Project 2014 Forester: Fix Horn, Steering Wheel Controls, Etc. Easy DIY Clock Spring Replacement!

Please Like, Comment, and Share. Be sure to subscribe for future videos. Don't forget to hit the bell icon for notifications. KZbin has changed what they show subscribers!
Subaru Specialty Tools - www.amazon.com/shop/mrsubaru1...
Subaru Head Gasket Essentials - www.amazon.com/shop/mrsubaru1...
Subaru Timing Belt Essentials - www.amazon.com/shop/mrsubaru1...
StoreFront - www.amazon.com/shop/mrsubaru1387
If you like the vids and want to help make more: paypal.me/MrSubaru1387
----I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself.----

[@paulfoglia8115]

Excellent job. That video was exactly how all DIY videos should be done. No fluff. No rambling. No wasted time watching someone fumble a tool.

[@alanlangley7246]

That man can fix anything i do believe he can fix the crack of dawn

[@markmartineau1015]

Thanks for the help with the economy as it is every dollar helps. My only advice is to say the pins to release the bag are at about 2:00 and 10:00 from the side holes upon entering.

[@DDB168]

I've never been inside a steering wheel. Doesnt seem too scary, and you did it one handed 👍

[@MrPoppyDuck]

Thank you Mr Subaru for another very helpful video! You are making it possible to be less intimidated when working on Subies.

[@neilh9442]

I appreciate you mentioning the prior tech not putting the screws back on the clamshell. And that you found some and did. Also knee/torque/camera skills are impressive.

[@RTCompany]

Recently got a 2013 Legacy and your videos are getting me up to speed on the important things these Subarus need. Thanks!

[@hannahprice781]

I replaced the relay on my 2015 forester and the fuse is good. I guess this is my next step to see if it'll get my horn working. Your videos have taught me so much and saved me from having to go to a mechanic. Thank you!

[@jameshyde1501]

I am fortunate that my subi.. is in BEAUTIFUL! shape for a 2011 Outback

[@kidwelldavid6136]

You still make that look easy. Great video.👍

[@MrSubaru1387]

Thanks 👍

[@rmarkw1]

Thanks. Used this video and 1 other to replace the clock spring on 2104 Forester with dead horn. Air bag was a pain to remove. The springs are difficult to see. It's a good idea to take a marker and draw a line down the steering wheel bolt and mark above and below to help line up steering wheel when replaced. $30 clock spring off eBay is working fine for now.

[@richroggio]

thanks Pal, That was great. very informatve. I love my 2015 FXT Touring and my 2003 FXS Premium 👍

[@MrSubaru1387]

Glad you enjoyed it!

[@schumacher47]

Again awesome DIY. Thank you.

[@JenniLudes]

You made that look easy. I'd be so paranoid of accidentally deploying the airbag even with power disconnected, ha. Those traces in that cable seem so fragile. It's a wonder they hold up as long as they do with all the movement they would experience in a steering wheel. I work on computers and see ribbon cables fatigue on laptop screen cables with less "mileage." And I would assume most cars with steering wheel controls have a similar configuration.

[@michaeldurrett8388]

Don't be afraid of airbags. I used to be. Just always disconnect the battery and remove the fuses before service and you'll be fine. They can't just goo offnon their own. They have to get voltage to those terminals.

[@JenniLudes]

@@michaeldurrett8388 Oh sure. Use reason and logic to reduce my crazy fears, ha!

[@KentuckyRanger]

I'll bet, the horn was on all the time, that's why they took out the relay, LOL!

[@MrSubaru1387]

That’d be my guess as well.

[@tristanj7551]

thank you mr. subaru for another fantastic and informative video!

[@mikeabbitt8309]

Amazing how you can do the job while holding the camera.

[@1717jbs]

Great vid, Thanks.

[@fordfactor]

Excellent. My 02 H6 has a clock spring that sounds like a rattlesnake when i turn the wheel. Repair thankfully looks straightforward!

[@MrSubaru1387]

Haha, my old 02 L.L.Bean's clock spring has been sounding extra crunchy lately as well. But I guess it's tired after 303k miles! lol

[@jameshyde1501]

But you make it look so!... easy. I think if it were I doing the work, perhaps I could have done it; but! it would have taken me two weeks to get it done.

