PROJECT ALIENS APC PART 3 ‘BIGGER, BETTER, BRIGHTER?’

PROJECT ALIENS APC PART 3 ‘BIGGER, BETTER, BRIGHTER?’
Welcome to episode 3 in my latest build series. In this episode I get all the part printed for BOTH Aliens APCs and get the finer detail parts completed. You can also check out the massive size of the radio controlled APC.
FIND OUT MORE AT :
Staples and Vine : www.staplesandvine.com/
4D Modelshop : modelshop.co.uk/
ALIENS The Blueprints : amzn.eu/d/iBUjvbg
ALIENS Colonial Marines Technical Manual : amzn.eu/d/fNM2LTD
The Making of ALIENS : amzn.eu/d/flOX45w
ALIENS The Set Photography : amzn.eu/d/d2H6irT
SOCIAL MEDIA :
Facebook : / staplesandvine
Instagram : / staplesandvine
#aliens #apc #alien

[@stevemuzak8526]

One of the best custom miniature vehicles build ever. I’m blown away by this project. Brilliant stuff

[@StaplesandVine]

Thanks Steve that's really kind. Still plenty of oppourtunity to screw it up though... 😁

[@johndaltrocanto]

Highly motivated people are truly capable of anything

[@StaplesandVine]

Thank you, there are still a lot of builds for me out there... 🙂

[@Badassest]

This is by far one of my most favorite vehicles ever! Absolutely wonderful! 🥰

[@StaplesandVine]

Thank you, it's a shame they don't make them this cool anymore. 😎

[@Fury9er]

Another option for the tyres - 3d print a negative mould and use black silicone caulk mixed with cornflour for the rubber. The cornflour makes it set faster and gives it a dark grey rather than pure black colour. I used it to make some tyres for a Tamiya XR311 and they look pretty good.

[@TryptychUK]

Resione make an excellent flexible resin which is great for tyres. It's also paintable.

[@StaplesandVine]

That's kind of what I'm thinking of. The cornflour thing I haven't heard of before - sounds fascinating... 🤔😎

[@StaplesandVine]

I think moulding it in a flexible resin will be the way I go... 🤔

[@TryptychUK]

@@StaplesandVine Just print it. Be sure to have a heater though, it is VERY viscous, so you need it to be about 30C+ and supports need to be heavier because everything flexes as it gets heavier.

[@alexhulea2735]

​@@StaplesandVine I've seen caulk and corn flour used to make phone cases. I'm doubtful about the quality of phone cases, but as RC tyres, it does not sound that bad 😅

[@JohnGunter_Johnprime]

Looks great! Waiting with anticipation for the final reveal!

[@StaplesandVine]

Thank you, me too... 🥴

[@RodShopDodgeColt]

Looks amazing! I had the Hyclon kit years ago but It is long gone now.

[@trennefelt]

You are doing a amazing job with this. Can't wait to see it painted

[@StaplesandVine]

Thank you that's kind. I normally dread painting but it's a walk in the park compared to lighting for me.... 😣

[@clumsydentist5576]

Again, a great episode. Happy to see your channel growing, I remember back when you started the Slave I build and I thought: "This guy needs a lot more views." Your work is realy great, hope you hit the next milestone soon!

[@StaplesandVine]

Thank you, the hard work is paying off. Lots more big builds are planned...🙂

[@Spencer1984]

Brilliant work on this, I love seeing it all come together!

[@StaplesandVine]

Thank you, the end is in sight. I'm looking forward to the big RC version that will be very impressive... 😎

[@radarlovedr]

Bad ass. Looking forward to seeing the interior vid.

[@StaplesandVine]

Thank you. I hope I can do it justice... 🙂

[@anthony566]

I am really looking forward to the files .....I am so building this. You're such an excellent job on this.

