Best Mechanics Tool Set? Let’s Find Out!

[@ProjectFarm]

Here’s the list of products reviewed. More details in the video description. Thank you! Tool Box Sets: GearWrench: amzn.to/3MUe0cQ Starwork: amzn.to/40O0wVQ Craftsman: amzn.to/3ut7Gmt Crescent: amzn.to/40Rqlob DeWalt: amzn.to/3MS3suI Pittsburgh: amzn.to/3sAbDoU and available at Harbor Freight Husky: Available at Home Depot Kobalt: Available at Lowes Supplemental Tools to Complete Your Tool Kit: GearWrench Tool Box: amzn.to/3R8dj2e Combination Wrench Set: amzn.to/3FSoDcg Adjustable Wrench: amzn.to/3stiznv Wire Cutters: amzn.to/4778T0Y Needle Nose Pliers: amzn.to/3SyXWB9 Slotted and Phillips Screwdrivers: amzn.to/3FQ90Cj SAE and Metric Hex Key Set: amzn.to/3Qx1p0r Universal Joint, Adapter, Extension Set: amzn.to/3SHNMOB Electrical Tape: amzn.to/3svaY7Z Razor Blade or Knife: amzn.to/478ILDc Water Pump Pliers: amzn.to/473U7rL Extra Tool Box for Extra Tools: amzn.to/3MBfoks Telescopic Magnet: amzn.to/4755Rul Hose Clamps: amzn.to/3svaVcj Locking Pliers: amzn.to/3u8xDaK JB Weld Quick Epoxy: amzn.to/47unVhj Baling Wire (not tested): amzn.to/3QqYuWW Duct Tape: amzn.to/47rXFUy Hex Key Set: amzn.to/3upieTs Jump Starter & Tire Inflator: amzn.to/3SvfbTT

[@buckstopshere7305]

@@Stress311cousin Eddie agrees with you

[@larrymayfield6665]

I know it not in a tool box but harbor freight Quinn 428 mechanic set is most complete set

[@RitzWood32]

Respect to this guy for not having sponsors. Makes everything much more honest. Keep up the great work PF!

[@ProjectFarm]

Thanks, will do!

[@hiiipowerbass2337]

​@@ProjectFarm how is it all funded??

[@troy2000me]

@@hiiipowerbass2337 I would guess KZbin revenue. He has 3 million subscribers now.

[@iamgermane]

@@ProjectFarm Where is the review of both corded and cordless heat guns?

[@seansullivan4537]

​@@hiiipowerbass2337KZbin ads.

[@PickUps]

i love the fact you are just a youtuber. You have never asked me for money, youhave never told me your political beliefs, you have never taken any money. You just make videos. Cheers

[@ProjectFarm]

Thanks!

[@Solcres_Joa]

Very true. That's very commendable ✊️😎

[@Wal-xq8bc]

Yes I agree, I’ve seen a lot KZbinrs or “influencer’s” drift into political or religious commentary or even drama bait. But project farm is like an old neighbour that check in and nothings changed and I love it.

[@Turco949]

Even though it is fair to assume his revenue from YT is more than satisfactory, it is still commendable that he hasn't resort to any side tactics or started adding "fluff" to this videos.

[@PickUps]

@@Turco949 he makes a substantial revenue. Id argue well over 200k a year based on his views. Im arguing that he hsa never asked us for money. no patreon, no donations, no super chats, nada. im happy youtube pays him, he deserves it

[@jonzie5627]

This is probably one of the most valuable channel’s on the internet, good job Project Farm.

[@ProjectFarm]

Thanks so much!

[@LordFalconsword]

He never disappoints and his testing metrics are better than any I've ever seen. He doesn't often have fancy equipment to test, but as long as its consistent, you get the comparison you need.

[@BetaBuxDelux]

@@ProjectFarmThank you for your work.

[@jumpinjojo]

*Channels

[@ReddawG1990]

I'd say this channel is top 5. If not top 3

[@cadetcadet1814]

Straight to the point, full of information, minimal outside opinions, not sponsored, saves me time and money..... this channel is GOLD

[@ProjectFarm]

Thanks! Glad to hear!

[@ShiftyKen08]

Yes, that's exactly why I subscribed!

[@stevege68]

I’ve been a professional Toyota technician since 1989 and being the largest manufacturer worldwide with Toyota and Lexus, it’s disappointing that some kits don’t have 12, 14, 17, or 19mm tools. But on the flip side, with automotive fastener tolerances, and the tool tolerances themselves, many SAE and metric sizes are interchangeable. 8=5/16, 11=7/16, 13=1/2, 14=9/16, 16=5/8, 17=11/16, and 19=3/4. They’re not exact but for automotive and most DIY projects, they will substitute without any problems.

[@EricLS]

Yeah, I get that a guy could convert, but missing 14 mm is like an instant DQ for me. Half the bolts on my Toyota are 14mm, gimme a break. Having to do quick mental math or look up a chart, etc is just a non starter.

[@ifixem9585]

Agreed, same story here. But why not, for the love of all things consistent, just throw the fractions away? Think about how long it took you to write that. It's silly, and ego is trumping logic. Who the heck wants to fish for a 19/64 or whatever drill bit? Why not just...I dunno, a 3? Or 12?

[@ducewags]

@stevege68 For years the 15mm was a far cry in sets. One set stopped at 14mm, the next set started at 16mm. Who even thinks like that. Also the 10mm might as well be made out of Plutonium, as it's a rare find for the everyday nut, bolt snap-off garage person. I am not the guy that suffers from a missing tool, or the wrong tool for the job. My tools have their own tools. Mine mechanic here.

[@loktom4068]

Sure, only heavy scratched and the start of rounding of the bolts and nuts. Been there. Done that. Learned, not the best. Only for emergency.

[@ACoustaDC]

A little blue tape inside the socket fills gaps nicely.

[@DinoJr.686]

As someone whos in their 20s and trying to navigate through life and build up some good tools to take with me through life, your videos are fantastic. Thank you for all the effort you put in. Youve saved me plenty time and money over the years!

[@ProjectFarm]

Thanks! Glad to hear!

[@stewartmelzer939]

an he is honest no phoney

[@MichaelBrown-wx6zq]

​@ProjectFarm could you please do socket organizers? As someone with a Mechanics set that always gets shuffled I'm dying for a permanent Solutions

[@xrude7875]

i'm in my 60's a little on the lazy side when it come to do home work , so i've got so i check @ProjectFarm before most purchases !

[@Crazyman23]

​@@ProjectFarmhonestly I love my craftsman box. Its box looks like the gear wrench box and things survive transit. Where my Pittsburg set of simular size always jumps slots if you sneeze by it. But I like the Pittsburg tool selection more since it has a few types of sockets the craftsman don't like star sockets and a few other things like a mini breaker bar.

[@RabbiJesus]

My first mechanic set was gifted to me by my mother on my 16th birthday. It was Napa brand and I scoffed at it. Well, that set lasted 23 years. It brought a tear to my eye the day that ratchet finally broke.

