Project Seat Time 350z EP.2 Seat and Steering Wheel

Today I install and talk about a couple of the most important mods you can do to ANY track car.
www.dndperform...
Get Your Very Own Taylor Drifts Merch! www.taylordrifts.com
Thanks to all who support me on Patreon! - www.patreon.co...
FOLLOW ME ON INSTAGRAM
ME - / taylordrifts
ALSO ON TWITTER / taylordrifts
Snapchat: taylorsaysdrift
Background Music by Chillhop Music
/ chillhopdotcom
Artist - L'indecis Song- Happy Hours : / lindecis
Let me know what you thought of this video!

[@Ratbagsocialist]

i only trust the installs that use the parked car and pretend to drive (with noises) demonstration method

[@EliteSniperTV]

Schwaglet always

[@Billy-rz1jg]

Z's are also cheap and are gaining aftermarket support more and more.

[@aria8928]

Taylor Ray is hotboi goals. Definitely a good call working on the car's ergonomics, it makes such a difference actually being comfy while driving.

[@ExhaustedOfficial]

I’ve always got time for Taylor’s videos even when in just about to go to sleep💪🏻 best automotive youtuber 👌🏻

[@bensneathen2975]

Exhausted honestly tho

[@Garageless]

His edits are awesome... lots of extra clips which take a lot of time...

[@bensneathen2975]

Garageless true, I've just always liked his videos

[@Garageless]

Send It Society one day ill be on his level... but prob not lol

[@DavidAutoworks]

subbed help you get that much closer

[@JBGoodnuf]

if your not doing anything with the cruise control switches on that wheel I will buy them off you and pay for shipping up to alberta canada, I've been looking for some for a while.

[@cameronbuchanan1996]

JBGoodnuf liked so he'll see good luck brother✊

[@timhahn6643]

So cool when you started making the car noises when everything was done. It really shows what passion can do for someone truly inspiring

[@slavivlaev]

I love the editing, the background music and the effort you put into those videos! Masterpiece! Keep up the good work!

[@thatsubieguy2233]

Thanks for the motivation Taylor! I need to chance my front wheel bearing the second time this year and on top of that, I need to swap my front rotors and pads. The brakes aren't bad but I hate the bearing install because it is the pressable type lol

[@timholubowitch9097]

I have the same wheel with purple and the purple hub with there tall race shifter. In my spec v (that's about to get vq35 swapped). But I'm a big fan of dnd.

[@thomasbartholomew4993]

Your videos will always put me in a good mood! Love you work and I always watch you while I do homework. Thanks bro, keep it up.

[@urgeandfuria4chau]

I`m so hyped on this car :) worth puttin of the Miata for al litle while. Just one litle thing, the smal text comment popup thingis are a litle short so i have to rewind and pause it. English isn`t my first language, but i understand that you don`t want them up there for ever eather. Keep it up, can`t wait to see this thing in action :)

[@harryelmes9345]

Flip the quick release around make it easer on urself. Gold part on the steering wheel

[@deletedmediatj]

pretty dam sure he did install it.. backwards hahahahah

[@Lowcoupe]

Infamous Drift Team DND ones D ont work like that with NRG hubs

[@Zainathan]

excited to see this build evolve, always wanted to grab a 350z for this reason in particular

[@SEEUENTEE]

I was having a shit day got sent home early because there wasn't enough work to go around seen Taylor uploaded currently chill lol

[@C7BIKERBOYZ]

Oh man I got excited when he was trying his gloves! And testing everything makin car sounds 😂😂 good job brother well deserved 🙏🏽

[@jblazeya2]

Liked the intro your edits are dope. I'm still saving to racecar my interior. thanks for the motivation.

[@epaul88]

Ahhhh man I'm speechless, can't wait for more videos on the 350z!

[@alex92173]

It’s 6:30 am and I’ve done nothing but watch your videos all night long

[@willyfudgeface]

You had me at the Milwaukee tool poster. subscribed.

[@chrisfran3469]

hey mang, you've inspired me to start my own youtube channel and get into drifting. its definately not gonna be easy to get seat time here in vancouver though theres not many tracks round here.. that and i need to buy a beater car to learn how to drift lol anyway love the content definately one of my favourite youtubers

[@Jakekola]

How have I not heard of DND before? If the quality is as good as you say it is, their stuff is amazing value for money. They also have a 15% off sale going on right now. Thanks Taylor!

[@bradleyp2040]

I could not agree more with the upgrades and, how truely valuable they are. While this may be a different application but, a lot of the reasons the "luxury" cars have bigger price tags is that they upgrade the driver's/passenger's "points of contact" with the vehicle which changes the experience of the drive. Not a perfect example but, think of the g35s and the maximas or others. Anyhow, awesome video Taylor!

[@1clnsdime1]

Finally a drifter that don't put the wheel 3 feet from him. Cockpit looks well fitted for you in this car.