[@StaplesandVine]

That's great news, not long now... 🙂

[@andrewwigg8131]

I’ve just picked up the new creality K1 Max… I am totally blown away with both the resolution of the fdm prints and the speed!! It’s a monster at printing large pieces! I can highly recommend it - especially for your larger prints. Maybe include a model that isn’t cut up too much

[@StaplesandVine]

It's a tough one re cutting up prints. Big printers take up a lot of space. I have to strike a balance that covers as many bases as possible.

[@Boarguts69]

The quality of this build rules, great progress! That interior work is so nice 🤌

[@andystewart9405]

Always love when i get the notification for a new video 👌🏻

[@StaplesandVine]

That's great, plenty more videos to come and lots of builds are planned for the future... 😎

[@wombat_models]

Absolutely loving this build. Outstanding!!

[@StaplesandVine]

Thank you, the end is in sight. I'm currently filling and sanding the big one... 🥴

[@tombower450]

This is excellent! You've brought one of the best land based vehicles ever seen in a movie to our modelling world. I'm looking forward to the next installment in the series.

[@StaplesandVine]

Thank you. I hope I can do it justice in the final push. Then it's back to the Milano and then the Dropship. 🙂

[@foabmoab]

Careful with that transaxle 😜 Excellent job ^-^

[@StaplesandVine]

It's OK I'm used to grinding metal... 😁 Thank you 🙂

[@andypodmore6721]

What a stunning model .Can't wait for the next video. After watching your Slave 1 series, I decided I want a resin printer, so I just got the Creality Halot Mage 8K the other day. I'll be purchasing the files soon, as after the Falcon, it's my favourite Star Wars ship. Used to have the toy model when I was a kid.

[@StaplesandVine]

Thank you, It's great you are enjoying my builds. Slave 1 is a bit of a beast. There's lots of Falcons out there but not many Slave 1s. 🙂

[@andypodmore6721]

@StaplesandVine Yeah I've also got the Falcon model from Gambody to print and build. That's a beast of a model too

[@ray24051]

Beautiful job on APC Sera! A friend of mine out of Oregon has been making replacement rubber APC wheels for the old 1/35 Halcyon kit for years. She made a master then casts them out of black urethane rubber and they come out flawless.It's the same kind of urethane people use to make Batman masks.

[@StaplesandVine]

Thank you for the great comment. That's what I'm looking atcfor my tyres too. Being 1/16 they should cast fairly well... here's hoping. 🙂

[@ray24051]

@@StaplesandVine I'm pretty sure that you can pull it off you are a very skilled modeler you know how to make molds and all kinds of modeling techniques.

[@erebus1964]

@@ray24051 In this case, it should even be more elegant, since you can print the molds for casting the tires directly. You do not need to get via a printed tire and manually create molds for it.

[@nigelpearson2937]

You’re going to have to build the Dropship.

[@StaplesandVine]

Absolutely, and in the same scale. It will be about a metre long... 😎

[@nogginthenog2227]

Another awesome Video, thanks for sharing.

[@StaplesandVine]

Thanks, glad you like the build so far. 🙂

[@TheGeezzer]

Well Done! You have done some amazing work there. Great detail.

[@StaplesandVine]

Thank you, that's very kind of you. Plenty more to come... 🙂

[@TheGeezzer]

@@StaplesandVine Nah its alright, I stumbled on your channel after watching some stuff about _Aliens_ You've done a really excellent job with all the detail of the APC. It was a superb Sci-Fi movie and you're doing a part of it some justice right there. keep it up and Do Make The Drop-Ship For It!

[@Biscbob]

Brilliant work!!!

[@StaplesandVine]

Thank you that's very kind. I hope you enjoy the rest of my channel. 🙂

[@rburns8581]

Once again Great work

[@StaplesandVine]

Thank you, the end is in sight now. 🙂

[@anubis0095]

Looks awesome

[@StaplesandVine]

Thank you, hopefully it will look even better once painted and weathered. 🙂

[@marino8034]

Fantastic.