[@rickdunn7585]

I’d check and see if Napa is a lifetime warranty

[@RabbiJesus]

@@rickdunn7585 what’s interesting is how our standards of quality have decreased. That set was made when cheap imported stuff had to compete with American tools.

[@lukem7203]

You should check with NAPA as most of their tools have a lifetime warranty

[@ProjectFarm]

Thanks for sharing.

[@twistedhillbilly6157]

I'm sorry that happened to you.. there are support groups if you need some emotional help..

[@TanManFixes]

About 30 years ago, I got a Craftsmen set (made in USA) from my grandfather. To this day, it has been the best present I ever received. Since then, I lost one 22mm, and cracked one 8mm.

[@cuinican1980]

2002 from my mom, still have everything except the Allen keys. The rachet switch on the 1/2 inch broke. But I can still flip the switch with my finger. So have yet to replace it on warranty.

[@Bo-hb3eo]

Same here

[@littlejack59]

OG craftsmen stuff are legendary, there is a reason why the only big craftsmen fans out there are really old dudes, they just had it the best. Craftsmen never figured out how to get anywhere near as good of quality while making their stuff in China.

[@Marandal]

I've always been curious. how does a socket crack?

[@crunkosaur]

@@Marandal bad manufacturing, or ppl stick it on their impact when its not rated for impact.

[@stephk5255]

When my father in law passed away, his wife asked me to make up some tool boxes for his grandkids from his "extras." He had enough to fill all eight and I'm happy to say that most of what you suggested went into them. Not brand new and many not brand names, but hopefully will help in a pinch. Thanks for your testing and advice! Always solid!

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@frankievelasco1738]

Legacy tool sets are the best!!!

[@furyofbongos]

You can't buy tools of the same quality as his old tools still are today. Almost everything is massively inferior.

[@Low760]

​@@furyofbongosI can't agree there, but they are a lot more generic looking now compared to when they were made in little factories in each city. Like sidchrome.

[@bansheedearg]

I'm in my 50s and got a Craftsman kit when I was 18. All made in the USA. Served me well, the chrome cladding still holding, so many deep sockets. With two sons, I have a problem...

[@tactical_potato81]

You know what man I can't even begin to describe to you how helpful your videos are. I've based so many of my purchases on the videos that you've provided over the years. Thank you so much for all the stuff that you've done over the years and I hope you continue to do

[@ProjectFarm]

Thanks, will do! Glad to hear!

[@otarsulava]

Suggested video: Best CAMPING LANTERN Lights - battery capacity, light output, water resistant, reverse charging and drop test.

[@ProjectFarm]

Thank you for the video ideas!

[@project_poor_runner]

O-light’s OLantern 2 Pro has been my go to lately with a 10,000 mah battery.

[@redeyedfreaks]

Olight has a couple id like to see tested

[@NotTheRealRustyShackleford]

I vote Luci Lights as a backpacker myself...

[@Kosahdus]

Also outdoor brands like Black diamond, osprey solar luci model etc

[@NeoB-Lac]

I just bought my daughter the Quinn mechanics set for 279 no frills, no blow molding, just a bunch of tools!!!! Amazing entry level set

[@ProjectFarm]

Nice.

[@MrCar-Worker]

10 year mechanic, I’ve always liked gearwrench tools as an economy hand tool option. Not everything has to be snap on or Mac, I would recommend Gearwrench over any of these manufacturers before watching this video and it’s nice to see they showed up and showed out!

[@ProjectFarm]

Thanks for the feedback.

[@TheMonstervirus]

Except their gear wrenches, they're no built tough

[@debluetailfly]

I had a Mac dealer sell me a defective socket. Never did find him to get my money back.

[@draculakickyourass]

I totally agree with you. With all this sets together you won't be able even to change a turning light on most of european cars, because most of their plastic parts are installed with torx screws,so you would need a good set of torx and hex bits premounted in 1/4 socket ,with a screwdriver handle adapter,wich are not present in those tool sets,otherwise the simple bits will fall in the engine compartment,or inside the car's door,etc,just to make a good test of your patience😄..... I have a set i bought 5 years ago from an unknown local european brand (i don't even remember it's name,it's of 3 letters or so),it's only 1/4 and 1/2,no 3/8,but with it i dismantled most of my Renault Megane,remade the engine and other repairs. The only tools i needed aside was the oil filter adapter and a torq wrench for the engine head.

[@lupavo1738]

GearWrench is a tool truck brand, they’re just as bad as Snap-Off and Mac. I only buy tool truck brands on emergency or special unique tools that help me work more faster or efficiently. Although I’d say GearWrench does have better deals with even being featured on Amazon, that’s where Snap-On and Mac fails because all they want is money at MSRP for their overpriced crap.

[@heavymetalcreationz711]

I have a craftsman tool set that I’ve had for 20 years! I found one at Sears that has “Made in the USA” stamped on it. That’s as rare as hen’s teeth these days, but besides breaking the 1/4 inch drive, it’s been great. I carry it with me wherever I go, it’s gotten me out of a bind on many occasions. But in all honesty, it’s probably helped more random drivers along the way than it has helped me. I’m 43 now, and watching this got me nostalgic for the days when I could still purchase craftsman tools that were made here in the US. It would be great to see these companies bring manufacturing home. I know there are a lot of people that need jobs that would absolutely love to have the opportunity to manufacture tools in the US.

[@TuttleScott]

one of my first paychecks went to a craftsman tool set decades ago and its still going today.

[@hudsonwade1089]

I really wish they were still made here. I buy all Craftsman because the warranty is incredible with a Lowe's so close to me. I buy us made whenever possible, and all I have is a toolbox and tape measure. That's all I could find. Sad.

[@gordonwedman3179]

Well, l'm 72 and when I bought tools they were all made in the USA. Mostly Craftsman. You just need a time machine😁

[@hudsonwade1089]

@@gordonwedman3179 I wish. I'm 15 so no such luck aside from some tools I inherited from my grandpa.

[@ProjectFarm]

Thanks for sharing!

[@chrisyoung8170]

I think it would be great to take the broken stuff and see who is best about honoring the warranty.

[@JakeNaughtFromStateFarm]

HF is easy, as long as it’s in stock. GearWrench is pretty pain free as well (online), I just found the communication a little lacking. K Tool was easy, just need to have the receipt. Napa is also very easy, just sometimes takes a day if it’s not in store. Those are a few of my experiences, for what it’s worth.

[@NozomiShinobuCrest]

Husky, you just bring the broke tool in to a home depot and they'll just replace it, usually don't even need a receipt. Anything with the "lifetime warranty" they'll do it for.

[@RaindropConstruction]

​@@NozomiShinobuCrestcraftsman, just bring it in to Lowe's, find the replacement, and they give it to you for free. Kobalt same thing

[@hardtymz2517]

@@RaindropConstructionnot true if one tool breaks from a kit for Kobalt. Vise grips heads didnt line up up correctly in a three pack so I brought back the bad one and they gave me a very hard time since they wouldn’t break open a new set for one tool. They asked for me to bring the other two back with it and I said no, I’m here now. He just exchanged my one plier for the whole kit. Worked out in the end but pain the ass! Makes it worse that they print “any issues or if it breaks, please bring back to store for instant replacement.” The tool section guy (grumpy ol bastard) first said for me to mail it to Kobalt. lol WTF?! I told no, boss hog.

