly certain this was just a proof of concept, just for fun, if not then probably just occasional use. This isn't going into production or being sold. When he makes things like this, its mostly just seat of the pants ingenuity, and working with what he's got to reach the goal.

[@dannyoktim9628]

Like always, never think in the box. . . .think about it

[@darellroasa6846]

brandon2076 many people will misunderstand this video, almost saying those many people aren’t smart enough. The bearings aren’t sealed so this project will never make it for industrial use. yeah DICK it’ll take a genius to figure that out. We all man have two heads, choosing which one to use is important. My balls is a proof of concept, Im just saying this for fun. 😆

[@julioccb5456]

Tu Hhj

[@user-uy5nj8rm4s]

D

[@lazaroslazarou6526]

Excellent project beautifully executed!!!

[@yigitfurkankr764]

Abid selçuk

[@silvergrizzly316]

You my friend, are one BADASS builder!!! 👍👍

[@thanhdoanhbobo6103]

sẽ không làm phiền bạn bè mà chơi bóng 600th

[@manickn6819]

Very useful tool for construction. Generally the tracks are cut one at a time. This definitely reduces the time a workman needs to be put on cutting chases.

[@ambroscustom]

You also need to make some attachment for the cooling of blade to increase blade life.

[@barthanes1]

Yes, a guy with a hose needs to keep the dust down.

[@markfryer9880]

@@barthanes1 But if you attach the hose and spray nozzles to the saw you can then do the job by yourself and the spray will be directed at the source of the dust.

[@saipulgendeng6964]

Literatur dan apuy ewtr mbnlhsa

[@haierrevou4803]

AMbros Custom k

[@user-os7nt8gm4n]

Weh

[@user-kt2hb8xr3p]

بارك الله فيك ننتضرك بفارغ الصبر انته الاول دائما

[@peebee143]

Brilliant bit of kit!!

[@narcis87sel]

Nice Tig weld!

[@DeejayOmbra]

Nice tool

[@btechprotech6343]

Good I like this.

[@patrickbrander1775]

So you made a quick cut from a chain saw. Two thumbs way up

[@ushcreator]

very good ... 👍

[@jonathangb7963]

the good thing is you can use it as a chainsaw and concrete cutter amazing idea man

[@castolum]

Do you usually sell your tools? Or do you make them custom on request by clients? Or just for fun?

[@elijiawatkins3080]

Nice build

[@PopaAlexandru.]

Excellent. A cooling circuit for the stone cutting blade is required. And it can be simple and possible because the drive of the disc is not electric. The resulting dust does not rise in the air - the vacuum cleaner is removed when cutting the installation channels and the wall is ready for plastering the pipes. The original oil pump must be deactivated - removing the drive worm? The sproket must be welded in the chain wheel, ideally it would be to use a belt because the chain is made of steel and the steel rusts in water ...

[@Redneckmfg]

Awesome Build …. Useful tool ….

[@TorchFpv]

Husqvarna makes one of them it's called a plunge cut saw, and the nuts are flush with the blade and guard so you can cut as deep as the saw body..

[@popol1976]

Good job guys

[@robertgemski7728]

Awesome and scary at the same time....i like it!! Ive told you this before your engineering and mechanical skills are on another level my friend.

[@satriabergerak2770]

Very good

[@nufareln7443]

Nice project homemade, but with water at disck is so good !

[@muhammadarif4715]

nice idea

[@nilugajjar8205]

So nice

[@Tech4mukesh]

Nice one

[@mariliaranielly]

Profissional!

[@LIANTR]

Excelente video maestro

[@CARCARÁdoSERTÃO]

Nice job. Congratulations from Brazil.

[@lucasconstantino3884]

good job

[@user-up9iz3zk2y]

on a chainsaw, when installing such console it is necessary to replace the air filter! stone dust is finer than sawdust, and therefore flies into the cylinder. the same when cutting metal with an abrasive disc на бензопиле, при установке таких насадок обязательно нужно заменить воздушный фильтр! каменная пыль мельче древесных опилок, и поэтому летит в цилиндр. то же самое при пилении металла абразивным диском

[@siskasetiyowatiwati3718]

.(´ε｀ )♡(♥ω♥*)(｡’▽’｡)♡(♥ω♥*)(♥ω♥*)(´ε｀ )♡(´ε｀ )♡(♥ω♥*)(♥ω♥*)(♥ω♥*).l

[@grayempepper8413]

Nice work

[@printmix]

Very good!

[@pinkponyofprey1965]

Kewl project!!! If you take the first thing you cut out of the concrete slab and cut it again you have a perfectly square block that will fit in the groove you cut in the wall for what I guess is some electrical installation. You can even polish and buff the square block for extra points! :D

[@funguy4900]

Nice, but I don’t have a nice machine shop like you do.

[@user-cz9kl5fk2y]

good idea

[@user-qw9px6jq9i]

Perfect!

[@anatolich4979]

что?

[@chavocuero2856]

El ingenio y las maquinas lo son todo excelente trabajo

[@jlucasound]

You Guy(s) Are So Good!!

[@keepthefuckngbeatup2690]

We want more!!!!

[@skrem63]

МАСТЕР !!!! УДАЧИ !!!!!