[@MafiaMotorsport]

I am 99.99999% certain you installed the quick release backwards lol. I havent finished the vid, so I hope you notice it haha. The gold goes on the steering wheel so you can comfortably pull the tab with the wheel. And it will look better haha. You even had it right erarlier in the vid when you put it up to the wheel.

[@henrymccormick4975]

Can’t get any better! Can’t wait to see some seat time in this

[@silentpowerYT]

arent you suppose to have have the gold part of the quick release on the wheel so pull the ring to unlock towards you

[@blindabinda1234]

silentpower you can obviously do it either way but the way you said is how it's usually done

[@israel13g]

He put it on backwards because it didn’t fit the other way. The bump hit the steering column bolt. Because he has a short hub

[@321bmxallday]

Israel Guzman good try but nope he had it backwards I have the NRg short hub with the same quick release and it fits fine on my 350z lol

[@israel13g]

Well on my 240 it didn’t fit with the short hub and that same spline quick release. So I had to run it backwards with the hump where the horn button would go

[@321bmxallday]

Israel Guzman haha true, as long as it works who cares lol

[@antoniollove]

patreon for the W

[@1996FordBronco]

Antonio Lloveras hey good shit man

[@dogeracer862]

Frickin heck that tap at the ending!

[@jordy0208]

Good video! Like the matching parts

[@DeeZeeGR]

Stocked on the Z!!Haha them noises in the car that's how everyone is!!😛You should paint the fenders!!

[@VindicatorFFXI]

House party in the house....Taylor working in garage always

[@dylanbusby-carver3787]

Soo close to 300k subs taylor!!

[@PseudoReality28]

Points of contact always make the most difference, tires included.

[@rsadz2358]

coming on well taylor hope.you keep this be brilliant for your fleet

[@SimpsonsClassics]

OMG i have been searching for a Bride seat for ages for one of our project cars.

[@RobSeymourbikes]

I think the word you're thinking of is cockpit. Refers to most things that people touch... ie bmx (bars. grips, seat) etc etc Sick vid though, can't wait to see you kill it in this!

[@CRFHONDARIDER100]

I love the noises of drifting

[@kennysoares8805]

car looks sick already!! keep up the good work

[@Bbeavis]

The 350's are starting to give off that cool cheap track toy kind of vibe.

[@skidzgonemad620]

Did anyone else with a Z cringe when he pulled the shift knob off? Love your videos Taylor, just a bit of a hammer moment there lmao.

[@RyanNoonanRacing]

Loving the fact your repping Because Daddys seat time over everything sweatshirt

[@thebmwlifestyle2184]

And bye bye steering angle sensor. Although I guess if the clock spring/contact reel isn't attached to the hub it shouldn't spin and break the ribbon in the reel since you turned it independent of the wheels 😂🤣 seen so many tech's break the ribbon doing that and loosing steering wheels controls 😂🤣 awesome video keep up the awesome work!

[@Likethetacosauce]

Killin 2 birds with 1 stone, working out and watching Taylor Ray. Good end to a rainy day.

[@Solucerus]

don't you want to set your seat up so your clutch leg doesn't snap from a straight leg in a crash? Been watching for awhile now, love the content can't wait for ep. 3!

[@adamrath3755]

Taylor u should make door cards it would look awesome

[@levismith1049]

Awesome video, you should make jet tags like the one on your keys but with your logo.

[@grocer3]

The Garagestar seat rails for the Miata are the bees knees. They fit my status seats perfectly. For sure get them.

[@Taylordrifts]

My friend has them in his car, and I feel like his seats aren't low at all

[@JakeyyFTW]

All about premium points of contact!

[@blackmkiv]

It always surprises me that some organizations allow harnesses in cars without at least a roll bar. Around here you're required to run a harness and rollbar if you move to a bucket, and you're required to run a proper seat and rollbar if you have harnesses, with HANS highly encouraged.

[@davisspeedshop2031]

DND makes quality products. I have one of their wheels in my 1996 Jeep Cherokee.

[@Whiskeythrottle_69]

Taylor I run a fab shop id like to talk to you about a possible sponsorship, if you're interested let me know.

[@newtc]

DND is good stuff. Awesome vid man.

[@FeelTheDern]

That LZBMX beanie reminded me that you haven't uploaded a vid of you riding with Adam in a while. Would be cool to see!

[@1996FordBronco]

Really liking this build 👍

[@dakotagladden3070]

22:00 I see you use knipex pliers they are my favorite pliers I keep a small pair in my pocket at all times

[@thedevilspianist6543]

Love the long videos!, keep it up!

[@davesracingchannel9261]

Tobii the divine would you Please give my racing channel a Subsribe I have plenty of videos for you to enjoy

[@Lukas-eg1rs]

Taylor, flock the dash, clean it, and some new front fenders

[@jspeedracing]

Great vid man!