[@guyfawkesuThe1]

There is a larger HF tool kit he should have looked at.

[@gomd3rd]

Have the husky and was the base for my tool set. Really happy with it over 10 years later and 4 rebuilt cars and countless maintenance still love it.

[@ProjectFarm]

Nice!

[@JakonHilfars]

Literally every time I look for a new tool or kit or anything really I search for if you've done it yet. I'd say your reviews are always "VERY IMPRESSIVE" keep up the amazing work! Your videos have always influenced a purchase for the best tool for the job!

[@ProjectFarm]

Thanks and you are welcome!

[@chrisyoung8170]

I totally agree. To the point my wife says, "does 'that guy' have anthing on it?"

[@TheJMoney427]

The amount of actual time and work to find out what is best at what price range and in a somewhat scientific manner is spectacular. And the fact that he doesn't accept sponsors and buys everything put of pocket is amazing as well. KUDOS!!

[@ProjectFarm]

Thanks!

[@kestrel09]

Agreed!

[@vanblindguy4600]

Man, I just love your channel. Real world tests, honest reviews... priceless. So far as missing Metric sizes it would also be good to let people know that often there are equivalent SAE sizes and these missing sizes are often left out on purpose to save money and space.

[@cobuck4007]

The Craftsman case might seem inefficient, but the great thing about that is it makes room to add additional tools over time-unlike the blown-mold cases of the other brands.

[@ProjectFarm]

That's a great point!

[@pezpengy9308]

i have one and i like it but that case.... if you EVER get a tool cocked funny and it keeps the drawer from opening you are hosed. the drawers cannot be removed to clear the obstruction and i had to resort to cutting out the back of the case. sad day.

[@twentyrothmans7308]

Especially if you want a really nice tool you'll need a lot or will need another of, e.g. a 1/2 or 7/16.

[@rollthers3157]

I agree. And it's easier to find stuff.

[@methanial73]

Agreed and the tools are pretty good quality. I have a set like that in my car.

[@Patriot4TheTree]

"The most expensive brand that we will be testing today, is this 350 piece Snap-On brand mechanic's set, coming in at just under $23,600."

[@davouchi1]

😂so true

[@marclutz1390]

Imagine what the cost to buy each separately would be

[@nathanfisher4116]

$23,600 after taking out the second mortgage

[@HunterFain-cd1pj]

I need a rich uncle so I can get that set 😭

[@zaphodqi122]

Or $399 a month for a 36 month lease

[@jasonbroom7147]

I used to rely on Consumer Reports for knowing what to buy, but these days, I always check Project Farm, first! You are a huge benefit to the consumer. Thank you for spending the money and especially the TIME you put into these videos. It is much appreciated and makes Christmas shopping a lot easier! :)

[@ProjectFarm]

Thanks so much!

[@dwayne7356]

Here is my take. Buy the biggest, cheapest, most complete set you can when you are young and first starting to build up your tool collection. Then you'll learn what you need, what you'll break, and you'll have a spare when you upgrade. You'll also have a ready supply of cheap tools if you have to customize for one job. Of course if you are going to be a professional mechanic this may be a waste of money but for your average home DIYer it will work. Buying a cheap set of tools might surprise you. I have a set of cheap wrenches that have not failed me which I can't say for a Sears brand wrench (which I found out the hard way was not Craftsman back in the day.

[@colorinbetweenthelives7518]

I actually despise cases that are "efficient", especially blow molded plastic. Everyone will need to add a socket, extension, etc, at some point and having no way to add it to the kits case is actually *less* efficient in my opinion. Thanks for all you do!

[@trajectoryunown]

That and they won't hold tools in place after repeated removal and reinsertion, so you'll eventually wind up carrying it like the world's heaviest serving tray after a while.

[@ProjectFarm]

You are welcome!

[@adventureswithdavedave]

I had the Kobalt kit from a few years ago, and it was a bit different, what I liked most was the bottom tray was completely open and designed to loosely hold the included wrenches. Which left a lot of space for additional tools. I think that's what's missing with these kits, dedicated space for adding whatever you want.

[@danwildhaber8178]

Yup, a small toolbox or bag is superior.

[@joelang4709]

@@adventureswithdavedavei own the same kit, bought it last year for around $200. zero complaints other than some of the smaller sockets tend to get out of place

[@mcarston]

Still have my first Craftsman mechanics set from high school graduation 32 years ago. I use it every day...

[@aeromedical6776]

Craftsman tools back in the day were pretty bulletproof. I have several that I inherited from my Dad.

[@ProjectFarm]

Nice!

[@Efferheim]

A am fortunate to have outfitted myself with several craftsman sets from when they were made well. I am unfortunate enough to have bought craftsman tools recently. Dismal is an understatement.

[@davidjohnson5394]

Being a shop owner and experienced mechanic, I’ve been extremely pleased with my Gearwrench *243* piece sets. I have both the 6pt and 12pt set and they have almost everything I need. The main other thing I have in addition is the flex head Gearwrench ratchet set. I use sunex for impact sockets

[@ProjectFarm]

Thanks for the feedback.

[@suitedandbooted6612]

I got a Craftsman tool kit for Christmas about 25 years ago, when I first started getting into cars. I still have it and use it all the time. I know Craftsman is rumored to not be as good nowadays as they used to be when they were owned by Sears, but I can guarantee I’ve gotten the money out of this tool kit. It was definitely a gift that has kept on giving over the years. And miraculously, I think I’ve only lost one or two sockets, and only had to warranty replace my 3/8 ratchet one time. Still have all my 10mm’s. (Knock on wood)😂

[@jerbear7952]

Same thing. I also inherited my dad and uncles craftsman tools. Gotta love the smell of those vintage screw driver handles :)

[@harrywalker968]

e.t.c. socket set, bought 1973. still good, still use it.. when men were men, & sheep were scared.. ausie.. what does a dingo have for breakfast......................... a pis & look around.. what you get when you cross a kangaroo & a sheep.................... wooly jumper. whats wrong with geof................................ ahhh, he,s couple sheep short in the top paddock..

[@toddhoffmaster6057]

I have bought tools based on your tests and I really like my Gearwrench tools. Nice to see that they offer a nice quality toolkit as well.

[@ProjectFarm]

Thank you very much!

[@trvman1]

Ok, my 2 cents :) Don't care what kind of tool manufacture my mechanic uses. Most IMPORTANT thing to me is having a mechanic who knows what he is doing and it really GOOD at it. Don't care if he uses a $100.00 wrench or a $10.00 wrench.

[@afifdotmy]

@@trvman1 This video is intended for mechanics or DIY people. It doesn't mean it is unimportant if you don't use it.

[@trvman1]

Sorry you missed my point. @@afifdotmy

[@TranceFur]

@trvman1 It was a moot point. You were just spouting off on an unrelated topic.

[@SLDave]

I remember the happiness and satisfaction of getting my first large tool kit. It's Mastercraft brand, sold by Canadian Tire. Decades of auto mechanic work later, I still have it stored under the floor for long road trips.

