"Project ZUPRA" Part 17 | FULLY SHAVED Engine Bay | 2JZ Z32 Build

[@KalvinMalli]

Can I get a thumbs up for loosing my fingerprints due to so much sanding 😅😂 See you tomorrow😎🤙🏼

[@A_T88]

Merch. It’s hoodie season. If you could do the Z on a hoodie or something like that would be pretty cool I think

[@trentonbriones2381]

This is what I like to see Kalvin proper and done right this is why I like this channel

[@firstnamelastname1346]

i dont understand how you dont have more views on your videos. you post some of the most interesting car videos on youtube.

[@SlingSalsa]

DUDE!!!!! Those 5-spokes on that kit in like a bmw arctic white with light amount of fine red and more white pearl would be freaking hot immortality

[@themsfarmdude8201]

You should put rubber gromets where the brake lines go through the fender 👌👌👌 would look real nice.

[@rayfrmklz]

If you’re going to do merch do hoodies or jean jackets, the cold is coming in fast

[@esotericthegoat8175]

I just had surgery and the first thing i watch since then 😁

[@filipnine]

You can only do so much sanding on clean bay, let’s get some high fill primer on that baby then you can see what needs to be hit with sanding so your fingers don’t fall off, dope build!

[@nathang.6593]

Yes to that wide body looks insane, for merch keep it simple... tees or long sleeves with simply Kalvins Garage on them or a sketch or nice shot of either of your cars when finished. Making some sweet moves out here my guy keep it going strong with these daily vids :))))

[@HeartLessGem_]

Vszf's 100% plus is summer over here in Australia! So if you could bring out a tank top or something like a black tank top with the little Z on the top right/left of the top that would be dope Kalvin!

[@joshskates15]

Would love to see a shirt with Kalvin’s Garage in the front and in the back either Jz vs Rb Power. Or a pic of the z32 or of the 240sx.

[@milladon8764]

The vsxxs is the way to go fam

[@sparxbettinelli1234]

That widebody is amazing 😍

[@YoBoyNero]

I'll be old and flimsy by the time Kalvin finishes prepping the engine bay to spray the first coat of primer 😂😂😂 keep up the great work kalvin 🔥💯👍

[@medievalpossum6504]

IMO the third wheel looks the best.

[@Z32orDIe]

Been there a few times now. Def worth all the effort in the end! Very rewarding.

[@modifiedz1]

Kalvins the shit! Truly enjoy your channel.

[@RelentlessPerfection]

That kit is freaking CLEANNNN

[@foxumall6542]

It's coming together now Kalvin it's looking good 👍

[@milladon8764]

Your grinding hard bro I appreciate the content

[@qwnc_]

widebody choice is so fresh. the z is a pretty wide issh looking car as is, so subtle look is niceee, also merch yesssss, keen dude, pls have worldwide shipping available 😁 maybe like keychain/sticker of your jz and rb? kinda your signature thinggg 👌 keep up the content brother ill keep up the vviews and likes for ya!

[@carguyslifestyle8578]

Bro that's already starting to looking clean as F*** lol keep up the good work can't wait until I see it finish and make it into SEMA next year.

[@dustinfoote4253]

*Air hammer* dadadada. In the words of Chris Foresburg, "this is an air hammer, it gets shit done" lol

[@HenryJp510]

We got to finish this before then end of the month. More content kalvin

[@bosledge6671]

I'm picking my engine up today thanks for the continuous content KG

[@s15importFan]

You guys think Kalvin will finish the engine bay before “part 100”?

[@Limpancool1]

probably not dood

[@rayfrmklz]

Lol

[@williambackman6691]

Debatable

[@carguyslifestyle8578]

I rather see him do the engine bay through Video 101 and get it right then make him rush it and miss a lot of important things small details can make a lot of difference everyone who actually build a car knows exactly what I'm saying

[@rayfrmklz]

T-Vick Productions yeah a immaculate engine bay is not necessary and will not make or break the car. You wont see 80% of it when the engine is actually in. Its all for self satisfaction. He could have been primered and painted it and it would still have turned out super clean.

[@laxzac88]

It’s about to be winter. Beanies? Dad hats always do well. Could do like “2JZ32” hats or something

[@doug774]

Do it Kalvin. TWIN Z is timeless

[@BBBoiko2004]

Watching and thinking... God Damn that is so much work... I have to pay someone do it on my car, because i will go crazy to do it

[@alwaysplayingtooloudjacob209]

Full send on the engine bay looks awesome

[@G2GBuilds]

2jz z32 poster coming soon.. 🤙 What wheels specs are you planning on getting? 18x10?

[@nyckaguirre1034]

Long sleeve t shirt. Maybe some cool JZ/Z32 design with 90’s HKS colors

[@TruZule_]

Sanding montage FTW!!! Keep up the killer work!

[@devinnewton3634]

Also you should use the hole under the headlights, make custom headlights where the piping replaces the low beams but you could also get come really gnarly led fog lights and install them into the bumper. Kinda like the lights under the headlights in a rocket bunny kit, let's say on a 350z

[@kissmyshaq7899]

Can wait for the finish of this build! Love it!!

[@chrisherbert5052]

Put a weld rts and a sticky Mickey and save the money on hot boy wheels for a built head

[@A_T88]

Notification squad!! So hyped. Dude you’re making so much progress with the build. Keep up that hard work. It’s going to be insane when finished

[@bimmeraddiction447]

Andre Taylor Hey man could u like my Toyota Supra video and give some tips

[@KalvinMalli]

Bro please stop spamming, I already told you yesterday lol.