[@StaplesandVine]

Thank you... 🙂

[@svensvensson2724]

I need 1/56 scale though. There's a whole bunch made, but I never bought one. They just aren't right. This looks fantastic.

[@StaplesandVine]

You could easily scale down the files in the slicer software and print it in 1/56. 🙂

[@svensvensson2724]

@@StaplesandVine I would, but it's not always that easy. Parts get too thin to print right. Sometimes making corrections is a huge job. But I would do it for this model.

[@Roosterfox]

Fantastic job I would love to have a go at building this myself

[@StaplesandVine]

Thank you, the files will be available once the build is complete. 🙂

[@nathanial91]

I would recommend getting the tyres mould and cast, there are a lot of rubberised polyurethanes that could work perfectly!

[@StaplesandVine]

Yes, I think that is the process I will use. I've found a good resin and pigments as used by the movie industry. 🙂

[@nathanial91]

@@StaplesandVine I work in the film industry over here as a prop mouldmaker, if you need any help please give me a shout. What material are you thinking of going with?

[@StaplesandVine]

Massive thanks for the offer of help. I'm thinking of 'Polytek Poly PT Flex 85' with black pigment. It is their firmest which I think will work well for the 1/16 tyres.

[@jwood314]

Love this!

[@StaplesandVine]

Thank you... 😁

[@eddietowers5595]

Cast your rubber tires with Smooth-On VytaFlex 60 kit, if it helps.

[@StaplesandVine]

Thanks, I'll certainly check that out. Much appreciated. 🙂

[@apathtrampledbydeer8446]

A real beauty this one, and it's not even painted or weathered yet.

[@StaplesandVine]

There's still plenty of opportunity for me to screw it up... Single colour - how hard can it be? 😕

[@dbenci2071]

Interesting how you managed to get the interior to work, I would think adding drive trane would scale it up, or maybe its electric drive now at each wheel.. like the striker.. good job in making it all fit

[@StaplesandVine]

Yes I think the concept is electric hub motors. 🙂

[@philharris8130]

amazing as usual 🙂

[@StaplesandVine]

Thank you Phil 😎

[@MantisNineNines]

Will certainly purchase both these files and the inevitable dropship once available. I appreciate your precision and attention to detail!

[@StaplesandVine]

Thank you, your support is much appreciated. 🙂

[@MantisNineNines]

You inspired me to finally pull the trigger and get a resin printer. My first goalpost is a 1:24 scale Alpha Fighter from robotech.

[@StaplesandVine]

That's great news. All the best with the printing. I think the Alpha fighter is a great subject to choose. 🙂

[@BigRedUS]

EPIC!

[@StaplesandVine]

THANK YOU 😁

[@danteogilery7948]

Amazing 🎉

[@StaplesandVine]

Thank you. 🙂

[@handznet]

Finally new part 😇👍🏻

[@StaplesandVine]

It has been a while. It is a lot of work but well worth it. 🙂

[@handznet]

@@StaplesandVine yep. Seems like crazy amount of work. I can’t wait for the painting video. And I hope to print and build ot in 1:35 one day👀

[@the-primered-thumb]

Wow mate 😉👌

[@StaplesandVine]

Thanks, I'm looking forward to getting it into paint. The lighting not so much... 😖

[@jasonotoole1822]

Looks Awesome! I would definitely like to buy the files from you once they are ready!

[@StaplesandVine]

That's great news. It shouldn't be too long now. 🙂

[@joginator]

AWESOME

[@StaplesandVine]

Thanks 🤗

[@alanwhitaker3952]

would love to build the 1/24 scale with full interior , you have done a fantastic job....

[@StaplesandVine]

Thank you, it's happening... 🙂

[@mtb0519]

For the tyres on my 1/6th scale scout car I used polyurethane rubber with a shore 30 harness I made a silicone mould for them but a 3d printed mould would work as well

[@StaplesandVine]

Thanks for that, I certainly think polyurethane rubber is the way to go. 🙂

[@rikety46]

OMG! So want

[@StaplesandVine]

The files will be available for you to print at the end of the build. 🙂

[@ddu6043]

Oh my God!!! Fantastic!