[@ProjectFarm]

Nice!!

[@xIntoThePitx]

Yes, they are my choice. Lifetime Warranty without receipt!!

[@Durataur]

Mastercraft maximum is my go to now, it’s just rebranded gear wrench!

[@NietzscheanMan]

Usb c stuff only pls

[@marcfarrell9741]

@@ProjectFarmcan you do a review on Milwaukee hand tools

[@darkerbinding6933]

Great review. I feel the most valuable thing you tell people in this is to make sure you own one and carry it with you in your vehicle, whichever one you buy. I can't tell you how many times I've stopped to help stranded motorists and was successful because I had a full set of tools with me. Thanks for the great video.

[@ProjectFarm]

Thanks for sharing!

[@wildbill23c]

Its great to have all the cool tools, but they don't do you any good if they're not with you when you need them LOL. I don't carry fancy tools when I go get parts from pick a part yards I carry the cheaper stuff with me, occasionally while you are in or under a vehicle working on something, someone will walk by and swipe stuff out of your tool bag, or box....so having the cheap stuff tends to keep people with sticky fingers from walking away with your stuff. A well stocked tool box for travel is a must have....maybe you don't need it but you might get someone else going....out west there can be a hundred miles or more between towns, getting stranded along the highway is not good, and sometimes you don't have cell service either.

[@darkerbinding6933]

@@wildbill23c I live in the wide-open West. I've helped many a stranded person that no one else would stop for. I don't have a pre-packaged set and I carry a lot more than what is shown here but I did buy my daughter a nice packaged set and I've taught her the basics of what she needs to know to 'maybe' get out of trouble on her own.

[@bansheedearg]

I would love to hear a few stories. Helping strangers is does the world good, a kind act ripples outward, because happiness, relief, and kindness are all contagious. Look here, your very comment made me happy.

[@darkerbinding6933]

@@bansheedearg OK, why not? This isn't exactly on the on-the-road type story but for the people it was. I was headed home from work one Friday evening. It had been a long day and week and I was stopping at the store to pick up some food my wife had asked for. When I parked in the lot, there was an SUV with its hood up and three 30-ish-year-old women looking at the engine. I sat for a minute and thought about it. I was hungry and tired, but I just couldn't leave them broken down in the evening in a small town where there were very limited options for help. I approached them and asked what the trouble was and they said it would not start / no power. I told them I had tools and I'd see if I could help. First check was the battery cable connections and when I went to loosen the + cable, the whole side pole terminal came right out of the battery. Well, the problem was easy to diagnose. The grocery store had an auto parts section and batteries so I sent them in to get one. Nope, they didn't have one that fit but there was a parts store not far away. I told them I'd give them a lift to buy one, but they were wary of getting in a man's car (smart). I drove and one of them walked to buy a battery. I drove it back and she walked back. When I went to remove the terminal from the cable (vise grip on the terminal to hold it) it was welded solid to the battery cable end. Back to the parts store for a new cable end (the full cable would have taken a long time to change) and this time one of them trusted me enough to hitch a ride to buy it. I cut the end off the cable, put the new one on and they were running again. They tried to pay me, but I told them to pay it forward to someone that needed it. Besides, I got more than money. I felt good about spending an hour of my time that meant far more to them than it did to me. [edit: They were about 40 miles away from their destination, where their husbands had a rented beach house.]

[@jansonsynder]

When I turned 16 in 1990 my dad got me a Craftsman Set. I'm not a mechanic, but I'm no novice. I still use that kit today. I've replaced the box by now. What that kit didn't come with was metric wrenches. That's about all I've had to add. I've picked up duplicates to fill task specific tool boxes like oil changes and such.

[@ProjectFarm]

Nice!

[@Ramsarius]

The toolbox recommendations were a nice garnish on the video. Please consider doing more like it in the future. You have lots of videos of one-off tool comparisons, but it would be nice to see a video bringing many of them together into another cohesive, thoughtful and purposeful tool kit.

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@hibiki54]

I work in the building trades and regularly use those all-thread couplings. Those couplers will always vary in size depending on where they are manufactured and what material they are manufactured from. The cheapy chinesium couplings do tend to be softer and will have several thousands variance in external size because of the galvanizing process or how long/short they sit in the deburring tumbler. I'm not surprised that some wrenches slipped easier than others.

[@ProjectFarm]

Thanks for sharing!

[@bansheedearg]

Insightful, thank you.

[@JJ20kil3r]

This channel once again comes in to save my behind. I had gotten out of the field due to DUI and job closing down. Shortly after 3k worth of tools was stolen from my car (snap on, matco etc) now i recently found a very good shop, but was panicking on re investing into the lost 3k worth of tools. This was a good starting point to get the most important tools

[@RicardoSilvas-uq6wn]

Harbor freight now sells 1/4 3/8& 1/2 inch socket sets now for a good price especially if you use the 20 percent off coupon. They're not Matco but they'll get you back in the game. Edit: They also come with a lifetime warranty as well.

[@ProjectFarm]

Thanks!

[@coo-ctobiotech3037]

So, I just bought 3 of the referenced Gear Wrench kits: 1 for me (of course), 1 for a son just entering aeronautical engineering school and another son who works with me on many different projects - this one will be his car kit (he's driving 2016 RAV4, just replaced all wheel bearings, a loud transmission bearing and complete brake disc pads - about $2,300.00 project - wants to "drive the wheels off it" - but girls his age may not see that level of resolve attractive - could be the cracked windshield, I dunno....)

[@ProjectFarm]

Thanks for sharing.

[@vurtruvious5280]

hey it beats the other guys my age who are still driving 90s honda's and just deleting the exhaust/catalytic converter

[@james94582]

Shouldn't have replaced the wheel bearings... Then he truly could have driven the wheels off of it!!

[@ktm42080]

Brought back memories of my first mechanics socket/ratchet set. It was a Craftsman (1994 so it was still made in USA). It skipped more than a couple important sizes and I threw the black plastic folding box away, but I still have every single piece from it. Tool sets are going to be a matter of choice, anybody who uses tools will make good decisions as to what they want or need. Great video!

[@catsaregovernmentspies]

Same. I think mine was a 99 peice set I bought around 94/95. The case is long gone, but I bought socket rails for them and the whole set is still in my toolbox today.

[@codemang87]

I just got the craftsmen box featured in this vid and the case actually feels very sturdy. Especially the handle. It feels like its actually built to carry. Plus the versatech locking mech has me interested in adding some extra storage on top. I'm not how well that functions yet tho.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@TheACEJester]

I have had the Pittsburgh (got on sale for 99) set behind the seat of my single cab truck for a few years, and it’s saved me a few times. We even rebuilt the engine with it. It’s nice to see that with so many great choices out there, even the cheaper set can get real work done.

[@ProjectFarm]

Thanks for sharing!

[@nordicgod32]

New test idea-portable air compressors. There are so many on the market now, but it seems likely most are junk. That’d a super helpful video…

[@ProjectFarm]

Thanks for the suggestion.