[@user-kr1jh1wi4w]

Cool work 👍

[@rolandocrisostomo2003]

Remember: safety first... And that means, safety gear, safe and proper use of tools, and making sure your tool doesn't break off and becomes the blade from "I come in peace".

[@Enrique29482]

Quien viene por parte de Un Poco De Todo?

[@jasirmuhammed5643]

please do a simple gadget for carrying heavy boxes,etc on stairs..,something like step climbing trolley... make it extreme plss

[@marbike21]

Numeri Uno!!!!!!

[@ramonquirozvazques2730]

amigo eres lo máximo mis respetos para ti...

[@beliasphyre3497]

Oh deer God, that is the second most frightening tool I've ever seen. I want one.

[@joshd2013]

This is great I can think of many uses for it proof of concept achieved good job

[@stinger78420]

Hummmm... alors cette fois je vais dire ce que j'en pense ^^, j'aime toutes tes vidéos déjà ! Merci d’ailleurs ! Je trouve que la tronçonneuse n'est pas assé puissante avec deux disques et un petit apport en eau serait le bienvenu ! Continus comme ça c'est génial, super boulot !

[@roniwani1451]

awesome.... 👍 , good content.

[@rossjonnes1582]

what an awesome video! I like it. If there were love react you are the person who is suitable for that. Thanks for this productive video

[@Lishchynskyi_Y]

Отличная идея и реализация вообще по высшему разряду

[@baorozzo]

It looks like a weapon that you could find in a zombie themed video game! Impressive!

[@LinLin-yg4wr]

บรถรงฃทอสงงี้เ

[@hugocamaras]

Fantastic!

[@Nixima81]

Impressive, nicely done.

[@stephanie68210]

superbe réalisation comme toujours!

[@relaxingnature2617]

I want one of these with 4inch spoons on it ..to dig dirt on a hillside to cut trails

[@Disinterested1]

move the guards forward and fit a sprayer ..... would be a better work angle as atm you are kind of out of balance cutting on the front so it will want to bounce

[@mxrider2strokebraaap54]

Insane build as always!

[@barthanes1]

This is a really cool tool. When I was a kid, vacationing in Mexico, I saw construction workers use a hammer to break wiring chases in a perfectly good cinder block wall. I thought there had to be a better way.

[@carlasousa526]

Nice verygood

[@anangth5365]

Amazing👌

[@nicolasrubio7114]

I come for Un Poco De Todo

[@brunolindner8185]

Adorei o projeto make it extreme!!!!! Beautiful, excelent, strong.... Congratulations

[@ehsan3685]

👍🤩nice work!

[@latinsantos6162]

That is so cool and smart other tools require you to bend down this one you made you don't have to worry about that

[@manuelgarciafranco]

Que pasada de proyecto con la motosierra. Saludos.

[@MinhasA]

concrete dust will be abrasive on cylinder wall of saw... you can just replace the saw with another cheap one when the time comes, or keep changing air filters :) I always look forward to your videos!

[@mintaduit985]

All nice guy need this machine tool 😄

[@user-bl6eg3wg2m]

روعة ابداااااع ماله مثيل احسنت

[@ring1indonesia]

creative...

[@matthewamick5535]

Incredible job beautiful work man

[@MCsCreations]

Amazing job, dude!!! 😮

[@MakeitExtreme]

Thanks!

[@hirsch5576]

You could also use a chain who is able to cut stone easily

[@devojitborah4804]

I like it...

[@aussiemanlyman2138]

Why two left hand threads? One should be left, and one right hand.

[@Puzzicanello]

@@gamerslap they need to be different because both blades are spinning the same direction

[@georgf9279]

@@gamerslap No. One nut ist right of the one blade, the other nut is left of the other blade. So the theads should be different too. In this case the left side (from the operators view) should be a right hand thread.

[@madmodders]

Yes, two left is as bad as two right. They need to be different.

[@aussiemanlyman2138]

@gamerslap , no need to delete comment, it is all about education here. Other people probably thought the same as you. Trucks have left hand and right hand wheel nuts, to help them stop coming loose. I don’t know why they don’t do the same for cars.

[@RubenLensvelt]

@@aussiemanlyman2138 Cars not perhaps for "consistency in procedure". Cars are for consumers who should be able to replace the wheels by themselves and left-hand thread would be too confusing.

[@matyasmoudry2122]

Beautiful welds 👍

[@Sparkystacoma]

Great for making trenches for conduit runs. Hopefully it's the same width as a trenching shovel

[@beramjayakesuma2064]

Mantap pake belah kayu gan. Rakit pake belah kayu gan, circulaw Saw lebih besar.

[@panayotistavrinos684]

Awsome build. That is a versatile tool. I could definitely use it 😉

[@dewagangga2822]

I give advice, please give water so that there is no flying dust

[@Johnrider1234]

Gangga 1995 run a garden hose beside it

[@snrsmh]

I agree with you

[@georgf9279]

@@Johnrider1234 Make an attachment for the garden hose to the device though so you don't need aother person to hold it.

[@madeariartha2546]

the flying dust man

[@aiekseiepoxun2232]

@@snrsmh к черту