[@StaplesandVine]

Thank you... 😁

[@PearlJam2k6]

I have a few ideas, firstly for the screens. Since you'd technically need to get lights in all the marine status screens, look into LED panels so that you can just slide that behind it as a single unit that will light up the entire screen board. Secondly, for the tires i think you should be able to make a mold by using the tire file and reversing it to then just casting the tire in black silicone so it has that "sticky" rubber feeling to it. Cant wait to see the next one, this beast is gorgeous and as a builder myself im blown away but the amount of detail and smart work you're putting into this tribute to one of the best vehicle designs ever made.

[@StaplesandVine]

Yes I had looked into the one big screen idea. It would liook great but I have near zero depth to play with and in 1/24 scale there is little room for manoeuvre. I think re the tyres casting in soft rubber will be the route I first go down. I think we will all learn a lot from the final result. 🙂

[@PearlJam2k6]

@@StaplesandVine I was thinking about the depth as well, i guess the other alternative would be light filament noodles, or maybe LED strips (they're about the size of the screens too) but im worried the strips might be WAY too bright however. Best of luck sir, we're all eagerly awaiting the next step.

[@stevoc9930]

Soaking the parts in warm water can reduce the marks left by the supports on removal.

[@StaplesandVine]

Thanks, I'll certainly try that. 🙂

[@TryptychUK]

It seems you are having hassles removing the supports. I remove all mine after washing, but before curing, when the resin is still soft. It makes life a lot easier.

[@StaplesandVine]

Yes, I normally do as you do but filming stuff for KZbin tends to dictate when I can get to the prints. 🥴 Sometimes the prints sit around for a few days and naturally post cure.

[@PrimalAttitudeArvy]

To bad that most detail will not be clearly visible since it’s on the inside. I can only imagine if this model was designed with full access and posable figures, like what Teccotoys is doing. But still amazing to see this model coming together, great job so far!! 😄👍

[@StaplesandVine]

Thank you, a cutaway would certainly be an interesting model if someone took it on.

[@hankkaufman1900]

You should make a 1/12 scale one for G.I.Joe Classifieds

[@StaplesandVine]

That is a good idea but the beauty of 3D printing is the files can be printed in any scale.

[@ravenslament622]

I'm amazed at the level of detail you are able to achieve within your builds, sadly I'm not in a position where I could proudly own such a wonderful piece of movie history but I can at least view it on your channel. Ps how is the ship from guardians of the galaxy progressing?

[@StaplesandVine]

Thanks so glad you like my builds, they are a lot of work... 🥴 The Milano is a real challenge as there is so little solid information on it. That's why I needed a break it was frying my brain. Once the APC is done I'll be back on it. 🙂

[@nzavon]

Nice, you could print the types in TPU, prints pretty well. To see the interior once it's all finished, is the top able to come off so people can marvel at the interior detail?

[@StaplesandVine]

Thanks, I'll certainly take a look at TPU, not tried that before. No the top won't be removable. Overall accuracy must come first. 🙂

[@aaronm1855]

Amazing project! I'm looking forward to purchasing the files for a build of my own! Is it possible to mold the tires from the resin negatives? There are moldable plastics with a black/grey hue that may serve you well. I believe it's called thermoplast. Can't wait for the final product, sir!! Keep up the great work!

[@StaplesandVine]

Glad you like my build, that's great news. I am certainly looking at moulding and casting the tyres. Make sure you are subscribed to see how I get on in the next episodes. 🙂

[@joginator]

For the Rubber-Tires u could print them as a Mould and use a Urethan that cures soft!