[@underdweller]

​@@ProjectFarmSeconding the portable air compressor suggestion. Finding a compressor in the sweet spot of enough pressure for all my tools, big enough tank to keep the compressor from running the entire time, and not so big that it's a massive PITA to move from my van to the job site is a hard task on a limited budget.

[@amberm4746]

Yes please

[@drippingwax]

Searching KZbin for "portable air compressors," I see "Which Portable Tire Pump is Best? Let's find out!" "Best Tire Pump? Let's Settle This! Milwaukee vs DeWalt, Makita" and "Which Cordless Tire Inflator is Best? DeWalt, Milwaukee, Air Hawk, Ryobi, Bauer, Chicago Electric"--all by Project Farm. Do any of those fit your description? :D

[@RaindropConstruction]

​@@drippingwaxnone of those are compressors, so no

[@justinRoo88]

I bought the craftman set for like $90 at lowes. I keep in truck and use for handyman jobs. Been great for the price nothing has failed yet after 3 years does most what i need. Just need to throw in some pliers with it and you can fix most vehicle and household problems.

[@majist0]

Happy Thanksgiving Todd! The continued existence of this channel is of the utmost importance to everyone. Todd's recommendations, including JB Weld (Fixed a broken plastic to metal hinge on my printer) and my new best buddy the Gooloo jump pack, have saved me so much money it's nuts not to give some back.

[@ProjectFarm]

Thank you for supporting the channel!

[@danieljohn6781]

@@ProjectFarmhey is it possible you could do a part 2 but with a British brand called Halfords too it would be interesting to see how the uk based tools compare to the US brands

[@JoeTheDIY]

This was an amazing amount of information stuffed into one video. This is probably the most useful video I've ever seen on KZbin. Valuable information here that cannot be found elsewhere. Thank you sir!

[@maskedfisherman333]

This guy deserves so much more subscribers, for our own good

[@ProjectFarm]

Thanks so much!

[@iro6758]

​@@maskedfisherman333"-for our own good." Honestly, I'm beginning to think that this guy has done more for us than most high profile members of government.

[@maskedfisherman333]

@iro6758 Can you imagine if he was president of the FDA and the rest of the departments that should be keeping an eye out for people

[@raybeem3]

Well said! I just subscribed! I’m never going to miss another one of his videos!

[@musselmanboys1529]

Just used my Husky set to replace a catalytic converter. It happened to be located in the rear part of the engine bay. I was pretty satisfied with how well the tools performed in a tight space and removed the rusty exhaust nuts. On one occasion it actually removed the nut and stud together when the nut was stuck!

[@ProjectFarm]

Thanks for sharing!

[@bobbylibertini]

I just bought the Gearwrench set, and I LOVE it! I'm so glad that I watched this video, as that is what turned me on to this set. Interestingly, Gearwrench seems to have made various variations of this set, all with the same part number...so to anyone looking to buy, be careful and make sure it has what you want. I managed to track down a set whose 1/2" drive sockets go up to 1-1/2"! I just wish they would have included more 1/2" drive stuff- like deep SAE and shallow and deep metric sockets...but still, it's the most comprehensive set you'll find, and great quality for the money. I mean, all of the manufacturers pad their sets with a ton of 1/4" drive stuff to make it seem like you're getting more than what you actually- but who doesn't already have a ton of 1/4" crap, and driver bits and crap?

[@ProjectFarm]

Thanks for the feedback.

[@abepeterson]

Glad to see GearWrench hold up, I started building cars a couple years ago and the first thing I bought from them was their rounded bolt removal sockets and have been sold on their products since.

[@ProjectFarm]

Thanks for sharing!

[@AnthonyRBlacker]

My wife got me the DeWalt socket set -very similar to the one you're testing (but it was on sale for $99 so it was a GREAT price) and I have a GearWrench ratcheting combination set I picked up at the Orange big box store for $69 on sale - a very good price - 90 tooth, set that goes 5/16" - 7/8" and 8mm to 19mm. I lucked out with those 2 sets, they pretty much stay in my van at all times and I use them for most of the work I do. My 10mm ratcheting wrench broke and GearWrench replaced it with a photo of the broken ratcheting end, proof of purchase and an email - 10 days later they sent me a brand new 10mm ratcheting combination wrench AND it was the reversible version - an upgrade to the one in the set that I bought. I am a very happy customer! Thank you so much for buying all these tools and giving us your data!!

[@rodfreess6019]

Dewalt is a nice socket selection, but no 12pt sockets. Those are needed on some cars. It does include torx and allen sockets.

[@PcItalian]

I got the Husky brand on sale for $99 6 months ago, I ended up getting two, one for my truck one for the office. It's decent enough for an emergency.

[@ProjectFarm]

Thanks for sharing.

[@markmariz8618]

I have a harts box, a durlast, and husky, and craftsman, and got a gear wrench box last month empty it all out into my big rolling tool cart best kit ever I owned nice quality and comes with pretty much everything u need as a starter

[@ProjectFarm]

Thanks for sharing.

[@JohnRaySalazar]

This is fantastic! The amount of time and money you put into this is beyond comprehension! Thank you so much PF for helping us keep more money in our pockets!

[@ProjectFarm]

Thank you for the positive feedback! It means a lot to me! It was indeed a lot of time and expense, and I hope it helps a lot of people choose the right tools for their needs.

[@connorbnjgg67754]

Thanks for making these videos, keeping these companies accountable.

[@ProjectFarm]

My pleasure!

[@clvrswine]

Accountable? How? They are a for-profit business. Nothing accountable about it.

[@connorbnjgg67754]

@@clvrswine we spend money on the best value and therefore reward the people making the best products.

[@OGSontar]

Very impressive. These tests not only show the tool quality, but are an interesting insight into the mindset of the manufacturers. Thanks for all you do for us, Todd, and I hope you had a great Thanksgiving.

[@ProjectFarm]

You're welcome. Glad you enjoyed the video!

[@BilTheGalacticHero]

I bought a Craftsman mechanics tool set when I was 16 and I'm still using it today, 38 years later. Everything is still original except for a socket to replace one I lost and all the ratchets (which were covered under warranty). I use these tools almost every day. Never skimp on a good set of tools!

[@ProjectFarm]

Thanks for the feedback.

[@suprstng6]

Man, your attention to detail for testing is second to none. This was very informative. Thank you for doing what you do! Happy Holidays

[@ProjectFarm]

My pleasure!

[@d.vinny1997]

This has got to be one of the most useful videos ever posted on KZbin! I have a craftsman mechanic set and I’ve thought about getting the kobalt set for quite some time but now I think I’ll go after the gear wrench set next time I’m in need. Thanks a bunch!

[@ProjectFarm]

Thanks!

[@tmacmi9095]

I used Gear Wrench ratcheting wrenches at work and really liked that they were a slimmer design than other brands, which proves to be helpful in many applications when working in tight spaces.

[@ProjectFarm]

Thanks for sharing!