[@MrSubaru1387]

It’s not that bad! lol

[@Jkorchak]

Hey MrSubaru kind of new to your channel but love your videos!

[@Hammsolo77]

Thank you

[@YerkoZarricueta]

Great Video, muchas gracias.

[@PickleRickle408]

I just paid someone to do this last week on my 2015 forester! :( Great video though!

[@MrSubaru1387]

Oh no!

[@ConsolidatedPBY]

What’s the chance of you doing another ASMR video for old times sake? The old diagnostic one was pretty much bliss.

[@ConsolidatedPBY]

The one where you jiggled, joggled, unzipped, fiddled, jostled around, etc…through all the bits and stuff

[@MrSubaru1387]

I’ll see what I can do.

[@sssnake2332]

Wow, 224k on a 2014, pretty impressive. I'm about to turn over 200k on my 2007 FXT and it seems like a big number to me.

[@twiki1963]

The only symptom on my 2013 Crosstrek was a dead horn. Everything else worked.

[@MrPoppyDuck]

Just before I pull off steering wheels I take a sharpie and draw a line across the shaft onto the wheel. That way I know how to line up the wheel without guessing when I put it back.

[@MrSubaru1387]

Never had an issue without a line.

[@mdonola]

Magnificent change to the ClockSpring. I was waiting for your video, I only have one question, is it not necessary to disconnect the battery when handling the Aibag? Good job. Best regards.

[@MrSubaru1387]

Yes and no. Lol

[@mdonola]

​@@MrSubaru1387

[@sviat2459]

Could you, please, explain how did you know that the problem was in the clockspring and nothing else in this case? I mean, the wires under the clocksprind could be damaged or the inner electrical system etc.

[@taeglanthornton]

Couldn't be better timing! About to delve in to this on my 2006 OB 3.0 to attempt to diagnose a non-functional cruise control issue. Thank you!! Generally when a clockspring goes bad, will all the steering wheel functionality fail or can it be specific features?

[@MrSubaru1387]

Sometimes everything goes like mine, sometimes only a few traces may fatigue and break.

[@brk4684]

Thank you for the good video! BTW your discount code for the Subaru guys does not work ...they said they do not accept any discount codes!!!

[@user-ky3pr6pp5p]

My steering wheel feels loose by 1/4 of an inch when driving, so I’ve tighten the bolt under the airbags?

[@hussainmohd6298]

@MrSubaru1387 Thank you for all the videos, I always learn so much from watching. I have this same exact model forester, and It went through the Engine block failure issues, had the engine replaced alone with the instrument cluster, Key and ECM. now i have this issue with a P2006 & CEL "Intake manifold stuck closed". I had the manifold removed, cleaned the TGVs, IAC and throttle, and replaced the TGV actuators on both banks... (started the car with actuators exposed and they spin) but still having a problem with it. The engine idle RPMS fluctuate and whine and I cannot get the Vehicle to accelerate properly. my only remaining guess is either the ECM is bad or the entire harness. any tips would be helpful... thanks.

[@schumacher47]

Can you do a coolant replacement on that model.

[@timbrown9731]

Funny how the Japanese made Subies seem to have the blue Subaru star emblems vs the Indiana built ones on the wheel.... mine is black.

[@rblackwood90]

I have a 2014 Impreza (Base) and only my horn isn’t working on my steering wheel. It slowly went from working, to only work when the wheel was turned, to now not working at all. Should I replace the entire clock spring? Or is there another connector that possibly went bad in there?

[@StormKingLand]

What to do without tension reading ratchet, or airbag code thing you used at the end?

[@Taryncloud9]

So what’s the case if all other controls work but the airbag doesn’t? It did got a while only when it was turned to 6-8pm

[@rainyday13]

I have a 2016 forester and the horn does not work. Everything else does though - All wheel controls, cruise, radio etc works fine. Checked the fuse it's good. Does this mean it's probably the relay? I am waiting on the tool I ordered to get it out because I can't for the life of me grab that thing to pull it. I hope it's just the relay.