[@StaplesandVine]

That is actually a really good idea, certainly not a method I had thought of..... 😎🤔

[@joginator]

@@StaplesandVine Check out videos on how Real big Tyres are made! It should give u an Idea on how to design the Mould. I wouldnt recomment a One Piece Mould, because the Tyre has many Undercuts due to the Grooves.

[@MrPhoenix1905]

Hey, once again an excellent job!!! When do you think the files will be available? Definitely want it :)

[@StaplesandVine]

Thanks, glad you like the build. I'm currently painting the 1/24. Lighting was a hold up and pinning down the colour was tricky but I think I've sorted that now. Also building up the 1/16 RC version (chassis complete, body assembled, everything printed). The files should be available before Romulus. 🙂

[@You068]

WOW...

[@StaplesandVine]

Thank you. 🙂

[@krownneghas8623]

Hope somebody will make this in 1:6 scale :)

[@StaplesandVine]

I would love to see that. It would be HUGE.... 😮

[@MangaMan108]

Amazing! Where can i get these files? Always wanted one of these in 1/12 scale.

[@StaplesandVine]

The files will be available through my website when the build is finished. There's a link in the description. 🙂

[@jeffholt9437]

Only one question at this stage - will this affect the the value of my unbuilt Halcyon APC kit? 😊😊😊 Looking forward to the next episode ....

[@StaplesandVine]

Hopefully it will raise the profile of your Halcyon APC and make it more valuable... 😁

[@jeffholt9437]

@@StaplesandVine A great politician as well as a design and modelling wizard!

[@StaplesandVine]

@@jeffholt9437 I can't be a politician... I actually answered a question.😁

[@FredrickLeicht]

What risen are you using? I have noticed that a lot of my goto resins are turning out super brittle something I have never experienced before.

[@StaplesandVine]

I just use the standard Anycubic basic resin. Most seem to be brittle in thin sections. The Anycubic seems pretty good but can chip.

[@FredrickLeicht]

@@StaplesandVine I have switched to ANYCUBIC Tough Resin 2.0 I have had great results, for your tires I would use Siraya Tech Tenacious. this guys does a great job of breaking down what is the best. kzbin.info/www/bejne/faLFkGB_frOSd68

[@johntreloar8203]

Looks great, do you know what the price will be? for both scales.

[@StaplesandVine]

No idea on price. The files will be sold as one complete set which will include both scales as I think many who build the 1/24 may want to have a go at the 1/16 as well later. 🙂

[@johntreloar8203]

@@StaplesandVine I've also got to pay postage to Australia...😳

[@StaplesandVine]

I only sell the files not the 3D prints although I may have someone who will be able to supply you. 🤔

[@johntreloar8203]

@@StaplesandVine Yes I don't own a 3d printer atm but will be buying 1 later, will still purchase the files, if you know of someone who can print the files that would be great.

[@Firebreakerhayes6904]

For the wheel why not try to do a part molding them in silicon

[@StaplesandVine]

That is kind of the route I am going down. Hopefully some results in the next video. 🙂

[@Firebreakerhayes6904]

@@StaplesandVine can't wait 👍

[@dangermaus9253]

Why don't you just print the tyres in flexible resin/tpu?

[@StaplesandVine]

It is an idea but print quality, material cost, and print failure rate make moulding and casting a far better option.... Have you ever tried to get a rough rubber surface smooth?

[@dangermaus9253]

@@StaplesandVine I've printed plenty of wheels in flexible (rubberised) resin that needed no more cleanup than any other resin print. Printing quality isn't an issue, material costs aren't much more than abs-like resins.

[@StaplesandVine]

I'll certainly take a look. Can you recommend a good resin? it will be fascinating to do a comparison. 🤔😎

[@dangermaus9253]

Currently using Siraya tech tenacious flex. Fx60 is OK, liqcreate flexible-x is great but more expensive

[@dangermaus9253]

Flexible-X is by far the most rubber-like, it's quite elastic as well.