[@Knowa7]

I feel like they are pretty bad, they break pretty easily and the directional switch is always changing directions when trying to use it. It's annoying trying to loosen something then it gets tight again lol. I mostly used them on John Deere equipment with bigger sizes such as 24mm and 30mm locknuts being the most common so maybe the smaller sizes are better. We aren't allowed to use gearwrench impact sockets anymore because they have broken so many times and thrown shards across the shop to the point it's a safety issue.

[@SockyNoob]

I love how you included stuff that was previously reviewed for the emergency toolbox in the end.

[@ProjectFarm]

Thanks!

[@chubbyjohnson5480]

I paid up for 3 Tekton sets. Each drive was its own set, a complete run of sizes. Excellent sets

[@ryanfeldpausch858]

I got their 40pc set, it's a dinky little kit, but man it's just about perfect and we have 6 crews on my jobsite and it's such an effective and clean kit at least one other team borrows it every week.

[@fransiscoscaramanga674]

i also own a Tekton 3/8 Ratchet set, very impressed by them

[@ProjectFarm]

Thanks for the feedback.

[@RabbiJesus]

That’s my new favorite brand.

[@lashlarue7924]

Same. I have all three and use all three. ❤🫡

[@drone1756]

That gear wrench set is extremely impressive. It’s what I will save up for.

[@ProjectFarm]

Thanks for the feedback.

[@MrHoosSpiffy]

It is on sale for $199 right now at Home Depot. At that price point, it knocks everything out of the park.

[@angryw4nderer]

​@@MrHoosSpiffythey must have just recently started selling gear wrench. A few years back I had to go directly to them

[@Otis884]

As a maintenance mechanic for 35 years, before I retired, Craftsman were my go to hand tools and Kennedy my go to tool box. Loved the no questions asked tool exchange at Sears.

[@TKettle]

Craftsman is worse than Harbor Freight. Complete trash. At least with HF you expect junk and are pleasantly surprised when it's not, but Craftsman charges legitimate tool pricing for ratchets that don't even ratchet. Their tools are actual garage and a waste of metal. Craftsman is what happens when investors are given 100% decision making authority and they completely ignore all quality assurance and practicality measures.

[@ProjectFarm]

Thanks for sharing!

[@byanymeansnecessary9329]

You can now exchange broken craftsman tools at Lowes, almost no questions asjed

[@aznkingz00]

i dont know what i would do without your tool reviews, made my purchases so much easier and knowing im getting the best out of every tool i use.

[@ProjectFarm]

Glad to hear!

[@gregkimura5906]

Great comparison! I've noticed that the HFT tools seem to be getting better. I remember when they were super cheap and considered disposable! I did walk into my local HFT about a month ago and I was shocked at how expensive their tools have become. I also noticed how empty the store was (customers). I've driven across country in a nearly 50 year old car a few times - across country is from New York/New Jersey to Southern CA. Did the cars break? Yes they did. What tools/supplies did I have? A cheapo small socket set (one of those junky no-name sets), a few screwdrivers, one small vice grip, adjustable pliers (not nice like Channel Lock), wire (small roll of 16 ga stranded), duct tape, electrical tape, zip ties, silicone tape, a blanket to lay on, jump start box, 5 quarts oil and a jug of antifreeze. How did we do? Two success stories and one failure - car had to be trucked home. Your videos are awesome! Keep up the great work!

[@ProjectFarm]

Thanks, will do! Thanks for sharing.

[@lupavo1738]

Pittsburgh brand is still relatively very cheap and still disposable. You must be talking about the Icon brand because that’s where the Harbor Freight quality tools begin and they’re definitely not cheap.

[@jbwilcomb]

I have owned that same DeWalt kit for about 5 years now. It's been amazing! I've done many automotive projects with it and it has never let me down. DeWalt does sell a slightly smaller kit that does include wrenches as well.

[@ProjectFarm]

Thanks for sharing!

[@iker42]

They also offer a 204piece set with wrenchs. I've had that set for about 10 years and it has had every socket/extension I've needed in that time.

[@B16CXHatch]

I bought one of the last US made Craftsman sets several years ago at one of those smaller Sears (I think it was called a Sears Home Center). That kit has been one of the best things I ever spent money on. Still use it regularly. The wrench selection isn't the best and it could use another deep well or two but still great though. I keep it on my tool cart along with a bunch of my other commonly used tools, and I have a small tool chest that houses everything else. I've never bought any other ratchets than the three in the kit.

[@ProjectFarm]

Nice!

[@TotallyTubularFeyo]

I purchased the GearWrench kit last night from HomeDepot. The 243 piece kit was not available but they have the 232 Piece kit on sale right now, from $320 to $200…. $120 off. They sell the same kit without the handle grips. Has to be one with the grips.

[@usernameisusername]

Its amazing to me that they can sell these kits on sale for so little!!

[@ProjectFarm]

Great point! All of these kits are worth the price in my opinion.

[@markm0000]

They're still making a lot of profit. The thing is they want new mechanics to buy these so they'll consider buying more of the same brand.

[@froggichef]

I usually go to reddit to find unbiased opinions of various things. When it comes to looking for tools, I always go to your videos. You are doing a tremendous amount of people a huge favor and I truly appreciate it.

[@ProjectFarm]

Thanks so much!

[@TheRoadhammer379]

Reddit and unbiased... what an oxymoron.

[@HydratedBeans]

@@TheRoadhammer379they’re not unbiased, but I trust the obsessed redditors on which vacuum to buy. They’re too psychotic to be bought off

[@TheMarlboro-Man]

@@TheRoadhammer379🤣🤣🤣

[@harz426]

Reddit is trash.

[@dirtnaps]

I love the extra input on supplemental tools and supplies to always keep with you in the toolbox. . This was a fantastic addition to go over as I often wonder what I have/would need if stuck in the middle of nowhere. Another few items to add are a good quality Flashlight that takes rechargeable batteries, and 2 or 4 slot rechargeable battery charger and a small foldable solar panel to use with it. Another thing to consider, while not a tool, some of the Firestarter mini kits that are no bigger than 2 fingers.

[@Mike-sy6oy]

Firestarter kit is good but also keep a few bic lighters! They're cheap and easy.

[@dougbirkett2005]

better non-rechargeable batteries (problem with lithium and air-tight (waterproof) flashlights

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@fakename287]

Instead of rechargeable batteries, a charger, and a solar panel, you could just buy a normal flashlight and a pack of double A/triple A batteries, lithium ones if you want to be fancy Now if you run out of charge you can just pop in new ones instead of waiting for the sun to come up so you can recharge your batteries lmao

[@mackebest1995]

@ProjectFarm as a mechanic i totaly agree with having a pair of knipex water pump pliers easaly one of the best universal tools you can have, but one thing i realy must recomend and i think everyone should have is a 3/8 1.2 inch long extension of the "wobble" type in 90% of cases this is a better option to the universal joint and for working on cars in tight spaces its many times the perect lenght you need when other extensions are to long and i realy mean it its just one of those things that you didnt know you need untill your tried it.

[@ProjectFarm]

Thanks for the feedback.