[@bimmeraddiction447]

Kalvins Garage sorry bro I don’t no what I’m doing just want to be famous😂 I will stop now

[@300zx-jdmjdm8]

Yea wide body is nice your se is going to look sick..!!!👌👌

[@Dreezy2tone]

First set of wheels for sure

[@jblazeya2]

dope edits of welding.

[@turboflacko946]

Always good man see ya on the bext one

[@joeystrunk4413]

I used hockey pucks for my motor mounts on the jz

[@jamesowens1545]

I’ve been wishing for merch for months

[@RalliartRsX]

Cool vids! Are you accounting for engine torquing for fitment of the heater lines, etc??

[@starrautomotive4467]

please fill in the hols on the core support! !!!!!!!! BTW love the build

[@Slowwasian]

Bro if you do a sick Z32 with an open engine bay with the JZ in it for the merch I would buy it up!!

[@carguyslifestyle8578]

Same here

[@Maroco918]

Keep grinding homie. You rock

[@300zx-jdmjdm8]

Kalvin what harness you going to use ?

[@InnerCityGarage]

Oreos on the front z on the back hoodie bro 👌

[@PsBuddha562]

One man team! I am the same.. idk if that’s a good thing or sad haha

[@BCs300z]

Kalvin, There should be two holes on the driver side - one for brake line and the other for ABS - and one hole on the passenger side - for ABS - left open. Looks like you patched the driver ABS hole shut

[@KalvinMalli]

Who needs abs.

[@BCs300z]

haha. chicks dig abs!

[@Joshua.86]

Like for the VSXS😍😍😍

[@SavageInstinct1180]

For Merch I’d recommend covering a few different price points. Ya know like shirts for the higher end and posters/keychains on the lower end. Just my .02 cents. Keep grinding dude.

[@rickygreene3205]

Sick bro keep up the good work man 👍👍👍👍👍👍👍👍👍👍

[@moisesalcala7450]

I’m down for the widebody. Surely

[@stereofielectronics9333]

That tool you speak of is an air hammer

[@SendingStache]

killing it bro

[@guildensteinfoutch6232]

Second photo of wheels for sure.

[@TheGamerTechChannel]

What's the name of the song on the sanding and welding part of the video? It isn't any of the songs in the description. Thanks!

[@davidwarden6011]

You should do some Z shirts, but also a more generic shirt with a KZbin logo and your channel name. Some guys may not have a Nissan, but appreciate your work and channel. Just an idea to cater to the masses.

[@jboughts]

🙌🙌🙌that shoutout

[@davidwarden6011]

Threw that thumbs up!

[@mamamorgan8609]

Hey Kalvin! Dont forget to RTV the pickup tube ;) ;)

[@mustafafareed6714]

whats type of willding machine its flux core or arcon gas

[@alfonsosarabia4505]

Will perform fellae for 2j

[@moisesalcala7450]

Coming out MINT❤️

[@viggolorenzodevries2531]

You should do some casual shirts or hoodie which you can wear daily

[@kidbeatzzz9290]

i would love to buy a shirt with the 300zx front and back!

[@time_zones4136]

Keep it up!!!

[@aeok18109]

VS-ZF would be fucking DOPE on this shell

[@dre232]

Dong it right Kalvin. Looking good :)

[@C.JPhotography]

Yes make some merch

[@jacob7342]

0:14 same

[@dinokadribasic9192]

Kalvin check your PO Box in the coming days. I sent you something. Should be there next week.

[@Z32orDIe]

Dopeness!

[@BowedUp]

Is that a SUPRAAAA

[@krazyd27]

You never posted the link to your welding machine. You said you were going to include it in the previous video but didnt.

[@skulledmonte84]

All the holes in the top of the core support tho

[@KalvinMalli]

So reading your comment made me fill them up 😂😂😎

[@harrysearle2765]

1jz Subaru Legacy Wagon build?

[@Dreezy2tone]

A simple rb t shirt bro! I got a 25 so do something for the rb fam

[@Colin711f2]

Jet tags!!!!

[@frankiebadoff7688]

It almost looks like a supra in front of the body kit o.o

[@mrcherry4687]

Why dont u just cut it out and make a new plate bent in so u have atleast 2 inches of clearence in the rear 🤔

[@eazye4208]

5:45 had me laughin

[@Mexirican16]

Merch with the 240 on its oreos!

[@ianmathiesen2416]

Dude please reinforce the crossmember a little more, your putting more power in the car it just makes me sketch out

[@KalvinMalli]

I understand your worry man. But this is very common. I’ll make something once the engine is in to make it stronger though 💪🏼

[@ianmathiesen2416]

@@KalvinMalli sounds good man great job on the build

[@seikoja]

Kg mafia merch

[@TheGoofyKid157]

Merch of the s13

[@sethdressing]

Key chain & lanyards

[@tylermarini9683]

5:34

[@garyvang6856]

Kg!!!

[@milladon8764]

5:47 😂😂

[@seikoja]

Yo boss i see u dont check ur dms on ig so whats a good way to reach out to u if i have an idea that u might want to keep secret from channel untill u are ready to reveal?

[@KalvinMalli]

Email is the best way. I answer some dms. But can’t get them all.

[@seikoja]

@@KalvinMalli ok boss just sent u an email under the subject z merch

[@devinnewton3634]

On the merch note. Can you do some joggers?

[@imSchwaggy]

get/make an engine damper.

[@GunzCarz_GamezYT]

No wide body please kalvin

[@bryanmartinez4718]

Sweaters!!!!

[@georgealtezza5235]

Pls don't cut into this beauty

[@shawnsmoker5581]

I do screen printing. Hit me up if you need a good price on shirts/hoodies!