A walk around the Rx7 and everything that has been done. A few lessons that I learned along the way.
Пікірлер: 20
@swervyslav9 жыл бұрын
if your concerned about safety you could also relocate the clutch interlock switch which prevents the starter from turning the engine over unless the clutch is depressed. you dont even have to rewire the switch, theres enough length in the stock wiring to glue it under the dash where its in reach and out of sight!
@noocann8 жыл бұрын
PLEASE replace your radiator. Yours looks original, and the cars are getting almost 30 years now. The plastic end tanks tend to let go with very little warning. You don't want to be caught driving around when it fails. Aftermarket radiators should be a must for those running original rads. These cars need all the help they can get in terms of cooling. Koyo makes a very nice drop-in replacement for the money. 5-beeps on steering wheel replacement means you did not engage the turn signal cancel ring properly. There are two position "dowels" that should fit into holes in your hub adapter! If your hub adapter does not have these holes, get a better one!
@JM86868 жыл бұрын
Welcome to cali!!I just fixed my s4 after a lovely pulsation damper failure lol had to rewire the whole engine harness 😠
@davidgirod66849 жыл бұрын
yea a fuel pump switch for car safty.... and flooding lets not sugar coat it. do yourself a fav. and put a ground strap kit (like 5or6 8guage wires from battery to body and motor. ) the fc and fd both need this really.
@Petrol3608 жыл бұрын
+David Girod Adding more grounds is always a good idea for almost any motor! The older WRX's will have a noticeably smother idle with a few ground wires. You would think the OEM would catch on.
@aesopm92008 жыл бұрын
You should fabricate a rear diffuser since (1) you want a skid plate for your fuel cell anyway and (2) you already know how they work!
@Petrol3608 жыл бұрын
+aesop m Love to see someone build one for an FC!
@jamesarmstrong55938 жыл бұрын
you gotta make this thing a track day car!
@invinciblejets46908 жыл бұрын
Yup my drivers seat was rusted on had to cut all the bolts what a pain....
@erik_cruz9 жыл бұрын
Nice project! Are you planning to upgrade the ECU and turbo in the future?
@RotaryRebuilder9 жыл бұрын
Erik Cruz already have the HKS F-CON piggyback ready to install
@katanamast2798 жыл бұрын
+GraysGarage Please give me your car. Its Awesome! Lol. Loving the build
@recheveste318 жыл бұрын
Are you in CA, Gray ?
@22bjonah9 жыл бұрын
no start up? :(
@abcdefghijklmn15159 жыл бұрын
Hey Gray I was wondering if you had any info on improving aerodynamics, specifically on an AW11 MR2.
@RotaryRebuilder9 жыл бұрын
Oneof_thosepeople www.graysgarage.ca its right there on the front page