[@JoseGarcia-hf4wl]

I’ve bought husky tool set not knowing if it would fit in all the spaces but this video has showed me I made a great choice with. It is missing some essential sizes but it’s well worth the money. Haven’t had to buy the same tool twice thanks to it. I have broken the adapters on rusted nuts and bolts but have gotten impact adapters instead to prevent it from happening again. Great video as always. I’ve been watching you for over 8 years and have learned so much thanks to you

[@ProjectFarm]

Thanks for watching! Glad to hear!

[@RicardoSilvas-uq6wn]

I got the Tekton 3/8 master set (6-24mm& 1/4-1inch no skips) and 1/4inch matser set, I like the no skips. I found buying the master sets, wrenches and master torx sets is a better value and not far off in price from the Mechanics sets. I hated reaching for and not having the size I needed. Still a great video!!👍🏿

[@ProjectFarm]

Thanks! Thanks for sharing.

[@madjackgamingandfitness498]

I only bought the tekton 3/8 set with 12pt sockets. It was pricey, and the mold sucks for holding sockets. but their sockets have just been too good. Rarely do you find a full channel deep socket and it's great for tight areas, and jam nuts, where regular sockets hang.

[@alexfinsel9423]

I would love to see a comparison of the various air compressors... especially the pancake ones that all seem to be the same except for color. Keep up the great work. You are the real deal, one man Consumer Reports show for regular people.

[@ProjectFarm]

Thanks for the suggestion.

[@FrankieMahon]

What can I say that hasn’t been said about this channel? Dude, you’re the best. I’ve been taking your advice for years and you’ve always been spot on. Thank you for your detail and hard work. For this video in particular I’m not too surprised about the winner. GearWrench is fantastic. I love the extra gear you’ve added to complete a full home kit. I’m putting together a set for my daughter and I’m going with ALL your suggestions with this GearWrench as the core. Thank you and keep up the good work!

[@ProjectFarm]

Thanks, will do!

[@JD-um8sq]

another banger! my first kit was a 100 piece husky and it took me years to grow out of it. I have since built my own kit that fits my needs but these larger kits seem super nice

[@lucasstiles8012]

This is the kind of video that should be shown to new hires in the auto industry. Lots of choices, very clear. Great way to start a love for tools.

[@ProjectFarm]

Thanks for the feedback.

[@mueckenhoeffer]

Great review! I especially like you covering the box full of "extras" one might wish to augment their toolkit with. Torx drivers, an inexpensive multi-meter, and an ODB reader are good ideas for an on-the-road kit.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@TehButterflyEffect]

Torx drivers? You must drive a Chrysler product. LOL

[@random10730]

thanks pf for putting in the work and taking the hits so we dont have to. having you putting in the hours and doing the work to allow us to make the best and most knowledgeable choices on our purchases is a life saver and especially in the current financial crisis, you save us so much money in preventing repeat purchases. you are invaluable and we are not worthy.

[@ProjectFarm]

You are welcome!

[@bullettoof1732]

I bought that same Pittsburgh set years ago on a BF sale for 100$ Not sure if it still goes on sale for that price. It's had pretty much everything I've ever needed for home use and car repair/maintenance and never failed me. Very happy with my buy 👍

[@ProjectFarm]

Thanks for the feedback.

[@jeffhogueison1656]

On sale again for 99 at Harbor Freight. I am getting one for my car bc though not the best tools but decent enough for the price and better than nothing sitting on the side of a road with no tools 😊

[@homelandertv]

I’ve had a shittsburgh 1/2 inch ratchet disintegrate out of nowhere while doing my drop shackles

[@herbplaxe]

This is a great video. Keep up the great work. GearWrench does seem to be expensive, but it's most versatile down the road. No running to the store to get a wrench size. Just know that you are saving the internet shoppers lots of time with this video. You cover all the stuff I would want you to cover!!!

[@ProjectFarm]

Thanks, will do! Thanks for sharing.

[@theprayingman]

Master ASE Technician Gearwrench and husky are all I use. Gearwrench at work Husky at home for personal vehicle maintenance/hobbies and side work.

[@ProjectFarm]

Thanks for sharing.

[@TheSM4ster]

You’re probably the best ressource here on KZbin for theses comparisons! Can you do a video summarizing how you would build a new professional homeowner’s tool box!

[@ProjectFarm]

Thanks for the suggestion.

[@SuperJ213]

It's interesting/sad that the newer Craftsman kit doesn't have as many tools as mine does from the 90's. Granted, the kits were more expensive back then (I can't remember if it was $200 or $250 back then). I had to buy my own tools for work, but this kit has helped me with a lot of home projects and work on several cars since then!

[@bradywilliams2666]

I bought a pretty decent size kit from Craftsman back in the 90's. I still have lots of them including all the ratchets. My wife bought me a new Craftsman kit couple yrs ago. Broke every ratchet in that kit. They are junk anymore.

[@schematic671]

The Craftsman kits from 20 years ago started at 6mm and ended at 22mm from 1/4, 3/8, and 1/2. The 1/2 ratchet could remove axle nuts and crank bolts. The kits now are 😢😢😢

[@OverlordQ]

Craftsman has been coasting on name for a long while, especially after the sale to Stanley Black & Decjer

[@freemansgarage]

The old Craftsmen screwdriver handles smell amazing.

[@3clubforever]

I thought the craftsman set did pretty well for the price

[@jeffreybaker7406]

One good thing about the Craftsman is that it’s part of the stack system. You can add extra storage for items that you want to add.

[@philnt]

the craftsman stack system is also compatible with dewalts

[@txlonghornremodeling]

Plus no matter what all those craftsman hand tools will be fixed or replaced for free if they break

[@bluearcherx]

@@txlonghornremodeling no matter what unless the craftsman brand disappears again. but it's all made in china or taiwan now so what's the motivation?

[@ProjectFarm]

Thanks for the feedback.

[@txlonghornremodeling]

@@bluearcherx everything is made overseas. Just like your cell phone. Who cares.

[@ruannaude8197]

Test idea water pumps. Irrigation, transfer, shallow well pumps, jet pumps, deep well pump. Farmers and hard workers need to move water cheaply. Great job, sir. I have admired your work for a long time and that you try to reply to all comments. That's commitment.

[@ProjectFarm]

Thanks! Thanks for the video idea.

[@alexanderreyes47]

I work at Ace Hardware and always recommend Gear Wrench tools to my customers for their performance and value.

[@ProjectFarm]

Thanks for sharing.

[@_JohnRedcorn_]

About a year ago, I left my old school craftsman 155pc mechanic tool set at a customers house (who pretended as though they never saw it) I had it for almost 20 years and it was great but is now lost. You released this video about a month ago and I bought a new set about 3 months ago. Wish I could’ve referenced this video when I was researching which new kit I wanted. I decided against dewalt mostly cuz I didn’t like that the top side tools were held in place by friction and I just know those things were going to wear out and stop holding. I WANTED the gear wrench set but decided to go back with craftsman due to price and got this exact same set. I’m pleased with the results, and my decision to go with craftsman (even though I would’ve ultimately preferred the gear wrench) Thanks for what you do brother

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@DroneStrike1776]

I'm happy to see something I actually bought. I got the exact DeWalt set and it's a pain to get the sockets out. It's great for your backyard mechanic stuff.