[@ES-qh5de]

Hey Taylor, was the pop the trunk a reference to Yelawolf. Or do you know it from somewhere else. Btw keep up the awesome videos. Looking forward to ep3.

[@dmasterson12]

Fun fact about those tamper proof steering wheel bolts, I've taken them out multiple time with a flat head screw driver.

[@kennymctyson]

Front wheels look sick , can u find a matching set for the rears

[@cjbebesin6185]

Great vid taylor keep up the great work brother 👍🔥

[@soleilpitcher6972]

ooooooooooooooo new gloves! said only me. pls red white and black 350 theme paint eventually. no rush!

[@joeybillz]

Post video Taylor is my favorite Taylor

[@toxicmongoose7061]

buddy club rails their "low mount" in 240s at least is HIGHER than the stock rails.. I hated them and couldnt use them

[@BeMad4M3XD]

surprisingly barely anybody has torx bit, i actually had to go out and by a ratcheting screwdriver set with torx bits for work

[@joshphillips9871]

The harness with match the fire extinguisher. Because that what it will match......... and possibly the wheel.

[@jamessmith8284]

cut out the floor bumps on the miata and fab mounts to the floor! thats what im doing since im so tall but im gonna just flatten my garage star rails

[@robertjackman4289]

Taylor and adam are my favorite ;3

[@asswhooper54]

put the Ls in the 350z and the VQ in the mx-5

[@ATLASGAMINGApallo]

nelson rodriguez Nani

[@runf201]

Is called project seat time... He’s just doing the things necessary, vq is enough for just seat time

[@tkuenzli1]

Best in the garage drifting ever! 😹

[@CraftingDomain]

If you ever repaint the miata... you should attempt a wrinkle red finish... that would be cool

[@noahtidball7689]

Red Steering wheel with a gold quick-release looks like you going with a McDonald's style build 😂😂

[@Sasquatchadventures1]

Taylor why didn't you put the gold hub part on the wheel side. The spline shafts is usually on the column side

[@cf.5093]

I know it’s a simple seat time and a drift missile but I hope it becomes a really clean looking drift car

[@kendallwilliams9808]

I can see it now. He wanted to keep the vette nice so he thrashed the miata, he wanted to keep the miata nice, so he got the 350 to thrash. Eventually he'll buy something else to thrash so he can keep the 350 nice. With this progression he will have every drift car avalable and have no one to tandem with.

[@nunocosta5006]

EP.3 tyler painting the car in red

[@deangelolawson6184]

Damn early again...lol ...love the videos my dude keep em up

[@sandylancaster5901]

sweet upgrades

[@hell415razor]

“IT DONT MATTER IF IT GOES IN NORMAL OR CROSS THREADED, TIGHT IS TIGHT”😂

[@meffycodrin1853]

"I strip everything" - Me gustaaaa

[@darthvaper2417]

those shoes are sick

[@simonrosen3972]

pls do something about the fenders :/ the car would look so much better! :D

[@DamonBMW]

Simon Rosén its a driftcar its gonna get smashed up no point fixing it

[@simonrosen3972]

Special yeah i know but it sticks out like a soare thumb :/

[@DamonBMW]

youre right but yeah better to use the money fixing that on tires or something

[@nana-nk1pv]

at least they match, haha

[@Jimexter]

do you daily carry that milwaukee knife in your back pocket or just use it around the garage?

[@VindicatorFFXI]

LoL the wall tap at the end

[@WackZest]

Is this video sped up or is Taylor ray riding the great white pony?

[@UncleDale_]

Long detailed videos are bae

[@jordy0208]

Isn’t the quick release on the wrong way round? Thought the gold part attaches to the steering wheel so you pull the release towards you

[@redstickrobb624]

Should use suede gloves with a suede steering wheel. It wont damage the suede and you'll get good grip.

[@vagobla5228]

You just need the crown royal shift boot up grade !!

[@mrkouki180sx]

DnD stuff comes from aliexpress and they just have there logo put on and put in branded boxes

[@aaroncunningham8738]

If the steering wheels hold up why don't you buy one to take out to Japan with you for your jzx? To replace the one you dislike

[@braydenjesse7705]

When you watch the last episode and then as soon as it finishes this comes out

[@Garageless]

You got my dream seat!

[@LittleMac938]

Press F to pay respect to Taylors broken belt loop.

[@DashhCams]

We need some drift footage!!

[@natemurphy2830]

Hey man grate video! But you put the quick release on the wrong way lol not hateing just pointing it out.

[@mentalxdolphin]

Maybe call it the project Zeat time?

[@EliteSniperTV]

mentalxdolphin kill me

[@meffycodrin1853]

a little corny dont you think?

[@EliteSniperTV]

codrin stefan not until he goes e85

[@CJdriftZ]

Yay another Video!

[@tomashlavna]

nice shirt man

[@JamesDownes]

Bring Back Tool Time #BBTT