[@gregnelson7545]

My padels for the multifunction display quit working on my 2014 forester. Is it possible the clock spring went bad and that's why they arent' working? If not, what could have caused the MFD paddles to fail?

[@bergmanst]

Is there a quick place on the net to find torque setting for all parts needing to be torqued

[@MoneyMarcMes]

My question is do you disconnect the battery entirely and let sit for 15 minutes? Or just the fuse? Isn't it safer to disconnect the battery? Will that cause issues with programming?

[@archieharamis8593]

I’d really like to know this too! Just got quotes $800 Australian dollars to fix this on this model because horn is r working and willing to give it a try, but not sure what else I might stuff up in the process!

[@kamehawaves4days]

Would this be pretty similar for an 08 model?

[@blitzedz]

I'm having a similar issue with my 2015 Forester 2.5i Premium. My steering wheel controls still works, as well as cruise control, but the horn doesn't work. I checked the fuse for the horn in the engine bay; fuse is fine. Want to check the horn relay, have no clue how to pull it out? 🤷‍♂️

[@dant3113]

I just bought a 2013 Crosstrek salavaged. Just noticed the horn doesnt work. The fuse is fine but i get no power to the fuse. Could this be the problem ?

[@bigdaddymak1439]

Can you put a link in Somewhere or am I missing it for the OE parts?? If I missed tthanks

[@TheCharacter97]

Hello Mr Subaru. My 2010 outback has steering volume control but they have never worked since I bought it 4 years ago at 110 000 miles (now 185 000 miles). They did work at some odd point for a week or so when they felt like it and then never again. So from my understanding replacing the clockspring should fix my issue? Ive got a money to put aside for a timing belt, valve cover gasket, hg and you know, high mileage stuff.. So a clockspring isnt my main concern but if I get my hands on one it should technically (of course you havent diagnosed) fix my volume buttons not working?

[@MrSubaru1387]

You could have an issue with the clock spring. You could have an issue with the volume switch itself. Hard to say. Would have to text it.

[@TheCharacter97]

@@MrSubaru1387 so basically I should check the wiring?

[@MrSubaru1387]

@@TheCharacter97 correct

[@TheCharacter97]

@@MrSubaru1387 Thank you for the help

[@williamhelena7592]

My steering wheel makes a *boing* sound like you’re plucking a spring. In your experience, does the clock spring ever cause noises like that?

[@MrSubaru1387]

That’s likely what you’re hearing. My old 303k mile Outback is getting loud when turning.

[@newbeginnings8566]

A couple of questions.. if anyone can confirm? 1.. How hard is it to manhandle the steering wheel to get it off? I'm toying with just buying a universal steering wheel puller but i guess I'll only ever use it once.. 2. disconnect the battery or just remove the airbag fuse? I don't want to take any risks nor have airbag warning lights left on . I'm going to have the wheel off for some time as I'm going to recover the old wheel.. My wheel is leather and only on a low mileage 2017 Forester but the leather (leatherette) finish is awful..

[@bensmooth707]

Had an unfortunate clock spring explosion when I yanked the wheel off to sew a cover onto it (airbag wires were snagged). Wound the ribbons back together as best as I could, and all of the buttons work. Problem now is that my steering angle sensor is off by 30 degrees according to my scan tool, which is apparently too far for my scan tool to reset. Thinking about taking it off the angle sensor and manually moving it until it reads zero. Any thoughts?

[@bensmooth707]

Not sure how the sensor got off by 30 degrees in the first place, but I was able to reset it 9 degrees at a time with a cheapish AD600S scan tool. View steering angle -> move wheel until it is 9 degrees towards center, reset to zero, and repeat until the wheel is actually centered.

[@mserica6487]

Any idea how the ribbon cable got crimped like that?

[@MrSubaru1387]

Like just fatigue/age.

[@ReginaThomas09]

My power steering is gone on my 2014 Subaru! I don't know how to go about it...

[@CrazyCat229]

I LOATH CLOCK SPRINGS.... T_T

[@fredharvey2720]

Had mine in my 2016 replaced at 59k miles. Those clock springs are trash.

[@cafson4452]

Same