[@ProjectFarm]

Thanks for the feedback.

[@parochial2356]

Todd, thanks for posting this review. Really opened my eyes as to the number of "missing" sizes in the combo wrenches. Anyone looking to buy a kit like these needs to do a detailed inventory of the included sizes and compare there anticipated needs.

[@joeschannelish]

I've had a husky kit for a few years and love it. I haven't found a need to buy more wrenches but I did buy an adjustable for the once in a while I need a duplicate. I do most of my work on my jeep so most bolts are within the sizes they give you. I did end up buying an impact socket set because I dont trust 12pt sockets on my breaker bar so I have a bunch of 1/2 in sockets. I also love the warranty. Lifetime no questions asked replacement in store. As long as Home Depot is in business I have a wrench set.

[@ProjectFarm]

Thanks for the feedback.

[@nedsurf1876]

Good video idea. These kits are good for people starting with no tools. Ill carry around a general kit like this in a van or truck because I might work on things other than the vehicle. For smaller vehicles like cars I've found assembling a tool kit specifically to the vehicle makes a lighter and smaller tool bag to keep in the car.

[@kftc1980]

Yep. For a Toyota or Honda there are only a few MM sizes needed for most things. I assume that applies to other makes. Plus you want 6pt sockets, these sets usually come with 12pt. Hex bit sockets are far more usable than allen wrenches.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@cidercreekranch]

I purchased an Craftsman set back in the early 00s, when the tools were still made in the U.S., and that set looks much better than the newer set. Even the old case, which I ditched in favor of a rolling tool drawer, appears to be much better quality than the flimsy trays that come with the version you are reviewing.

[@_Frank_the_Tank]

Craftsman tools have gone waaay down hill in quality since sears sold them off. I bought a Craftsman 250(ish) piece set back in like 1995, it came in a sturdy metal tool box with 4 slide out drawers and a flip top storage area on top. Has a full assortment of SAE and metric sockets in 1/4, 3/8, and 1/2 sizes, the sockets all came clipped onto metal socket trees. It has the full assortment of wrenches. Has actual screwdrivers, couple pairs of pliers, a hammer. Etc etc... Everything in it is an actual tool, not just some bit driver with 90 different bits to inflate the tool count. I still have the set, it lives in my hallway closet for small indoor projects so I don't need to go out to my main toolbox in the garage.

[@ProjectFarm]

Thanks for shariing.

[@kolt4d559]

Even with 9 tool kits it is rumored that Todd still has a hard time finding that 10mm socket. 😉

[@NickFrom1228]

I literally went out the other day and bought spare 10mm sockets. I think a squirrel has a nest somewhere that is lined with my missing 10mm sockets.

[@Eduardo_Espinoza]

$10 a piece, sir. 🐿️@NickFrom1228

[@bullettoof1732]

💯 😂 Don't forget the 10mm combo wrench as well

[@billman6364]

just get a Red dog socket and youre all set, lol

[@shootstraight91]

My friend bought a snap-on set on ebay and the guy that was selling it wrote ''all original pieces EVEN the 10mm''. I said to him ''It's to good to be true''

[@appleztooranges]

Bought the GEarwrench for $199 during Black Friday with the ratcheting ratchets. Love it

[@ProjectFarm]

Thanks for sharing.

[@mikespence8895]

I keep the 225 pittsburgh tool set in my Tahoe. Cant beat it. Its nice and slim and and can pick it up for 100 bucks on sale. Gets you out of a jam.

[@ProjectFarm]

Great point!

[@HAL-dm1eh]

Has your Tahoe been good? Thinking about getting a full size SUV while the getting is good and Tahoe/Yukon seems to be the best overall.

[@mikespence8895]

@HAL-dm1eh I have an 02 tahoe. Going on 180k miles. It's a great vehicle. The 06 and below I believe don't have the active fuel management system. If you can, I'd avoid 07 and up? I forgot the year it switched. But it's in that range. Easy to work on and parts are easy to get.

[@mikespence8895]

@@HAL-dm1eh I live in Wisconsin it's rusted out and still going strong.

[@kevinr5187]

@@HAL-dm1eh We have an 02 Tahoe bought brand new, still have it. The thing is a tank, 243,000 miles and still going. We also have a 22 Yukon SLT and love it, the thing is huge inside and camera is just crazy you can see every angle outside the vehicle.

[@robertbeard976]

This guy does real life real world test thanks man

[@splender88]

Any one of these sets would probably work for just general purpose usage I would think but it is amazing how the price of tools has come down. I was given a complete Craftsman mechanics tool set as a teen about 40 years ago and it cost about the same as now. I also recommend carrying zip ties with your emergency kit I use them for everything.

[@ProjectFarm]

Thanks for sharing!

[@koltonknox9235]

I have a more extensive set of gear wrench tools from when I was a diesel tech and I have to say I've been using them on projects for the last 7 years doing everything you could think of on a car or even heavy equipment and the biggest failures I've had was one ratcheting wrench stripped out, a 3/8 to 1/4 adapter broke, and my 90* angle pick broke. But to also be fair to the tools they broke being used in a manner they were not intended to be used. Great showdown and keep up the good work!!

[@ProjectFarm]

Thanks, will do! Thanks for sharing.

[@isaakweller5797]

Thanks for doing these product test. They are fun to watch and educational. Would you consider doing a video on OBDII scanners? Perhaps getting into some budget professional ones and cheaper generic code readers? Thanks!

[@ProjectFarm]

Thanks and you are welcome! Thanks for the suggestion.

[@larryjohns8823]

Great testing😊 The problem with these sets is: 1. The tools will more and more fall out of their storage spot. 2. You will always need to add an extra tool, but have no extra storage in these cases.

[@makojuicedaniel9307]

Exactly! I had a 450pcs craftsman set with a similar plastic box, it had some room on the top for extra but the drawers sucked, those side flap type locks will fail every time.

[@goodun2974]

The fiam pad used in between the halves of a clam shell case to hold the parts in place is a half-assed, temporary solution, and the foam will get greasy and deteriorate in short order, or be blown away by the wind. Black plastic cases absorb all the available light; I want to see them made of red or yellow or even blue plastic so that it highlights the tools and the sizes marked next to each socket. Plus you can write on it and mark things with a Sharpie if it's red or yellow or blue.....

[@Comm0ut]

I carry an ammo can or two for my loose tools and have a variety of sizes. Ammo cans are gasketed tough storage and work a treat.

[@dyer2cycle]

I want to see them made of metal, steel or aluminum, and not plastic at all...@@goodun2974

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@Franklin-p9q]

Having the right tool for the job, readily available when it's needed, is one reason why tool sets are great.

[@ProjectFarm]

Good Point!

[@ShellShock794]

My step mom's dad bought me a Craftsman ratchet kit with 3 drawers as a graduation present and that thing has been one of the greatest gifts I've ever recieved in my life. I've never once needed to buy a new/different socket or wrench. It's not super nice nor is it fancy but it has done thousands (if not tens of thousands) of jobs. Every single person should have one of these

[@ProjectFarm]

Nice! Thanks for sharing.